@@ -106,7 +106,6 @@ MODULE_LICENSE("GPL");
*/
static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
static int pmz_ports_count;
-static DEFINE_MUTEX(pmz_irq_mutex);
static struct uart_driver pmz_uart_reg = {
.owner = THIS_MODULE,
@@ -126,9 +125,6 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
{
int i;
- if (ZS_IS_ASLEEP(uap))
- return;
-
/* Let pending transmits finish. */
for (i = 0; i < 1000; i++) {
unsigned char stat = read_zsreg(uap, R1);
@@ -234,26 +230,6 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
unsigned char ch, r1, drop, error, flag;
int loops = 0;
- /* The interrupt can be enabled when the port isn't open, typically
- * that happens when using one port is open and the other closed (stale
- * interrupt) or when one port is used as a console.
- */
- if (!ZS_IS_OPEN(uap)) {
- pmz_debug("pmz: draining input\n");
- /* Port is closed, drain input data */
- for (;;) {
- if ((++loops) > 1000)
- goto flood;
- (void)read_zsreg(uap, R1);
- write_zsreg(uap, R0, ERR_RES);
- (void)read_zsdata(uap);
- ch = read_zsreg(uap, R0);
- if (!(ch & Rx_CH_AV))
- break;
- }
- return NULL;
- }
-
/* Sanity check, make sure the old bug is no longer happening */
if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
WARN_ON(1);
@@ -393,8 +369,6 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
{
struct circ_buf *xmit;
- if (ZS_IS_ASLEEP(uap))
- return;
if (ZS_IS_CONS(uap)) {
unsigned char status = read_zsreg(uap, R0);
@@ -485,12 +459,16 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
spin_lock(&uap_a->port.lock);
r3 = read_zsreg(uap_a, R3);
-#ifdef DEBUG_HARD
+#ifde DEBUG_HARD
pmz_debug("irq, r3: %x\n", r3);
#endif
/* Channel A */
tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ if (!ZS_IS_OPEN(uap_a)) {
+ pmz_debug("ChanA interrupt while open !\n");
+ goto skip_a;
+ }
write_zsreg(uap_a, R0, RES_H_IUS);
zssync(uap_a);
if (r3 & CHAEXT)
@@ -501,16 +479,21 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
pmz_transmit_chars(uap_a);
rc = IRQ_HANDLED;
}
+ skip_a:
spin_unlock(&uap_a->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
- if (uap_b->node == NULL)
+ if (!uap_b)
goto out;
spin_lock(&uap_b->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+ if (!ZS_IS_OPEN(uap_a)) {
+ pmz_debug("ChanB interrupt while open !\n");
+ goto skip_b;
+ }
write_zsreg(uap_b, R0, RES_H_IUS);
zssync(uap_b);
if (r3 & CHBEXT)
@@ -521,14 +504,12 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
pmz_transmit_chars(uap_b);
rc = IRQ_HANDLED;
}
+ skip_b:
spin_unlock(&uap_b->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
out:
-#ifdef DEBUG_HARD
- pmz_debug("irq done.\n");
-#endif
return rc;
}
@@ -553,12 +534,8 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
*/
static unsigned int pmz_tx_empty(struct uart_port *port)
{
- struct uart_pmac_port *uap = to_pmz(port);
unsigned char status;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return TIOCSER_TEMT;
-
status = pmz_peek_status(to_pmz(port));
if (status & Tx_BUF_EMP)
return TIOCSER_TEMT;
@@ -580,8 +557,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (ZS_IS_IRDA(uap))
return;
/* We get called during boot with a port not up yet */
- if (ZS_IS_ASLEEP(uap) ||
- !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
+ if (!(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
return;
set_bits = clear_bits = 0;
@@ -600,8 +576,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
/* NOTE: Not subject to 'transmitter active' rule. */
uap->curregs[R5] |= set_bits;
uap->curregs[R5] &= ~clear_bits;
- if (ZS_IS_ASLEEP(uap))
- return;
+
write_zsreg(uap, R5, uap->curregs[R5]);
pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n",
set_bits, clear_bits, uap->curregs[R5]);
@@ -619,9 +594,6 @@ static unsigned int pmz_get_mctrl(struct uart_port *port)
unsigned char status;
unsigned int ret;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return 0;
