@@ -257,6 +257,7 @@ S: Maintained
F: hw/xilinx_zynq.c
F: hw/zynq_slcr.c
F: hw/cadence_*
+F: hw/pl330.c
CRIS Machines
-------------
@@ -362,6 +362,7 @@ obj-arm-y += cadence_uart.o
obj-arm-y += cadence_ttc.o
obj-arm-y += cadence_gem.o
obj-arm-y += xilinx_zynq.o zynq_slcr.o
+obj-arm-y += pl330.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
obj-arm-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
new file mode 100644
@@ -0,0 +1,1395 @@
+/*
+ * ARM PrimeCell PL330 DMA Controller
+ *
+ * Copyright (c) 2009 Samsung Electronics.
+ * Contributed by Kirill Batuzov <batuzovk@ispras.ru>
+ */
+
+#include "sysbus.h"
+#include "qemu-timer.h"
+
+#ifdef PL330_ERR_DEBUG
+#define DB_PRINT(...) do { \
+ fprintf(stderr, ": %s: ", __func__); \
+ fprintf(stderr, ## __VA_ARGS__); \
+ } while (0);
+#else
+ #define DB_PRINT(...)
+#endif
+
+#define PL330_CHAN_NUM 8
+#define PL330_PERIPH_NUM 32
+#define PL330_MAX_BURST_LEN 128
+#define PL330_INSN_MAXSIZE 6
+
+#define PL330FIFO_OK 0
+#define PL330FIFO_STALL 1
+#define PL330FIFO_ERR (-1)
+
+#define PL330_FAULT_UNDEF_INSTR (1 << 0)
+#define PL330_FAULT_OPERAND_INVALID (1 << 1)
+#define PL330_FAULT_DMAGO_ER (1 << 4)
+#define PL330_FAULT_EVENT_ER (1 << 5)
+#define PL330_FAULT_CH_PERIPH_ER (1 << 6)
+#define PL330_FAULT_CH_RDWR_ER (1 << 7)
+#define PL330_FAULT_MFIFO_ER (1 << 12)
+#define PL330_FAULT_FIFOEMPTY_ER (1 << 13)
+#define PL330_FAULT_INSTR_FETCH_ER (1 << 16)
+#define PL330_FAULT_DATA_WRITE_ER (1 << 17)
+#define PL330_FAULT_DATA_READ_ER (1 << 18)
+#define PL330_FAULT_DBG_INSTR (1 << 30)
+#define PL330_FAULT_LOCKUP_ER (1 << 31)
+
+#define PL330_UNTAGGED 0xff
+
+#define PL330_SINGLE 0x0
+#define PL330_BURST 0x1
+
+#define PL330_WATCHDOG_LIMIT 1024
+
+/* IOMEM mapped registers */
+#define PL330_REG_DS 0x000
+#define PL330_REG_DPC 0x004
+#define PL330_REG_INTEN 0x020
+#define PL330_REG_ES 0x024
+#define PL330_REG_INTSTATUS 0x028
+#define PL330_REG_INTCLR 0x02C
+#define PL330_REG_FSM 0x030
+#define PL330_REG_FSC 0x034
+#define PL330_REG_FTM 0x038
+#define PL330_REG_FTC_BASE 0x040
+#define PL330_REG_CS_BASE 0x100
+#define PL330_REG_CPC_BASE 0x104
+#define PL330_REG_CHANCTRL 0x400
+#define PL330_REG_DBGSTATUS 0xD00
+#define PL330_REG_DBGCMD 0xD04
+#define PL330_REG_DBGINST0 0xD08
+#define PL330_REG_DBGINST1 0xD0C
+#define PL330_REG_CONFIG 0xE00
+#define PL330_REG_ID 0xFE0
+
+#define PL330_IOMEM_SIZE 0x1000
+
+static const uint32_t pl330_id[] = {
+ 0x30, 0x13, 0x04, 0x00, 0xB1, 0x05, 0xF0, 0x0D
+};
+
+/* DMA chanel states as they are described in PL330 Technical Reference Manual
+ * Most of them will not be used in emulation.
+ */
+typedef enum {
+ pl330_chan_stopped = 0,
+ pl330_chan_executing = 1,
+ pl330_chan_completing,
+ pl330_chan_waiting_periph,
+ pl330_chan_at_barrier,
+ pl330_chan_waiting_event = 4,
+ pl330_chan_updating_pc = 3,
+ pl330_chan_cache_miss,
+ pl330_chan_fault_completing,
+ pl330_chan_fault = 15,
+ pl330_chan_killing
+} PL330ChanState;
+
+typedef struct PL330 PL330;
+
+typedef struct PL330Chan {
+ target_phys_addr_t src;
+ target_phys_addr_t dst;
+ target_phys_addr_t pc;
+ uint32_t control;
+ uint32_t status;
+ uint32_t lc[2];
+ uint32_t fault_type;
+
+ uint8_t ns;
+ uint8_t is_manager;
+ uint8_t request_flag;
+ uint8_t wakeup;
+ uint8_t wfp_sbp;
+
+ PL330ChanState state;
+ uint8_t stall;
+
+ PL330 *parent;
+ uint8_t tag;
+ uint32_t watchdog_timer;
+} PL330Chan;
+
+typedef struct PL330Fifo {
+ uint8_t *buf;
+ uint8_t *tag;
+ int s, t;
+ int buf_size;
+} PL330Fifo;
+
+typedef struct PL330QueueEntry {
+ PL330Chan *c;
+ target_phys_addr_t addr;
+ int len;
+ int n;
+ int inc;
+ int z;
+ uint8_t tag;
+ uint8_t seqn;
+} PL330QueueEntry;
+
+typedef struct PL330Queue {
+ PL330QueueEntry *queue;
+ int queue_size;
+ uint8_t *lo_seqn;
+ uint8_t *hi_seqn;
+} PL330Queue;
+
+struct PL330 {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ PL330Chan manager;
+ PL330Chan *chan;
+ PL330Fifo fifo;
+ PL330Queue read_queue;
+ PL330Queue write_queue;
+
+ /* Config registers. cfg[5] = CfgDn. */
+ uint32_t inten;
+ uint32_t int_status;
+ uint32_t ev_status;
+ uint32_t cfg[6];
+ uint32_t dbg[2];
+ uint8_t debug_status;
+
+ qemu_irq irq_abort;
+ qemu_irq *irq;
+
+ uint8_t num_faulting;
+
+ int chan_num;
+ int periph_num;
+ unsigned int event_num;
+
+ QEMUTimer *timer; /* is used for restore dma. */
+ int8_t periph_busy[PL330_PERIPH_NUM];
+};
+
+typedef struct PL330InsnDesc {
+ /* OPCODE of the instruction */
+ uint8_t opcode;
+ /* Mask so we can select several sibling instructions, such as
+ DMALD, DMALDS and DMALDB */
+ uint8_t opmask;
+ /* Size of instruction in bytes */
+ uint8_t size;
+ /* Interpreter */
+ void (*exec)(PL330Chan *, uint8_t opcode, uint8_t *args, int len);
+} PL330InsnDesc;
+
+
+/* MFIFO Implementation
+ *
+ * MFIFO is implemented as a cyclic buffer of BUF_SIZE size. Tagged bytes are
+ * stored in this buffer. Data is stored in BUF field, tags - in the
+ * corresponding array elemnets of TAG field.
