Message ID | 1321735649-27138-4-git-send-email-swarren@nvidia.com |
---|---|
State | RFC |
Headers | show |
* Stephen Warren wrote: > The Toshiba AC100 (code-name Paz00m a/k/a Dynabook AZ) is an netbook derived > from the NVIDIA Tegra Harmony reference board. It ships with Ubuntu, but is > often repurposed to run Linux. This patch adds just enough support to get a > U-Boot serial console, and the ability access built-in eMMC and the external > SD slot. > > FIXME: Since this board is not marketed by NVIDIA (Toshiba is the vendor, and > Compal the ODM), this board should possibly be moved out of the board/nvidia > directory. > > Signed-off-by: Stephen Warren <swarren@nvidia.com> > --- > MAINTAINERS | 1 + > board/nvidia/paz00/Makefile | 41 ++++++++++++++++++++++ > board/nvidia/paz00/paz00.c | 81 +++++++++++++++++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/paz00.h | 52 +++++++++++++++++++++++++++ > 5 files changed, 176 insertions(+), 0 deletions(-) > create mode 100644 board/nvidia/paz00/Makefile > create mode 100644 board/nvidia/paz00/paz00.c > create mode 100644 include/configs/paz00.h [...] > diff --git a/include/configs/paz00.h b/include/configs/paz00.h > new file mode 100644 > index 0000000..fcec6fa > --- /dev/null > +++ b/include/configs/paz00.h > @@ -0,0 +1,52 @@ > +/* > + * Copyright (c) 2010,2011, NVIDIA CORPORATION. All rights reserved. > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#include <asm/sizes.h> > +#include "tegra2-common.h" > + > +/* High-level configuration options */ > +#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M" Can we get rid of this? I think I remember some discussion about the same topic going on the linux-tegra/devicetree mailing lists, where it was decided that /mem-reserve/ entries should be dropped until some driver in the mainline kernel was actually going to use this memory. Perhaps U-Boot should take the same approach. Thierry > +#define V_PROMPT "Tegra2 (Paz00) # " > +#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Paz00" > + > +/* Board-specific serial config */ > +#define CONFIG_SERIAL_MULTI > +#define CONFIG_TEGRA2_ENABLE_UARTA > +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE > + > +#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 > +/* > + * The following should be 512MB, but I don't know how to set that value > + * It doesn't matter, since this isn't really used any more > + */ > +#define CONFIG_SYS_BOARD_ODMDATA 0x200d8011 /* lp1, 1GB */ > + > +#define CONFIG_BOARD_EARLY_INIT_F > + > +/* SD/MMC */ > +#define CONFIG_MMC > +#define CONFIG_GENERIC_MMC > +#define CONFIG_TEGRA2_MMC > +#define CONFIG_CMD_MMC > + > +#define CONFIG_DOS_PARTITION > +#define CONFIG_EFI_PARTITION > +#define CONFIG_CMD_EXT2 > +#define CONFIG_CMD_FAT > +#endif /* __CONFIG_H */ > -- > 1.7.5.4 > > >
Hi Stephen, first, thanks for looking at this! On Sunday 20 November 2011 13:10:08 Thierry Reding wrote: > * Stephen Warren wrote: > > The Toshiba AC100 (code-name Paz00m a/k/a Dynabook AZ) is an netbook > > derived from the NVIDIA Tegra Harmony reference board. It ships with > > Ubuntu, but is often repurposed to run Linux. This patch adds just > > enough support to get a U-Boot serial console, and the ability access > > built-in eMMC and the external SD slot. > > > > FIXME: Since this board is not marketed by NVIDIA (Toshiba is the > > vendor, and Compal the ODM), this board should possibly be moved out of > > the board/nvidia directory. > > > > Signed-off-by: Stephen Warren <swarren@nvidia.com> > > --- > > > > MAINTAINERS | 1 + > > board/nvidia/paz00/Makefile | 41 ++++++++++++++++++++++ > > board/nvidia/paz00/paz00.c | 81 > > +++++++++++++++++++++++++++++++++++++++++++ boards.cfg > > | 1 + > > include/configs/paz00.h | 52 +++++++++++++++++++++++++++ > > 5 files changed, 176 insertions(+), 0 deletions(-) > > create mode 100644 board/nvidia/paz00/Makefile > > create mode 100644 board/nvidia/paz00/paz00.c > > create mode 100644 include/configs/paz00.h > > [...] > > > diff --git a/include/configs/paz00.h b/include/configs/paz00.h > > new file mode 100644 > > index 0000000..fcec6fa > > --- /dev/null > > +++ b/include/configs/paz00.h > > @@ -0,0 +1,52 @@ > > +/* > > + * Copyright (c) 2010,2011, NVIDIA CORPORATION. All rights reserved. > > + * > > + * See file CREDITS for list of people who contributed to this > > + * project. > > + * > > + * This program is free software; you can redistribute it and/or modify > > it + * under the terms and conditions