powerpc/40x: Add APM8018X SOC support

Message ID	1322041464-20605-1-git-send-email-tinamdar@apm.com (mailing list archive)
State	Changes Requested
Headers	show Return-Path: <linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org> From: Tanmay Inamdar <tinamdar@apm.com> To: jwboyer@gmail.com Subject: [PATCH] powerpc/40x: Add APM8018X SOC support Date: Wed, 23 Nov 2011 15:14:24 +0530 Message-Id: <1322041464-20605-1-git-send-email-tinamdar@apm.com> Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, Tanmay Inamdar <tinamdar@apm.com> Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org Sender: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org

Hello Josh, Thanks for the review. The comments are appreciated. Please see my inline replies. Thanks, Tanmay On Wed, Nov 23, 2011 at 7:40 PM, Josh Boyer <jwboyer@gmail.com> wrote: > On Wed, Nov 23, 2011 at 4:44 AM, Tanmay Inamdar <tinamdar@apm.com> wrote: > > > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > index b177caa..3f2cc36 100644 > > --- a/arch/powerpc/Kconfig > > +++ b/arch/powerpc/Kconfig > > @@ -978,3 +978,9 @@ config PPC_LIB_RHEAP > > bool > > > > source "arch/powerpc/kvm/Kconfig" > > + > > +config UART_16550_WORD_ADDRESSABLE > > + bool > > + default n > > + help > > + Enable this if your UART 16550 is word addressable. > > Ugh. What is this for? More specifically, if the UART requires word > reads and writes, shouldn't it be using reg-shift/reg-offset in the > device tree? I'm confused why UDBG would need this sort of code, but > the runtime serial driver doesn't? > It seems the name 'UART_16550_WORD_ADDRESSABLE' is confusing here. The UART has been modeled after the industry-standard 16550. However, the register address space has been relocated to 32-bit data boundaries. For each register, only 1st bit is valid and rest 3 bits are just reserved and read as zero. Hence we need to pack the structure accordingly. runtime serial driver also needs changes in register definitions. However it is not included in this patch. In the next version of patch, I will remove UART stuff. I will make separate patch for UART. > > > diff --git a/arch/powerpc/boot/dts/klondike.dts > b/arch/powerpc/boot/dts/klondike.dts > > > > + OCM: ocm@20000000 { > > + compatible = "ibm,ocm"; > > + status = "enabled"; > > + cell-index = <1>; > > + reg = < 0x20000000 0x1f000 /* 128K - 4K NAND */ > > + 0xfffe0000 0x1f000>; /* 128K - 4K I2C */ > > + bootmode = "nand"; > > + }; > > What is this? There's nothing in the kernel or in this patch that > binds with "ibm,ocm". Also, that 'bootmode' property doesn't seem > like a hardware value, but a human descriptor of something that > switches it to boot from NAND. > > OCM driver is not yet submitted. I will skip the blocks in the dts which are still not supported in the next version. You are right about bootmode. OCM gets mapped to different addresses in different boot modes. Uboot takes care of updating this parameter. > > > + crypto: crypto@40000000 { > > + device_type = "crypto"; > > + compatible = "405ex-crypto", > "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; > > Why is the "405ex-crypto" string there? > > > + EDMA: edma@40080000 { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "amcc,edma"; > > + device_type = "dma"; > > + /*complQ-fifo-memory = "ocm";*/ > > + cell-index = <0>; > > + reg = <0x40080000 0x00010000>; > > + dcr-reg = <0x060 0x09f>; > > + > > + interrupt-parent = <&UIC0>; > > + interrupts = </*complQ A */ 0x4 4 > > + /*EDMA Err */ 0x6 4 >; > > + > > + dma-channel@0 { > > + compatible = "amcc,edma-channel"; > > + /*descriptor-memory = "ocm";*/ > > + cell-index = <0>; > > + dcr-reg = <0x0000006a 0x0000006b>; > > + }; > > + }; > > What's this? Again, nothing binds to "amcc,edma" in the kernel or > patch. At the very least this (and OCM above) need some binding > descriptions added to Documentation/devicetree/bindings/powerpc/4xx/ > I will skip this in next patch. I will consider the bindings. > > + > > + MSI: dwc_pcie-msi@40090000 { > > + compatible = "amcc,dwc_pcie-msi", "dwc_pcie-msi"; > > + status = "ok"; > > Is the status property something that is set by U-Boot, or will it > always be "ok"? If the latter, I don't think you need to specify it > at all. > > Correct. There is no need of status. MSI is always enabled > > + reg = <0x40090000 0x100>; > > + interrupts =<0x0 0x1 0x2 0x3>; > > + interrupt-parent = <&MSI>; > > + #interrupt-cells = <1>; > > + #address-cells = <0>; > > + #size-cells = <0>; > > + interrupt-map = <0x0 &UIC0 0x0C 0x1 > > + 0x1 &UIC0 0x0D 0x1 > > + 0x2 &UIC0 0x0E 0x1 > > + 0x3 &UIC0 0x0F 0x1>; > > + }; > > Same binding comment here. > > > + > > + AHB: ahb { > > + device_type = "ahb"; > > I doubt the device_type is needed. > I believe device_type can be skipped in most of the cases. I will take care of this in next revision of patch. > > > + compatible = "amcc,405ex-ahb", "ibm,ahb"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + clock-frequency = <0>; /* Filled in by U-Boot */ > > Same binding comment for ahb. > > > + > > + lcd: lcd@58060000 { > > + device_type = "lcd"; > > Drop device_type. > > > + compatible = "apm,apm-lcd","apm,db9000"; > > + version = "apm-1.1"; > > Why is 'version' there? Version of what? The hardware itself, the > driver? I doubt this is needed. > It is chip version. There are some changes in this block with respect to chip revision. The PVR remains the same as old chip revision and there is no other register to specify revision. Uboot updates this parameter. I will skip this block from next patch and will reintroduce it when the actual driver is added. > > + reg = <0x58060000 0x00001000>; > > + interrupt-parent = <&UIC0>; > > + /* > > + * interrupt index 0 for chip 1.0 > > + * interrupt index 1 for chip 1.1 > > + */ > > + interrupts = <0x1c 2 0x1c 4>; > > + }; > > Same binding comment for apm,apm-lcd. I'm just going to assert again > that anything that doesn't have a defined binding and/or driver needs > to be documented when it's introduced. Repeat that for the rest of > the patch :). > Yes. > > > + > > + sdhc0: sdhc@58050000 { > > + device_type = "sdhc"; > > Drop device_type. > > > + compatible = "amcc,ahb-sdhc"; > > + #interrupt-cells = <1>; > > + reg = <0x58050000 0x100>; > > + interrupt-parent = <&UIC0>; > > + interrupts = <0x18 0x4>; > > + bootmode = "i2c"; > > + }; > > + > > + tdm0: tdm@58010000 { > > + device_type = "tdm"; > > Drop device_type. > > > + status = "disabled"; > > Is that set by U-Boot? > Yes. The chip is multiplexed. Some IPs get disabled/enabled based on bootmodes. > > > + compatible = "apm,ahb-tdm"; > > + #interrupt-cells = <1>; > > + reg = <0x58010000 0x100>; > > + interrupt-parent = <&UIC1>; > > + interrupts = <0x15 0x1>; > > + }; > > + > > + usbotg0: usbotg@58080000 { > > + device_type = "usb"; > > Drop device_type. > > > + compatible = "apm,usb-otg"; > > + reg = <0x58080000 0x10000>; > > + interrupt-parent = <&UIC0>; > > + interrupts = <0x1B 4>; > > + mode = "host"; > > + }; > > + spi0: spi@50000000 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + device_type = "spi"; > > Drop device_type. I think you're starting to get the trend, so repeat > for the rest of the devices. > > > + compatible = "apm,apm-spi"; > > + reg = <0x50000000 0x100>; > > + interrupt-parent = <&UIC0>; > > + interrupts = <0x7 1>; /* interrupt > number->0x7 Polarity->HIGH Sensitivity->LEVEL */ > > + half_duplex = <0x1>; /*0 = rx/tx mode, > 1 = eprom read mode */ > > + sysclk = <100000000>; /* input clock */ > > + bus_num = <0x0>; /* SPI = 0 */ > > > + > > + PCIE0: pciex@58020000 { > > + device_type = "pci"; > > + compatible = "ibm,plb-pciex", > "dwc-pciex", "amcc,dwc-pciex"; > > Why the unprefixed dwc-pciex compatible property? > I will correct it. > > + #interrupt-cells = <1>; > > + #size-cells = <2>; > > + #address-cells = <3>; > > + primary; > > + port = <0>; /* port number */ > > + status = "ok"; > > > > + PCIE1: pciex@58030000 { > > + device_type = "pci"; > > + compatible = "ibm,plb-pciex", > "dwc-pciex", "amcc,dwc-pciex"; > > + #interrupt-cells = <1>; > > + #size-cells = <2>; > > + #address-cells = <3>; > > + primary; > > + port = <1>; /* port number */ > > + status = "disabled"; > > Is this set by U-Boot? > Yes. Same as multiplexed comment. > > > > + sata@58040000 { > > + compatible = "sata-ahci"; > > Uh.. what? > It is designware SATA IP compatible with AHCI standard. I will reintroduce this block along with its driver. > > > + reg = <0x58040000 0x2000>; > > + interrupt-parent = <&UIC0>; > > + interrupts = <0x1a 1>; > > > > + ufc@0xFE000000 { > > + compatible = "ibm,ufc"; > > + reg = <0xFE000000 0x00010000>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + bootmode = "nand"; > > Is UFC some kind of new flash controller that isn't NDFC? Also, > bootmode seems to be a human and/or driver variable, not a description > of the hardware. > Yes. UFC is new flash controller. You are right about bootmode. > > + UART0: serial@50001000 { > > + device_type = "serial"; > > + compatible = "ns16550"; > > + reg = <0x50001000 0x00000100>; > > + virtual-reg = <0x50001000>; > > + clock-frequency = <300000000>; /* Filled > in by U-Boot */ > > + current-speed = <115200>; > > + interrupt-parent = <&UIC0>; > > + interrupts = <0x0 0x4>; > > + /*reg-shift = <2>;*/ > > This is commented out, but seems to be needed when you take the > word-addressed