| Message ID | 20111206224439.GG23686@thinkpad-t410 |
|---|---|
| State | New |
| Headers | show |
On Tue, Dec 06, 2011 at 04:44:39PM -0600, Seth Forshee wrote: > BugLink: http://bugs.launchpad.net/bugs/614238 > > These patches address a long-standing problem that causes VGA output > problems on some machines. These patches went into Linus's tree during > the 3.2 merge window, but I've been sitting on them a while as all > previous attempts to fix the problem had to be reverted due to > regressions on other hardware. Things are looking better this time > around, so please consider these backports for oneiric. > > == SRU Justification == > > Impact: On some machines with an Ibex Peak PCH, SSC will be enabled on > the clock source used for analog outputs. This results in poor quality > output (described as "wavy") on the external display. > > Fix: A series of upstream backports to the i915 driver. With these > backports, the driver will check for the existence of a CK505 clock > source, and if present this is used as the reference clock for analog > outputs so that SSC can remain enabled. Otherwise SSC is disabled. The > PCH refclk update code is also split out so that it can be called from > additional locations where the refclks should be updated. > > Test Case: Running with backports on an affected system will fix quality > issues on VGA outputs. Verified for oneiric on LP #614238. > > > The following changes since commit 9b17787b269086b6556df3ff25f1421a5111131c: > > UBUNTU: Ubuntu-3.0.0-14.23 (2011-11-21 15:59:26 -0200) > > are available in the git repository at: > git://kernel.ubuntu.com/sforshee/ubuntu-oneiric.git lp614238 > > Jesse Barnes (1): > drm/i915: split out PCH refclk update code > > Keith Packard (7): > drv/i915: Pull display_clock_mode out of VBT table > drm/i915: Document a few more BDB_GENERAL_FEATURES bits from PCH BIOS > drm/i915: Allow SSC parameter to override VBT value > drm/i915: Fix PCH SSC reference clock settings > drm/i915: Use CK505 as non-SSC source where available > drm/i915: All PCH refclks are 120MHz > drm/i915: Initialize PCH refclks at modeset init time > > Thomas Jarosch (1): > drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked > > drivers/gpu/drm/i915/i915_drv.c | 8 ++- > drivers/gpu/drm/i915/i915_drv.h | 2 + > drivers/gpu/drm/i915/intel_bios.c | 7 ++ > drivers/gpu/drm/i915/intel_bios.h | 9 ++- > drivers/gpu/drm/i915/intel_display.c | 183 +++++++++++++++++++++++---------- > 5 files changed, 150 insertions(+), 59 deletions(-) The backport looks ok. It seems cherry-picking the simple "drm/i915: Use DRM_DEBUG_KMS for all messages in intel_bios.c", belonging to the same series, would allow cherry-picking cleanly abd06860185fc613776adae792772e076d77caf2, wouldn't change the end result anyway. And looks like a bug with a lot of "heat", so: Acked-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
On 12/06/2011 03:44 PM, Seth Forshee wrote:
> git://kernel.ubuntu.com/sforshee/ubuntu-oneiric.git lp614238
I took Herton's suggestion of a clean cherry-pick for
562396b9e46bcb34cc18f513fea1c4764d8ea06d in order to avoid one of the
backported patches (simple as it was).
I guess we'd better get some regression testing on this set.
rtg
BugLink: http://bugs.launchpad.net/bugs/614238 These patches address a long-standing problem that causes VGA output problems on some machines. These patches went into Linus's tree during the 3.2 merge window, but I've been sitting on them a while as all previous attempts to fix the problem had to be reverted due to regressions on other hardware. Things are looking better this time around, so please consider these backports for oneiric. == SRU Justification == Impact: On some machines with an Ibex Peak PCH, SSC will be enabled on the clock source used for analog outputs. This results in poor quality output (described as "wavy") on the external display. Fix: A series of upstream backports to the i915 driver. With these backports, the driver will check for the existence of a CK505 clock source, and if present this is used as the reference clock for analog outputs so that SSC can remain enabled. Otherwise SSC is disabled. The PCH refclk update code is also split out so that it can be called from additional locations where the refclks should be updated. Test Case: Running with backports on an affected system will fix quality issues on VGA outputs. Verified for oneiric on LP #614238. The following changes since commit 9b17787b269086b6556df3ff25f1421a5111131c: UBUNTU: Ubuntu-3.0.0-14.23 (2011-11-21 15:59:26 -0200) are available in the git repository at: git://kernel.ubuntu.com/sforshee/ubuntu-oneiric.git lp614238 Jesse Barnes (1): drm/i915: split out PCH refclk update code Keith Packard (7): drv/i915: Pull display_clock_mode out of VBT table drm/i915: Document a few more BDB_GENERAL_FEATURES bits from PCH BIOS drm/i915: Allow SSC parameter to override VBT value drm/i915: Fix PCH SSC reference clock settings drm/i915: Use CK505 as non-SSC source where available drm/i915: All PCH refclks are 120MHz drm/i915: Initialize PCH refclks at modeset init time Thomas Jarosch (1): drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked drivers/gpu/drm/i915/i915_drv.c | 8 ++- drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/intel_bios.c | 7 ++ drivers/gpu/drm/i915/intel_bios.h | 9 ++- drivers/gpu/drm/i915/intel_display.c | 183 +++++++++++++++++++++++---------- 5 files changed, 150 insertions(+), 59 deletions(-)