-
status = read_zsreg(uap, R0);
ret = 0;
@@ -659,9 +631,6 @@ static void pmz_start_tx(struct uart_port *port)
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return;
-
status = read_zsreg(uap, R0);
/* TX busy? Just wait for the TX done interrupt. */
@@ -700,9 +669,6 @@ static void pmz_stop_rx(struct uart_port *port)
{
struct uart_pmac_port *uap = to_pmz(port);
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return;
-
pmz_debug("pmz: stop_rx()()\n");
/* Disable all RX interrupts. */
@@ -721,14 +687,12 @@ static void pmz_enable_ms(struct uart_port *port)
struct uart_pmac_port *uap = to_pmz(port);
unsigned char new_reg;
- if (ZS_IS_IRDA(uap) || uap->node == NULL)
+ if (ZS_IS_IRDA(uap))
return;
new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
if (new_reg != uap->curregs[R15]) {
uap->curregs[R15] = new_reg;
- if (ZS_IS_ASLEEP(uap))
- return;
/* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(uap, R15, uap->curregs[R15]);
}
@@ -744,8 +708,6 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
unsigned char set_bits, clear_bits, new_reg;
unsigned long flags;
- if (uap->node == NULL)
- return;
set_bits = clear_bits = 0;
if (break_state)
@@ -758,12 +720,6 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
if (new_reg != uap->curregs[R5]) {
uap->curregs[R5] = new_reg;
-
- /* NOTE: Not subject to 'transmitter active' rule. */
- if (ZS_IS_ASLEEP(uap)) {
- spin_unlock_irqrestore(&port->lock, flags);
- return;
- }
write_zsreg(uap, R5, uap->curregs[R5]);
}
@@ -937,14 +893,21 @@ static int __pmz_startup(struct uart_pmac_port *uap)
static void pmz_irda_reset(struct uart_pmac_port *uap)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&uap->port.lock, flags);
uap->curregs[R5] |= DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(110);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ msleep(110);
+
+ spin_lock_irqsave(&uap->port.lock, flags);
uap->curregs[R5] &= ~DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(10);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ msleep(10);
}
/*
@@ -959,13 +922,6 @@ static int pmz_startup(struct uart_port *port)
pmz_debug("pmz: startup()\n");
- if (ZS_IS_ASLEEP(uap))
- return -EAGAIN;
- if (uap->node == NULL)
- return -ENODEV;
-
- mutex_lock(&pmz_irq_mutex);
-
uap->flags |= PMACZILOG_FLAG_IS_OPEN;
/* A console is never powered down. Else, power up and
@@ -976,18 +932,14 @@ static int pmz_startup(struct uart_port *port)
pwr_delay = __pmz_startup(uap);
spin_unlock_irqrestore(&port->lock, flags);
}
-
- pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
+ sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line);
if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
- "SCC", uap)) {
+ uap->irq_name, uap)) {
pmz_error("Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
- mutex_unlock(&pmz_irq_mutex);
return -ENXIO;
}
- mutex_unlock(&pmz_irq_mutex);
-
/* Right now, we deal with delay by blocking here, I'll be
* smarter later on
*/
@@ -1017,26 +969,19 @@ static void pmz_shutdown(struct uart_port *port)
pmz_debug("pmz: shutdown()\n");
- if (uap->node == NULL)
- return;
-
- mutex_lock(&pmz_irq_mutex);
-
spin_lock_irqsave(&port->lock, flags);
- if (!ZS_IS_ASLEEP(uap)) {
- /* Disable interrupt requests for the channel */
- pmz_interrupt_control(uap, 0);
+ /* Disable interrupt requests for the channel */
+ pmz_interrupt_control(uap, 0);
- if (!ZS_IS_CONS(uap)) {
- /* Disable receiver and transmitter */
- uap->curregs[R3] &= ~RxENABLE;
- uap->curregs[R5] &= ~TxENABLE;
+ if (!ZS_IS_CONS(uap)) {
+ /* Disable receiver and transmitter */
+ uap->curregs[R3] &= ~RxENABLE;
+ uap->curregs[R5] &= ~TxENABLE;
- /* Disable break assertion */
- uap->curregs[R5] &= ~SND_BRK;
- pmz_maybe_update_regs(uap);
- }
+ /* Disable break assertion */
+ uap->curregs[R5] &= ~SND_BRK;
+ pmz_maybe_update_regs(uap);
}
spin_unlock_irqrestore(&port->lock, flags);
