Message ID | 20230516150202.188655-1-krzysztof.kozlowski@linaro.org |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550 | expand |
On Tue, May 16, 2023 at 05:02:00PM +0200, Krzysztof Kozlowski wrote: > Document compatible for PM8550 Torch and Flash LED controller. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor.
On 16.05.2023 17:02, Krzysztof Kozlowski wrote: > Add node for PM8550 PMIC flash LED controller. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/pm8550.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi > index 46396ec1a330..33f357a80636 100644 > --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi > @@ -55,5 +55,11 @@ pm8550_gpios: gpio@8800 { > interrupt-controller; > #interrupt-cells = <2>; > }; > + > + pm8550_flash: led-controller@ee00 { > + compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; > + reg = <0xee00>; > + status = "disabled"; > + }; > }; > };
On 16.05.2023 17:02, Krzysztof Kozlowski wrote: > Enable PM8550 PMIC flash LED controller and add two flash LEDs using > four current outputs. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Context in the patch depends on: > https://lore.kernel.org/linux-arm-msm/20230516133011.108093-1-krzysztof.kozlowski@linaro.org/T/#t > --- > arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts > index 88b7d3ecdbc9..30b36a149125 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts > +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts > @@ -5,6 +5,7 @@ > > /dts-v1/; > > +#include <dt-bindings/leds/common.h> > #include <dt-bindings/regulator/qcom,rpmh-regulator.h> > #include "sm8550.dtsi" > #include "pm8010.dtsi" > @@ -451,6 +452,30 @@ &pcie0_phy { > status = "okay"; > }; > > +&pm8550_flash { > + status = "okay"; > + > + led-0 { > + function = LED_FUNCTION_FLASH; > + color = <LED_COLOR_ID_YELLOW>; > + led-sources = <1>, <4>; > + led-max-microamp = <500000>; > + flash-max-microamp = <2000000>; That's some serious LEDs! Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > + flash-max-timeout-us = <1280000>; > + function-enumerator = <0>; > + }; > + > + led-1 { > + function = LED_FUNCTION_FLASH; > + color = <LED_COLOR_ID_WHITE>; > + led-sources = <2>, <3>; > + led-max-microamp = <500000>; > + flash-max-microamp = <2000000>; > + flash-max-timeout-us = <1280000>; > + function-enumerator = <1>; > + }; > +}; > + > &pm8550b_eusb2_repeater { > vdd18-supply = <&vreg_l15b_1p8>; > vdd3-supply = <&vreg_l5b_3p1>;
On 16.05.2023 17:02, Krzysztof Kozlowski wrote: > Document compatible for PM8550 Torch and Flash LED controller. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > index ffacf703d9f9..074ef7e63c49 100644 > --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > @@ -26,6 +26,7 @@ properties: > - qcom,pm8150c-flash-led > - qcom,pm8150l-flash-led > - qcom,pm8350c-flash-led > + - qcom,pm8550-flash-led > - const: qcom,spmi-flash-led > > reg:
On Wed, 17 May 2023, Konrad Dybcio wrote: > > > On 16.05.2023 17:02, Krzysztof Kozlowski wrote: > > Document compatible for PM8550 Torch and Flash LED controller. > > > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> This should be a Reviewed-by. Other maintainers might get confused by this and apply the patch via their own repositories which I'm assuming was not the intention. > > Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > > index ffacf703d9f9..074ef7e63c49 100644 > > --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > > +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml > > @@ -26,6 +26,7 @@ properties: > > - qcom,pm8150c-flash-led > > - qcom,pm8150l-flash-led > > - qcom,pm8350c-flash-led > > + - qcom,pm8550-flash-led > > - const: qcom,spmi-flash-led > > > > reg:
On Tue, 16 May 2023 17:02:00 +0200, Krzysztof Kozlowski wrote: > Document compatible for PM8550 Torch and Flash LED controller. > > Applied, thanks! [2/3] arm64: dts: qcom: pm8550: add flash LED controller commit: cf51d2be057b19f2ef72233788c3211f0781678d [3/3] arm64: dts: qcom: sm8550-qrd: add flash LEDs commit: a158f00cdf68852850df231526ce0df0bb7dc1b4 Best regards,
On Tue, 16 May 2023, Krzysztof Kozlowski wrote: > Document compatible for PM8550 Torch and Flash LED controller. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml | 1 + > 1 file changed, 1 insertion(+) Applied, thanks
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml index ffacf703d9f9..074ef7e63c49 100644 --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -26,6 +26,7 @@ properties: - qcom,pm8150c-flash-led - qcom,pm8150l-flash-led - qcom,pm8350c-flash-led + - qcom,pm8550-flash-led - const: qcom,spmi-flash-led reg:
Document compatible for PM8550 Torch and Flash LED controller. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml | 1 + 1 file changed, 1 insertion(+)