+ */
+
+/* Initialize queue. */
+static void PL330Fifo_init(PL330Fifo *s, uint32_t size)
+{
+ s->buf = g_malloc0(size * sizeof(uint8_t));
+ s->tag = g_malloc0(size * sizeof(uint8_t));
+ s->buf_size = size;
+}
+
+/* Cyclic increment */
+static inline int PL330Fifo_inc(int x, int size)
+{
+ return (x + 1) % size;
+}
+
+/* Number of empty bytes in MFIFO */
+static inline int PL330Fifo_num_free(PL330Fifo *s)
+{
+ if (s->t < s->s) {
+ return s->s - s->t;
+ } else {
+ return s->buf_size - s->t + s->s;
+ }
+}
+
+/* Number of bytes in MFIFO */
+static inline int PL330Fifo_num_used(PL330Fifo *s)
+{
+ if (s->t >= s->s) {
+ return s->t - s->s;
+ } else {
+ return s->buf_size - s->s + s->t;
+ }
+}
+
+/* Push LEN bytes of data stored in BUF to MFIFO and tag it with TAG.
+ * Zero returned on success, PL330FIFO_STALL if there is no enough free
+ * space in MFIFO to store requested amount of data. If push was unsaccessful
+ * no data is stored to MFIFO.
+ */
+static int PL330Fifo_push(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag)
+{
+ int i;
+ int old_s, old_t;
+
+ old_s = s->s;
+ old_t = s->t;
+ for (i = 0; i < len; i++) {
+ if (PL330Fifo_inc(s->t, s->buf_size) != s->s) {
+ s->buf[s->t] = buf[i];
+ s->tag[s->t] = tag;
+ s->t = PL330Fifo_inc(s->t, s->buf_size);
+ } else {
+ /* Rollback transaction */
+ s->s = old_s;
+ s->t = old_t;
+ return PL330FIFO_STALL;
+ }
+ }
+ return PL330FIFO_OK;
+}
+
+/* Get LEN bytes of data from MFIFO and store it to BUF. Tag value of each
+ * byte is veryfied. Zero returned on success, PL330FIFO_ERR on tag missmatch
+ * and PL330FIFO_STALL if there is no enough data in MFIFO. If get was
+ * unsaccessful no data is removed from MFIFO.
+ */
+static int PL330Fifo_get(PL330Fifo *s, uint8_t *buf, int len, uint8_t tag)
+{
+ int i, ret;
+ int old_s, old_t;
+
+ old_s = s->s;
+ old_t = s->t;
+ for (i = 0; i < len; i++) {
+ if (s->t != s->s && s->tag[s->s] == tag) {
+ buf[i] = s->buf[s->s];
+ s->s = PL330Fifo_inc(s->s, s->buf_size);
+ } else {
+ /* Rollback transaction */
+ ret = (s->t == s->s) ? ret = PL330FIFO_STALL : PL330FIFO_ERR;
+ s->s = old_s;
+ s->t = old_t;
+ return ret;
+ }
+ }
+ return PL330FIFO_OK;
+}
+
+/* Reset MFIFO. This completely erases all data in it. */
+static inline void PL330Fifo_reset(PL330Fifo *s)
+{
+ s->s = 0;
+ s->t = 0;
+}
+
+/* Return tag of the first byte stored in MFIFO. If MFIFO is empty
+ PL330_UNTAGGED is returned. */
+static inline uint8_t PL330Fifo_tag(PL330Fifo *s)
+{
+ return (s->t == s->s) ? PL330_UNTAGGED : s->tag[s->s];
+}
+
+/* Returns non-zero if tag TAG is present in fifo or zero otherwise */
+static int PL330Fifo_has_tag(PL330Fifo *s, uint8_t tag)
+{
+ int i;
+
+ for (i = s->s; i != s->t; i = PL330Fifo_inc(i, s->buf_size)) {
+ if (s->tag[i] == tag) {
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* Remove all entry tagged with TAG from MFIFO */
+static void PL330Fifo_tagged_remove(PL330Fifo *s, uint8_t tag)
+{
+ int i, t;
+
+ t = s->s;
+ for (i = s->s; i != s->t; i = PL330Fifo_inc(i, s->buf_size)) {
+ if (s->tag[i] != tag) {
+ s->buf[t] = s->buf[i];
+ s->tag[t] = s->tag[i];
+ t++;
+ }
+ }
+ s->t = t;
+}
+
+/* Read-Write Queue implementation
+ *
+ * A Read-Write Queue stores up to QUEUE_SIZE instructions (loads or stores).
+ * Each instructions is described by source (for loads) or destination (for
+ * stores) address ADDR, width of data to be loaded/stored LEN, number of
+ * stores/loads to be performed N, INC bit, Z bit and TAG to identify channel
+ * this instruction belongs to. Queue does not store any information about
+ * nature of the instruction: is it load or store. PL330 has different queues
+ * for loads and stores so this is already known at the top level where it
+ * matters.