@@ -1048,16 +993,11 @@ static void pmz_shutdown(struct uart_port *port)
uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
- if (!ZS_IS_OPEN(uap->mate))
- pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
-
- if (!ZS_IS_ASLEEP(uap) && !ZS_IS_CONS(uap))
+ if (!ZS_IS_CONS(uap))
pmz_set_scc_power(uap, 0); /* Shut the chip down */
spin_unlock_irqrestore(&port->lock, flags);
- mutex_unlock(&pmz_irq_mutex);
-
pmz_debug("pmz: shutdown() done.\n");
}
@@ -1305,9 +1245,6 @@ static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
pmz_debug("pmz: set_termios()\n");
- if (ZS_IS_ASLEEP(uap))
- return;
-
memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
/* XXX Check which revs of machines actually allow 1 and 4Mb speeds
@@ -1605,25 +1542,34 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
*/
static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
+ struct uart_pmac_port *uap;
int i;
/* Iterate the pmz_ports array to find a matching entry
*/
for (i = 0; i < MAX_ZS_PORTS; i++)
- if (pmz_ports[i].node == mdev->ofdev.dev.of_node) {
- struct uart_pmac_port *uap = &pmz_ports[i];
-
- uap->dev = mdev;
- dev_set_drvdata(&mdev->ofdev.dev, uap);
- if (macio_request_resources(uap->dev, "pmac_zilog"))
- printk(KERN_WARNING "%s: Failed to request resource"
- ", port still active\n",
- uap->node->name);
- else
- uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
- return 0;
- }
- return -ENODEV;
+ if (pmz_ports[i].node == mdev->ofdev.dev.of_node)
+ break;
+ if (i >= MAX_ZS_PORTS)
+ return -ENODEV;
+
+
+ uap = &pmz_ports[i];
+ uap->dev = mdev;
+ uap->port.dev = &mdev->ofdev.dev;
+ dev_set_drvdata(&mdev->ofdev.dev, uap);
+
+ /* We still activate the port even when failing to request resources
+ * to work around bugs in ancient Apple device-trees
+ */
+ if (macio_request_resources(uap->dev, "pmac_zilog"))
+ printk(KERN_WARNING "%s: Failed to request resource"
+ ", port still active\n",
+ uap->node->name);
+ else
+ uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
+
+ return uart_add_one_port(&pmz_uart_reg, &uap->port);
}
/*
@@ -1637,12 +1583,15 @@ static int pmz_detach(struct macio_dev *mdev)
if (!uap)
return -ENODEV;
+ uart_remove_one_port(&pmz_uart_reg, &uap->port);
+
if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) {
macio_release_resources(uap->dev);
uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED;
}
dev_set_drvdata(&mdev->ofdev.dev, NULL);
uap->dev = NULL;
+ uap->port.dev = NULL;
return 0;
}
@@ -1651,62 +1600,13 @@ static int pmz_detach(struct macio_dev *mdev)
static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
- struct uart_state *state;
- unsigned long flags;
if (uap == NULL) {
printk("HRM... pmz_suspend with NULL uap\n");
return 0;
}
- if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
- return 0;
-
- pmz_debug("suspend, switching to state %d\n", pm_state.event);
-
- state = pmz_uart_reg.state + uap->port.line;
-
- mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->port.mutex);
-
- spin_lock_irqsave(&uap->port.lock, flags);
-
- if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) {
- /* Disable interrupt requests for the channel */
- pmz_interrupt_control(uap, 0);
-
- /* Disable receiver and transmitter */
- uap->curregs[R3] &= ~RxENABLE;
- uap->curregs[R5] &= ~TxENABLE;
-
- /* Disable break assertion */
- uap->curregs[R5] &= ~SND_BRK;
- pmz_load_zsregs(uap, uap->curregs);
-
- uap->flags |= PMACZILOG_FLAG_IS_ASLEEP;
- mb();
- }
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
-
- if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate))
- if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
- pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
- disable_irq(uap->port.irq);
- }
-
- if (ZS_IS_CONS(uap))
- uap->port.cons->flags &= ~CON_ENABLED;
-
- /* Shut the chip down */
- pmz_set_scc_power(uap, 0);
-
