diff mbox

[v3,14/25] irq_domain: Remove irq_domain_add_simple()

Message ID 1327700179-17454-15-git-send-email-grant.likely@secretlab.ca
State New
Headers show

Commit Message

Grant Likely Jan. 27, 2012, 9:36 p.m. UTC
irq_domain_add_simple() was a stop-gap measure until complete irq_domain
support was complete.  This patch removes the irq_domain_add_simple()
interface.

v2: Updated to pass in host_data pointer on irq_domain allocation.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
---
 arch/arm/mach-imx/mach-imx6q.c      |    3 ++-
 arch/arm/mach-msm/board-msm8x60.c   |    8 ++------
 arch/arm/mach-mx5/imx51-dt.c        |    4 ++--
 arch/arm/mach-mx5/imx53-dt.c        |    4 ++--
 arch/arm/mach-omap2/board-generic.c |    2 +-
 arch/arm/mach-prima2/irq.c          |    2 +-
 drivers/mfd/twl-core.c              |    2 +-
 include/linux/irqdomain.h           |    1 -
 kernel/irq/irqdomain.c              |   10 ++--------
 9 files changed, 13 insertions(+), 23 deletions(-)

Comments

Shawn Guo Jan. 31, 2012, 12:45 p.m. UTC | #1
On Fri, Jan 27, 2012 at 02:36:08PM -0700, Grant Likely wrote:
> irq_domain_add_simple() was a stop-gap measure until complete irq_domain
> support was complete.  This patch removes the irq_domain_add_simple()
> interface.
> 
> v2: Updated to pass in host_data pointer on irq_domain allocation.
> 
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Milton Miller <miltonm@bga.com>
> ---
>  arch/arm/mach-imx/mach-imx6q.c      |    3 ++-
>  arch/arm/mach-msm/board-msm8x60.c   |    8 ++------
>  arch/arm/mach-mx5/imx51-dt.c        |    4 ++--
>  arch/arm/mach-mx5/imx53-dt.c        |    4 ++--
>  arch/arm/mach-omap2/board-generic.c |    2 +-
>  arch/arm/mach-prima2/irq.c          |    2 +-
>  drivers/mfd/twl-core.c              |    2 +-
>  include/linux/irqdomain.h           |    1 -
>  kernel/irq/irqdomain.c              |   10 ++--------
>  9 files changed, 13 insertions(+), 23 deletions(-)
> 
...
> --- a/arch/arm/mach-mx5/imx51-dt.c
> +++ b/arch/arm/mach-mx5/imx51-dt.c
> @@ -47,7 +47,7 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
>  static int __init imx51_tzic_add_irq_domain(struct device_node *np,
>  				struct device_node *interrupt_parent)
>  {
> -	irq_domain_add_simple(np, 0);
> +	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
>  	return 0;
>  }
>  
> @@ -57,7 +57,7 @@ static int __init imx51_gpio_add_irq_domain(struct device_node *np,
>  	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
>  
>  	gpio_irq_base -= 32;
> -	irq_domain_add_simple(np, gpio_irq_base);
> +	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);

The tzic on imx5 gets 128 irq lines rather than 32 here.  The current
code will make any hwirq that is > 32 hit the WARN_ON below in
irq_domain_legacy_revmap().

	WARN_ON(hwirq < first_hwirq || hwirq >= first_hwirq + size)

The first_hwirq is 0 and size is 32 in this case.

Changing 32 to 128 seems fixing the problem.

>  
>  	return 0;
>  }
> diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
> index 05ebb3e..89de5d4 100644
> --- a/arch/arm/mach-mx5/imx53-dt.c
> +++ b/arch/arm/mach-mx5/imx53-dt.c
> @@ -51,7 +51,7 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
>  static int __init imx53_tzic_add_irq_domain(struct device_node *np,
>  				struct device_node *interrupt_parent)
>  {
> -	irq_domain_add_simple(np, 0);
> +	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);

Ditto

Regards,
Shawn

>  	return 0;
>  }
>  
> @@ -61,7 +61,7 @@ static int __init imx53_gpio_add_irq_domain(struct device_node *np,
>  	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
>  
>  	gpio_irq_base -= 32;
> -	irq_domain_add_simple(np, gpio_irq_base);
> +	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
>  
>  	return 0;
>  }
Rob Herring Jan. 31, 2012, 1:15 p.m. UTC | #2
Shawn,