+ *
+ * Queue works as FIFO for instructions with equivalent tags, but can issue
+ * instructions with different tags in arbitrary order. SEQN field attached to
+ * each instruction helps to achieve this. For each TAG queue contains
+ * instructions with consecutive SEQN values ranged from LO_SEQN[TAG] to
+ * HI_SEQN[TAG]-1 inclusive. SEQN is 8-bit unsigned integer, so SEQN=255 is
+ * followed by SEQN=0.
+ *
+ * Z bit indicates that zeroes should be stored. No MFIFO fetches are performed
+ * in this case.
+ */
+
+static void PL330Queue_reset(PL330Queue *s)
+{
+ int i;
+
+ for (i = 0; i < s->queue_size; i++) {
+ s->queue[i].tag = PL330_UNTAGGED;
+ }
+}
+
+/* Initialize queue */
+static void PL330Queue_init(PL330Queue *s, int size, int channum)
+{
+ s->queue = (PL330QueueEntry *)
+ g_malloc0(size * sizeof(PL330QueueEntry));
+ s->lo_seqn = (uint8_t *)g_malloc0(channum * sizeof(uint8_t));
+ s->hi_seqn = (uint8_t *)g_malloc0(channum * sizeof(uint8_t));
+ s->queue_size = size;
+}
+
+/* Returns pointer to an empty slot or NULL if queue is full */
+static PL330QueueEntry *PL330Queue_find_empty(PL330Queue *s)
+{
+ int i;
+
+ for (i = 0; i < s->queue_size; i++) {
+ if (s->queue[i].tag == PL330_UNTAGGED) {
+ return &s->queue[i];
+ }
+ }
+ return NULL;
+}
+
+/* Puts instruction to queue.
+ Return value:
+ - zero - OK
+ - non-zero - queue is full */
+static int pl330_insn_to_queue(PL330Queue *s, target_phys_addr_t addr,
+ int len, int n, int inc, int z, uint8_t tag,
+ PL330Chan *c)
+{
+ PL330QueueEntry *entry = PL330Queue_find_empty(s);
+
+ if (!entry) {
+ return 1;
+ }
+ entry->c = c;
+ entry->tag = tag;
+ entry->addr = addr;
+ entry->len = len;
+ entry->n = n;
+ entry->z = z;
+ entry->inc = inc;
+ entry->seqn = s->hi_seqn[tag];
+ s->hi_seqn[tag]++;
+ return 0;
+}
+
+/* Returns a pointer to queue slot containing instruction which satisfies
+ following conditions:
+ - it has valid tag value (not PL330_UNTAGGED)
+ - it can be issued without violating queue logic (see above)
+ - if TAG argument is not PL330_UNTAGGED this instruction has tag value
+ equivalent to the argument TAG value.
+ If such instruction cannot be found NULL is returned. */
+static PL330QueueEntry *PL330Queue_find_insn(PL330Queue *s, uint8_t tag)
+{
+ int i;
+
+ for (i = 0; i < s->queue_size; i++) {
+ if (s->queue[i].tag != PL330_UNTAGGED) {
+ if (s->queue[i].seqn == s->lo_seqn[s->queue[i].tag] && (
+ s->queue[i].tag == tag ||
+ tag == PL330_UNTAGGED ||
+ s->queue[i].z
+ )) {
+ return &s->queue[i];
+ }
+ }
+ }
+ return NULL;
+}
+
+/* Removes instruction from queue. */
+static inline void pl330_insn_from_queue(PL330Queue *s, PL330QueueEntry *e)
+{
+ s->lo_seqn[e->tag]++;
+ e->tag = PL330_UNTAGGED;
+}
+
+/* Removes all instructions tagged with TAG from queue. */
+static inline void pl330_tag_from_queue(PL330Queue *s, uint8_t tag)
+{
+ int i;
+
+ for (i = 0; i < s->queue_size; i++) {
+ if (s->queue[i].tag == tag) {
+ s->queue[i].tag = PL330_UNTAGGED;
+ }
+ }
+}
+
+
+/* DMA instruction execution engine */
+
+/* Moves DMA channel to the FAULT state and updates it's status. */
+static inline void pl330_fault(PL330Chan *ch, uint32_t flags)
+{
+ DB_PRINT("ch: %p, flags: %x\n", ch, flags);
+ ch->fault_type |= flags;
+ if (ch->state == pl330_chan_fault) {
+ return;
+ }
+ ch->state = pl330_chan_fault;
+ ch->parent->num_faulting++;
+ if (ch->parent->num_faulting == 1) {
+ DB_PRINT("abort interrupt raised\n");
+ qemu_irq_raise(ch->parent->irq_abort);
+ }
+}
+
+/*
+ * For information about instructions see PL330 Technical Reference Manual.