- mutex_unlock(&state->port.mutex);
- mutex_unlock(&pmz_irq_mutex);
-
- pmz_debug("suspend, switching complete\n");
-
- mdev->ofdev.dev.power.power_state = pm_state;
+ uart_suspend_port(&pmz_uart_reg, &uap->port);
return 0;
}
@@ -1715,74 +1615,20 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
static int pmz_resume(struct macio_dev *mdev)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
- struct uart_state *state;
- unsigned long flags;
- int pwr_delay = 0;
if (uap == NULL)
return 0;
- if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
- pmz_debug("resume, switching to state 0\n");
-
- state = pmz_uart_reg.state + uap->port.line;
-
- mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->port.mutex);
-
- spin_lock_irqsave(&uap->port.lock, flags);
- if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
- spin_unlock_irqrestore(&uap->port.lock, flags);
- goto bail;
- }
- pwr_delay = __pmz_startup(uap);
-
- /* Take care of config that may have changed while asleep */
- __pmz_set_termios(&uap->port, &uap->termios_cache, NULL);
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
-
- if (ZS_IS_CONS(uap))
- uap->port.cons->flags |= CON_ENABLED;
-
- /* Re-enable IRQ on the controller */
- if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
- pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- enable_irq(uap->port.irq);
- }
-
- if (ZS_IS_OPEN(uap)) {
- spin_lock_irqsave(&uap->port.lock, flags);
- pmz_interrupt_control(uap, 1);
- spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-
- bail:
- mutex_unlock(&state->port.mutex);
- mutex_unlock(&pmz_irq_mutex);
-
- /* Right now, we deal with delay by blocking here, I'll be
- * smarter later on
- */
- if (pwr_delay != 0) {
- pmz_debug("pmz: delaying %d ms\n", pwr_delay);
- msleep(pwr_delay);
- }
-
- pmz_debug("resume, switching complete\n");
-
- mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
+ uart_resume_port(&pmz_uart_reg, &uap->port);
return 0;
}
/*
* Probe all ports in the system and build the ports array, we register
- * with the serial layer at this point, the macio-type probing is only
- * used later to "attach" to the sysfs tree so we get power management
- * events
+ * with the serial layer later, so we get a proper struct device which
+ * allows the tty to attach properly. This is later than it used to be
+ * but the tty layer really wants it that way.
*/
static int __init pmz_probe(void)
{
@@ -1818,8 +1664,10 @@ static int __init pmz_probe(void)
/*
* Fill basic fields in the port structures
*/
- pmz_ports[count].mate = &pmz_ports[count+1];
- pmz_ports[count+1].mate = &pmz_ports[count];
+ if (node_b != NULL) {
+ pmz_ports[count].mate = &pmz_ports[count+1];
+ pmz_ports[count+1].mate = &pmz_ports[count];
+ }
pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
pmz_ports[count].node = node_a;
pmz_ports[count+1].node = node_b;
@@ -1887,19 +1735,19 @@ static int __init pmz_probe(void)
pmz_ports_count = 0;
- pmz_ports[0].mate = &pmz_ports[1];
pmz_ports[0].port.line = 0;
pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
- pmz_ports[0].node = &scc_a_pdev;
+ pmz_ports[0].pdev = &scc_a_pdev;
err = pmz_init_port(&pmz_ports[0]);
if (err)
return err;
pmz_ports_count++;
+ pmz_ports[0].mate = &pmz_ports[1];
pmz_ports[1].mate = &pmz_ports[0];
pmz_ports[1].port.line = 1;
pmz_ports[1].flags = 0;
- pmz_ports[1].node = &scc_b_pdev;
+ pmz_ports[1].pdev = &scc_b_pdev;
err = pmz_init_port(&pmz_ports[1]);
if (err)
return err;
@@ -1918,13 +1766,22 @@ static int __init pmz_attach(struct platform_device *pdev)
int i;
for (i = 0; i < pmz_ports_count; i++)
- if (pmz_ports[i].node == pdev)
- return 0;
- return -ENODEV;
+ if (pmz_ports[i].pdev == pdev)
+ break;
+ if (i >= pmz_ports_count)
+ return -ENODEV;
+
+ uap = &pmz_ports[i];
+ uap->port.dev = &pdev->dev;
+ dev_set_drvdata(&mdev->ofdev.dev, uap);
+
+ return uart_add_one_port(&pmz_uart_reg,
