diff mbox series

[2/2] PCI: qcom: Sort variants by Qcom IP rev

Message ID 20220722154919.1826027-3-helgaas@kernel.org
State New
Headers show
Series PCI: qcom: Minor cleanup | expand

Commit Message

Bjorn Helgaas July 22, 2022, 3:49 p.m. UTC
From: Bjorn Helgaas <bhelgaas@google.com>

Previously the variant resource structs, ops, etc., were in no obvious
order (mostly but not consistently in *Synopsys* IP rev order, which is not
reflected in the naming).

Reorder them in order of the struct and function names.  No functional
change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 732 ++++++++++++-------------
 1 file changed, 366 insertions(+), 366 deletions(-)

Comments

Johan Hovold July 26, 2022, 12:45 p.m. UTC | #1
On Fri, Jul 22, 2022 at 10:49:19AM -0500, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> Previously the variant resource structs, ops, etc., were in no obvious
> order (mostly but not consistently in *Synopsys* IP rev order, which is not
> reflected in the naming).
> 
> Reorder them in order of the struct and function names.  No functional
> change intended.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 732 ++++++++++++-------------
>  1 file changed, 366 insertions(+), 366 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index c27e3494179f..d0237d821323 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c

Moving code around like this makes code forensics harder as it messes up
git blame. At least the callbacks appears to be grouped by IP version
currently, so not sure how much you gain from moving the callbacks
around.

On the other hand, it looks like the patch doesn't touch the revision I
currently care about, so your call.

> -/* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
> -static const struct qcom_pcie_ops ops_2_1_0 = {
> -	.get_resources = qcom_pcie_get_resources_2_1_0,
> -	.init = qcom_pcie_init_2_1_0,
> -	.post_init = qcom_pcie_post_init_2_1_0,
> -	.deinit = qcom_pcie_deinit_2_1_0,
> -	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
> -};

Similar problem with git blame here, but at least this seems a bit more
warranted as these structs are small enough that you may actually search
manually among them.

> +static const struct qcom_pcie_cfg sm8150_cfg = {
> +	/* sm8150 has qcom IP rev 1.5.0. However 1.5.0 ops are same as
> +	 * 1.9.0, so reuse the same.
> +	 */
> +	.ops = &ops_1_9_0,
> +};

> +static const struct qcom_pcie_cfg sc8180x_cfg = {
> +	.ops = &ops_1_9_0,
> +	.has_tbu_clk = true,
> +};
> +
>  static const struct qcom_pcie_cfg ipq8064_cfg = {
>  	.ops = &ops_2_1_0,
>  };
> @@ -1626,42 +1662,6 @@ static const struct qcom_pcie_cfg sdm845_cfg = {
>  	.has_tbu_clk = true,
>  };
>  
> -static const struct qcom_pcie_cfg sm8150_cfg = {
> -	/* sm8150 has qcom IP rev 1.5.0. However 1.5.0 ops are same as
> -	 * 1.9.0, so reuse the same.
> -	 */
> -	.ops = &ops_1_9_0,
> -};

> -static const struct qcom_pcie_cfg sc8180x_cfg = {
> -	.ops = &ops_1_9_0,
> -	.has_tbu_clk = true,
> -};
> -
>  static const struct qcom_pcie_cfg ipq6018_cfg = {
>  	.ops = &ops_2_9_0,
>  };

But this bit I disagree with. Why sort the SoCs configurations by IP
revision, when what you typically need is to look them up by name?

Also note that this conflicts with my sc8280xp-support and IP-revision
series:

	https://lore.kernel.org/all/20220714071348.6792-1-johan+linaro@kernel.org/

The result of applying that series is that these structs are renamed
after the IP revision (and sorted alphabetically) so the end-result is
similar.

Could you consider dropping this patch, or at least the struct
qcom_pcie_cfg bits, and applying the above series for 5.20?

Or do I need to rebase on top first?

Johan
Bjorn Helgaas July 27, 2022, 10:02 p.m. UTC | #2
On Tue, Jul 26, 2022 at 02:45:34PM +0200, Johan Hovold wrote:
> On Fri, Jul 22, 2022 at 10:49:19AM -0500, Bjorn Helgaas wrote:
> > From: Bjorn Helgaas <bhelgaas@google.com>
> > 
> > Previously the variant resource structs, ops, etc., were in no obvious
> > order (mostly but not consistently in *Synopsys* IP rev order, which is not
> > reflected in the naming).
> > 
> > Reorder them in order of the struct and function names.  No functional
> > change intended.
> > 
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > ---
> >  drivers/pci/controller/dwc/pcie-qcom.c | 732 ++++++++++++-------------
> >  1 file changed, 366 insertions(+), 366 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index c27e3494179f..d0237d821323 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> 
> Moving code around like this makes code forensics harder as it messes up
> git blame. At least the callbacks appears to be grouped by IP version
> currently, so not sure how much you gain from moving the callbacks
> around.