UDBG thing into account? > Yes. I will rethink on how it is implemented. > > > + IEEE1588_0: ieee1588ts0@400a5000 { > > + status = "ok"; > > + compatible = "ieee1588-ts"; > > What is that? > This is AMCC IEEE1588 block. I will correct the compatible string. > > diff --git a/arch/powerpc/configs/40x/klondike_defconfig > b/arch/powerpc/configs/40x/klondike_defconfig > > new file mode 100644 > > index 0000000..840f438 > > --- /dev/null > > +++ b/arch/powerpc/configs/40x/klondike_defconfig > > @@ -0,0 +1,1353 @@ > > +# > > +# Automatically generated file; DO NOT EDIT. > > +# Linux/powerpc 3.2.0-rc2 Kernel Configuration > > +# > > +# CONFIG_PPC64 is not set > > This is a full defconfig. We don't need a full config file. You can > generate one with 'make savedefconfig' that contains only the options > you need to set. > > I will do that. > > > > > diff --git a/arch/powerpc/kernel/udbg_16550.c > b/arch/powerpc/kernel/udbg_16550.c > > index 6837f83..dd3bce9 100644 > > --- a/arch/powerpc/kernel/udbg_16550.c > > +++ b/arch/powerpc/kernel/udbg_16550.c > > @@ -18,6 +18,19 @@ extern void real_writeb(u8 data, volatile u8 __iomem > *addr); > > extern u8 real_205_readb(volatile u8 __iomem *addr); > > extern void real_205_writeb(u8 data, volatile u8 __iomem *addr); > > > > +#ifdef CONFIG_UART_16550_WORD_ADDRESSABLE > > +struct NS16550 { > > + /* this struct must be packed */ > > + unsigned char rbr; /* 0 */ u8 s0[3]; > > An array of length 3 for something "word-addressable"? When did words > change to 3 bytes? Now, I still haven't finished my coffee yet, but > that is really confusing. > Again the name WORD_ADDRESSABLE is confusing. Hopefully my previous comment clears the confusion. > > + unsigned char ier; /* 1 */ u8 s1[3]; > > + unsigned char fcr; /* 2 */ u8 s2[3]; > > + unsigned char lcr; /* 3 */ u8 s3[3]; > > + unsigned char mcr; /* 4 */ u8 s4[3]; > > + unsigned char lsr; /* 5 */ u8 s5[3]; > > + unsigned char msr; /* 6 */ u8 s6[3]; > > + unsigned char scr; /* 7 */ u8 s7[3]; > > +}; > > +#else > > struct NS16550 { > > /* this struct must be packed */ > > unsigned char rbr; /* 0 */ > > @@ -29,6 +42,7 @@ struct NS16550 { > > unsigned char msr; /* 6 */ > > unsigned char scr; /* 7 */ > > }; > > +#endif /* CONFIG_UART_16550_WORD_ADDRESSABLE */ > > > > #define thr rbr > > #define iir fcr > > @@ -52,8 +66,16 @@ static struct NS16550 __iomem *udbg_comport; > > static void udbg_550_flush(void) > > { > > if (udbg_comport) { > > +#if defined(CONFIG_APM8018X) > > + int index; > > + for (index = 0; index < 3500; index++) { > > + if ((in_8(&udbg_comport->lsr) & LSR_THRE) == > LSR_THRE) > > + break; > > + } > > +#else > > What is index, and why do you read the same register 3500 times? That > doesn't sound like an index, it sounds like some kind of poor-mans > timeout. > This is hardware bug. Ideally there should not be any change in the code. I will try to fix it in better way. > > > while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) > > /* wait for idle */; > > +#endif /* CONFIG_APM8018X */ > > } > > } > > > > diff --git a/arch/powerpc/platforms/40x/Kconfig > b/arch/powerpc/platforms/40x/Kconfig > > index 1530229..3d0d1d9 100644 > > --- a/arch/powerpc/platforms/40x/Kconfig > > +++ b/arch/powerpc/platforms/40x/Kconfig > > @@ -186,3 +186,14 @@ config IBM405_ERR51 > > # bool > > # depends on !STB03xxx && PPC4xx_DMA > > # default y > > +# > > + > > +config APM8018X > > + bool "APM8018X" > > + depends on 40x > > + default y > > default n please. > Yes. > > > + select PPC40x_SIMPLE > > + select UART_16550_WORD_ADDRESSABLE > > + help > > + This option enables support for the AppliedMicro Klondike > board. > > + > > diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c > b/arch/powerpc/platforms/40x/ppc40x_simple.c > > index e8dd5c5..c8576af 100644 > > --- a/arch/powerpc/platforms/40x/ppc40x_simple.c > > +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c > > @@ -17,7 +17,7 @@ > > #include <asm/pci-bridge.h> > > #include <asm/ppc4xx.h> > > #include <asm/prom.h> > > -#include <asm/time.h> > > +#include <linux/time.h> > > Is this needed for a reason? If so, it should be submitted as a separate > patch. > checkpatch.pl scripts throws warning. It asks to change <asm/time.h> to <linux/time.h> > > #include <asm/udbg.h> > > #include <asm/uic.h> > > > > @@ -29,6 +29,7 @@ static __initdata struct of_device_id ppc40x_of_bus[] > = { > > { .compatible = "ibm,plb4", }, > > { .compatible = "ibm,opb", }, > > { .compatible = "ibm,ebc", }, > > + { .compatible = "ibm,ahb", }, > > { .compatible = "simple-bus", }, > > {}, > > }; > > @@ -55,6 +56,7 @@ static const char *board[] __initdata = { > > "amcc,haleakala", > > "amcc,kilauea", > > "amcc,makalu", > > + "amcc,klondike", > > "est,hotfoot" > > }; > > > > -- > > 1.6.1.rc3 > > > > > CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and contains information that is confidential and proprietary to AppliedMicro Corporation or its subsidiaries. It is to be used solely for the purpose of furthering the parties' business relationship. All unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b177caa..3f2cc36 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -978,3 +978,9 @@ config PPC_LIB_RHEAP bool source "arch/powerpc/kvm/Kconfig" + +config UART_16550_WORD_ADDRESSABLE + bool + default n + help + Enable this if your UART 16550 is word addressable. diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 645a7c9..6dd498f 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -132,9 +132,15 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, #define DCRN_MAL0_CFG 0x180 #define MAL_RESET 0x80000000 +#if defined(CONFIG_APM8018X) +#define DCRN_CPR0_ADDR 0xa +#define DCRN_CPR0_DATA 0xb +#else /* 440EP Clock/Power-on Reset regs */ #define DCRN_CPR0_ADDR 0xc #define DCRN_CPR0_DATA 0xd +#endif /* CONFIG_APM8018X */ + #define CPR0_PLLD0 0x60 #define CPR0_OPBD0 0xc0 #define CPR0_PERD0 0xe0 diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts new file mode 100644 index 0000000..9372a52 --- /dev/null +++ b/arch/powerpc/boot/dts/klondike.dts @@ -0,0 +1,668 @@ +/* + * Device Tree Source for AMCC Klondike (405) + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tanmay Inamdar <tinamdar@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,klondike"; + compatible = "amcc,klondike"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0x00000000>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + timebase-frequency = <300000000>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + OCM: ocm@20000000 { + compatible = "ibm,ocm"; + status = "enabled"; + cell-index = <1>; + reg = < 0x20000000 0x1f000 /* 128K - 4K NAND */ + 0xfffe0000 0x1f000>; /* 128K - 4K I2C */ + bootmode = "nand"; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; + dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ + }; + crypto: crypto@40000000 { + device_type = "crypto"; + compatible = "405ex-crypto", "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0x40000000 0x00080000>; /* 512KB */ + interrupt-parent = <&UIC0>; + interrupts = <0x19 0x4>; + }; + EDMA: edma@40080000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "amcc,edma"; + device_type = "dma"; + /*complQ-fifo-memory = "ocm";*/ + cell-index = <0>; + reg = <0x40080000 0x00010000>; + dcr-reg = <0x060 0x09f>; + + interrupt-parent = <&UIC0>; + interrupts = </*complQ A */ 0x4 4 + /*EDMA Err */ 0x6 4 >; + + dma-channel@0 { + compatible = "amcc,edma-channel"; + /*descriptor-memory = "ocm";*/ + cell-index = <0>; + dcr-reg = <0x0000006a 0x0000006b>; + }; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + descriptor-memory = "ocm"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <16>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4 + /*RXEOB*/ 0x1 &UIC1 0x7 0x4 + /*SERR*/ 0x2 &UIC1 0x1 0x4 + /*TXDE*/ 0x3 &UIC1 0x2 0x4 + /*RXDE*/ 0x4 &UIC1 0x3 0x4 + /*TX0 COAL*/ 0x5 &UIC1 0x18 0x2 + /*TX1 COAL*/ 0x6 &UIC1 0x19 0x2 + /*RX0 COAL*/ 0x7 &UIC1 0x1a 0x2 + /*RX1 COAL*/ 0x8 &UIC1 0x1b 0x2 >; + interrupt-map-mask = <0xffffffff>; + }; + + MSI: dwc_pcie-msi@40090000 { + compatible = "amcc,dwc_pcie-msi", "dwc_pcie-msi"; + status = "ok"; + reg = <0x40090000 0x100>; + interrupts =<0x0 0x1 0x2 0x3>; + interrupt-parent = <&MSI>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 &UIC0 0x0C 0x1 + 0x1 &UIC0 0x0D 0x1 + 0x2 &UIC0 0x0E 0x1 + 0x3 &UIC0 0x0F 0x1>; + }; + + AHB: ahb { + device_type = "ahb"; + compatible = "amcc,405ex-ahb", "ibm,ahb"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + lcd: lcd@58060000 { + device_type = "lcd"; + compatible = "apm,apm-lcd","apm,db9000"; + version = "apm-1.1"; + reg = <0x58060000 0x00001000>; + interrupt-parent = <&UIC0>; + /* + * interrupt index 0 for chip 1.0 + * interrupt index 1 for chip 1.1 + */ + interrupts = <0x1c 2 0x1c 4>; + }; + + sdhc0: sdhc@58050000 { + device_type = "sdhc"; + compatible = "amcc,ahb-sdhc"; + #interrupt-cells = <1>; + reg = <0x58050000 0x100>; + interrupt-parent = <&UIC0>; + interrupts = <0x18 0x4>; + bootmode = "i2c"; + }; + + tdm0: tdm@58010000 { + device_type = "tdm"; + status = "disabled"; + compatible = "apm,ahb-tdm"; + #interrupt-cells = <1>; + reg = <0x58010000 0x100>; + interrupt-parent = <&UIC1>; + interrupts = <0x15 0x1>; + }; + + usbotg0: usbotg@58080000 { + device_type = "usb"; + compatible = "apm,usb-otg"; + reg = <0x58080000 0x10000>; + interrupt-parent = <&UIC0>; + interrupts = <0x1B 