+ *
+ * Arguments:
+ * CH - chanel executing the instruction
+ * OPCODE - opcode
+ * ARGS - array of 8-bit arguments
+ * LEN - number of elements in ARGS array
+ */
+static void pl330_dmaaddh(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint16_t im = (((uint16_t)args[0]) << 8) | ((uint16_t)args[1]);
+ uint8_t ra = (opcode >> 1) & 1;
+
+ if (ra) {
+ ch->dst += im;
+ } else {
+ ch->src += im;
+ }
+}
+
+static void pl330_dmaend(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ if (ch->state == pl330_chan_executing && !ch->is_manager) {
+ /* Wait for all transfers to complete */
+ if (PL330Fifo_has_tag(&ch->parent->fifo, ch->tag) ||
+ PL330Queue_find_insn(&ch->parent->read_queue, ch->tag) != NULL ||
+ PL330Queue_find_insn(&ch->parent->write_queue, ch->tag) != NULL) {
+
+ ch->stall = 1;
+ return;
+ }
+ }
+ PL330Fifo_tagged_remove(&ch->parent->fifo, ch->tag);
+ pl330_tag_from_queue(&ch->parent->read_queue, ch->tag);
+ pl330_tag_from_queue(&ch->parent->write_queue, ch->tag);
+ ch->state = pl330_chan_stopped;
+}
+
+static void pl330_dmaflushp(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ uint8_t periph_id;
+
+ if (args[0] & 7) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ periph_id = (args[0] >> 3) & 0x1f;
+ if (periph_id >= ch->parent->periph_num) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (ch->ns > ((ch->parent->cfg[4] & (1 << periph_id)) >> periph_id)) {
+ pl330_fault(ch, PL330_FAULT_CH_PERIPH_ER);
+ return;
+ }
+ /* Do nothing */
+}
+
+static void pl330_dmago(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint8_t chan_id;
+ uint8_t ns;
+ uint32_t pc;
+ PL330Chan *s;
+
+ DB_PRINT("\n");
+
+ if (!ch->is_manager) {
+ /* TODO: what error actually is it? */
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ ns = (opcode >> 1) & 1;
+ chan_id = args[0] & 7;
+ if ((args[0] >> 3)) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (chan_id >= ch->parent->chan_num) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ pc = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) |
+ (((uint32_t)args[2]) << 8) | (((uint32_t)args[1]));
+ if (ch->parent->chan[chan_id].state != pl330_chan_stopped) {
+ /* TODO: what error actually is it? */
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (ch->ns > ns) {
+ pl330_fault(ch, PL330_FAULT_DMAGO_ER);
+ return;
+ }
+ s = &ch->parent->chan[chan_id];
+ s->ns = ns;
+ s->pc = pc;
+ s->state = pl330_chan_executing;
+}
+
+static void pl330_dmald(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint8_t bs = opcode & 3;
+ uint32_t size, num, inc;
+
+ if (bs == 2) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if ((bs == 1 && ch->request_flag == PL330_BURST) ||
+ (bs == 3 && ch->request_flag == PL330_SINGLE)) {
+ /* Perform NOP */
+ return;
+ }
+ num = ((ch->control >> 4) & 0xf) + 1;
+ size = (uint32_t)1 << ((ch->control >> 1) & 0x7);
+ inc = ch->control & 1;
+ ch->src &= ~(size - 1);
+ ch->stall = pl330_insn_to_queue(&ch->parent->read_queue, ch->src,
+ size, num, inc, 0, ch->tag, ch);
+ if (inc & !ch->stall) {
+ ch->src += size * num;
+ }
+}
+
+static void pl330_dmaldp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint8_t periph_id;
+
+ if (args[0] & 7) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ periph_id = (args[0] >> 3) & 0x1f;
+ if (periph_id >= ch->parent->periph_num) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (ch->ns > ((ch->parent->cfg[4] & (1 << periph_id)) >> periph_id)) {
+ pl330_fault(ch, PL330_FAULT_CH_PERIPH_ER);
+ return;
+ }
+ pl330_dmald(ch, opcode, args, len);
+}
+
+static void pl330_dmalp(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint8_t lc = (opcode & 2) >> 1;
+
+ ch->lc[lc] = args[0];
+}
+
+static void pl330_dmalpend(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ uint8_t nf = (opcode & 0x10) >> 4;
+ uint8_t bs = opcode & 3;
+ uint8_t lc = (opcode & 4) >> 2;
+
+ if (bs == 2) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if ((bs == 1 && ch->request_flag == PL330_BURST) ||
+ (bs == 3 && ch->request_flag == PL330_SINGLE)) {
+ /* Perform NOP */
+ return;
+ }
+ if (!nf || ch->lc[lc]) {
+ if (nf) {
+ ch->lc[lc]--;
+ }
+ ch->pc -= args[0];
+ ch->pc -= len + 1;
+ /* "ch->pc -= args[0] + len + 1" is incorrect when args[0] == 256 */
+ }
+}
+
+static void pl330_dmakill(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ if (ch->state == pl330_chan_fault ||
+ ch->state == pl330_chan_fault_completing) {
+ /* This is the only way for chanel from faulting state */
+ ch->fault_type = 0;
+ ch->parent->num_faulting--;
+ if (ch->parent->num_faulting == 0) {
+ DB_PRINT("abort interrupt lowered\n");
+ qemu_irq_lower(ch->parent->irq_abort);
+ }
+ }
+ ch->state = pl330_chan_killing;
+ PL330Fifo_tagged_remove(&ch->parent->fifo, ch->tag);
+ pl330_tag_from_queue(&ch->parent->read_queue, ch->tag);
