@@ -55,7 +55,6 @@ void ventana_pinmux_init(void);
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-pinmux", TEGRA_APB_MISC_BASE + 0x14, "tegra-pinmux", NULL),
- OF_DEV_AUXDATA("nvidia,tegra20-gpio", TEGRA_GPIO_BASE, "tegra-gpio", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
@@ -15,13 +15,11 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio.h>
#include <linux/of.h>
#include <mach/pinmux.h>
#include <mach/pinmux-tegra20.h>
-#include "gpio-names.h"
#include "board-harmony.h"
#include "board-pinmux.h"
@@ -144,24 +142,9 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-static struct tegra_gpio_table gpio_table[] = {
- { .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_POWER, .enable = true },
- { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
- { .gpio = TEGRA_GPIO_HP_DET, .enable = true },
- { .gpio = TEGRA_GPIO_INT_MIC_EN, .enable = true },
- { .gpio = TEGRA_GPIO_EXT_MIC_EN, .enable = true },
-};
-
static struct tegra_board_pinmux_conf conf = {
.pgs = harmony_pinmux,
.pg_count = ARRAY_SIZE(harmony_pinmux),
- .gpios = gpio_table,
- .gpio_count = ARRAY_SIZE(gpio_table),
};
void harmony_pinmux_init(void)
@@ -15,13 +15,11 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio.h>
#include <linux/of.h>
#include <mach/pinmux.h>
#include <mach/pinmux-tegra20.h>
-#include "gpio-names.h"
#include "board-paz00.h"
#include "board-pinmux.h"
@@ -144,21 +142,9 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-static struct tegra_gpio_table gpio_table[] = {
- { .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
- { .gpio = TEGRA_ULPI_RST, .enable = true },
- { .gpio = TEGRA_WIFI_PWRN, .enable = true },
- { .gpio = TEGRA_WIFI_RST, .enable = true },
- { .gpio = TEGRA_WIFI_LED, .enable = true },
-};
-
static struct tegra_board_pinmux_conf conf = {
.pgs = paz00_pinmux,
.pg_count = ARRAY_SIZE(paz00_pinmux),
- .gpios = gpio_table,
- .gpio_count = ARRAY_SIZE(gpio_table),
};
void paz00_pinmux_init(void)
@@ -18,7 +18,6 @@
#include <linux/of.h>
#include <linux/string.h>
-#include <mach/gpio-tegra.h>
#include <mach/pinmux.h>
#include "board-pinmux.h"
@@ -26,18 +25,6 @@
struct tegra_board_pinmux_conf *confs[2];
-static void tegra_board_pinmux_setup_gpios(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(confs); i++) {
- if (!confs[i])
- continue;
-
- tegra_gpio_config(confs[i]->gpios, confs[i]->gpio_count);
- }
-}
-
static void tegra_board_pinmux_setup_pinmux(void)
{
int i;
@@ -57,29 +44,12 @@ static void tegra_board_pinmux_setup_pinmux(void)
static int tegra_board_pinmux_bus_notify(struct notifier_block *nb,
unsigned long event, void *vdev)
{
- static bool had_gpio;
- static bool had_pinmux;
-
- struct device *dev = vdev;
- const char *devname;
-
if (event != BUS_NOTIFY_BOUND_DRIVER)
return NOTIFY_DONE;
- devname = dev_name(dev);
+ tegra_board_pinmux_setup_pinmux();
- if (!had_gpio && !strcmp(devname, GPIO_DEV)) {
- tegra_board_pinmux_setup_gpios();
- had_gpio = true;
- } else if (!had_pinmux && !strcmp(devname, PINMUX_DEV)) {
- tegra_board_pinmux_setup_pinmux();
- had_pinmux = true;
- }
-
- if (had_gpio && had_pinmux)
- return NOTIFY_STOP_MASK;
- else
- return NOTIFY_DONE;
+ return NOTIFY_STOP_MASK;
}
static struct notifier_block nb = {
@@ -15,11 +15,9 @@
#ifndef __MACH_TEGRA_BOARD_PINMUX_H
#define __MACH_TEGRA_BOARD_PINMUX_H
-#define GPIO_DEV "tegra-gpio"
#define PINMUX_DEV "tegra-pinmux"
struct tegra_pingroup_config;
-struct tegra_gpio_table;
struct tegra_board_pinmux_conf {
struct tegra_pingroup_config *pgs;
@@ -27,9 +25,6 @@ struct tegra_board_pinmux_conf {
struct tegra_drive_pingroup_config *drives;
int drive_count;
-
- struct tegra_gpio_table *gpios;
- int gpio_count;
};
void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
@@ -15,13 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
#include <linux/of.h>
#include <mach/pinmux.h>
#include <mach/pinmux-tegra20.h>
-#include "gpio-names.h"
#include "board-pinmux.h"
#include "board-seaboard.h"
@@ -179,35 +177,9 @@ static struct tegra_pingroup_config ventana_pinmux[] = {
{TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
};
-static struct tegra_gpio_table common_gpio_table[] = {
