Message ID | 1334316061-26019-9-git-send-email-timo@exertus.fi |
---|---|
State | Changes Requested |
Delegated to: | Stefano Babic |
Headers | show |
On 04/13/2012 06:21 AM, Timo Ketola wrote: > There is already CONFIG_SYS_NAND_BASE (or CONFIG_SYS_NAND_BASE_LIST) which > must be defined for nand.c. Use that. nand.c sets IO_ADDR_R with that. > > Signed-off-by: Timo Ketola <timo@exertus.fi> > --- > drivers/mtd/nand/mxc_nand.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c > index 73813a2..fcee20d 100644 > --- a/drivers/mtd/nand/mxc_nand.c > +++ b/drivers/mtd/nand/mxc_nand.c > @@ -1361,7 +1361,7 @@ int board_nand_init(struct nand_chip *this) > this->read_buf = mxc_nand_read_buf; > this->verify_buf = mxc_nand_verify_buf; > > - host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; > + host->regs = this->IO_ADDR_R; > host->clk_act = 1; > > #ifdef CONFIG_MXC_NAND_HWECC Actually, I'd rather we go the other direction and deprecate CONFIG_SYS_NAND_BASE (see CONFIG_SYS_NAND_SELF_INIT). -Scott
On 13.04.2012 20:21, Scott Wood wrote: > On 04/13/2012 06:21 AM, Timo Ketola wrote: >> There is already CONFIG_SYS_NAND_BASE (or CONFIG_SYS_NAND_BASE_LIST) which >> must be defined for nand.c. Use that. nand.c sets IO_ADDR_R with that. >> ... > > Actually, I'd rather we go the other direction and deprecate > CONFIG_SYS_NAND_BASE (see CONFIG_SYS_NAND_SELF_INIT). Maybe it's better for me to drop this patch... -- Timo
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 73813a2..fcee20d 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1361,7 +1361,7 @@ int board_nand_init(struct nand_chip *this) this->read_buf = mxc_nand_read_buf; this->verify_buf = mxc_nand_verify_buf; - host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; + host->regs = this->IO_ADDR_R; host->clk_act = 1; #ifdef CONFIG_MXC_NAND_HWECC
There is already CONFIG_SYS_NAND_BASE (or CONFIG_SYS_NAND_BASE_LIST) which must be defined for nand.c. Use that. nand.c sets IO_ADDR_R with that. Signed-off-by: Timo Ketola <timo@exertus.fi> --- drivers/mtd/nand/mxc_nand.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)