Message ID | 1330610560-15978-2-git-send-email-fabio.estevam@freescale.com |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
> No need to define CONFIG_ARCH_CPU_INIT. > > All mx6 based boards should use arch_cpu_init(). > Acked-by: Marek Vasut <marex@denx.de> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > arch/arm/cpu/armv7/mx6/soc.c | 2 -- > include/configs/mx6qarm2.h | 1 - > include/configs/mx6qsabrelite.h | 1 - > 3 files changed, 0 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c > index 2ac74b5..2d07099 100644 > --- a/arch/arm/cpu/armv7/mx6/soc.c > +++ b/arch/arm/cpu/armv7/mx6/soc.c > @@ -37,7 +37,6 @@ u32 get_cpu_rev(void) > return system_rev; > } > > -#ifdef CONFIG_ARCH_CPU_INIT > void init_aips(void) > { > struct aipstz_regs *aips1, *aips2; > @@ -77,7 +76,6 @@ int arch_cpu_init(void) > > return 0; > } > -#endif > > #if defined(CONFIG_FEC_MXC) > void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) > diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h > index 0962d3c..87ff0a3 100644 > --- a/include/configs/mx6qarm2.h > +++ b/include/configs/mx6qarm2.h > @@ -37,7 +37,6 @@ > /* Size of malloc() pool */ > #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) > > -#define CONFIG_ARCH_CPU_INIT > #define CONFIG_BOARD_EARLY_INIT_F > #define CONFIG_MXC_GPIO > > diff --git a/include/configs/mx6qsabrelite.h > b/include/configs/mx6qsabrelite.h index 93000f0..85e6570 100644 > --- a/include/configs/mx6qsabrelite.h > +++ b/include/configs/mx6qsabrelite.h > @@ -37,7 +37,6 @@ > /* Size of malloc() pool */ > #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) > > -#define CONFIG_ARCH_CPU_INIT > #define CONFIG_BOARD_EARLY_INIT_F > #define CONFIG_MXC_GPIO
Hi Fabio, Le Thu, 1 Mar 2012 19:31:45 +0100, Marek Vasut <marex@denx.de> a écrit : > > No need to define CONFIG_ARCH_CPU_INIT. > > > > All mx6 based boards should use arch_cpu_init(). > > > > Acked-by: Marek Vasut <marex@denx.de> > > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > > --- Applied (rebased) to u-boot-arm/master, thanks. Amicalement,
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 2ac74b5..2d07099 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -37,7 +37,6 @@ u32 get_cpu_rev(void) return system_rev; } -#ifdef CONFIG_ARCH_CPU_INIT void init_aips(void) { struct aipstz_regs *aips1, *aips2; @@ -77,7 +76,6 @@ int arch_cpu_init(void) return 0; } -#endif #if defined(CONFIG_FEC_MXC) void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 0962d3c..87ff0a3 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -37,7 +37,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) -#define CONFIG_ARCH_CPU_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MXC_GPIO diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 93000f0..85e6570 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -37,7 +37,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) -#define CONFIG_ARCH_CPU_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MXC_GPIO
No need to define CONFIG_ARCH_CPU_INIT. All mx6 based boards should use arch_cpu_init(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- arch/arm/cpu/armv7/mx6/soc.c | 2 -- include/configs/mx6qarm2.h | 1 - include/configs/mx6qsabrelite.h | 1 - 3 files changed, 0 insertions(+), 4 deletions(-)