- { .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
- { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
-};
-
-static struct tegra_gpio_table seaboard_gpio_table[] = {
- { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
- { .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
- { .gpio = TEGRA_GPIO_HP_DET, .enable = true },
- { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
- { .gpio = TEGRA_GPIO_USB1, .enable = true },
-};
-
-static struct tegra_gpio_table ventana_gpio_table[] = {
- /* hp_det */
- { .gpio = TEGRA_GPIO_PW2, .enable = true },
- /* int_mic_en */
- { .gpio = TEGRA_GPIO_PX0, .enable = true },
- /* ext_mic_en */
- { .gpio = TEGRA_GPIO_PX1, .enable = true },
-};
-
static struct tegra_board_pinmux_conf common_conf = {
.pgs = common_pinmux,
.pg_count = ARRAY_SIZE(common_pinmux),
- .gpios = common_gpio_table,
- .gpio_count = ARRAY_SIZE(common_gpio_table),
};
static struct tegra_board_pinmux_conf seaboard_conf = {
@@ -215,15 +187,11 @@ static struct tegra_board_pinmux_conf seaboard_conf = {
.pg_count = ARRAY_SIZE(seaboard_pinmux),
.drives = seaboard_drive_pinmux,
.drive_count = ARRAY_SIZE(seaboard_drive_pinmux),
- .gpios = seaboard_gpio_table,
- .gpio_count = ARRAY_SIZE(seaboard_gpio_table),
};
static struct tegra_board_pinmux_conf ventana_conf = {
.pgs = ventana_pinmux,
.pg_count = ARRAY_SIZE(ventana_pinmux),
- .gpios = ventana_gpio_table,
- .gpio_count = ARRAY_SIZE(ventana_gpio_table),
};
void seaboard_pinmux_init(void)
@@ -261,7 +261,6 @@ static void __init tegra_kaen_init(void)
debug_uart_platform_data[0].irq = INT_UARTB;
seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
- tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
seaboard_common_init();
@@ -13,7 +13,6 @@
* GNU General Public License for more details.
*
*/
-#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
@@ -21,7 +20,6 @@
#include <mach/pinmux.h>
#include <mach/pinmux-tegra20.h>
-#include "gpio-names.h"
#include "board-pinmux.h"
#include "board-trimslice.h"
@@ -144,19 +142,9 @@ static struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-static struct tegra_gpio_table gpio_table[] = {
- { .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
- { .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
-
- { .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */
- { .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */
-};
-
static struct tegra_board_pinmux_conf conf = {
.pgs = trimslice_pinmux,
.pg_count = ARRAY_SIZE(trimslice_pinmux),
- .gpios = gpio_table,
- .gpio_count = ARRAY_SIZE(gpio_table),
};
void trimslice_pinmux_init(void)
@@ -25,13 +25,4 @@
#define TEGRA_NR_GPIOS INT_GPIO_NR
-struct tegra_gpio_table {
- int gpio; /* GPIO number */
- bool enable; /* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
#endif
@@ -710,7 +710,6 @@ struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
err = -ENXIO;
goto err1;
}
- tegra_gpio_enable(ulpi_config->reset_gpio);
gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
gpio_direction_output(ulpi_config->reset_gpio, 0);
phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
@@ -29,7 +29,6 @@
#include <asm/mach/irq.h>
-#include <mach/gpio-tegra.h>
#include <mach/iomap.h>
#include <mach/suspend.h>
@@ -105,14 +104,32 @@ static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
tegra_gpio_writel(val, reg);
}
-void tegra_gpio_enable(int gpio)
+int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
{
- tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
+ /*
+ * We should call pinctrl_request_gpio() here. However, we can't. Tegra
+ * muxes pins in groups not individually, and real boards exist where
+ * most of a pin group needs to be used for some function, yet some of
+ * the pins aren't actually used by that function in the mode the
+ * controller operates on the board, and so those pins can be used as
+ * GPIOs.
+ *
+ * This is true in practice on Seaboard/Springbank, where pin group ATC
+ * is used by the NAND controller, but pin GMI_IORDY_PI5 is used as a
+ * GPIO for the SD card slot's CD signal.
+ *
+ * On Tegra30, pins are muxed in groups and hence we could call
+ * pinctrl here, but we don't for now.
