| Message ID | 1328011649-14230-1-git-send-email-jason.hui@linaro.org |
|---|---|
| State | Accepted |
| Commit | 0d8a749950e9db6b9c82baa39e68302f69b71eb7 |
| Delegated to: | Stefano Babic |
| Headers | show |
On 1/31/12, Jason Liu <jason.hui@linaro.org> wrote: > FEC does not work on the i.mx51/53evk board, it will hangup > In: serial > Out: serial > Err: serial > Net: > > After bisect, it due to the following commit: > be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse > has change the imx_get_mac_from_fuse fucntion prototype, but fail > to update i.mx5, here it does it. > > After apply this patch, u-boot works again on i.mx51/53 evk boards. > > Signed-off-by: Jason Liu <jason.hui@linaro.org> > Cc: Stefano Babic <sbabic@denx.de> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
On 31/01/2012 13:07, Jason Liu wrote: > FEC does not work on the i.mx51/53evk board, it will hangup > In: serial > Out: serial > Err: serial > Net: > > After bisect, it due to the following commit: > be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse > has change the imx_get_mac_from_fuse fucntion prototype, but fail > to update i.mx5, here it does it. > > After apply this patch, u-boot works again on i.mx51/53 evk boards. > > Signed-off-by: Jason Liu <jason.hui@linaro.org> > Cc: Stefano Babic <sbabic@denx.de> > --- Acked-by: Stefano Babic <sbabic@denx.de> Thanks for fixing ! Best regards, Stefano Babic
On 31/01/2012 13:07, Jason Liu wrote: > FEC does not work on the i.mx51/53evk board, it will hangup > In: serial > Out: serial > Err: serial > Net: > Applied to u-boot-imx, thanks. Best regards, Stefano Babic
diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 1533dd8..3f5a4f7 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -72,7 +72,7 @@ u32 get_cpu_rev(void) } #if defined(CONFIG_FEC_MXC) -void imx_get_mac_from_fuse(unsigned char *mac) +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { int i; struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
FEC does not work on the i.mx51/53evk board, it will hangup In: serial Out: serial Err: serial Net: After bisect, it due to the following commit: be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse has change the imx_get_mac_from_fuse fucntion prototype, but fail to update i.mx5, here it does it. After apply this patch, u-boot works again on i.mx51/53 evk boards. Signed-off-by: Jason Liu <jason.hui@linaro.org> Cc: Stefano Babic <sbabic@denx.de> --- arch/arm/cpu/armv7/mx5/soc.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)