diff mbox

driver/mtd: IFC NAND: Add support of ONFI NAND flash

Message ID 1333949122-10401-1-git-send-email-prabhakar@freescale.com
State Accepted
Commit 59fdd5b96aa633ffd40e8ce314f126206dfff86f
Headers show

Commit Message

Prabhakar Kushwaha April 9, 2012, 5:25 a.m. UTC 
- Fix NAND_CMD_READID command for ONFI detect.
  - Add NAND_CMD_PARAM command to read the ONFI parameter page.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
---
 Based upon git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 
 Branch master

 drivers/mtd/nand/fsl_ifc_nand.c |   22 ++++++++++++++++------
 1 files changed, 16 insertions(+), 6 deletions(-)

Comments

Artem Bityutskiy April 21, 2012, 5:39 p.m. UTC | #1 
On Mon, 2012-04-09 at 10:55 +0530, Prabhakar Kushwaha wrote:
> - Fix NAND_CMD_READID command for ONFI detect.
>   - Add NAND_CMD_PARAM command to read the ONFI parameter page.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> Acked-by: Scott Wood <scottwood@freescale.com>
> ---
>  Based upon git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 
>  Branch master

Pushed to l2-mtd.git, thanks!
diff mbox

Patch

diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index c30ac7b..4e7f31e 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -375,21 +375,31 @@  static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 		return;
 
-	/* READID must read all 8 possible bytes */
 	case NAND_CMD_READID:
+	case NAND_CMD_PARAM: {
+		int timing = IFC_FIR_OP_RB;
+		if (command == NAND_CMD_PARAM)
+			timing = IFC_FIR_OP_RBCD;
+
 		out_be32(&ifc->ifc_nand.nand_fir0,
 				(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
 				(IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
-				(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+				(timing << IFC_NAND_FIR0_OP2_SHIFT));
 		out_be32(&ifc->ifc_nand.nand_fcr0,
-				NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
-		/* 8 bytes for manuf, device and exts */
-		out_be32(&ifc->ifc_nand.nand_fbcr, 8);
-		ifc_nand_ctrl->read_bytes = 8;
+				command << IFC_NAND_FCR0_CMD0_SHIFT);
+		out_be32(&ifc->ifc_nand.row3, column);
+
+		/*
+		 * although currently it's 8 bytes for READID, we always read
+		 * the maximum 256 bytes(for PARAM)
+		 */
+		out_be32(&ifc->ifc_nand.nand_fbcr, 256);
+		ifc_nand_ctrl->read_bytes = 256;
 
 		set_addr(mtd, 0, 0, 0);
 		fsl_ifc_run_command(mtd);
 		return;
+	}
 
 	/* ERASE1 stores the block and page address */
 	case NAND_CMD_ERASE1: