Message ID | 1332513070-5400-1-git-send-email-b29396@freescale.com |
---|---|
State | New |
Headers | show |
Dear Dong Aisheng, > From: Dong Aisheng <dong.aisheng@linaro.org> > > This patch includes basic dt support which can boot via nfs rootfs. > > Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> > --- > ChangeLog v1->v2: > * Some fixes addressed Rob's review comments. > Remove using of OF_DEV_AUXDATA. > * Remove mac address from dts file > Currently we use the mac address got from uboot to work. > Will submit a p separate atch using prom_update_property to fix this > issue for driver based on suggestions from Grant and Lothar. > * rename mxs-dt.c to mach-mxs.c which is supposed to support mx23 dt > too in the future. > * add compatible string "fsl,imx28" per Sascha's suggestion > * add more devices in dtsi file > For those devices still not in use, set the state to "disabled" > by default. > > For other patches i sent with this in the first series like mmc and sdma > dt support, i will send out them separately since this patch does not > depend on them and does not block you to run dt via nfs rootfs. > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > arch/arm/boot/dts/imx28-evk.dts | 35 +++ Isn't this supposed to be "mx28evk.dts"? > arch/arm/boot/dts/imx28.dtsi | 358 > +++++++++++++++++++++++++ arch/arm/mach-mxs/Kconfig | > 8 + > arch/arm/mach-mxs/Makefile | 1 + > arch/arm/mach-mxs/clock-mx28.c | 4 + > arch/arm/mach-mxs/mach-mxs.c | 69 +++++ > 7 files changed, 479 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boot/dts/imx28-evk.dts > create mode 100644 arch/arm/boot/dts/imx28.dtsi > create mode 100644 arch/arm/mach-mxs/mach-mxs.c > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt > b/Documentation/devicetree/bindings/arm/fsl.txt index 54bddda..9f21faf > 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.txt > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > @@ -1,6 +1,10 @@ > Freescale i.MX Platforms Device Tree Bindings > ----------------------------------------------- > > +i.MX28 Evaluation Kit > +Required root node properties: > + - compatible = "fsl,imx28-evk", "fsl,imx28"; > + > i.MX51 Babbage Board > Required root node properties: > - compatible = "fsl,imx51-babbage", "fsl,imx51"; > diff --git a/arch/arm/boot/dts/imx28-evk.dts > b/arch/arm/boot/dts/imx28-evk.dts new file mode 100644 > index 0000000..5402495 > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-evk.dts > @@ -0,0 +1,35 @@ > +/* > + * Copyright 2012 Freescale Semiconductor, Inc. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +/include/ "imx28.dtsi" > + > +/ { > + model = "Freescale i.MX28 Evaluation Kit"; > + compatible = "fsl,imx28-evk", "fsl,imx28"; > + > + memory { > + device_type = "memory"; > + reg = <0x40000000 0x08000000>; > + }; > + > + ahb@80080000 { > + ethernet@800f0000 { fec@... would be more readable, but I think this was decided before to be like this? > + phy-mode = "rmii"; > + status = "okay"; > + }; > + [...] > diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile > index 908bf9a..8328c45 100644 > --- a/arch/arm/mach-mxs/Makefile > +++ b/arch/arm/mach-mxs/Makefile > @@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o > obj-$(CONFIG_SOC_IMX23) += clock-mx23.o > obj-$(CONFIG_SOC_IMX28) += clock-mx28.o > > +obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o > obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o > obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o > obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o > diff --git a/arch/arm/mach-mxs/clock-mx28.c > b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..88ed30c 100644 > --- a/arch/arm/mach-mxs/clock-mx28.c > +++ b/arch/arm/mach-mxs/clock-mx28.c > @@ -671,6 +671,10 @@ static struct clk_lookup lookups[] = { > _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) > _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk) > _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk) > + /* for DT */ > + _REGISTER_CLOCK("80074000.serial", NULL, uart_clk) > + _REGISTER_CLOCK("800f0000.ethernet", NULL, fec_clk) > + _REGISTER_CLOCK("800f4000.ethernet", NULL, fec_clk) Wasn't the DT stuff supposed to be more symbolic? Aka. this seems weird. > }; > > static int clk_misc_init(void) Best regards,
Hi Marek, On Fri, Mar 23, 2012 at 10:43 PM, Marek Vasut <marek.vasut@gmail.com> wrote: > Dear Dong Aisheng, > >> From: Dong Aisheng <dong.aisheng@linaro.org> >> >> This patch includes basic dt support which can boot via nfs rootfs. >> >> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> >> --- >> ChangeLog v1->v2: >> * Some fixes addressed Rob's review comments. >> Remove using of OF_DEV_AUXDATA. >> * Remove mac address from dts file >> Currently we use the mac address got from uboot to work. >> Will submit a p separate atch using prom_update_property to fix this >> issue for driver based on suggestions from Grant and Lothar. >> * rename mxs-dt.c to mach-mxs.c which is supposed to support mx23 dt >> too in the future. >> * add compatible string "fsl,imx28" per Sascha's suggestion >> * add more devices in dtsi file >> For those devices still not in use, set the state to "disabled" >> by default. >> >> For other patches i sent with this in the first series like mmc and sdma >> dt support, i will send out them separately since this patch does not >> depend on them and does not block you to run dt via nfs rootfs. >> --- >> Documentation/devicetree/bindings/arm/fsl.txt | 4 + >> arch/arm/boot/dts/imx28-evk.dts | 35 +++ > > Isn't this supposed to be "mx28evk.dts"? > I just keep consistent with other existing imx dts file like imx6q-arm2.dts. >> arch/arm/boot/dts/imx28.dtsi | 358 >> +++++++++++++++++++++++++ arch/arm/mach-mxs/Kconfig | >> 8 + >> arch/arm/mach-mxs/Makefile | 1 + >> arch/arm/mach-mxs/clock-mx28.c | 4 + >> arch/arm/mach-mxs/mach-mxs.c | 69 +++++ >> 7 files changed, 479 insertions(+), 0 deletions(-) >> create mode 100644 arch/arm/boot/dts/imx28-evk.dts >> create mode 100644 arch/arm/boot/dts/imx28.dtsi >> create mode 100644 arch/arm/mach-mxs/mach-mxs.c >> >> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt >> b/Documentation/devicetree/bindings/arm/fsl.txt index 54bddda..9f21faf >> 100644 >> --- a/Documentation/devicetree/bindings/arm/fsl.txt >> +++ b/Documentation/devicetree/bindings/arm/fsl.txt >> @@ -1,6 +1,10 @@ >> Freescale i.MX Platforms Device Tree Bindings >> ----------------------------------------------- >> >> +i.MX28 Evaluation Kit >> +Required root node properties: >> + - compatible = "fsl,imx28-evk", "fsl,imx28"; >> + >> i.MX51 Babbage Board >> Required root node properties: >> - compatible = "fsl,imx51-babbage", "fsl,imx51"; >> diff --git a/arch/arm/boot/dts/imx28-evk.dts >> b/arch/arm/boot/dts/imx28-evk.dts new file mode 100644 >> index 0000000..5402495 >> --- /dev/null >> +++ b/arch/arm/boot/dts/imx28-evk.dts >> @@ -0,0 +1,35 @@ >> +/* >> + * Copyright 2012 Freescale Semiconductor, Inc. >> + * >> + * The code contained herein is licensed under the GNU General Public >> + * License. You may obtain a copy of the GNU General Public License >> + * Version 2 or later at the following locations: >> + * >> + * http://www.opensource.org/licenses/gpl-license.html >> + * http://www.gnu.org/copyleft/gpl.html >> + */ >> + >> +/dts-v1/; >> +/include/ "imx28.dtsi" >> + >> +/ { >> + model = "Freescale i.MX28 Evaluation Kit"; >> + compatible = "fsl,imx28-evk", "fsl,imx28"; >> + >> + memory { >> + device_type = "memory"; >> + reg = <0x40000000 0x08000000>; >> + }; >> + >> + ahb@80080000 { >> + ethernet@800f0000 { > > fec@... would be more readable, but I think this was decided before to be like > this? > Yes. >> + phy-mode = "rmii"; >> + status = "okay"; >> + }; >> + > > [...] > >> diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile >> index 908bf9a..8328c45 100644 >> --- a/arch/arm/mach-mxs/Makefile >> +++ b/arch/arm/mach-mxs/Makefile >> @@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o >> obj-$(CONFIG_SOC_IMX23) += clock-mx23.o >> obj-$(CONFIG_SOC_IMX28) += clock-mx28.o >> >> +obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o >> obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o >> obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o >> obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o >> diff --git a/arch/arm/mach-mxs/clock-mx28.c >> b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..88ed30c 100644 >> --- a/arch/arm/mach-mxs/clock-mx28.c >> +++ b/arch/arm/mach-mxs/clock-mx28.c >> @@ -671,6 +671,10 @@ static struct clk_lookup lookups[] = { >> _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) >> _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk) >> _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk) >> + /* for DT */ >> + _REGISTER_CLOCK("80074000.serial", NULL, uart_clk) >> + _REGISTER_CLOCK("800f0000.ethernet", NULL, fec_clk) >> + _REGISTER_CLOCK("800f4000.ethernet", NULL, fec_clk) > > Wasn't the DT stuff supposed to be more symbolic? Aka. this seems weird. > Sorry, i'm not quite understand. What's your suggestion to change? Regards Dong Aisheng
On Fri, 23 Mar 2012 15:43:54 +0100, Marek Vasut <marek.vasut@gmail.com> wrote: > Dear Dong Aisheng, > > > From: Dong Aisheng <dong.aisheng@linaro.org> > > > > This patch includes basic dt support which can boot via nfs rootfs. > > > > Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> > > --- > > ChangeLog v1->v2: > > * Some fixes addressed Rob's review comments. > > Remove using of OF_DEV_AUXDATA. > > * Remove mac address from dts file > > Currently we use the mac address got from uboot to work. > > Will submit a p separate atch using prom_update_property to fix this > > issue for driver based on suggestions from Grant and Lothar. > > * rename mxs-dt.c to mach-mxs.c which is supposed to support mx23 dt > > too in the future. > > * add compatible string "fsl,imx28" per Sascha's suggestion > > * add more devices in dtsi file > > For those devices still not in use, set the state to "disabled" > > by default. > > > > For other patches i sent with this in the first series like mmc and sdma > > dt support, i will send out them separately since this patch does not > > depend on them and does not block you to run dt via nfs rootfs. > > --- > > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > > arch/arm/boot/dts/imx28-evk.dts | 35 +++ > > Isn't this supposed to be "mx28evk.dts"? > > > arch/arm/boot/dts/imx28.dtsi | 358 > > +++++++++++++++++++++++++ arch/arm/mach-mxs/Kconfig | > > 8 + > > arch/arm/mach-mxs/Makefile | 1 + > > arch/arm/mach-mxs/clock-mx28.c | 4 + > > arch/arm/mach-mxs/mach-mxs.c | 69 +++++ > > 7 files changed, 479 insertions(+), 0 deletions(-) > > create mode 100644 arch/arm/boot/dts/imx28-evk.dts > > create mode 100644 arch/arm/boot/dts/imx28.dtsi > > create mode 100644 arch/arm/mach-mxs/mach-mxs.c > > > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt > > b/Documentation/devicetree/bindings/arm/fsl.txt index 54bddda..9f21faf > > 100644 > > --- a/Documentation/devicetree/bindings/arm/fsl.txt > > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > > @@ -1,6 +1,10 @@ > > Freescale i.MX Platforms Device Tree Bindings > > ----------------------------------------------- > > > > +i.MX28 Evaluation Kit > > +Required root node properties: > > + - compatible = "fsl,imx28-evk", "fsl,imx28"; > > + > > i.MX51 Babbage Board > > Required root node properties: > > - compatible = "fsl,imx51-babbage", "fsl,imx51"; > > diff --git a/arch/arm/boot/dts/imx28-evk.dts > > b/arch/arm/boot/dts/imx28-evk.dts new file mode 100644 > > index 0000000..5402495 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx28-evk.dts > > @@ -0,0 +1,35 @@ > > +/* > > + * Copyright 2012 Freescale Semiconductor, Inc. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +/dts-v1/; > > +/include/ "imx28.dtsi" > > + > > +/ { > > + model = "Freescale i.MX28 Evaluation Kit"; > > + compatible = "fsl,imx28-evk", "fsl,imx28"; > > + > > + memory { > > + device_type = "memory"; > > + reg = <0x40000000 0x08000000>; > > + }; > > + > > + ahb@80080000 { > > + ethernet@800f0000 { > > fec@... would be more readable, but I think this was decided before to be like > this? ethernet@... is the correct naming. > > > + phy-mode = "rmii"; > > + status = "okay"; > > + }; > > + > > [...] > > > diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile > > index 908bf9a..8328c45 100644 > > --- a/arch/arm/mach-mxs/Makefile > > +++ b/arch/arm/mach-mxs/Makefile > > @@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o > > obj-$(CONFIG_SOC_IMX23) += clock-mx23.o > > obj-$(CONFIG_SOC_IMX28) += clock-mx28.o > > > > +obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o > > obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o > > obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o > > obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o > > diff --git a/arch/arm/mach-mxs/clock-mx28.c > > b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..88ed30c 100644 > > --- a/arch/arm/mach-mxs/clock-mx28.c > > +++ b/arch/arm/mach-mxs/clock-mx28.c > > @@ -671,6 +671,10 @@ static struct clk_lookup lookups[] = { > > _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) > > _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk) > > _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk) > > + /* for DT */ > > + _REGISTER_CLOCK("80074000.serial", NULL, uart_clk) > > + _REGISTER_CLOCK("800f0000.ethernet", NULL, fec_clk) > > + _REGISTER_CLOCK("800f4000.ethernet", NULL, fec_clk) > > Wasn't the DT stuff supposed to be more symbolic? Aka. this seems weird. Indeed. It is a symptom of the common clock and DT clock bindings not being merged yet. Expect this to be able to be removed in a couple of kernel releases. g.
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 54bddda..9f21faf 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -1,6 +1,10 @@ Freescale i.MX Platforms Device Tree Bindings ----------------------------------------------- +i.MX28 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx28-evk", "fsl,imx28"; + i.MX51 Babbage Board Required root node properties: - compatible = "fsl,imx51-babbage", "fsl,imx51"; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts new file mode 100644 index 0000000..5402495 --- /dev/null +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -0,0 +1,35 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Freescale i.MX28 Evaluation Kit"; + compatible = "fsl,imx28-evk", "fsl,imx28"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x08000000>; + }; + + ahb@80080000 { + ethernet@800f0000 { + phy-mode = "rmii"; + status = "okay"; + }; + + ethernet@800f4000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi new file mode 100644 index 0000000..9152354 --- /dev/null +++ b/arch/arm/boot/dts/imx28.dtsi @@ -0,0 +1,358 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&icoll>; + + aliases { + serial0 = &duart; + }; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + apb@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x80000>; + ranges; + + apbh@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x3c900>; + ranges; + + icoll: interrupt-controller@80000000 { + compatible = "fsl,imx28-icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80000000 0x2000>; + }; + + hsadc@80002000 { + reg = <0x80002000 2000>; + interrupts = <13 87>; + status = "disabled"; + }; + + dma-apbh@80004000 { + reg = <0x80004000 2000>; + status = "disabled"; + }; + + perfmon@80006000 { + reg = <0x80006000 800>; + interrupts = <27>; + status = "disabled"; + }; + + bch@8000a000 { + reg = <0x8000a000 2000>; + interrupts = <41>; + status = "disabled"; + }; + + gpmi@8000c000 { + reg = <0x8000c000 2000>; + interrupts = <42 88>; + status = "disabled"; + }; + + ssp@80010000 { + reg = <0x80010000 2000>; + interrupts = <96 82>; + status = "disabled"; + }; + + ssp@80012000 { + reg = <0x80012000 2000>; + interrupts = <97 83>; + status = "disabled"; + }; + + ssp@80014000 { + reg = <0x80014000 2000>; + interrupts = <98 84>; + status = "disabled"; + }; + + ssp@80016000 { + reg = <0x80016000 2000>; + interrupts = <99 85>; + status = "disabled"; + }; + + pinctrl@80018000 { + reg = <0x80018000 2000>; + status = "disabled"; + }; + + digctl@8001c000 { + reg = <0x8001c000 2000>; + interrupts = <89>; + status = "disabled"; + }; + + etm@80022000 { + reg = <0x80022000 2000>; + status = "disabled"; + }; + + dma-apbx@80024000 { + reg = <0x80024000 2000>; + status = "disabled"; + }; + + dcp@80028000 { + reg = <0x80028000 2000>; + interrupts = <52 53 54>; + status = "disabled"; + }; + + pxp@8002a000 { + reg = <0x8002a000 2000>; + interrupts = <39>; + status = "disabled"; + }; + + ocotp@8002c000 { + reg = <0x8002c000 2000>; + status = "disabled"; + }; + + axi-ahb@8002e000 { + reg = <0x8002e000 2000>; + status = "disabled"; + }; + + lcdif@80030000 { + reg = <0x80030000 2000>; + interrupts = <38 86>; + status = "disabled"; + }; + + can@80032000 { + reg = <0x80032000 2000>; + interrupts = <8>; + status = "disabled"; + }; + + can@80034000 { + reg = <0x80034000 2000>; + interrupts = <9>; + status = "disabled"; + }; + + simdbg@8003c000 { + reg = <0x8003c000 200>; + status = "disabled"; + }; + + simgpmisel@8003c200 { + reg = <0x8003c200 100>; + status = "disabled"; + }; + + simsspsel@8003c300 { + reg = <0x8003c300 100>; + status = "disabled"; + }; + + simmemsel@8003c400 { + reg = <0x8003c400 100>; + status = "disabled"; + }; + + gpiomon@8003c500 { + reg = <0x8003c500 100>; + status = "disabled"; + }; + + simenet@8003c700 { + reg = <0x8003c700 100>; + status = "disabled"; + }; + + armjtag@8003c800 { + reg = <0x8003c800 100>; + status = "disabled"; + }; + }; + + apbx@80040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80040000 0x40000>; + ranges; + + clkctl@80040000 { + reg = <0x80040000 2000>; + status = "disabled"; + }; + + saif@80042000 { + reg = <0x80042000 2000>; + interrupts = <59 80>; + status = "disabled"; + }; + + power@80044000 { + reg = <0x80044000 2000>; + status = "disabled"; + }; + + saif@80046000 { + reg = <0x80046000 2000>; + interrupts = <58 81>; + status = "disabled"; + }; + + lradc@80050000 { + reg = <0x80050000 2000>; + status = "disabled"; + }; + + spdif@80054000 { + reg = <0x80054000 2000>; + interrupts = <45 66>; + status = "disabled"; + }; + + rtc@80056000 { + reg = <0x80056000 2000>; + interrupts = <28 29>; + status = "disabled"; + }; + + i2c@80058000 { + reg = <0x80058000 2000>; + interrupts = <111 68>; + status = "disabled"; + }; + + i2c@8005a000 { + reg = <0x8005a000 2000>; + interrupts = <110 69>; + status = "disabled"; + }; + + pwm@80064000 { + reg = <0x80064000 2000>; + status = "disabled"; + }; + + timrot@80068000 { + reg = <0x80068000 2000>; + status = "disabled"; + }; + + serial@8006a000 { + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + status = "disabled"; + }; + + serial@8006c000 { + reg = <0x8006c000 0x2000>; + interrupts = <113 72 73>; + status = "disabled"; + }; + + serial@8006e000 { + reg = <0x8006e000 0x2000>; + interrupts = <114 74 75>; + status = "disabled"; + }; + + serial@80070000 { + reg = <0x80070000 0x2000>; + interrupts = <115 76 77>; + status = "disabled"; + }; + + serial@80072000 { + reg = <0x80072000 0x2000>; + interrupts = <116 78 79>; + status = "disabled"; + }; + + duart: serial@80074000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80074000 0x1000>; + interrupts = <47>; + }; + + usbphy@8007c000 { + reg = <0x8007c000 0x2000>; + status = "disabled"; + }; + + usbphy@8007e000 { + reg = <0x8007e000 0x2000>; + status = "disabled"; + }; + }; + }; + + ahb@80080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80080000 0x80000>; + ranges; + + usbctrl@80080000 { + reg = <0x80080000 0x10000>; + status = "disabled"; + }; + + usbctrl@80090000 { + reg = <0x80090000 0x10000>; + status = "disabled"; + }; + + dflpt@800c0000 { + reg = <0x800c0000 0x10000>; + status = "disabled"; + }; + + ethernet@800f0000 { + compatible = "fsl,imx28-fec"; + reg = <0x800f0000 0x4000>; + interrupts = <101>; + status = "disabled"; + }; + + ethernet@800f4000 { + compatible = "fsl,imx28-fec"; + reg = <0x800f4000 0x4000>; + interrupts = <102>; + status = "disabled"; + }; + + switch@800f8000 { + reg = <0x800f8000 0x8000>; + status = "disabled"; + }; + + }; +}; diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index c57f996..c776aef 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -17,6 +17,14 @@ config SOC_IMX28 comment "MXS platforms:" +config MACH_MXS_DT + bool "Support MXS platforms from device tree" + select SOC_IMX28 + select USE_OF + help + Include support for Freescale MXS platforms(i.MX23 and i.MX28) + using the device tree for discovery + config MACH_STMP378X_DEVB bool "Support STMP378x_devb Platform" select SOC_IMX23 diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 908bf9a..8328c45 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_SOC_IMX23) += clock-mx23.o obj-$(CONFIG_SOC_IMX28) += clock-mx28.o +obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..88ed30c 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -671,6 +671,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk) _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk) + /* for DT */ + _REGISTER_CLOCK("80074000.serial", NULL, uart_clk) + _REGISTER_CLOCK("800f0000.ethernet", NULL, fec_clk) + _REGISTER_CLOCK("800f4000.ethernet", NULL, fec_clk) }; static int clk_misc_init(void) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c new file mode 100644 index 0000000..6d1e331 --- /dev/null +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -0,0 +1,69 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mx28.h> + +static int __init imx28_icoll_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + irq_domain_add_simple(np, 0); + + return 0; +} + +static const struct of_device_id mxs_irq_match[] __initconst = { + { .compatible = "fsl,imx28-icoll", .data = imx28_icoll_add_irq_domain, }, + { /* sentinel */ } +}; + +static void __init mxs_dt_init_irq(void) +{ + icoll_init_irq(); + of_irq_init(mxs_irq_match); +} + +static void __init imx28_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer imx28_timer = { + .init = imx28_timer_init, +}; + +static void __init imx28_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); +} + +static const char *imx28_dt_compat[] __initdata = { + "fsl,imx28", + "fsl,imx28-evk", + NULL, +}; + +DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") + .map_io = mx28_map_io, + .init_irq = mxs_dt_init_irq, + .timer = &imx28_timer, + .init_machine = imx28_machine_init, + .dt_compat = imx28_dt_compat, + .restart = mxs_restart, +MACHINE_END