The existing hodge-podge is sloppy and makes code reading harder for
everybody.  If we want them grouped by IP version, they should be
*named* by IP version.

> > -static const struct qcom_pcie_cfg sc8180x_cfg = {
> > -	.ops = &ops_1_9_0,
> > -	.has_tbu_clk = true,
> > -};
> > -
> >  static const struct qcom_pcie_cfg ipq6018_cfg = {
> >  	.ops = &ops_2_9_0,
> >  };
> 
> But this bit I disagree with. Why sort the SoCs configurations by IP
> revision, when what you typically need is to look them up by name?

Makes sense.

> Also note that this conflicts with my sc8280xp-support and IP-revision
> series:
> 
> 	https://lore.kernel.org/all/20220714071348.6792-1-johan+linaro@kernel.org/
> 
> The result of applying that series is that these structs are renamed
> after the IP revision (and sorted alphabetically) so the end-result is
> similar.
> 
> Could you consider dropping this patch, or at least the struct
> qcom_pcie_cfg bits, and applying the above series for 5.20?

I dropped it for now.  We can see how it shakes out after your series,
but not sure I'll get to it for this cycle.

Bjorn
Johan Hovold July 28, 2022, 12:26 p.m. UTC | #3
On Wed, Jul 27, 2022 at 05:02:20PM -0500, Bjorn Helgaas wrote:
> On Tue, Jul 26, 2022 at 02:45:34PM +0200, Johan Hovold wrote:
> > On Fri, Jul 22, 2022 at 10:49:19AM -0500, Bjorn Helgaas wrote:
> > > From: Bjorn Helgaas <bhelgaas@google.com>
> > > 
> > > Previously the variant resource structs, ops, etc., were in no obvious
> > > order (mostly but not consistently in *Synopsys* IP rev order, which is not
> > > reflected in the naming).
> > > 
> > > Reorder them in order of the struct and function names.  No functional
> > > change intended.
> > > 
> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > > ---
> > >  drivers/pci/controller/dwc/pcie-qcom.c | 732 ++++++++++++-------------
> > >  1 file changed, 366 insertions(+), 366 deletions(-)
> > > 
> > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > > index c27e3494179f..d0237d821323 100644
> > > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > 
> > Moving code around like this makes code forensics harder as it messes up
> > git blame. At least the callbacks appears to be grouped by IP version
> > currently, so not sure how much you gain from moving the callbacks
> > around.
> 
> The existing hodge-podge is sloppy and makes code reading harder for
> everybody.  If we want them grouped by IP version, they should be
> *named* by IP version.

But they are named by IP version. It's just that people didn't add these
groups of callbacks in IP version order. (And the fact that different IP
version share some of these callbacks between revisions doesn't help.)

But sure, adding support for a new version would be easier if there's an
obvious sorting of the callbacks (as long as people notice the order).

> > > -static const struct qcom_pcie_cfg sc8180x_cfg = {
> > > -	.ops = &ops_1_9_0,
> > > -	.has_tbu_clk = true,
> > > -};
> > > -
> > >  static const struct qcom_pcie_cfg ipq6018_cfg = {
> > >  	.ops = &ops_2_9_0,
> > >  };
> > 
> > But this bit I disagree with. Why sort the SoCs configurations by IP
> > revision, when what you typically need is to look them up by name?
> 
> Makes sense.
> 
> > Also note that this conflicts with my sc8280xp-support and IP-revision
> > series:
> > 
> > 	https://lore.kernel.org/all/20220714071348.6792-1-johan+linaro@kernel.org/
> > 
> > The result of applying that series is that these structs are renamed
> > after the IP revision (and sorted alphabetically) so the end-result is
> > similar.
> > 
> > Could you consider dropping this patch, or at least the struct
> > qcom_pcie_cfg bits, and applying the above series for 5.20?
> 
> I dropped it for now.  We can see how it shakes out after your series,
> but not sure I'll get to it for this cycle.

Ok. Thanks.