+ pl330_tag_from_queue(&ch->parent->write_queue, ch->tag);
+ ch->state = pl330_chan_stopped;
+}
+
+static void pl330_dmamov(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint8_t rd = args[0] & 7;
+ uint32_t im;
+
+ if ((args[0] >> 3)) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ im = (((uint32_t)args[4]) << 24) | (((uint32_t)args[3]) << 16) |
+ (((uint32_t)args[2]) << 8) | (((uint32_t)args[1]));
+ switch (rd) {
+ case 0:
+ ch->src = im;
+ break;
+ case 1:
+ ch->control = im;
+ break;
+ case 2:
+ ch->dst = im;
+ break;
+ default:
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+}
+
+static void pl330_dmanop(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ /* NOP is NOP. */
+}
+
+static void pl330_dmarmb(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ /* Do nothing. Since we do not emulate AXI Bus transactions there is no
+ stalls. So we are allways on barrier. */
+}
+
+static void pl330_dmasev(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint8_t ev_id;
+
+ if (args[0] & 7) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ ev_id = (args[0] >> 3) & 0x1f;
+ if (ev_id >= ch->parent->event_num) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (ch->ns > ((ch->parent->cfg[3] & (1 << ev_id)) >> ev_id)) {
+ pl330_fault(ch, PL330_FAULT_EVENT_ER);
+ return;
+ }
+ if (ch->parent->inten & (1 << ev_id)) {
+ ch->parent->int_status |= (1 << ev_id);
+ DB_PRINT("event interrupt raised %d\n", ev_id);
+ qemu_irq_raise(ch->parent->irq[ev_id]);
+ } else {
+ ch->parent->ev_status |= (1 << ev_id);
+ }
+}
+
+static void pl330_dmast(PL330Chan *ch, uint8_t opcode, uint8_t *args, int len)
+{
+ uint8_t bs = opcode & 3;
+ uint32_t size, num, inc;
+
+ if (bs == 2) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if ((bs == 1 && ch->request_flag == PL330_BURST) ||
+ (bs == 3 && ch->request_flag == PL330_SINGLE)) {
+ /* Perform NOP */
+ return;
+ }
+ num = ((ch->control >> 18) & 0xf) + 1;
+ size = (uint32_t)1 << ((ch->control >> 15) & 0x7);
+ inc = (ch->control >> 14) & 1;
+ ch->dst &= ~(size - 1);
+ ch->stall = pl330_insn_to_queue(&ch->parent->write_queue, ch->dst,
+ size, num, inc, 0, ch->tag, ch);
+ if (inc) {
+ ch->dst += size * num;
+ }
+}
+
+static void pl330_dmastp(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ uint8_t periph_id;
+
+ if (args[0] & 7) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ periph_id = (args[0] >> 3) & 0x1f;
+ if (periph_id >= ch->parent->periph_num) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (ch->ns > ((ch->parent->cfg[4] & (1 << periph_id)) >> periph_id)) {
+ pl330_fault(ch, PL330_FAULT_CH_PERIPH_ER);
+ return;
+ }
+ pl330_dmast(ch, opcode, args, len);
+}
+
+static void pl330_dmastz(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ uint32_t size, num, inc;
+
+ num = ((ch->control >> 18) & 0xf) + 1;
+ size = (uint32_t)1 << ((ch->control >> 15) & 0x7);
+ inc = (ch->control >> 14) & 1;
+ ch->stall = pl330_insn_to_queue(&ch->parent->write_queue, ch->dst,
+ size, num, inc, 1, ch->tag, ch);
+ if (inc) {
+ ch->dst += size * num;
+ }
+}
+
+static void pl330_dmawfe(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ uint8_t ev_id;
+
+ if (args[0] & 5) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ ev_id = (args[0] >> 3) & 0x1f;
+ if (ev_id >= ch->parent->event_num) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (ch->ns > ((ch->parent->cfg[3] & (1 << ev_id)) >> ev_id)) {
+ pl330_fault(ch, PL330_FAULT_EVENT_ER);
+ return;
+ }
+ ch->wakeup = ev_id;
+}
+
+static void pl330_dmawfp(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ uint8_t bs = opcode & 3;
+ uint8_t periph_id;
+
+ if (args[0] & 7) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ periph_id = (args[0] >> 3) & 0x1f;
+ if (periph_id >= ch->parent->periph_num) {
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+ if (ch->ns > ((ch->parent->cfg[4] & (1 << periph_id)) >> periph_id)) {
+ pl330_fault(ch, PL330_FAULT_CH_PERIPH_ER);
+ return;
+ }
+ switch (bs) {
+ case 0: /* S */
+ ch->request_flag = PL330_SINGLE;
+ ch->wfp_sbp = 0;
+ break;
+ case 1: /* P */
+ ch->request_flag = PL330_BURST;
+ ch->wfp_sbp = 2;
+ break;
+ case 2: /* B */
+ ch->request_flag = PL330_BURST;
+ ch->wfp_sbp = 1;
+ break;
+ default:
+ pl330_fault(ch, PL330_FAULT_OPERAND_INVALID);
+ return;
+ }
+
+ if (ch->parent->periph_busy[periph_id]) {
+ ch->state = pl330_chan_waiting_periph;
+ } else if (ch->state == pl330_chan_waiting_periph) {
+ ch->state = pl330_chan_executing;
+ }
+}
+
+static void pl330_dmawmb(PL330Chan *ch, uint8_t opcode,
+ uint8_t *args, int len)
+{
+ /* Do nothing. Since we do not emulate AXI Bus transactions there is no
+ * stalls. So we are allways on barrier.
+ */
+}
+
+/* "NULL" terminated array of the instruction descriptions. */
+static const PL330InsnDesc insn_desc[] = {