of the GNU General Public > > License, + * version 2, as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope it will be useful, but > > WITHOUT + * ANY WARRANTY; without even the implied warranty of > > MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > General Public License for + * more details. > > + */ > > + > > +#ifndef __CONFIG_H > > +#define __CONFIG_H > > + > > +#include <asm/sizes.h> > > +#include "tegra2-common.h" > > + > > +/* High-level configuration options */ > > +#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M" > > Can we get rid of this? I think I remember some discussion about the same > topic going on the linux-tegra/devicetree mailing lists, where it was > decided that /mem-reserve/ entries should be dropped until some driver in > the mainline kernel was actually going to use this memory. Perhaps U-Boot > should take the same approach. I also vote for this. Additionally, most users prefer mem=448M here. The device was original ships with 448 MB user memory, which was later reduced to 384 MB, maybe because of flash player requirements. I'm also not sure if nvmem is needed at all (maybe for android original kernel only) > > +#define V_PROMPT "Tegra2 (Paz00) # " > > +#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Paz00" > > + > > +/* Board-specific serial config */ > > +#define CONFIG_SERIAL_MULTI > > +#define CONFIG_TEGRA2_ENABLE_UARTA > > +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE > > + > > +#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 > > +/* > > + * The following should be 512MB, but I don't know how to set that > > value > > + * It doesn't matter, since this isn't really used any more > > + */ > > +#define CONFIG_SYS_BOARD_ODMDATA 0x200d8011 /* lp1, 1GB */ I don't know what is the effect of this paramter, but paz00 has 512 MB. The original valu was 0x8000c0085, AFAIK, which leaves most stuff on the default value. Marc > > + > > +#define CONFIG_BOARD_EARLY_INIT_F > > + > > +/* SD/MMC */ > > +#define CONFIG_MMC > > +#define CONFIG_GENERIC_MMC > > +#define CONFIG_TEGRA2_MMC > > +#define CONFIG_CMD_MMC > > + > > +#define CONFIG_DOS_PARTITION > > +#define CONFIG_EFI_PARTITION > > +#define CONFIG_CMD_EXT2 > > +#define CONFIG_CMD_FAT > > +#endif /* __CONFIG_H */
On 11/20/2011 10:39 AM, Marc Dietrich wrote: > On Sunday 20 November 2011 13:10:08 Thierry Reding wrote: >> * Stephen Warren wrote: >>> The Toshiba AC100 (code-name Paz00m a/k/a Dynabook AZ) is an netbook >>> derived from the NVIDIA Tegra Harmony reference board. It ships with >>> Ubuntu, but is often repurposed to run Linux. This patch adds just >>> enough support to get a U-Boot serial console, and the ability access >>> built-in eMMC and the external SD slot. ... >>> +#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M" >> >> Can we get rid of this? I think I remember some discussion about the same >> topic going on the linux-tegra/devicetree mailing lists, where it was >> decided that /mem-reserve/ entries should be dropped until some driver in >> the mainline kernel was actually going to use this memory. Perhaps U-Boot >> should take the same approach. > > I also vote for this. Additionally, most users prefer mem=448M here. The > device was original ships with 448 MB user memory, which was later reduced to > 384 MB, maybe because of flash player requirements. I'm also not sure if nvmem > is needed at all (maybe for android original kernel only) Sounds like a plan. I've done this, and also moved the files to board/compal/paz00 as suggested elsewhere. >>> +#define V_PROMPT "Tegra2 (Paz00) # " >>> +#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Paz00" >>> + >>> +/* Board-specific serial config */ >>> +#define CONFIG_SERIAL_MULTI >>> +#define CONFIG_TEGRA2_ENABLE_UARTA >>> +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE >>> + >>> +#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 >>> +/* >>> + * The following should be 512MB, but I don't know how to set that >>> value >>> + * It doesn't matter, since this isn't really used any more >>> + */ >>> +#define CONFIG_SYS_BOARD_ODMDATA 0x200d8011 /* lp1, 1GB */ > > I don't know what is the effect of this paramter, but paz00 has 512 MB. The > original valu was 0x8000c0085, AFAIK, which leaves most stuff on the default > value. OK, I've switched to that value (where did you extract it from, BTW), and after fixing a bug in arch/arm/cpu/armv7/tegra2/board.c:query_sdram_size() (default==512M, not 1G), it all works.