+ */
+ tegra_gpio_mask_write(GPIO_MSK_CNF(offset), offset, 1);
+
+ return 0;
}
-void tegra_gpio_disable(int gpio)
+void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
{
- tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
+ tegra_gpio_mask_write(GPIO_MSK_CNF(offset), offset, 0);
+ /* Similarly, we should call pinctrl_free_gpio() here */
}
static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -146,13 +163,14 @@ static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
static struct gpio_chip tegra_gpio_chip = {
.label = "tegra-gpio",
+ .request = tegra_gpio_request,
+ .free = tegra_gpio_free,
.direction_input = tegra_gpio_direction_input,
.get = tegra_gpio_get,
.direction_output = tegra_gpio_direction_output,
.set = tegra_gpio_set,
.to_irq = tegra_gpio_to_irq,
.base = 0,
- .ngpio = TEGRA_NR_GPIOS,
};
static void tegra_gpio_irq_ack(struct irq_data *d)
@@ -459,20 +477,6 @@ static int __init tegra_gpio_init(void)
}
postcore_initcall(tegra_gpio_init);
-void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
-{
- int i;
-
- for (i = 0; i < num; i++) {
- int gpio = table[i].gpio;
-
- if (table[i].enable)
- tegra_gpio_enable(gpio);
- else
- tegra_gpio_disable(gpio);
- }
-}
-
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
@@ -270,7 +270,6 @@ static int __devinit sdhci_tegra_probe(struct platform_device *pdev)
"failed to allocate power gpio\n");
goto err_power_req;
}
- tegra_gpio_enable(plat->power_gpio);
gpio_direction_output(plat->power_gpio, 1);
}
@@ -281,7 +280,6 @@ static int __devinit sdhci_tegra_probe(struct platform_device *pdev)
"failed to allocate cd gpio\n");
goto err_cd_req;
}
- tegra_gpio_enable(plat->cd_gpio);
gpio_direction_input(plat->cd_gpio);
rc = request_irq(gpio_to_irq(plat->cd_gpio), carddetect_irq,
@@ -302,7 +300,6 @@ static int __devinit sdhci_tegra_probe(struct platform_device *pdev)
"failed to allocate wp gpio\n");
goto err_wp_req;
}
- tegra_gpio_enable(plat->wp_gpio);
gpio_direction_input(plat->wp_gpio);
}
@@ -330,23 +327,17 @@ err_add_host:
clk_disable(pltfm_host->clk);
clk_put(pltfm_host->clk);
err_clk_get:
- if (gpio_is_valid(plat->wp_gpio)) {
- tegra_gpio_disable(plat->wp_gpio);
+ if (gpio_is_valid(plat->wp_gpio))
gpio_free(plat->wp_gpio);
- }
err_wp_req:
if (gpio_is_valid(plat->cd_gpio))
free_irq(gpio_to_irq(plat->cd_gpio), host);
err_cd_irq_req:
- if (gpio_is_valid(plat->cd_gpio)) {
- tegra_gpio_disable(plat->cd_gpio);
+ if (gpio_is_valid(plat->cd_gpio))
gpio_free(plat->cd_gpio);
- }
err_cd_req:
- if (gpio_is_valid(plat->power_gpio)) {
- tegra_gpio_disable(plat->power_gpio);
+ if (gpio_is_valid(plat->power_gpio))
gpio_free(plat->power_gpio);
- }
err_power_req:
err_no_plat:
sdhci_pltfm_free(pdev);
@@ -363,21 +354,16 @@ static int __devexit sdhci_tegra_remove(struct platform_device *pdev)
sdhci_remove_host(host, dead);
- if (gpio_is_valid(plat->wp_gpio)) {
- tegra_gpio_disable(plat->wp_gpio);
+ if (gpio_is_valid(plat->wp_gpio))
gpio_free(plat->wp_gpio);
- }
if (gpio_is_valid(plat->cd_gpio)) {
free_irq(gpio_to_irq(plat->cd_gpio), host);
- tegra_gpio_disable(plat->cd_gpio);
gpio_free(plat->cd_gpio);
}
- if (gpio_is_valid(plat->power_gpio)) {
- tegra_gpio_disable(plat->power_gpio);
+ if (gpio_is_valid(plat->power_gpio))
gpio_free(plat->power_gpio);
- }
clk_disable(pltfm_host->clk);
clk_put(pltfm_host->clk);
Recent pinctrl discussions concluded that gpio_request() and other gpiolib APIs should in fact do whatever is required to mux a GPIO onto pins, by calling pinctrl APIs if required. This change implements this for the Tegra GPIO driver, and removes the old Tegra-specific APIs which did this. Signed-off-by: Stephen Warren <swarren@nvidia.com> --- I don't believe this depends on other patches. There may be some slight context dependencies; this patch was generated against next-20120217, with my recently posted "gpio: tegra: Fix build issue due to irq_domain rework." applied on top. arch/arm/mach-tegra/board-dt-tegra20.c | 1 - arch/arm/mach-tegra/board-harmony-pinmux.c | 17 --------- arch/arm/mach-tegra/board-paz00-pinmux.c | 14 -------- arch/arm/mach-tegra/board-pinmux.c | 34 +------------------ arch/arm/mach-tegra/board-pinmux.h | 5 --- arch/arm/mach-tegra/board-seaboard-pinmux.c | 32 ------------------ arch/arm/mach-tegra/board-seaboard.c | 1 - arch/arm/mach-tegra/board-trimslice-pinmux.c | 12 ------- arch/arm/mach-tegra/include/mach/gpio-tegra.h | 9 ----- arch/arm/mach-tegra/usb_phy.c | 1 - drivers/gpio/gpio-tegra.c | 44 +++++++++++++----------- drivers/mmc/host/sdhci-tegra.c | 24 +++----------- 12 files changed, 31 insertions(+), 163 deletions(-)