Message ID | a70e7ffc20a387aec47d845e5f642bf99564e1e3.1686829809.git.camelia.groza@nxp.com |
---|---|
State | Superseded |
Delegated to: | Peng Fan |
Headers | show |
Series | Enable DM_SERIAL for the LS104xA RDB/FRWY boards | expand |
On 6/15/2023 8:37 PM, Camelia Groza wrote: > Make sure the serial driver is initialized before relocation by tagging > the serial nodes with "bootph-all". Please add fsl-ls1043a-u-boot.dtsi for U-Boot specific changes. Regards, Peng. > > Signed-off-by: Camelia Groza <camelia.groza@nxp.com> > --- > arch/arm/dts/fsl-ls1043a.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi > index 21643a1d951f..79f67e7183c3 100644 > --- a/arch/arm/dts/fsl-ls1043a.dtsi > +++ b/arch/arm/dts/fsl-ls1043a.dtsi > @@ -227,6 +227,7 @@ > interrupts = <0 54 0x4>; > clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL > QORIQ_CLK_PLL_DIV(1)>; > + bootph-all; > }; > > duart1: serial@21c0600 { > @@ -235,6 +236,7 @@ > interrupts = <0 54 0x4>; > clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL > QORIQ_CLK_PLL_DIV(1)>; > + bootph-all; > }; > > duart2: serial@21d0500 { > @@ -243,6 +245,7 @@ > interrupts = <0 55 0x4>; > clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL > QORIQ_CLK_PLL_DIV(1)>; > + bootph-all; > }; > > duart3: serial@21d0600 { > @@ -251,6 +254,7 @@ > interrupts = <0 55 0x4>; > clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL > QORIQ_CLK_PLL_DIV(1)>; > + bootph-all; > }; > > lpuart0: serial@2950000 { > -- > 2.17.1 >
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi index 21643a1d951f..79f67e7183c3 100644 --- a/arch/arm/dts/fsl-ls1043a.dtsi +++ b/arch/arm/dts/fsl-ls1043a.dtsi @@ -227,6 +227,7 @@ interrupts = <0 54 0x4>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + bootph-all; }; duart1: serial@21c0600 { @@ -235,6 +236,7 @@ interrupts = <0 54 0x4>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + bootph-all; }; duart2: serial@21d0500 { @@ -243,6 +245,7 @@ interrupts = <0 55 0x4>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + bootph-all; }; duart3: serial@21d0600 { @@ -251,6 +254,7 @@ interrupts = <0 55 0x4>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + bootph-all; }; lpuart0: serial@2950000 {
Make sure the serial driver is initialized before relocation by tagging the serial nodes with "bootph-all". Signed-off-by: Camelia Groza <camelia.groza@nxp.com> --- arch/arm/dts/fsl-ls1043a.dtsi | 4 ++++ 1 file changed, 4 insertions(+) -- 2.17.1