+ { .opcode = 0x54, .opmask = 0xFD, .size = 3, .exec = pl330_dmaaddh, },
+ { .opcode = 0x00, .opmask = 0xFF, .size = 1, .exec = pl330_dmaend, },
+ { .opcode = 0x35, .opmask = 0xFF, .size = 2, .exec = pl330_dmaflushp, },
+ { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, },
+ { .opcode = 0x04, .opmask = 0xFC, .size = 1, .exec = pl330_dmald, },
+ { .opcode = 0x25, .opmask = 0xFD, .size = 2, .exec = pl330_dmaldp, },
+ { .opcode = 0x20, .opmask = 0xFD, .size = 2, .exec = pl330_dmalp, },
+ /* dmastp must be before dmalpend in this list, because their maps
+ * are overlapping
+ */
+ { .opcode = 0x29, .opmask = 0xFD, .size = 2, .exec = pl330_dmastp, },
+ { .opcode = 0x28, .opmask = 0xE8, .size = 2, .exec = pl330_dmalpend, },
+ { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, },
+ { .opcode = 0xBC, .opmask = 0xFF, .size = 6, .exec = pl330_dmamov, },
+ { .opcode = 0x18, .opmask = 0xFF, .size = 1, .exec = pl330_dmanop, },
+ { .opcode = 0x12, .opmask = 0xFF, .size = 1, .exec = pl330_dmarmb, },
+ { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, },
+ { .opcode = 0x08, .opmask = 0xFC, .size = 1, .exec = pl330_dmast, },
+ { .opcode = 0x0C, .opmask = 0xFF, .size = 1, .exec = pl330_dmastz, },
+ { .opcode = 0x36, .opmask = 0xFF, .size = 2, .exec = pl330_dmawfe, },
+ { .opcode = 0x30, .opmask = 0xFC, .size = 2, .exec = pl330_dmawfp, },
+ { .opcode = 0x13, .opmask = 0xFF, .size = 1, .exec = pl330_dmawmb, },
+ { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, }
+};
+
+/* Instructions which can be issued via debug registers. */
+static const PL330InsnDesc debug_insn_desc[] = {
+ { .opcode = 0xA0, .opmask = 0xFD, .size = 6, .exec = pl330_dmago, },
+ { .opcode = 0x01, .opmask = 0xFF, .size = 1, .exec = pl330_dmakill, },
+ { .opcode = 0x34, .opmask = 0xFF, .size = 2, .exec = pl330_dmasev, },
+ { .opcode = 0x00, .opmask = 0x00, .size = 0, .exec = NULL, }
+};
+
+static inline const PL330InsnDesc *pl330_fetch_insn(PL330Chan *ch)
+{
+ uint8_t opcode;
+ int i;
+
+ cpu_physical_memory_read(ch->pc, &opcode, 1);
+ for (i = 0; insn_desc[i].size; i++) {
+ if ((opcode & insn_desc[i].opmask) == insn_desc[i].opcode) {
+ return &insn_desc[i];
+ }
+ }
+ return NULL;
+}
+
+static inline void pl330_exec_insn(PL330Chan *ch, const PL330InsnDesc *insn)
+{
+ uint8_t buf[PL330_INSN_MAXSIZE];
+
+ cpu_physical_memory_read(ch->pc, buf, insn->size);
+ insn->exec(ch, buf[0], &buf[1], insn->size - 1);
+}
+
+static inline void pl330_update_pc(PL330Chan *ch,
+ const PL330InsnDesc *insn)
+{
+ ch->pc += insn->size;
+}
+
+/* Try to execute current instruction in channel CH. Number of executed
+ instructions is returned (0 or 1). */
+static int pl330_chan_exec(PL330Chan *ch)
+{
+ const PL330InsnDesc *insn;
+
+ if (ch->state != pl330_chan_executing &&
+ ch->state != pl330_chan_waiting_periph) {
+ DB_PRINT("%d\n", ch->state);
+ return 0;
+ }
+ ch->stall = 0;
+ insn = pl330_fetch_insn(ch);
+ if (!insn) {
+ DB_PRINT("pl330 undefined instruction\n");
+ pl330_fault(ch, PL330_FAULT_UNDEF_INSTR);
+ return 0;
+ }
+ pl330_exec_insn(ch, insn);
+ if (ch->state == pl330_chan_executing && !ch->stall) {
+ pl330_update_pc(ch, insn);
+ ch->watchdog_timer = 0;
+ return 1;
+ } else {
+ if (ch->stall) {
+ ch->watchdog_timer++;
+ if (ch->watchdog_timer >= PL330_WATCHDOG_LIMIT) {
+ pl330_fault(ch, PL330_FAULT_LOCKUP_ER);
+ }
+ }
+ }
+ return 0;
+}
+
+/* Try to execute 1 instruction in each channel, one instruction from read
+ queue and one instruction from write queue. Number of successfully executed
+ instructions is returned. */
+static int pl330_exec_cycle(PL330Chan *channel)
+{
+ PL330 *s = channel->parent;
+ PL330QueueEntry *q;
+ int i;
+ int num_exec = 0;
+ int fifo_res = 0;
+ uint8_t buf[PL330_MAX_BURST_LEN];
+
+ /* Execute one instruction in each channel */
+ num_exec += pl330_chan_exec(channel);
+
+ /* Execute one instruction from read queue */
+ q = PL330Queue_find_insn(&s->read_queue, PL330_UNTAGGED);
+ if (q != NULL && q->len <= PL330Fifo_num_free(&s->fifo)) {
+ cpu_physical_memory_read(q->addr, buf, q->len);
+ fifo_res = PL330Fifo_push(&s->fifo, buf, q->len, q->tag);
+ if (fifo_res == PL330FIFO_OK) {
+ if (q->inc) {
+ q->addr += q->len;
+ }
+ q->n--;
+ if (!q->n) {
+ pl330_insn_from_queue(&s->read_queue, q);
+ }
+ num_exec++;
+ }
+ }
+
+ /* Execute one instruction from write queue. */
+ q = PL330Queue_find_insn(&s->write_queue, PL330Fifo_tag(&s->fifo));
+ if (q != NULL) {
+ if (q->z) {
+ for (i = 0; i < q->len; i++) {
+ buf[i] = 0;
+ }
+ } else {
+ fifo_res = PL330Fifo_get(&s->fifo, buf, q->len, q->tag);
+ }
+ if (fifo_res == PL330FIFO_OK || q->z) {
+ cpu_physical_memory_write(q->addr, buf, q->len);
+ if (q->inc) {
+ q->addr += q->len;
+ }
+ num_exec++;
+ } else if (fifo_res == PL330FIFO_STALL) {
+ pl330_fault(q->c, PL330_FAULT_FIFOEMPTY_ER);
+ }
+ q->n--;
+ if (!q->n) {