Johan
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index c27e3494179f..d0237d821323 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -118,17 +118,6 @@ 
 
 #define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
 
-struct qcom_pcie_resources_2_1_0 {
-	struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
-	struct reset_control *pci_reset;
-	struct reset_control *axi_reset;
-	struct reset_control *ahb_reset;
-	struct reset_control *por_reset;
-	struct reset_control *phy_reset;
-	struct reset_control *ext_reset;
-	struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
-};
-
 struct qcom_pcie_resources_1_0_0 {
 	struct clk *iface;
 	struct clk *aux;
@@ -138,6 +127,17 @@  struct qcom_pcie_resources_1_0_0 {
 	struct regulator *vdda;
 };
 
+struct qcom_pcie_resources_2_1_0 {
+	struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
+	struct reset_control *pci_reset;
+	struct reset_control *axi_reset;
+	struct reset_control *ahb_reset;
+	struct reset_control *por_reset;
+	struct reset_control *phy_reset;
+	struct reset_control *ext_reset;
+	struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
+};
+
 #define QCOM_PCIE_2_3_2_MAX_SUPPLY	2
 struct qcom_pcie_resources_2_3_2 {
 	struct clk *aux_clk;
@@ -147,6 +147,15 @@  struct qcom_pcie_resources_2_3_2 {
 	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
 };
 
+struct qcom_pcie_resources_2_3_3 {
+	struct clk *iface;
+	struct clk *axi_m_clk;
+	struct clk *axi_s_clk;
+	struct clk *ahb_clk;
+	struct clk *aux_clk;
+	struct reset_control *rst[7];
+};
+
 #define QCOM_PCIE_2_4_0_MAX_CLOCKS	4
 struct qcom_pcie_resources_2_4_0 {
 	struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS];
@@ -165,15 +174,6 @@  struct qcom_pcie_resources_2_4_0 {
 	struct reset_control *phy_ahb_reset;
 };
 
-struct qcom_pcie_resources_2_3_3 {
-	struct clk *iface;
-	struct clk *axi_m_clk;
-	struct clk *axi_s_clk;
-	struct clk *ahb_clk;
-	struct clk *aux_clk;
-	struct reset_control *rst[7];
-};
-
 /* 6 clocks typically, 7 for sm8250 */
 struct qcom_pcie_resources_2_7_0 {
 	struct clk_bulk_data clks[9];
@@ -254,6 +254,121 @@  static int qcom_pcie_start_link(struct dw_pcie *pci)
 	return 0;
 }
 
+static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+
+	res->vdda = devm_regulator_get(dev, "vdda");
+	if (IS_ERR(res->vdda))
+		return PTR_ERR(res->vdda);
+
+	res->iface = devm_clk_get(dev, "iface");
+	if (IS_ERR(res->iface))
+		return PTR_ERR(res->iface);
+
+	res->aux = devm_clk_get(dev, "aux");
+	if (IS_ERR(res->aux))
+		return PTR_ERR(res->aux);
+
+	res->master_bus = devm_clk_get(dev, "master_bus");
+	if (IS_ERR(res->master_bus))
+		return PTR_ERR(res->master_bus);
+
+	res->slave_bus = devm_clk_get(dev, "slave_bus");
+	if (IS_ERR(res->slave_bus))
+		return PTR_ERR(res->slave_bus);
+
+	res->core = devm_reset_control_get_exclusive(dev, "core");
+	return PTR_ERR_OR_ZERO(res->core);
+}
+
+static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
+
+	reset_control_assert(res->core);
+	clk_disable_unprepare(res->slave_bus);
+	clk_disable_unprepare(res->master_bus);
+	clk_disable_unprepare(res->iface);
+	clk_disable_unprepare(res->aux);
+	regulator_disable(res->vdda);
+}
+
+static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	int ret;
+
+	ret = reset_control_deassert(res->core);
+	if (ret) {
+		dev_err(dev, "cannot deassert core reset\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(res->aux);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable aux clock\n");
+		goto err_res;
+	}
+
+	ret = clk_prepare_enable(res->iface);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable iface clock\n");
+		goto err_aux;
+	}
+
+	ret = clk_prepare_enable(res->master_bus);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable master_bus clock\n");
+		goto err_iface;
+	}
+
+	ret = clk_prepare_enable(res->slave_bus);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable slave_bus clock\n");
+		goto err_master;
+	}
+
+	ret = regulator_enable(res->vdda);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda regulator\n");
+		goto err_slave;
+	}
+
+	return 0;
+err_slave:
+	clk_disable_unprepare(res->slave_bus);
+err_master:
+	clk_disable_unprepare(res->master_bus);
+err_iface:
+	clk_disable_unprepare(res->iface);
+err_aux:
+	clk_disable_unprepare(res->aux);
+err_res:
+	reset_control_assert(res->core);
+
+	return ret;
+}
+
+static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie)
+{
+	/* change DBI base address */
+	writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+
+		val |= BIT(31);
+		writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+	}
+
+	return 0;
+}
+
 static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
@@ -469,121 +584,6 @@  static int qcom_pcie_post_init_2_1_0(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
-	struct dw_pcie *pci = pcie->pci;
-	struct device *dev = pci->dev;
-
-	res->vdda = devm_regulator_get(dev, "vdda");
-	if (IS_ERR(res->vdda))
-		return PTR_ERR(res->vdda);
-
-	res->iface = devm_clk_get(dev, "iface");
-	if (IS_ERR(res->iface))
-		return PTR_ERR(res->iface);
-
-	res->aux = devm_clk_get(dev, "aux");
-	if (IS_ERR(res->aux))
-		return PTR_ERR(res->aux);
-
-	res->master_bus = devm_clk_get(dev, "master_bus");
-	if (IS_ERR(res->master_bus))
-		return PTR_ERR(res->master_bus);
-
-	res->slave_bus = devm_clk_get(dev, "slave_bus");
-	if (IS_ERR(res->slave_bus))
-		return PTR_ERR(res->slave_bus);
-
-	res->core = devm_reset_control_get_exclusive(dev, "core");
-	return PTR_ERR_OR_ZERO(res->core);
-}
-
-static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
-
-	reset_control_assert(res->core);
-	clk_disable_unprepare(res->slave_bus);
-	clk_disable_unprepare(res->master_bus);
-	clk_disable_unprepare(res->iface);
-	clk_disable_unprepare(res->aux);
-	regulator_disable(res->vdda);
-}
-
-static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
-	struct dw_pcie *pci = pcie->pci;
-	struct device *dev = pci->dev;
-	int ret;
-
-	ret = reset_control_deassert(res->core);
-	if (ret) {
-		dev_err(dev, "cannot deassert core reset\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(res->aux);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable aux clock\n");
-		goto err_res;
-	}
-
-	ret = clk_prepare_enable(res->iface);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable iface clock\n");
-		goto err_aux;
-	}
-
-	ret = clk_prepare_enable(res->master_bus);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable master_bus clock\n");
-		goto err_iface;
-	}
-
-	ret = clk_prepare_enable(res->slave_bus);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable slave_bus clock\n");
-		goto err_master;
-	}
-
-	ret = regulator_enable(res->vdda);
-	if (ret) {
-		dev_err(dev, "cannot enable vdda regulator\n");
-		goto err_slave;
-	}
-
-	return 0;
-err_slave:
-	clk_disable_unprepare(res->slave_bus);
-err_master:
-	clk_disable_unprepare(res->master_bus);
-err_iface:
-	clk_disable_unprepare(res->iface);
-err_aux:
-	clk_disable_unprepare(res->aux);
-err_res:
-	reset_control_assert(res->core);
-
-	return ret;
-}
-
-static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie)
-{
-	/* change DBI base address */
-	writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
-
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
-
-		val |= BIT(31);
-		writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
-	}
-
-	return 0;
-}
-
 static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
@@ -719,6 +719,174 @@  static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
 	return 0;
 }
 