On 01/31/2012 06:45 AM, Shawn Guo wrote:
> On Fri, Jan 27, 2012 at 02:36:08PM -0700, Grant Likely wrote:
>> irq_domain_add_simple() was a stop-gap measure until complete irq_domain
>> support was complete.  This patch removes the irq_domain_add_simple()
>> interface.
>>
>> v2: Updated to pass in host_data pointer on irq_domain allocation.
>>
>> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
>> Cc: Rob Herring <rob.herring@calxeda.com>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: Milton Miller <miltonm@bga.com>
>> ---
>>  arch/arm/mach-imx/mach-imx6q.c      |    3 ++-
>>  arch/arm/mach-msm/board-msm8x60.c   |    8 ++------
>>  arch/arm/mach-mx5/imx51-dt.c        |    4 ++--
>>  arch/arm/mach-mx5/imx53-dt.c        |    4 ++--
>>  arch/arm/mach-omap2/board-generic.c |    2 +-
>>  arch/arm/mach-prima2/irq.c          |    2 +-
>>  drivers/mfd/twl-core.c              |    2 +-
>>  include/linux/irqdomain.h           |    1 -
>>  kernel/irq/irqdomain.c              |   10 ++--------
>>  9 files changed, 13 insertions(+), 23 deletions(-)
>>
> ...
>> --- a/arch/arm/mach-mx5/imx51-dt.c
>> +++ b/arch/arm/mach-mx5/imx51-dt.c
>> @@ -47,7 +47,7 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
>>  static int __init imx51_tzic_add_irq_domain(struct device_node *np,
>>  				struct device_node *interrupt_parent)
>>  {
>> -	irq_domain_add_simple(np, 0);
>> +	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
>>  	return 0;
>>  }
>>  
>> @@ -57,7 +57,7 @@ static int __init imx51_gpio_add_irq_domain(struct device_node *np,
>>  	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
>>  
>>  	gpio_irq_base -= 32;
>> -	irq_domain_add_simple(np, gpio_irq_base);
>> +	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
> 
> The tzic on imx5 gets 128 irq lines rather than 32 here.  The current
> code will make any hwirq that is > 32 hit the WARN_ON below in
> irq_domain_legacy_revmap().

But this is the gpio controller code? Really this should be 4 domains,
but this temp fix is probably fine until you use my generic irq chip
support.

Rob

> 
> 	WARN_ON(hwirq < first_hwirq || hwirq >= first_hwirq + size)
> 
> The first_hwirq is 0 and size is 32 in this case.
> 
> Changing 32 to 128 seems fixing the problem.
>
Shawn Guo Jan. 31, 2012, 1:58 p.m. UTC | #3
On Tue, Jan 31, 2012 at 07:15:26AM -0600, Rob Herring wrote:
...
> >> --- a/arch/arm/mach-mx5/imx51-dt.c
> >> +++ b/arch/arm/mach-mx5/imx51-dt.c
> >> @@ -47,7 +47,7 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
> >>  static int __init imx51_tzic_add_irq_domain(struct device_node *np,
> >>  				struct device_node *interrupt_parent)
> >>  {
> >> -	irq_domain_add_simple(np, 0);
> >> +	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
> >>  	return 0;
> >>  }
> >>  
> >> @@ -57,7 +57,7 @@ static int __init imx51_gpio_add_irq_domain(struct device_node *np,
> >>  	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
> >>  
> >>  	gpio_irq_base -= 32;
> >> -	irq_domain_add_simple(np, gpio_irq_base);
> >> +	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
> > 
> > The tzic on imx5 gets 128 irq lines rather than 32 here.  The current
> > code will make any hwirq that is > 32 hit the WARN_ON below in
> > irq_domain_legacy_revmap().
> 
> But this is the gpio controller code? Really this should be 4 domains,
> but this temp fix is probably fine until you use my generic irq chip
> support.
> 
Sorry.  The comment was put at the wrong place.  It should be against
imx51_tzic_add_irq_domain() just above.
Grant Likely Feb. 1, 2012, 12:08 a.m. UTC | #4
On Tue, Jan 31, 2012 at 09:58:22PM +0800, Shawn Guo wrote:
> On Tue, Jan 31, 2012 at 07:15:26AM -0600, Rob Herring wrote:
> ...
> > >> --- a/arch/arm/mach-mx5/imx51-dt.c
> > >> +++ b/arch/arm/mach-mx5/imx51-dt.c
> > >> @@ -47,7 +47,7 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
> > >>  static int __init imx51_tzic_add_irq_domain(struct device_node *np,
> > >>  				struct device_node *interrupt_parent)
> > >>  {
> > >> -	irq_domain_add_simple(np, 0);
> > >> +	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
> > >>  	return 0;
> > >>  }
> > >>  
> > >> @@ -57,7 +57,7 @@ static int __init imx51_gpio_add_irq_domain(struct device_node *np,
> > >>  	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
> > >>  
> > >>  	gpio_irq_base -= 32;
> > >> -	irq_domain_add_simple(np, gpio_irq_base);
> > >> +	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
> > > 
> > > The tzic on imx5 gets 128 irq lines rather than 32 here.  The current
> > > code will make any hwirq that is > 32 hit the WARN_ON below in
> > > irq_domain_legacy_revmap().
> > 
> > But this is the gpio controller code? Really this should be 4 domains,
> > but this temp fix is probably fine until you use my generic irq chip
> > support.
> > 
> Sorry.  The comment was put at the wrong place.  It should be against
> imx51_tzic_add_irq_domain() just above.

