diff mbox

[U-Boot,4/4] microblaze: Wire up LL_TEMAC driver initialization

Message ID 2aad2f7482826196e2f25e4ff0a4b08b21a764b6.1330161511.git.linz@li-pro.net
State Accepted
Commit 3ceecef14e2258157c846b3aaa26d7cdcd833b05
Delegated to: Joe Hershberger
Headers show

Commit Message

Stephan Linz Feb. 25, 2012, 10:48 a.m. UTC 
Initialize ll_temac driver.

Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Stephan Linz <linz@li-pro.net>
---
 .../xilinx/microblaze-generic/microblaze-generic.c |   36 ++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)

Comments

Joe Hershberger April 4, 2012, 4:15 p.m. UTC | #1 
Hi Stephan,

On Sat, Feb 25, 2012 at 4:48 AM, Stephan Linz <linz@li-pro.net> wrote:
> Initialize ll_temac driver.

Applied.

Thanks,
-Joe
diff mbox

Patch

diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index c4c13a6..a1e2bfe 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -90,5 +90,41 @@  int board_eth_init(bd_t *bis)
 	ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
 			txpp, rxpp);
 #endif
+
+#ifdef CONFIG_XILINX_LL_TEMAC
+# ifdef XILINX_LLTEMAC_BASEADDR
+#  ifdef XILINX_LLTEMAC_FIFO_BASEADDR
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR);
+#  elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR
+#   if XILINX_LLTEMAC_SDMA_USE_DCR == 1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_DCR,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
+#   else
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_PLB,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
+#   endif
+#  endif
+# endif
+# ifdef XILINX_LLTEMAC_BASEADDR1
+#  ifdef XILINX_LLTEMAC_FIFO_BASEADDR1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR1);
+#  elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1
+#   if XILINX_LLTEMAC_SDMA_USE_DCR == 1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_SDMA_DCR,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
+#   else
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_SDMA_PLB,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
+#   endif
+#  endif
+# endif
+#endif
+
 	return ret;
 }