+ pl330_insn_from_queue(&s->write_queue, q);
+ }
+ }
+
+ return num_exec;
+}
+
+static int pl330_exec_channel(PL330Chan *channel)
+{
+ int insr_exec = 0;
+
+ /* TODO: Is it all right to execute everything or should we do per-cycle
+ simulation? */
+ while (pl330_exec_cycle(channel)) {
+ insr_exec++;
+ }
+
+ /* Detect deadlock */
+ if (channel->state == pl330_chan_executing) {
+ pl330_fault(channel, PL330_FAULT_LOCKUP_ER);
+ }
+ /* Situation when one of the queues has deadlocked but all channels
+ has finished their programs should be impossible. */
+
+ return insr_exec;
+}
+
+
+static inline void pl330_exec(PL330 *s)
+{
+ DB_PRINT("\n");
+ int i, insr_exec;
+ do {
+ insr_exec = pl330_exec_channel(&s->manager);
+
+ for (i = 0; i < s->chan_num; i++) {
+ insr_exec += pl330_exec_channel(&s->chan[i]);
+ }
+ } while (insr_exec);
+}
+
+static void pl330_exec_cycle_timer(void *opaque)
+{
+ PL330 *s = (PL330 *)opaque;
+ pl330_exec(s);
+}
+
+/* Stop or restore dma operations */
+static void pl330_dma_stop_irq(void *opaque, int irq, int level)
+{
+ PL330 *s = (PL330 *)opaque;
+
+ if (s->periph_busy[irq] != level) {
+ s->periph_busy[irq] = level;
+ qemu_mod_timer(s->timer, qemu_get_clock_ns(vm_clock));
+ }
+}
+
+static void pl330_debug_exec(PL330 *s)
+{
+ uint8_t args[5];
+ uint8_t opcode;
+ uint8_t chan_id;
+ int i;
+ PL330Chan *ch;
+ const PL330InsnDesc *insn;
+
+ s->debug_status = 1;
+ chan_id = (s->dbg[0] >> 8) & 0x07;
+ opcode = (s->dbg[0] >> 16) & 0xff;
+ args[0] = (s->dbg[0] >> 24) & 0xff;
+ args[1] = (s->dbg[1] >> 0) & 0xff;
+ args[2] = (s->dbg[1] >> 8) & 0xff;
+ args[3] = (s->dbg[1] >> 16) & 0xff;
+ args[4] = (s->dbg[1] >> 24) & 0xff;
+ DB_PRINT("chan id: %d\n", chan_id);
+ if (s->dbg[0] & 1) {
+ ch = &s->chan[chan_id];
+ } else {
+ ch = &s->manager;
+ }
+ insn = NULL;
+ for (i = 0; debug_insn_desc[i].size; i++) {
+ if ((opcode & debug_insn_desc[i].opmask) == debug_insn_desc[i].opcode) {
+ insn = &debug_insn_desc[i];
+ }
+ }
+ if (!insn) {
+ pl330_fault(ch, PL330_FAULT_UNDEF_INSTR);
+ return ;
+ }
+ ch->stall = 0;
+ insn->exec(ch, opcode, args, insn->size - 1);
+ if (ch->stall) {
+ hw_error("pl330: stall of debug instruction not implemented\n");
+ }
+ s->debug_status = 0;
+}
+
+
+/* IOMEM mapped registers */
+
+static void pl330_iomem_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ PL330 *s = (PL330 *) opaque;
+ uint32_t i;
+
+ DB_PRINT("addr: %08x data: %08x\n", offset, (unsigned)value);
+
+ if (offset & 3) {
+ hw_error("pl330: bad write offset " TARGET_FMT_plx "\n", offset);
+ }
+ switch (offset) {
+ case PL330_REG_INTEN:
+ s->inten = value;
+ break;
+ case PL330_REG_INTCLR:
+ for (i = 0; i < s->event_num; i++) {
+ if (s->int_status & s->inten & value & (1 << i)) {
+ DB_PRINT("event interrupt lowered %d\n", i);
+ qemu_irq_lower(s->irq[i]);
+ }
+ }
+ s->int_status &= ~value;
+ break;
+ case PL330_REG_DBGCMD:
+ if ((value & 3) == 0) {
+ pl330_debug_exec(s);
+ pl330_exec(s);
+ } else {
+ hw_error("pl330: write of illegal value %u for offset "
+ TARGET_FMT_plx "\n", (unsigned)value, offset);
+ }
+ break;
+ case PL330_REG_DBGINST0:
+ DB_PRINT("s->dbg[0] = %08x\n", (unsigned)value);
+ s->dbg[0] = value;
+ break;
+ case PL330_REG_DBGINST1:
+ DB_PRINT("s->dbg[1] = %08x\n", (unsigned)value);
+ s->dbg[1] = value;
+ break;
+ default:
+ hw_error("pl330: bad write offset " TARGET_FMT_plx "\n", offset);
+ break;
+ }
+}
+
+static inline uint32_t pl330_iomem_read_imp(void *opaque,
+ target_phys_addr_t offset)
+{
+ PL330 *s = (PL330 *) opaque;
+ int chan_id;
+ int i;
+ uint32_t res;
+
+ if (offset & 3) {
+ hw_error("pl330: bad read offset " TARGET_FMT_plx "\n", offset);
+ }
+
+ if (offset >= PL330_REG_ID && offset < PL330_REG_ID + 32) {
+ return pl330_id[(offset - PL330_REG_ID) >> 2];
+ }
+ if (offset >= PL330_REG_CONFIG && offset < PL330_REG_CONFIG + 24) {
+ return s->cfg[(offset - PL330_REG_CONFIG) >> 2];
+ }
+ if (offset >= PL330_REG_CHANCTRL && offset < 0xD00) {
+ offset -= PL330_REG_CHANCTRL;
+ chan_id = offset >> 5;
+ if (chan_id >= s->chan_num) {
+ hw_error("pl330: bad read offset " TARGET_FMT_plx "\n", offset);
+ }
+ switch (offset & 0x1f) {
+ case 0x00:
+ return s->chan[chan_id].src;
+ case 0x04:
+ return s->chan[chan_id].dst;
+ case 0x08:
+ return s->chan[chan_id].control;
+ case 0x0C:
+ return s->chan[chan_id].lc[0];
+ case 0x10:
+ return s->chan[chan_id].lc[1];
+ default:
+ hw_error("pl330: bad read offset " TARGET_FMT_plx "\n", offset);
+ }
+ }
+ if (offset >= PL330_REG_CS_BASE && offset < 0x400) {
+ offset -= PL330_REG_CS_BASE;
+ chan_id = offset >> 3;
+ if (chan_id >= s->chan_num) {
+ hw_error("pl330: bad read offset " TARGET_FMT_plx "\n", offset);
+ }
+ switch ((offset >> 2) & 1) {
+ case 0x0:
+ return s->chan[chan_id].ns << 20) |
+ (s->chan[chan_id].wakeup << 4) |
+ (s->chan[chan_id].state & 0xf) |
+ (s->chan[chan_id].wfp_sbp << 13;
