Message ID | 20240301-net-v7-4-45823597d4d4@outlook.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | net: hisi-femac: add support for Hi3798MV200, remove unmaintained compatibles | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | total: 0 errors, 1 warnings, 89 lines checked |
robh/patch-applied | success | |
robh/dtbs-check | warning | build log |
robh/dt-meta-schema | success |
On 01/03/2024 04:35, Yang Xiwen via B4 Relay wrote: > From: Yang Xiwen <forbidden405@outlook.com> > > Convert the old text binding to new YAML. > > While at it, make some changes to the binding: > - The version numbers are not documented publicly. The version also does > not change programming interface. Remove it until it's really needed. > - A few clocks are missing in old binding file. Add them to match the real > hardware. > > Signed-off-by: Yang Xiwen <forbidden405@outlook.com> > --- > .../bindings/net/hisilicon,hisi-femac.yaml | 89 ++++++++++++++++++++++ > .../devicetree/bindings/net/hisilicon-femac.txt | 41 ---------- > 2 files changed, 89 insertions(+), 41 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml > new file mode 100644 > index 000000000000..ba207f2c9ae4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml > @@ -0,0 +1,89 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/hisilicon,hisi-femac.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Hisilicon Fast Ethernet MAC controller > + > +maintainers: > + - Yang Xiwen <forbidden405@foxmail.com> > + > +allOf: > + - $ref: ethernet-controller.yaml > + > +properties: > + compatible: > + items: > + - enum: > + - hisilicon,hi3516cv300-femac > + - const: hisilicon,hisi-femac This is a friendly reminder during the review process. It seems my or other reviewer's previous comments were not fully addressed. Maybe the feedback got lost between the quotes, maybe you just forgot to apply it. Please go back to the previous discussion and either implement all requested changes or keep discussing them. Thank you. Best regards, Krzysztof
On 3/1/2024 2:49 PM, Krzysztof Kozlowski wrote: > On 01/03/2024 04:35, Yang Xiwen via B4 Relay wrote: >> From: Yang Xiwen <forbidden405@outlook.com> >> >> Convert the old text binding to new YAML. >> >> While at it, make some changes to the binding: >> - The version numbers are not documented publicly. The version also does >> not change programming interface. Remove it until it's really needed. >> - A few clocks are missing in old binding file. Add them to match the real >> hardware. >> >> Signed-off-by: Yang Xiwen <forbidden405@outlook.com> >> --- >> .../bindings/net/hisilicon,hisi-femac.yaml | 89 ++++++++++++++++++++++ >> .../devicetree/bindings/net/hisilicon-femac.txt | 41 ---------- >> 2 files changed, 89 insertions(+), 41 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml >> new file mode 100644 >> index 000000000000..ba207f2c9ae4 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml >> @@ -0,0 +1,89 @@ >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/net/hisilicon,hisi-femac.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Hisilicon Fast Ethernet MAC controller >> + >> +maintainers: >> + - Yang Xiwen <forbidden405@foxmail.com> >> + >> +allOf: >> + - $ref: ethernet-controller.yaml >> + >> +properties: >> + compatible: >> + items: >> + - enum: >> + - hisilicon,hi3516cv300-femac >> + - const: hisilicon,hisi-femac > > This is a friendly reminder during the review process. > > It seems my or other reviewer's previous comments were not fully > addressed. Maybe the feedback got lost between the quotes, maybe you > just forgot to apply it. Please go back to the previous discussion and > either implement all requested changes or keep discussing them. Could you please tell me which one did i miss? I have read all replies to v1-v7 once again and fails to find one. Do you mean the discussion about "phy-mode" and "phy-connection-type"? I've decided to drop that commit and stick to "phy-mode", in this patch set. > > Thank you. > > > > Best regards, > Krzysztof >
On 05/03/2024 03:58, Yang Xiwen wrote: > On 3/1/2024 2:49 PM, Krzysztof Kozlowski wrote: >> On 01/03/2024 04:35, Yang Xiwen via B4 Relay wrote: >>> From: Yang Xiwen <forbidden405@outlook.com> >>> >>> Convert the old text binding to new YAML. >>> >>> While at it, make some changes to the binding: >>> - The version numbers are not documented publicly. The version also does >>> not change programming interface. Remove it until it's really needed. >>> - A few clocks are missing in old binding file. Add them to match the real >>> hardware. >>> >>> Signed-off-by: Yang Xiwen <forbidden405@outlook.com> >>> --- >>> .../bindings/net/hisilicon,hisi-femac.yaml | 89 ++++++++++++++++++++++ >>> .../devicetree/bindings/net/hisilicon-femac.txt | 41 ---------- >>> 2 files changed, 89 insertions(+), 41 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml >>> new file mode 100644 >>> index 000000000000..ba207f2c9ae4 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml >>> @@ -0,0 +1,89 @@ >>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/net/hisilicon,hisi-femac.