Message ID | 1329244275-28130-1-git-send-email-snanda@chromium.org |
---|---|
State | Awaiting Upstream, archived |
Delegated to: | David Miller |
Headers | show |
Fixed Francois Romieu's email address. On Tue, Feb 14, 2012 at 10:31 AM, Sameer Nanda <snanda@chromium.org> wrote: > With runtime PM, if the ethernet cable is disconnected, the device is > transitioned to D3 state to conserve energy. If the system is shutdown > in this state, any register accesses in rtl_shutdown are dropped on > the floor. > > This patch transitions the device back to D0 state in rtl_shutdown if > the device was runtime PM suspended. In addition, since runtiome PM > also mucks around with WOL options, the saved WOL options are also > restored in rtl_shutdown. > > Signed-off-by: Sameer Nanda <snanda@chromium.org> > --- > drivers/net/ethernet/realtek/r8169.c | 12 ++++++++++++ > 1 files changed, 12 insertions(+), 0 deletions(-) > > diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c > index a6921b7..4a894e6 100644 > --- a/drivers/net/ethernet/realtek/r8169.c > +++ b/drivers/net/ethernet/realtek/r8169.c > @@ -691,6 +691,7 @@ struct rtl8169_private { > u16 intr_event; > u16 napi_event; > u16 intr_mask; > + bool runtime_suspended; > > struct mdio_ops { > void (*write)(void __iomem *, int, int); > @@ -4308,6 +4309,7 @@ static int rtl8169_open(struct net_device *dev) > rtl_hw_start(dev); > > tp->saved_wolopts = 0; > + tp->runtime_suspended = false; > pm_runtime_put_noidle(&pdev->dev); > > rtl8169_check_link_status(dev, tp, ioaddr); > @@ -6106,6 +6108,7 @@ static int rtl8169_runtime_suspend(struct device *device) > spin_lock_irq(&tp->lock); > tp->saved_wolopts = __rtl8169_get_wol(tp); > __rtl8169_set_wol(tp, WAKE_ANY); > + tp->runtime_suspended = true; > spin_unlock_irq(&tp->lock); > > rtl8169_net_suspend(dev); > @@ -6125,6 +6128,7 @@ static int rtl8169_runtime_resume(struct device *device) > spin_lock_irq(&tp->lock); > __rtl8169_set_wol(tp, tp->saved_wolopts); > tp->saved_wolopts = 0; > + tp->runtime_suspended = false; > spin_unlock_irq(&tp->lock); > > rtl8169_init_phy(dev, tp); > @@ -6188,6 +6192,10 @@ static void rtl_shutdown(struct pci_dev *pdev) > struct net_device *dev = pci_get_drvdata(pdev); > struct rtl8169_private *tp = netdev_priv(dev); > > + /* Get the device back to D0 state if it was runtime suspended. */ > + if (tp->runtime_suspended) > + pci_set_power_state(pdev, PCI_D0); > + > rtl8169_net_suspend(dev); > > /* Restore original MAC address */ > @@ -6195,6 +6203,10 @@ static void rtl_shutdown(struct pci_dev *pdev) > > spin_lock_irq(&tp->lock); > > + /* Restore WOL flags if they were messed around with. */ > + if (tp->saved_wolopts) > + __rtl8169_set_wol(tp, tp->saved_wolopts); > + > rtl8169_hw_reset(tp); > > spin_unlock_irq(&tp->lock); > -- > 1.7.7.3 >
Fixed Rafael's email address. Sorry about the dupe emails. On Tue, Feb 14, 2012 at 10:33 AM, Sameer Nanda <snanda@chromium.org> wrote: > Fixed Francois Romieu's email address. > > On Tue, Feb 14, 2012 at 10:31 AM, Sameer Nanda <snanda@chromium.org> wrote: >> With runtime PM, if the ethernet cable is disconnected, the device is >> transitioned to D3 state to conserve energy. If the system is shutdown >> in this state, any register accesses in rtl_shutdown are dropped on >> the floor. >> >> This patch transitions the device back to D0 state in rtl_shutdown if >> the device was runtime PM suspended. In addition, since runtiome PM >> also mucks around with WOL options, the saved WOL options are also >> restored in rtl_shutdown. >> >> Signed-off-by: Sameer Nanda <snanda@chromium.org> >> --- >> drivers/net/ethernet/realtek/r8169.c | 12 ++++++++++++ >> 1 files changed, 12 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c >> index a6921b7..4a894e6 100644 >> --- a/drivers/net/ethernet/realtek/r8169.c >> +++ b/drivers/net/ethernet/realtek/r8169.c >> @@ -691,6 +691,7 @@ struct rtl8169_private { >> u16 intr_event; >> u16 napi_event; >> u16 intr_mask; >> + bool runtime_suspended; >> >> struct mdio_ops { >> void (*write)(void __iomem *, int, int); >> @@ -4308,6 +4309,7 @@ static int rtl8169_open(struct net_device *dev) >> rtl_hw_start(dev); >> >> tp->saved_wolopts = 0; >> + tp->runtime_suspended = false; >> pm_runtime_put_noidle(&pdev->dev); >> >> rtl8169_check_link_status(dev, tp, ioaddr); >> @@ -6106,6 +6108,7 @@ static int rtl8169_runtime_suspend(struct device *device) >> spin_lock_irq(&tp->lock); >> tp->saved_wolopts = __rtl8169_get_wol(tp); >> __rtl8169_set_wol(tp, WAKE_ANY); >> + tp->runtime_suspended = true; >> spin_unlock_irq(&tp->lock); >> >> rtl8169_net_suspend(dev); >> @@ -6125,6 +6128,7 @@ static int rtl8169_runtime_resume(struct device *device) >> spin_lock_irq(&tp->lock); >> __rtl8169_set_wol(tp, tp->saved_wolopts); >> tp->saved_wolopts = 0; >> + tp->runtime_suspended = false; >> spin_unlock_irq(&tp->lock); >> >> rtl8169_init_phy(dev, tp); >> @@ -6188,6 +6192,10 @@ static void rtl_shutdown(struct pci_dev *pdev) >> struct net_device *dev = pci_get_drvdata(pdev); >> struct rtl8169_private *tp = netdev_priv(dev); >> >> + /* Get the device back to D0 state if it was runtime suspended. */ >> + if (tp->runtime_suspended) >> + pci_set_power_state(pdev, PCI_D0); >> + >> rtl8169_net_suspend(dev); >> >> /* Restore original MAC address */ >> @@ -6195,6 +6203,10 @@ static void rtl_shutdown(struct pci_dev *pdev) >> >> spin_lock_irq(&tp->lock); >> >> + /* Restore WOL flags if they were messed around with. */ >> + if (tp->saved_wolopts) >> + __rtl8169_set_wol(tp, tp->saved_wolopts); >> + >> rtl8169_hw_reset(tp); >> >> spin_unlock_irq(&tp->lock); >> -- >> 1.7.7.3 >> > > > > -- > Sameer
Sameer Nanda <snanda@chromium.org> : > With runtime PM, if the ethernet cable is disconnected, the device is > transitioned to D3 state to conserve energy. If the system is shutdown > in this state, any register accesses in rtl_shutdown are dropped on > the floor. > > This patch transitions the device back to D0 state in rtl_shutdown if > the device was runtime PM suspended. In addition, since runtiome PM > also mucks around with WOL options, the saved WOL options are also > restored in rtl_shutdown. Ok. I'll leave Rafael choose if he prefers the runtime pm layer to handle it or not.
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index a6921b7..4a894e6 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -691,6 +691,7 @@ struct rtl8169_private { u16 intr_event; u16 napi_event; u16 intr_mask; + bool runtime_suspended; struct mdio_ops { void (*write)(void __iomem *, int, int); @@ -4308,6 +4309,7 @@ static int rtl8169_open(struct net_device *dev) rtl_hw_start(dev); tp->saved_wolopts = 0; + tp->runtime_suspended = false; pm_runtime_put_noidle(&pdev->dev); rtl8169_check_link_status(dev, tp, ioaddr); @@ -6106,6 +6108,7 @@ static int rtl8169_runtime_suspend(struct device *device) spin_lock_irq(&tp->lock); tp->saved_wolopts = __rtl8169_get_wol(tp); __rtl8169_set_wol(tp, WAKE_ANY); + tp->runtime_suspended = true; spin_unlock_irq(&tp->lock); rtl8169_net_suspend(dev); @@ -6125,6 +6128,7 @@ static int rtl8169_runtime_resume(struct device *device) spin_lock_irq(&tp->lock); __rtl8169_set_wol(tp, tp->saved_wolopts); tp->saved_wolopts = 0; + tp->runtime_suspended = false; spin_unlock_irq(&tp->lock); rtl8169_init_phy(dev, tp); @@ -6188,6 +6192,10 @@ static void rtl_shutdown(struct pci_dev *pdev) struct net_device *dev = pci_get_drvdata(pdev); struct rtl8169_private *tp = netdev_priv(dev); + /* Get the device back to D0 state if it was runtime suspended. */ + if (tp->runtime_suspended) + pci_set_power_state(pdev, PCI_D0); + rtl8169_net_suspend(dev); /* Restore original MAC address */ @@ -6195,6 +6203,10 @@ static void rtl_shutdown(struct pci_dev *pdev) spin_lock_irq(&tp->lock); + /* Restore WOL flags if they were messed around with. */ + if (tp->saved_wolopts) + __rtl8169_set_wol(tp, tp->saved_wolopts); + rtl8169_hw_reset(tp); spin_unlock_irq(&tp->lock);
With runtime PM, if the ethernet cable is disconnected, the device is transitioned to D3 state to conserve energy. If the system is shutdown in this state, any register accesses in rtl_shutdown are dropped on the floor. This patch transitions the device back to D0 state in rtl_shutdown if the device was runtime PM suspended. In addition, since runtiome PM also mucks around with WOL options, the saved WOL options are also restored in rtl_shutdown. Signed-off-by: Sameer Nanda <snanda@chromium.org> --- drivers/net/ethernet/realtek/r8169.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)