diff --git a/MAINTAINERS b/MAINTAINERS index c532c29..e339125 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -880,6 +880,7 @@ Tom Warren <twarren@nvidia.com> Stephen Warren <swarren@nvidia.com> ventana Tegra2 (ARM7 & A9 Dual Core) + paz00 Tegra2 (ARM7 & A9 Dual Core) Lei Wen <leiwen@marvell.com> diff --git a/board/nvidia/paz00/Makefile b/board/nvidia/paz00/Makefile new file mode 100644 index 0000000..470931c --- /dev/null +++ b/board/nvidia/paz00/Makefile @@ -0,0 +1,41 @@ +# +# Copyright (c) 2010,2011, NVIDIA CORPORATION. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o +COBJS += ../common/board.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/nvidia/paz00/paz00.c b/board/nvidia/paz00/paz00.c new file mode 100644 index 0000000..20534ac --- /dev/null +++ b/board/nvidia/paz00/paz00.c @@ -0,0 +1,81 @@ +/* + * Copyright (c) 2010,2011, NVIDIA CORPORATION. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/tegra2.h> +#include <asm/arch/pinmux.h> +#include <asm/gpio.h> +#ifdef CONFIG_TEGRA2_MMC +#include <mmc.h> +#endif +#include "../common/board.h" + +/* + * Routine: gpio_config_uart + * Description: Does nothing on Paz00 - no conflict w/SPI. + */ +void gpio_config_uart(void) +{ +} + +#ifdef CONFIG_TEGRA2_MMC +/* + * Routine: pin_mux_mmc + * Description: setup the pin muxes/tristate values for the SDMMC(s) + */ +static void pin_mux_mmc(void) +{ + /* SDMMC4: config 3, x8 on 2nd set of pins */ + pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4); + pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4); + pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4); + + pinmux_tristate_disable(PINGRP_ATB); + pinmux_tristate_disable(PINGRP_GMA); + pinmux_tristate_disable(PINGRP_GME); + + /* SDMMC1: SDIO1_CLK, SDIO1_CMD, SDIO1_DAT[3:0] */ + pinmux_set_func(PINGRP_SDMMC1, PMUX_FUNC_SDIO1); + + pinmux_tristate_disable(PINGRP_SDMMC1); + + /* For power GPIO PV1 */ + pinmux_tristate_disable(PINGRP_UAC); + /* For CD GPIO PI5 */ + pinmux_tristate_disable(PINGRP_ATC); +} + +/* this is a weak define that we are overriding */ +int board_mmc_init(bd_t *bd) +{ + debug("board_mmc_init called\n"); + + /* Enable muxes, etc. for SDMMC controllers */ + pin_mux_mmc(); + + debug("board_mmc_init: init eMMC\n"); + /* init dev 0, eMMC chip, with 4-bit bus */ + /* The board has an 8-bit bus, but 8-bit doesn't work yet */ + tegra2_mmc_init(0, 4, -1, -1); + + debug("board_mmc_init: init SD slot\n"); + /* init dev 3, SD slot, with 4-bit bus */ + tegra2_mmc_init(3, 4, GPIO_PV1, GPIO_PI5); + + return 0; +} +#endif diff --git a/boards.cfg b/boards.cfg index 5c2e01b..0d198df 100644 --- a/boards.cfg +++ b/boards.cfg @@ -204,6 +204,7 @@ s5pc210_universal arm armv7 universal_c210 samsung smdkv310 arm armv7 smdkv310 samsung s5pc2xx harmony arm armv7 harmony nvidia tegra2 seaboard arm armv7 seaboard nvidia tegra2 +paz00 arm armv7 paz00 nvidia tegra2 ventana arm armv7 ventana nvidia tegra2 u8500_href arm armv7 u8500 st-ericsson u8500 actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 diff --git a/include/configs/paz00.h b/include/configs/paz00.h new file mode 100644 index 0000000..fcec6fa --- /dev/null +++ b/include/configs/paz00.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2010,2011, NVIDIA CORPORATION. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/sizes.h> +#include "tegra2-common.h" + +/* High-level configuration options */ +#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M" +#define V_PROMPT "Tegra2 (Paz00) # " +#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Paz00" + +/* Board-specific serial config */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_TEGRA2_ENABLE_UARTA +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 +/* + * The following should be 512MB, but I don't know how to set that value + * It doesn't matter, since this isn't really used any more + */ +#define CONFIG_SYS_BOARD_ODMDATA 0x200d8011 /* lp1, 1GB */ + +#define CONFIG_BOARD_EARLY_INIT_F + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA2_MMC +#define CONFIG_CMD_MMC + +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#endif /* __CONFIG_H */
The Toshiba AC100 (code-name Paz00m a/k/a Dynabook AZ) is an netbook derived from the NVIDIA Tegra Harmony reference board. It ships with Ubuntu, but is often repurposed to run Linux. This patch adds just enough support to get a U-Boot serial console, and the ability access built-in eMMC and the external SD slot. FIXME: Since this board is not marketed by NVIDIA (Toshiba is the vendor, and Compal the ODM), this board should possibly be moved out of the board/nvidia directory. Signed-off-by: Stephen Warren <swarren@nvidia.com> --- MAINTAINERS | 1 + board/nvidia/paz00/Makefile | 41 ++++++++++++++++++++++ board/nvidia/paz00/paz00.c | 81 +++++++++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/paz00.h | 52 +++++++++++++++++++++++++++ 5 files changed, 176 insertions(+), 0 deletions(-) create mode 100644 board/nvidia/paz00/Makefile create mode 100644 board/nvidia/paz00/paz00.c create mode 100644 include/configs/paz00.h