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Hisilicon Fast Ethernet MAC controller >>> + >>> +maintainers: >>> + - Yang Xiwen <forbidden405@foxmail.com> >>> + >>> +allOf: >>> + - $ref: ethernet-controller.yaml >>> + >>> +properties: >>> + compatible: >>> + items: >>> + - enum: >>> + - hisilicon,hi3516cv300-femac >>> + - const: hisilicon,hisi-femac >> >> This is a friendly reminder during the review process. >> >> It seems my or other reviewer's previous comments were not fully >> addressed. Maybe the feedback got lost between the quotes, maybe you >> just forgot to apply it. Please go back to the previous discussion and >> either implement all requested changes or keep discussing them. > > > Could you please tell me which one did i miss? I have read all replies > to v1-v7 once again and fails to find one. > https://lore.kernel.org/all/11d0bf3a-3341-4c7f-9a1a-e7c7bc078725@linaro.org/ Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml new file mode 100644 index 000000000000..ba207f2c9ae4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/hisilicon,hisi-femac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Fast Ethernet MAC controller + +maintainers: + - Yang Xiwen <forbidden405@foxmail.com> + +allOf: + - $ref: ethernet-controller.yaml + +properties: + compatible: + items: + - enum: + - hisilicon,hi3516cv300-femac + - const: hisilicon,hisi-femac + + reg: + items: + - description: The first region is the MAC core register base and size. + - description: The second region is the global MAC control register. + + interrupts: + maxItems: 1 + + clocks: + items: + - description: MAC main clock + - description: MAC bus interface clock + - description: PHY clock + + clock-names: + items: + - const: mac + - const: macif + - const: phy + + resets: + items: + - description: MAC reset signal + - description: PHY reset signal + + reset-names: + items: + - const: mac + - const: phy + + hisilicon,phy-reset-delays-us: + description: PHY reset timing requirement (in micro seconds). + The integrated PHY usually have a special reset timing sequence and must + interact with MAC controller to accomplish the entire reset procedure. So + these properties belong to MAC controller, not PHY. + items: + - description: pre-reset delay for PHY + - description: reset pulse for PHY + - description: post-reset delay for PHY + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - phy-mode + - phy-handle + - hisilicon,phy-reset-delays-us + +unevaluatedProperties: false + +examples: + - | + ethernet@10090000 { + compatible = "hisilicon,hi3516cv300-femac", "hisilicon,hisi-femac"; + reg = <0x10090000 0x1000>, <0x10091300 0x200>; + interrupts = <12>; + clocks = <&clk_femac>, <&clk_femacif>, <&clk_fephy>; + clock-names = "mac", "macif", "phy"; + resets = <&crg 0xec 0>, <&crg 0xec 3>; + reset-names = "mac", "phy"; + mac-address = [00 00 00 00 00 00]; + phy-mode = "mii"; + phy-handle = <&fephy>; + hisilicon,phy-reset-delays-us = <10000 20000 20000>; + }; diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac.txt b/Documentation/devicetree/bindings/net/hisilicon-femac.txt deleted file mode 100644 index 5f96976f3cea..000000000000 --- a/Documentation/devicetree/bindings/net/hisilicon-femac.txt +++ /dev/null @@ -1,41 +0,0 @@ -Hisilicon Fast Ethernet MAC controller - -Required properties: -- compatible: should contain one of the following version strings: - * "hisilicon,hisi-femac-v1" - * "hisilicon,hisi-femac-v2" - and the soc string "hisilicon,hi3516cv300-femac". -- reg: specifies base physical address(s) and size of the device registers. - The first region is the MAC core register base and size. - The second region is the global MAC control register. -- interrupts: should contain the MAC interrupt. -- clocks: A phandle to the MAC main clock. -- resets: should contain the phandle to the MAC reset signal(required) and - the PHY reset signal(optional). -- reset-names: should contain the reset signal name "mac"(required) - and "phy"(optional). -- phy-mode: see ethernet.txt [1]. -- phy-handle: see ethernet.txt [1]. -- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given. - The 1st cell is reset pre-delay in micro seconds. - The 2nd cell is reset pulse in micro seconds. - The 3rd cell is reset post-delay in micro seconds. - -The MAC address will be determined using the optional properties -defined in ethernet.txt[1]. - -[1] Documentation/devicetree/bindings/net/ethernet.txt - -Example: - hisi_femac: ethernet@10090000 { - compatible = "hisilicon,hi3516cv300-femac","hisilicon,hisi-femac-v2"; - reg = <0x10090000 0x1000>,<0x10091300 0x200>; - interrupts = <12>; - clocks = <&crg HI3518EV200_ETH_CLK>; - resets = <&crg 0xec 0>,<&crg 0xec 3>; - reset-names = "mac","phy"; - mac-address = [00 00 00 00 00 00]; - phy-mode = "mii"; - phy-handle = <&phy0>; - hisilicon,phy-reset-delays-us = <10000 20000 20000>; - };