4>; + mode = "host"; + }; + spi0: spi@50000000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "spi"; + compatible = "apm,apm-spi"; + reg = <0x50000000 0x100>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 1>; /* interrupt number->0x7 Polarity->HIGH Sensitivity->LEVEL */ + half_duplex = <0x1>; /*0 = rx/tx mode, 1 = eprom read mode */ + sysclk = <100000000>; /* input clock */ + bus_num = <0x0>; /* SPI = 0 */ + + m25p80@0 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "stm,m25p80", "jedec-flash"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-cpha; + spi-cpol; + + partition@0x00000000 { + label = "m25p80-u-boot"; + reg = <0x00000000 0x00080000>; /* 512KB */ + }; + partition@0x00080000 { + label = "m25p80-u-boot-env"; + reg = <0x00080000 0x00080000>; /* 512KB */ + }; + partition@0x00100000 { + label = "m25p80-kernel"; + reg = <0x00100000 0x00300000>; /* 3MB */ + }; + partition@0x00400000 { + label = "m25p80-dtb"; + reg = <0x00400000 0x00100000>; /* 1MB */ + }; + partition@0x00500000 { + label = "m25p80-ramdisk"; + reg = <0x00500000 0x00B00000>; /* 11MB */ + }; + }; + + mt29f@0 { + status = "ok"; + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "micron,mt29f"; + reg = <1>; + spi-max-frequency = <4000000>; + spi-cpha; + spi-cpol; + + partition@0x00000000 { + label = "mt29f-u-boot"; + reg = <0x00000000 0x00080000>; /* 512KB */ + }; + partition@0x00080000 { + label = "mt29f-u-boot-env"; + reg = <0x00080000 0x00080000>; /* 512KB */ + }; + partition@0x00100000 { + label = "mt29f-kernel"; + reg = <0x00100000 0x00300000>; /* 3MB */ + }; + partition@0x00400000 { + label = "mt29f-dtb"; + reg = <0x00400000 0x00100000>; /* 1MB */ + }; + partition@0x00500000 { + label = "mt29f-ramdisk"; + reg = <0x00500000 0x01900000>; /* 25MB */ + }; + partition@0x01e00000 { + label = "mt29f-data"; + reg = <0x01e00000 0x06200000>; /* 98MB */ + }; + }; + }; + + PCIE0: pciex@58020000 { + device_type = "pci"; + compatible = "ibm,plb-pciex", "dwc-pciex", "amcc,dwc-pciex"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + primary; + port = <0>; /* port number */ + status = "ok"; + + reg = < 0xa0000000 0x01000000 /* CFG Region Space */ + 0x58020000 0x8000>; /* CSR registers */ + + /* Outbound ranges, two memory and one IO, + * <type> <pci> <cpu> <size> + */ + + ranges = <0x02000000 0x0 0x80000000 0x70000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0x80000000 0x0 0x00010000>; + + /* Inbound 512MB range starting at 0 + * <type> <pci> <cpu> <size> + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0 to 0x10 */ + bus-range = <0x0 0x0f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC2 0x2 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x3 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x4 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x5 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@58030000 { + device_type = "pci"; + compatible = "ibm,plb-pciex", "dwc-pciex", "amcc,dwc-pciex"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + primary; + port = <1>; /* port number */ + status = "disabled"; + + reg = < 0xe0000000 0x01000000 /* CFG Region Space */ + 0x58030000 0x8000>; /* CSR registers */ + + /* Outbound ranges, one memory and one IO, + * <type> <pci> <cpu> <size> + */ + + ranges = <0x02000000 0x0 0x80000000 0xB0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xC0000000 0x0 0x00010000>; + + /* Inbound 512MB range starting at 0 + * <type> <pci> <cpu> <size> + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC2 0xa 0x1 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0xb 0x2 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0xc 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0xd 0x2 /* swizzled int D */>; + }; + + sata@58040000 { + compatible = "sata-ahci"; + reg = <0x58040000 0x2000>; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 1>; + }; + + + gpio@5000a000 { + compatible = "dwc,gpio"; + reg = <0x5000a000 0x80>; + }; + + gpt@50007000 { + compatible = "dwc,gpt"; + reg = <0x50007000 0xff>; + interrupt-parent = <&UIC1>; + interrupts = < + 0x0c 1 + 0x0d 1 + 0x0e 1 + 0x0f 1 + 0x10 1 + 0x11 1 + 0x12 1 + >; + }; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x20000000 0x20000000 0x30000000 + 0x50000000 0x50000000 0x10000000 + 0x60000000 0x60000000 0x10000000 + 0xFE000000 0xFE000000 0x00010000>; + dcr-reg = <0x100 0x020>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <1>; + #size-cells = <1>; + clock-frequency = <3000000000>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + ranges = <0xFE000000 0xFE000000 0x00010000>; + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + ufc@0xFE000000 { + compatible = "ibm,ufc"; + reg = <0xFE000000 