I didn't know how large the bank was, so I just assumed 32.  If it should
be 128 then I'll change it.  Please confirm (or reply with a fixup patch)

g.
diff mbox

Patch

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index c257281..6075d4d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -97,7 +97,8 @@  static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
 	gpio_irq_base -= 32;
-	irq_domain_add_simple(np, gpio_irq_base);
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+			      NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 0a11342..962e711 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -80,12 +80,8 @@  static struct of_device_id msm_dt_gic_match[] __initdata = {
 
 static void __init msm8x60_dt_init(void)
 {
-	struct device_node *node;
-
-	node = of_find_matching_node_by_address(NULL, msm_dt_gic_match,
-			MSM8X60_QGIC_DIST_PHYS);
-	if (node)
-		irq_domain_add_simple(node, GIC_SPI_START);
+	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
+				GIC_SPI_START);
 
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
index e6bad17..e1b5edf 100644
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -47,7 +47,7 @@  static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
 static int __init imx51_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
 	return 0;
 }
 
@@ -57,7 +57,7 @@  static int __init imx51_gpio_add_irq_domain(struct device_node *np,
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
 	gpio_irq_base -= 32;
-	irq_domain_add_simple(np, gpio_irq_base);
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
index 05ebb3e..89de5d4 100644
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -51,7 +51,7 @@  static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
 static int __init imx53_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
 	return 0;
 }
 
@@ -61,7 +61,7 @@  static int __init imx53_gpio_add_irq_domain(struct device_node *np,
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
 	gpio_irq_base -= 32;
-	irq_domain_add_simple(np, gpio_irq_base);
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index d587560..00b1d02 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -67,7 +67,7 @@  static void __init omap_generic_init(void)
 {
 	struct device_node *node = of_find_matching_node(NULL, intc_match);
 	if (node)
-		irq_domain_add_simple(node, 0);
+		irq_domain_add_legacy(node, 32, 0, 0, &irq_domain_simple_ops, NULL);
 
 	omap_sdrc_init(NULL, NULL);
 
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index d93ceef..37c2de9 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -68,7 +68,7 @@  void __init sirfsoc_of_irq_init(void)
 	if (!sirfsoc_intc_base)
 		panic("unable to map intc cpu registers\n");
 
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
 
 	of_node_put(np);
 
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index aab236f..e63b408 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1224,7 +1224,7 @@  twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	pdata->irq_base = status;
 	pdata->irq_end = pdata->irq_base + nr_irqs;
 	irq_domain_add_legacy(node, nr_irqs, pdata->irq_base, 0,
-			      &irq_domain_simple_ops);
+			      &irq_domain_simple_ops, NULL);
 
 	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
 		dev_dbg(&client->dev, "can't talk I2C?\n");
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 624e9ac..e7379a3 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -164,7 +164,6 @@  extern unsigned int irq_linear_revmap(struct irq_domain *host,
 
 extern struct irq_domain_ops irq_domain_simple_ops;
 #if defined(CONFIG_OF_IRQ)
-extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
 extern void irq_domain_generate_simple(const struct of_device_id *match,
 					u64 phys_base, unsigned int irq_start);
 #else /* CONFIG_OF_IRQ */
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 8eff85c06..6627dc7 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -710,13 +710,6 @@  struct irq_domain_ops irq_domain_simple_ops = {
 EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
 
 #ifdef CONFIG_OF_IRQ
-void irq_domain_add_simple(struct device_node *controller, int irq_base)
-{
-	irq_domain_add_legacy(controller, 32, irq_base, 0,
-			      &irq_domain_simple_ops, NULL);
-}
-EXPORT_SYMBOL_GPL(irq_domain_add_simple);
-
 void irq_domain_generate_simple(const struct of_device_id *match,
 				u64 phys_base, unsigned int irq_start)
 {
@@ -725,7 +718,8 @@  void irq_domain_generate_simple(const struct of_device_id *match,
 		(unsigned long long) phys_base, (int) irq_start);
 	node = of_find_matching_node_by_address(NULL, match, phys_base);
 	if (node)
-		irq_domain_add_simple(node, irq_start);
+		irq_domain_add_legacy(node, 32, irq_start, 0,
+				      &irq_domain_simple_ops, NULL);
 }
 EXPORT_SYMBOL_GPL(irq_domain_generate_simple);
 #endif