diff mbox

[3/3] e1000e: remove failed request for sw/fw/hw flag

Message ID 20080923224630.6927.28967.stgit@jtkirshe-mobile.jf.intel.com
State Accepted, archived
Delegated to: Jeff Garzik
Headers show

Commit Message

Kirsher, Jeffrey T Sept. 23, 2008, 10:46 p.m. UTC
From: Bruce Allan <bruce.w.allan@intel.com>

When the driver fails to acquire the control flag used to serialize
NVM and PHY accesses between the driver, firmware and hardware, remove the
request for the flag otherwise the hardware might grant the flag when it
becomes available but the driver will not release the flag.  This could
cause the firmware to prevent the driver getting the flag for all future
attempts.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/e1000e/ich8lan.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jeff Garzik Sept. 25, 2008, 12:51 a.m. UTC | #1
Jeff Kirsher wrote:
> From: Bruce Allan <bruce.w.allan@intel.com>
> 
> When the driver fails to acquire the control flag used to serialize
> NVM and PHY accesses between the driver, firmware and hardware, remove the
> request for the flag otherwise the hardware might grant the flag when it
> becomes available but the driver will not release the flag.  This could
> cause the firmware to prevent the driver getting the flag for all future
> attempts.
> 
> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
> 
>  drivers/net/e1000e/ich8lan.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)

applied


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jiri Kosina Sept. 25, 2008, 1 a.m. UTC | #2
On Wed, 24 Sep 2008, Jeff Garzik wrote:

> > When the driver fails to acquire the control flag used to serialize
> > NVM and PHY accesses between the driver, firmware and hardware, remove the
> > request for the flag otherwise the hardware might grant the flag when it
> > becomes available but the driver will not release the flag.  This could
> > cause the firmware to prevent the driver getting the flag for all future
> > attempts.
> applied

BTW are you going to take the whole series, or just this fix?

I don't think that the other patches should be really applied to upstream 
(they could be very handy for debugging this horrible issue, once we could 
do any debugging of it, thoug), as they don't protect against anyone 
creating a new rw mapping, which can then be freely used to still 
overwrite the mmio area without any problems.
Jeff Garzik Sept. 25, 2008, 1:29 a.m. UTC | #3
Jiri Kosina wrote:
> On Wed, 24 Sep 2008, Jeff Garzik wrote:
> 
>>> When the driver fails to acquire the control flag used to serialize
>>> NVM and PHY accesses between the driver, firmware and hardware, remove the
>>> request for the flag otherwise the hardware might grant the flag when it
>>> becomes available but the driver will not release the flag.  This could
>>> cause the firmware to prevent the driver getting the flag for all future
>>> attempts.
>> applied
> 
> BTW are you going to take the whole series, or just this fix?

Just this fix

	Jeff



--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index f47c60e..6b14ea8 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -409,6 +409,8 @@  static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 	if (!timeout) {
 		hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
 		return -E1000_ERR_CONFIG;
 	}