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bootmode = "nand"; + nand { + #address-cells = <1>; + #size-cells = <1>; + partition@0x00000000 { + label = "ufc-u-boot"; + reg = <0x00000000 0x00080000>; /* 512 KB */ + }; + partition@0x00080000 { + label = "ufc-u-boot-env"; + reg = <0x00080000 0x00080000>; /* 512 KB */ + }; + partition@0x200000 { + label = "ufc-kernel"; + reg = <0x00100000 0x00300000>; /* 3 MB */ + }; + partition@0x00480000 { + label = "ufc-dtb"; + reg = <0x00400000 0x00100000>; /* 1 MB */ + }; + partition@0x00500000 { + label = "ufc-ramdisk"; + reg = <0x00500000 0x01900000>; /* 25 MB */ + }; + partition@0x01e00000 { + label = "ufc-jffs2-0"; + reg = <0x01e00000 0x0e200000>; /* 226 MB */ + }; + }; + }; + }; + + UART0: serial@50001000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x50001000 0x00000100>; + virtual-reg = <0x50001000>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + /*reg-shift = <2>;*/ + }; + + + UART1: serial@50002000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x50002000 0x00000100>; + virtual-reg = <0x50002000>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + /*reg-shift = <2>;*/ + }; + + + IIC0: i2c@50005000 { + status = "ok"; + compatible = "dw,i2c", "amcc,dw-i2c"; + reg = <0x50005000 0x00000100>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + }; + }; + + IIC1: i2c@50006000 { + status = "ok"; + compatible = "dw,i2c", "amcc,dw-i2c"; + reg = <0x50006000 0x00000100>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + eeprom@54 { + compatible = "eeprom"; + reg = <0x54>; + }; + }; + + RGMII0: emac-rgmii@400a2000 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0x400a2000 0x00000010>; + has-mdio; + }; + + EMAC0: ethernet@400a0000 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4", "ibm-emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>; + reg = <0x400a0000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0x0>; + mal-rx-channel = <0x0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x2>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@400a1000 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4", "ibm-emac4sync"; + status = "disabled"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>; + reg = <0x400a1000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x3>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + TAH0: emac-tah@400a3000 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0x400a3000 0x100>; + }; + + TAH1: emac-tah@400a4000 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0x400a4000 0x100>; + }; + + IEEE1588_0: ieee1588ts0@400a5000 { + status = "ok"; + compatible = "ieee1588-ts"; + reg = <0x400a5000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x1 0x1c 0x1>; + }; + + IEEE1588_1: ieee1588ts1@400a7000 { + status = "disabled"; /* Enabled by U-boot */ + compatible = "ieee1588-ts"; + reg = <0x400a7000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 0x1 0x1d 0x1>; + }; + + ADC: adc@50009000 { + compatible = "adc405ex", "amcc,adc405ex"; + reg = <0x50009000 0x80>; + channels = <3>; + interrupt-parent = <&UIC0>; + interrupts = <0x8 0x1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@50001000"; + }; +}; diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig new file mode 100644 index 0000000..840f438 --- /dev/null +++ b/arch/powerpc/configs/40x/klondike_defconfig @@ -0,0 +1,1353 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/powerpc 3.2.0-rc2 Kernel Configuration +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_32 is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_32BIT=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_NR_IRQS=512 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_EPAPR_BOOT is not set +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_HAVE_IRQ_WORK=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_FHANDLE is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_HAVE_GENERIC_HARDIRQS=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SPARSE_IRQ=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +# CONFIG_SPARSE_IRQ is not set + +# +# RCU Subsystem +# +CONFIG_TINY_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_NAMESPACES is not set +# CONFIG_SCHED_AUTOGROUP is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_JUMP_LABEL is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_BSGLIB is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y +# CONFIG_PPC4xx_PCI_EXPRESS is not set +# CONFIG_PPC_XICS is not set +# CONFIG_PPC_ICP_NATIVE is not set +# CONFIG_PPC_ICP_HV is not set +# CONFIG_PPC_ICS_RTAS is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_ISS4xx is not set +# CONFIG_PPC4xx_GPIO is not set +# CONFIG_ACADIA is not set +# CONFIG_EP405 is not set +# CONFIG_HOTFOOT is not set +# CONFIG_KILAUEA is not set +# CONFIG_MAKALU is not set +# CONFIG_WALNUT is not set +# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +CONFIG_PPC40x_SIMPLE=y +CONFIG_APM8018X=y +# CONFIG_PPC_WSP is not set +# CONFIG_KVM_GUEST is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_PPC_EPAPR_HV_PIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_MPIC_U3_HT_IRQS is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_P7_NAP is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_COMPACTION is not set +# CONFIG_MIGRATION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NEED_PER_CPU_KM=y +# CONFIG_CLEANCACHE is not set +CONFIG_PPC_4K_PAGES=y +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_PM_SLEEP=y +# CONFIG_PM_RUNTIME is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PPC4xx_CPM=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set +# CONFIG_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE_DEMUX is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=y +CONFIG_BRIDGE=y +CONFIG_BRIDGE_IGMP_SNOOPING=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +# CONFIG_BATMAN_ADV is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +CONFIG_PROC_DEVICETREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_IRQ=y +CONFIG_OF_DEVICE=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_SCSI_BNX2X_FCOE is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +# CONFIG_MD_LINEAR is not set +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID456=y +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set +# CONFIG_TARGET_CORE is not set +CONFIG_FUSION=y +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +CONFIG_FUSION_SAS=y +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_MII is not set +# CONFIG_MACVLAN is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# +CONFIG_ETHERNET=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_DNET is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_NET_VENDOR_IBM=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_TXB=64 +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_EMAC_DEBUG is not set +# CONFIG_IBM_EMAC_ZMII is not set +# CONFIG_IBM_EMAC_RGMII is not set +# CONFIG_IBM_EMAC_TAH is not set +# CONFIG_IBM_EMAC_EMAC4 is not set +# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +CONFIG_IGB=y +# CONFIG_IGBVF is not set +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +CONFIG_NET_VENDOR_I825XX=y +# CONFIG_ZNET is not set +# CONFIG_IP1000 is not set +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_ETHOC is not set +# CONFIG_NET_PACKET_ENGINE is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_SFC is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_XILINX is not set +# CONFIG_FDDI is not set +# CONFIG_PHYLIB is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_TR is not set +CONFIG_WLAN=y +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_RTL8180 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_BRCMSMAC is not set +# CONFIG_HOSTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_WL1251 is not set +# CONFIG_WL12XX_MENU is not set +# CONFIG_MWIFIEX is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_DW is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MFD_HSU is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_PCH_UART is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_RAMOOPS is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set + +# +# PPS generators support +# + +# +# PTP clock support +# + +# +# Enable Device Drivers -> PPS to see the PTP clock options. +# +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set +# CONFIG_STUB_POULSBO is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# Virtio drivers +# +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set +# CONFIG_VIRTIO_MMIO is not set +# CONFIG_STAGING is not set + +# +# Hardware Spinlock drivers +# +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_VIRT_DRIVERS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_FANOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_QUOTACTL is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_RAID6_PQ=y +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +# CONFIG_CRC8 is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_XZ_DEC is not set +# CONFIG_XZ_DEC_BCJ is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_AVERAGE=y +# CONFIG_CORDIC is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_HARDLOCKUP_DETECTOR is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ASYNC_RAID6_TEST is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_SEQIV=y + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=y +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +CONFIG_CRYPTO_XTS=y + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set +CONFIG_UART_16550_WORD_ADDRESSABLE=y diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h index 380274d..c900cfd 100644 --- a/arch/powerpc/include/asm/dcr-regs.h +++ b/arch/powerpc/include/asm/dcr-regs.h @@ -24,9 +24,18 @@ * of the driver main register set */ +#if defined(CONFIG_APM8018X) +/* CPR */ +#define DCRN_CPR0_CONFIG_ADDR 0xa +#define DCRN_CPR1_CONFIG_DATA 0xb +/* AHB */ +#define DCRN_SDR1_CONFIG_ADDR 0xc +#define DCRN_SDR1_CONFIG_DATA 0xd +#else /* CPRs (440GX and 440SP/440SPe) */ #define DCRN_CPR0_CONFIG_ADDR 0xc #define DCRN_CPR0_CONFIG_DATA 0xd +#endif /* CONFIG_APM8018X */ /* SDRs (440GX and 440SP/440SPe) */ #define DCRN_SDR0_CONFIG_ADDR 0xe @@ -79,6 +88,17 @@ #define SDR0_ETH_CFG 0x4103 #define SDR0_ETH_CFG_ECS 0x00000100 /* EMAC int clk source */ +#ifdef CONFIG_APM8018X +#define SDR0_ETH_CFG_1588SPD0 (1 << 29) +#define SDR0_ETH_CFG_1588SPD1 (1 << 28) +#define SDR0_ETH_CFG_DIS (1 << 20) +#define GPIO_SDR0_CFG0 0x30 +#define GPIO_SDR0_CFG1 0x31 +#define GPIO_SDR0_CFG2 0x32 +#define GPIO_SDR0_CFG3 0x33 +#define GPIO_SDR0_CFG4 0x34 +#endif /* CONFIG_APM8018X */ + /* * All those DCR register addresses are offsets from the base address * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index edae5bb..e5c51a6 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1505,6 +1505,58 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, + { /* APM80186-SK */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x7ff11432, + .cpu_name = "APM80186-SK", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* APM80186-NK */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x7ff11433, + .cpu_name = "APM80186-NK", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* APM80187-SK */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x7ff11434, + .cpu_name = "APM80187-SK", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* APM80187-NK */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x7ff11435, + .cpu_name = "APM80187-NK", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 6837f83..dd3bce9 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -18,6 +18,19 @@ extern void real_writeb(u8 data, volatile u8 __iomem *addr); extern u8 real_205_readb(volatile u8 __iomem *addr); extern void real_205_writeb(u8 data, volatile u8 __iomem *addr); +#ifdef CONFIG_UART_16550_WORD_ADDRESSABLE +struct NS16550 { + /* this struct must be packed */ + unsigned char rbr; /* 0 */ u8 s0[3]; + unsigned char ier; /* 1 */ u8 s1[3]; + unsigned char fcr; /* 2 */ u8 s2[3]; + unsigned char lcr; /* 3 */ u8 s3[3]; + unsigned char mcr; /* 4 */ u8 s4[3]; + unsigned char lsr; /* 5 */ u8 s5[3]; + unsigned char msr; /* 6 */ u8 s6[3]; + unsigned char scr; /* 7 */ u8 s7[3]; +}; +#else struct NS16550 { /* this struct must be packed */ unsigned char rbr; /* 0 */ @@ -29,6 +42,7 @@ struct NS16550 { unsigned char msr; /* 6 */ unsigned char scr; /* 7 */ }; +#endif /* CONFIG_UART_16550_WORD_ADDRESSABLE */ #define thr rbr #define iir fcr @@ -52,8 +66,16 @@ static struct NS16550 __iomem *udbg_comport; static void udbg_550_flush(void) { if (udbg_comport) { +#if defined(CONFIG_APM8018X) + int index; + for (index = 0; index < 3500; index++) { + if ((in_8(&udbg_comport->lsr) & LSR_THRE) == LSR_THRE) + break; + } +#else while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) /* wait for idle */; +#endif /* CONFIG_APM8018X */ } } diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 1530229..3d0d1d9 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -186,3 +186,14 @@ config IBM405_ERR51 # bool # depends on !STB03xxx && PPC4xx_DMA # default y +# + +config APM8018X + bool "APM8018X" + depends on 40x + default y + select PPC40x_SIMPLE + select UART_16550_WORD_ADDRESSABLE + help + This option enables support for the AppliedMicro Klondike board. + diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c index e8dd5c5..c8576af 100644 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -17,7 +17,7 @@ #include <asm/pci-bridge.h> #include <asm/ppc4xx.h> #include <asm/prom.h> -#include <asm/time.h> +#include <linux/time.h> #include <asm/udbg.h> #include <asm/uic.h> @@ -29,6 +29,7 @@ static __initdata struct of_device_id ppc40x_of_bus[] = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,opb", }, { .compatible = "ibm,ebc", }, + { .compatible = "ibm,ahb", }, { .compatible = "simple-bus", }, {}, }; @@ -55,6 +56,7 @@ static const char *board[] __initdata = { "amcc,haleakala", "amcc,kilauea", "amcc,makalu", + "amcc,klondike", "est,hotfoot" };

powerpc/40x: Add APM8018X SOC support

Commit Message

Comments

Patch