+ &pmz_ports[i]->port);
}
static int __exit pmz_detach(struct platform_device *pdev)
{
+ uart_remove_one_port(&pmz_uart_reg, &uap->port);
return 0;
}
@@ -1956,38 +1813,13 @@ static struct console pmz_console = {
*/
static int __init pmz_register(void)
{
- int i, rc;
-
pmz_uart_reg.nr = pmz_ports_count;
pmz_uart_reg.cons = PMACZILOG_CONSOLE;
/*
* Register this driver with the serial core
*/
- rc = uart_register_driver(&pmz_uart_reg);
- if (rc)
- return rc;
-
- /*
- * Register each port with the serial core
- */
- for (i = 0; i < pmz_ports_count; i++) {
- struct uart_pmac_port *uport = &pmz_ports[i];
- /* NULL node may happen on wallstreet */
- if (uport->node != NULL)
- rc = uart_add_one_port(&pmz_uart_reg, &uport->port);
- if (rc)
- goto err_out;
- }
-
- return 0;
-err_out:
- while (i-- > 0) {
- struct uart_pmac_port *uport = &pmz_ports[i];
- uart_remove_one_port(&pmz_uart_reg, &uport->port);
- }
- uart_unregister_driver(&pmz_uart_reg);
- return rc;
+ return uart_register_driver(&pmz_uart_reg);
}
#ifdef CONFIG_PPC_PMAC
@@ -2086,10 +1918,8 @@ static void __exit exit_pmz(void)
for (i = 0; i < pmz_ports_count; i++) {
struct uart_pmac_port *uport = &pmz_ports[i];
- if (uport->node != NULL) {
- uart_remove_one_port(&pmz_uart_reg, &uport->port);
+ if (uport->node != NULL)
pmz_dispose_port(uport);
- }
}
/* Unregister UART driver */
uart_unregister_driver(&pmz_uart_reg);
@@ -2116,8 +1946,6 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
struct uart_pmac_port *uap = &pmz_ports[con->index];
unsigned long flags;
- if (ZS_IS_ASLEEP(uap))
- return;
spin_lock_irqsave(&uap->port.lock, flags);
/* Turn of interrupts and enable the transmitter. */
@@ -2162,8 +1990,10 @@ static int __init pmz_console_setup(struct console *co, char *options)
if (co->index >= pmz_ports_count)
co->index = 0;
uap = &pmz_ports[co->index];
+#ifdef CONFIG_PPC_PMAC
if (uap->node == NULL)
return -ENODEV;
+#endif
port = &uap->port;
/*
@@ -2,9 +2,12 @@
#define __PMAC_ZILOG_H__
#ifdef CONFIG_PPC_PMAC
-#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
+/* We cannot use dev_* because this can be called early, way before
+ * we are matched with a device (when using it as a kernel console)
+ */
+#define pmz_debug(fmt, arg...) pr_debug("ttyPZ%d: " fmt, uap->port.line, ## arg)
+#define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg)
+#define pmz_info(fmt, arg...) pr_info("ttyPZ%d: " fmt, uap->port.line, ## arg)
#else
#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg)
#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg)
@@ -35,7 +38,7 @@ struct uart_pmac_port {
*/
struct device_node *node;
#else
- struct platform_device *node;
+ struct platform_device *pdev;
#endif
/* Port type as obtained from device tree (IRDA, modem, ...) */
@@ -50,14 +53,11 @@ struct uart_pmac_port {
#define PMACZILOG_FLAG_REGS_HELD 0x00000010
#define PMACZILOG_FLAG_TX_STOPPED 0x00000020
#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040
-#define PMACZILOG_FLAG_ENABLED 0x00000080
#define PMACZILOG_FLAG_IS_IRDA 0x00000100
#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200
#define PMACZILOG_FLAG_HAS_DMA 0x00000400
#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800
-#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000
#define PMACZILOG_FLAG_IS_OPEN 0x00002000
-#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000
#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000
#define PMACZILOG_FLAG_BREAK 0x00010000
@@ -74,6 +74,8 @@ struct uart_pmac_port {
volatile struct dbdma_regs __iomem *rx_dma_regs;
#endif
+ unsigned char irq_name[8];
+
struct ktermios termios_cache;
};
@@ -388,9 +390,7 @@ static inline void zssync(struct uart_pmac_port *port)
#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
-#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
-#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
#endif /* __PMAC_ZILOG_H__ */