+ case 0x1:
+ return s->chan[chan_id].pc;
+ default:
+ hw_error("pl330: read error\n");
+ }
+ }
+ if (offset >= PL330_REG_FTC_BASE && offset < 0x100) {
+ offset -= PL330_REG_FTC_BASE;
+ chan_id = offset >> 2;
+ if (chan_id >= s->chan_num) {
+ hw_error("pl330: bad read offset " TARGET_FMT_plx "\n", offset);
+ }
+ return s->chan[chan_id].fault_type;
+ }
+ switch (offset) {
+ case PL330_REG_DS:
+ return (s->manager.ns << 8) | (s->manager.wakeup << 4) |
+ (s->manager.state & 0xf);
+ case PL330_REG_DPC:
+ return s->manager.pc;
+ case PL330_REG_INTEN:
+ return s->inten;
+ case PL330_REG_ES:
+ return s->ev_status;
+ case PL330_REG_INTSTATUS:
+ return s->int_status;
+ case PL330_REG_INTCLR:
+ /* Documentation says that we can't read this register
+ * but linux kernel does it */
+ return 0;
+ case PL330_REG_FSM:
+ return s->manager.fault_type ? 1 : 0;
+ case PL330_REG_FSC:
+ res = 0;
+ for (i = 0; i < s->chan_num; i++) {
+ if (s->chan[i].state == pl330_chan_fault ||
+ s->chan[i].state == pl330_chan_fault_completing) {
+ res |= 1 << i;
+ }
+ }
+ return res;
+ case PL330_REG_FTM:
+ return s->manager.fault_type;
+ case PL330_REG_DBGSTATUS:
+ return s->debug_status;
+ default:
+ hw_error("pl330: bad read offset " TARGET_FMT_plx "\n", offset);
+ }
+ return 0;
+}
+
+static uint64_t pl330_iomem_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ int ret = pl330_iomem_read_imp(opaque, offset);
+ DB_PRINT("addr: %08x data: %08x\n", offset, ret);
+ return ret;
+}
+
+static const MemoryRegionOps pl330_ops = {
+ .read = pl330_iomem_read,
+ .write = pl330_iomem_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+/* Controller logic and initialization */
+
+static void pl330_chan_reset(PL330Chan *ch)
+{
+ ch->src = 0;
+ ch->dst = 0;
+ ch->pc = 0;
+ ch->state = pl330_chan_stopped;
+ ch->watchdog_timer = 0;
+ ch->stall = 0;
+ ch->control = 0;
+ ch->status = 0;
+ ch->fault_type = 0;
+}
+
+static void pl330_reset(DeviceState *d)
+{
+ int i;
+ PL330 *s = FROM_SYSBUS(PL330, sysbus_from_qdev(d));
+
+ s->inten = 0;
+ s->int_status = 0;
+ s->ev_status = 0;
+ s->debug_status = 0;
+ s->num_faulting = 0;
+ PL330Fifo_reset(&s->fifo);
+ PL330Queue_reset(&s->read_queue);
+ PL330Queue_reset(&s->write_queue);
+
+ for (i = 0; i < s->chan_num; i++) {
+ pl330_chan_reset(&s->chan[i]);
+ }
+ for (i = 0; i < s->periph_num; i++) {
+ s->periph_busy[i] = 0;
+ }
+}
+
+static int pl330_init(SysBusDevice *dev)
+{
+ int i;
+ PL330 *s = FROM_SYSBUS(PL330, dev);
+
+ sysbus_init_irq(dev, &s->irq_abort);
+ memory_region_init_io(&s->iomem, &pl330_ops, s, "dma", PL330_IOMEM_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ s->timer = qemu_new_timer_ns(vm_clock, pl330_exec_cycle_timer, s);
+
+ s->chan_num = ((s->cfg[0] >> 4) & 7) + 1;
+ s->chan = g_malloc0(sizeof(PL330Chan) * s->chan_num);
+ DB_PRINT("manager@%p\n", &s->manager);
+ for (i = 0; i < s->chan_num; i++) {
+ DB_PRINT("channel %d@%p\n", i, &s->chan[i]);
+ s->chan[i].parent = s;
+ s->chan[i].tag = (uint8_t)i;
+ }
+ s->manager.parent = s;
+ s->manager.tag = s->chan_num;
+ s->manager.ns = (s->cfg[0] >> 2) & 1;
+ s->manager.is_manager = 1;
+ if (s->cfg[0] & 1) {
+ s->periph_num = ((s->cfg[0] >> 12) & 0x1f) + 1;
+ } else {
+ s->periph_num = 0;
+ }
+ s->event_num = ((s->cfg[0] >> 17) & 0x1f) + 1;
+
+ s->irq = g_malloc0(sizeof(qemu_irq) * s->event_num);
+ for (i = 0; i < s->event_num; i++) {
+ sysbus_init_irq(dev, &s->irq[i]);
+ }
+
+ qdev_init_gpio_in(&dev->qdev, pl330_dma_stop_irq, PL330_PERIPH_NUM);
+
+ PL330Queue_init(&s->read_queue, ((s->cfg[5] >> 16) & 0xf) + 1, s->chan_num);
+ PL330Queue_init(&s->write_queue, ((s->cfg[5] >> 8) & 0xf) + 1, s->chan_num);
+ PL330Fifo_init(&s->fifo, ((s->cfg[5] >> 20) & 0x1ff) + 1);
+ pl330_reset(&s->busdev.qdev);
+
+ return 0;
+}
+
+static Property pl330_properties[] = {
+ DEFINE_PROP_UINT32("cfg0", PL330, cfg[0], 0),
+ DEFINE_PROP_UINT32("cfg1", PL330, cfg[1], 0),
+ DEFINE_PROP_UINT32("cfg2", PL330, cfg[2], 0),
+ DEFINE_PROP_UINT32("cfg3", PL330, cfg[3], 0),
+ DEFINE_PROP_UINT32("cfg4", PL330, cfg[4], 0),
+ DEFINE_PROP_UINT32("cfg5", PL330, cfg[5], 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void pl330_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = pl330_init;
+ dc->reset = pl330_reset;
+ dc->props = pl330_properties;
+}
+
+static TypeInfo pl330_info = {
+ .name = "pl330",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(PL330),
+ .class_init = pl330_class_init,
+};
+
+static void pl330_register_types(void)
+{
+ type_register_static(&pl330_info);
+}
+
+type_init(pl330_register_types)
Device model for Primecell PL330 dma controller. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> --- MAINTAINERS | 1 + Makefile.target | 1 + hw/pl330.c | 1395 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1397 insertions(+), 0 deletions(-) create mode 100644 hw/pl330.c