Message ID | 1328814329-9071-1-git-send-email-paul@codesourcery.com |
---|---|
State | New |
Headers | show |
Am 09.02.2012 20:05, schrieb Paul Brook: > libcacard is only used by system emulation. > Only define libcacard_libs/cflags once. > > Signed-off-by: Paul Brook <paul@codesourcery.com> Looks okay on first sight, but Alon (cc'ed) may want to check. Andreas > --- > configure | 12 ++++++------ > 1 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/configure b/configure > index 763db24..faa65a8 100755 > --- a/configure > +++ b/configure > @@ -2569,7 +2569,7 @@ EOF > compile_prog "$smartcard_cflags $libcacard_cflags" "$libcacard_libs"; then > smartcard_nss="yes" > QEMU_CFLAGS="$QEMU_CFLAGS $smartcard_cflags $libcacard_cflags" > - LIBS="$libcacard_libs $LIBS" > + libs_softmmu="$libcacard_libs $libs_softmmu" > else > if test "$smartcard_nss" = "yes"; then > feature_not_found "nss" > @@ -3209,6 +3209,8 @@ fi > > if test "$smartcard_nss" = "yes" ; then > echo "CONFIG_SMARTCARD_NSS=y" >> $config_host_mak > + echo "libcacard_libs=$libcacard_libs" >> $config_host_mak > + echo "libcacard_cflags=$libcacard_cflags" >> $config_host_mak > fi > > if test "$usb_redir" = "yes" ; then > @@ -3628,6 +3630,9 @@ if test "$target_softmmu" = "yes" ; then > echo "LIBS+=$libs_softmmu $target_libs_softmmu" >> $config_target_mak > echo "HWDIR=../libhw$target_phys_bits" >> $config_target_mak > echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak > + if test "$smartcard_nss" = "yes" ; then > + echo "subdir-$target: subdir-libcacard" >> $config_host_mak > + fi > fi > if test "$target_user_only" = "yes" ; then > echo "CONFIG_USER_ONLY=y" >> $config_target_mak > @@ -3639,11 +3644,6 @@ fi > if test "$target_darwin_user" = "yes" ; then > echo "CONFIG_DARWIN_USER=y" >> $config_target_mak > fi > -if test "$smartcard_nss" = "yes" ; then > - echo "subdir-$target: subdir-libcacard" >> $config_host_mak > - echo "libcacard_libs=$libcacard_libs" >> $config_host_mak > - echo "libcacard_cflags=$libcacard_cflags" >> $config_host_mak > -fi > list="" > if test ! -z "$gdb_xml_files" ; then > for x in $gdb_xml_files; do
On Thu, Feb 09, 2012 at 07:05:29PM +0000, Paul Brook wrote: > libcacard is only used by system emulation. > Only define libcacard_libs/cflags once. > ACK. Anthony, do you want a single patch pull request in general or is it ok to ask that you pick this directly? Alon > Signed-off-by: Paul Brook <paul@codesourcery.com> > --- > configure | 12 ++++++------ > 1 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/configure b/configure > index 763db24..faa65a8 100755 > --- a/configure > +++ b/configure > @@ -2569,7 +2569,7 @@ EOF > compile_prog "$smartcard_cflags $libcacard_cflags" "$libcacard_libs"; then > smartcard_nss="yes" > QEMU_CFLAGS="$QEMU_CFLAGS $smartcard_cflags $libcacard_cflags" > - LIBS="$libcacard_libs $LIBS" > + libs_softmmu="$libcacard_libs $libs_softmmu" > else > if test "$smartcard_nss" = "yes"; then > feature_not_found "nss" > @@ -3209,6 +3209,8 @@ fi > > if test "$smartcard_nss" = "yes" ; then > echo "CONFIG_SMARTCARD_NSS=y" >> $config_host_mak > + echo "libcacard_libs=$libcacard_libs" >> $config_host_mak > + echo "libcacard_cflags=$libcacard_cflags" >> $config_host_mak > fi > > if test "$usb_redir" = "yes" ; then > @@ -3628,6 +3630,9 @@ if test "$target_softmmu" = "yes" ; then > echo "LIBS+=$libs_softmmu $target_libs_softmmu" >> $config_target_mak > echo "HWDIR=../libhw$target_phys_bits" >> $config_target_mak > echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak > + if test "$smartcard_nss" = "yes" ; then > + echo "subdir-$target: subdir-libcacard" >> $config_host_mak > + fi > fi > if test "$target_user_only" = "yes" ; then > echo "CONFIG_USER_ONLY=y" >> $config_target_mak > @@ -3639,11 +3644,6 @@ fi > if test "$target_darwin_user" = "yes" ; then > echo "CONFIG_DARWIN_USER=y" >> $config_target_mak > fi > -if test "$smartcard_nss" = "yes" ; then > - echo "subdir-$target: subdir-libcacard" >> $config_host_mak > - echo "libcacard_libs=$libcacard_libs" >> $config_host_mak > - echo "libcacard_cflags=$libcacard_cflags" >> $config_host_mak > -fi > list="" > if test ! -z "$gdb_xml_files" ; then > for x in $gdb_xml_files; do > -- > 1.7.8.3 > >
On 02/09/2012 01:05 PM, Paul Brook wrote: > libcacard is only used by system emulation. > Only define libcacard_libs/cflags once. > > Signed-off-by: Paul Brook<paul@codesourcery.com> Ah, I applied this without realizing it was from pbrook :-) Regards, Anthony Liguori > --- > configure | 12 ++++++------ > 1 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/configure b/configure > index 763db24..faa65a8 100755 > --- a/configure > +++ b/configure > @@ -2569,7 +2569,7 @@ EOF > compile_prog "$smartcard_cflags $libcacard_cflags" "$libcacard_libs"; then > smartcard_nss="yes" > QEMU_CFLAGS="$QEMU_CFLAGS $smartcard_cflags $libcacard_cflags" > - LIBS="$libcacard_libs $LIBS" > + libs_softmmu="$libcacard_libs $libs_softmmu" > else > if test "$smartcard_nss" = "yes"; then > feature_not_found "nss" > @@ -3209,6 +3209,8 @@ fi > > if test "$smartcard_nss" = "yes" ; then > echo "CONFIG_SMARTCARD_NSS=y">> $config_host_mak > + echo "libcacard_libs=$libcacard_libs">> $config_host_mak > + echo "libcacard_cflags=$libcacard_cflags">> $config_host_mak > fi > > if test "$usb_redir" = "yes" ; then > @@ -3628,6 +3630,9 @@ if test "$target_softmmu" = "yes" ; then > echo "LIBS+=$libs_softmmu $target_libs_softmmu">> $config_target_mak > echo "HWDIR=../libhw$target_phys_bits">> $config_target_mak > echo "subdir-$target: subdir-libhw$target_phys_bits">> $config_host_mak > + if test "$smartcard_nss" = "yes" ; then > + echo "subdir-$target: subdir-libcacard">> $config_host_mak > + fi > fi > if test "$target_user_only" = "yes" ; then > echo "CONFIG_USER_ONLY=y">> $config_target_mak > @@ -3639,11 +3644,6 @@ fi > if test "$target_darwin_user" = "yes" ; then > echo "CONFIG_DARWIN_USER=y">> $config_target_mak > fi > -if test "$smartcard_nss" = "yes" ; then > - echo "subdir-$target: subdir-libcacard">> $config_host_mak > - echo "libcacard_libs=$libcacard_libs">> $config_host_mak > - echo "libcacard_cflags=$libcacard_cflags">> $config_host_mak > -fi > list="" > if test ! -z "$gdb_xml_files" ; then > for x in $gdb_xml_files; do
On Fri, Feb 17, 2012 at 12:16:53PM -0600, Anthony Liguori wrote: > On 02/09/2012 01:05 PM, Paul Brook wrote: > >libcacard is only used by system emulation. > >Only define libcacard_libs/cflags once. > > > >Signed-off-by: Paul Brook<paul@codesourcery.com> > > Ah, I applied this without realizing it was from pbrook :-) > Fine by me. > Regards, > > Anthony Liguori > > >--- > > configure | 12 ++++++------ > > 1 files changed, 6 insertions(+), 6 deletions(-) > > > >diff --git a/configure b/configure > >index 763db24..faa65a8 100755 > >--- a/configure > >+++ b/configure > >@@ -2569,7 +2569,7 @@ EOF > > compile_prog "$smartcard_cflags $libcacard_cflags" "$libcacard_libs"; then > > smartcard_nss="yes" > > QEMU_CFLAGS="$QEMU_CFLAGS $smartcard_cflags $libcacard_cflags" > >- LIBS="$libcacard_libs $LIBS" > >+ libs_softmmu="$libcacard_libs $libs_softmmu" > > else > > if test "$smartcard_nss" = "yes"; then > > feature_not_found "nss" > >@@ -3209,6 +3209,8 @@ fi > > > > if test "$smartcard_nss" = "yes" ; then > > echo "CONFIG_SMARTCARD_NSS=y">> $config_host_mak > >+ echo "libcacard_libs=$libcacard_libs">> $config_host_mak > >+ echo "libcacard_cflags=$libcacard_cflags">> $config_host_mak > > fi > > > > if test "$usb_redir" = "yes" ; then > >@@ -3628,6 +3630,9 @@ if test "$target_softmmu" = "yes" ; then > > echo "LIBS+=$libs_softmmu $target_libs_softmmu">> $config_target_mak > > echo "HWDIR=../libhw$target_phys_bits">> $config_target_mak > > echo "subdir-$target: subdir-libhw$target_phys_bits">> $config_host_mak > >+ if test "$smartcard_nss" = "yes" ; then > >+ echo "subdir-$target: subdir-libcacard">> $config_host_mak > >+ fi > > fi > > if test "$target_user_only" = "yes" ; then > > echo "CONFIG_USER_ONLY=y">> $config_target_mak > >@@ -3639,11 +3644,6 @@ fi > > if test "$target_darwin_user" = "yes" ; then > > echo "CONFIG_DARWIN_USER=y">> $config_target_mak > > fi > >-if test "$smartcard_nss" = "yes" ; then > >- echo "subdir-$target: subdir-libcacard">> $config_host_mak > >- echo "libcacard_libs=$libcacard_libs">> $config_host_mak > >- echo "libcacard_cflags=$libcacard_cflags">> $config_host_mak > >-fi > > list="" > > if test ! -z "$gdb_xml_files" ; then > > for x in $gdb_xml_files; do > >
diff --git a/configure b/configure index 763db24..faa65a8 100755 --- a/configure +++ b/configure @@ -2569,7 +2569,7 @@ EOF compile_prog "$smartcard_cflags $libcacard_cflags" "$libcacard_libs"; then smartcard_nss="yes" QEMU_CFLAGS="$QEMU_CFLAGS $smartcard_cflags $libcacard_cflags" - LIBS="$libcacard_libs $LIBS" + libs_softmmu="$libcacard_libs $libs_softmmu" else if test "$smartcard_nss" = "yes"; then feature_not_found "nss" @@ -3209,6 +3209,8 @@ fi if test "$smartcard_nss" = "yes" ; then echo "CONFIG_SMARTCARD_NSS=y" >> $config_host_mak + echo "libcacard_libs=$libcacard_libs" >> $config_host_mak + echo "libcacard_cflags=$libcacard_cflags" >> $config_host_mak fi if test "$usb_redir" = "yes" ; then @@ -3628,6 +3630,9 @@ if test "$target_softmmu" = "yes" ; then echo "LIBS+=$libs_softmmu $target_libs_softmmu" >> $config_target_mak echo "HWDIR=../libhw$target_phys_bits" >> $config_target_mak echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak + if test "$smartcard_nss" = "yes" ; then + echo "subdir-$target: subdir-libcacard" >> $config_host_mak + fi fi if test "$target_user_only" = "yes" ; then echo "CONFIG_USER_ONLY=y" >> $config_target_mak @@ -3639,11 +3644,6 @@ fi if test "$target_darwin_user" = "yes" ; then echo "CONFIG_DARWIN_USER=y" >> $config_target_mak fi -if test "$smartcard_nss" = "yes" ; then - echo "subdir-$target: subdir-libcacard" >> $config_host_mak - echo "libcacard_libs=$libcacard_libs" >> $config_host_mak - echo "libcacard_cflags=$libcacard_cflags" >> $config_host_mak -fi list="" if test ! -z "$gdb_xml_files" ; then for x in $gdb_xml_files; do
libcacard is only used by system emulation. Only define libcacard_libs/cflags once. Signed-off-by: Paul Brook <paul@codesourcery.com> --- configure | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)