+static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	int i;
+	const char *rst_names[] = { "axi_m", "axi_s", "pipe",
+				    "axi_m_sticky", "sticky",
+				    "ahb", "sleep", };
+
+	res->iface = devm_clk_get(dev, "iface");
+	if (IS_ERR(res->iface))
+		return PTR_ERR(res->iface);
+
+	res->axi_m_clk = devm_clk_get(dev, "axi_m");
+	if (IS_ERR(res->axi_m_clk))
+		return PTR_ERR(res->axi_m_clk);
+
+	res->axi_s_clk = devm_clk_get(dev, "axi_s");
+	if (IS_ERR(res->axi_s_clk))
+		return PTR_ERR(res->axi_s_clk);
+
+	res->ahb_clk = devm_clk_get(dev, "ahb");
+	if (IS_ERR(res->ahb_clk))
+		return PTR_ERR(res->ahb_clk);
+
+	res->aux_clk = devm_clk_get(dev, "aux");
+	if (IS_ERR(res->aux_clk))
+		return PTR_ERR(res->aux_clk);
+
+	for (i = 0; i < ARRAY_SIZE(rst_names); i++) {
+		res->rst[i] = devm_reset_control_get(dev, rst_names[i]);
+		if (IS_ERR(res->rst[i]))
+			return PTR_ERR(res->rst[i]);
+	}
+
+	return 0;
+}
+
+static void qcom_pcie_deinit_2_3_3(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
+
+	clk_disable_unprepare(res->iface);
+	clk_disable_unprepare(res->axi_m_clk);
+	clk_disable_unprepare(res->axi_s_clk);
+	clk_disable_unprepare(res->ahb_clk);
+	clk_disable_unprepare(res->aux_clk);
+}
+
+static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
+		ret = reset_control_assert(res->rst[i]);
+		if (ret) {
+			dev_err(dev, "reset #%d assert failed (%d)\n", i, ret);
+			return ret;
+		}
+	}
+
+	usleep_range(2000, 2500);
+
+	for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
+		ret = reset_control_deassert(res->rst[i]);
+		if (ret) {
+			dev_err(dev, "reset #%d deassert failed (%d)\n", i,
+				ret);
+			return ret;
+		}
+	}
+
+	/*
+	 * Don't have a way to see if the reset has completed.
+	 * Wait for some time.
+	 */
+	usleep_range(2000, 2500);
+
+	ret = clk_prepare_enable(res->iface);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable core clock\n");
+		goto err_clk_iface;
+	}
+
+	ret = clk_prepare_enable(res->axi_m_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable core clock\n");
+		goto err_clk_axi_m;
+	}
+
+	ret = clk_prepare_enable(res->axi_s_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable axi slave clock\n");
+		goto err_clk_axi_s;
+	}
+
+	ret = clk_prepare_enable(res->ahb_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable ahb clock\n");
+		goto err_clk_ahb;
+	}
+
+	ret = clk_prepare_enable(res->aux_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable aux clock\n");
+		goto err_clk_aux;
+	}
+
+	return 0;
+
+err_clk_aux:
+	clk_disable_unprepare(res->ahb_clk);
+err_clk_ahb:
+	clk_disable_unprepare(res->axi_s_clk);
+err_clk_axi_s:
+	clk_disable_unprepare(res->axi_m_clk);
+err_clk_axi_m:
+	clk_disable_unprepare(res->iface);
+err_clk_iface:
+	/*
+	 * Not checking for failure, will anyway return
+	 * the original failure in 'ret'.
+	 */
+	for (i = 0; i < ARRAY_SIZE(res->rst); i++)
+		reset_control_assert(res->rst[i]);
+
+	return ret;
+}
+
+static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
+{
+	struct dw_pcie *pci = pcie->pci;
+	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	u32 val;
+
+	writel(SLV_ADDR_SPACE_SZ,
+		pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
+
+	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+	val &= ~BIT(0);
+	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
+	writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+	writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS
+		| SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
+		AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
+		pcie->parf + PCIE20_PARF_SYS_CTRL);
+	writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
+
+	writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
+	writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
+	writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
+
+	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
+	val &= ~PCI_EXP_LNKCAP_ASPMS;
+	writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
+
+	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
+		PCI_EXP_DEVCTL2);
+
+	return 0;
+}
+
 static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
@@ -998,174 +1166,6 @@  static int qcom_pcie_post_init_2_4_0(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
-	struct dw_pcie *pci = pcie->pci;
-	struct device *dev = pci->dev;
-	int i;
-	const char *rst_names[] = { "axi_m", "axi_s", "pipe",
-				    "axi_m_sticky", "sticky",
-				    "ahb", "sleep", };
-
-	res->iface = devm_clk_get(dev, "iface");
-	if (IS_ERR(res->iface))
-		return PTR_ERR(res->iface);
-
-	res->axi_m_clk = devm_clk_get(dev, "axi_m");
-	if (IS_ERR(res->axi_m_clk))
-		return PTR_ERR(res->axi_m_clk);
-
-	res->axi_s_clk = devm_clk_get(dev, "axi_s");
-	if (IS_ERR(res->axi_s_clk))
-		return PTR_ERR(res->axi_s_clk);
-
-	res->ahb_clk = devm_clk_get(dev, "ahb");
-	if (IS_ERR(res->ahb_clk))
-		return PTR_ERR(res->ahb_clk);
-
-	res->aux_clk = devm_clk_get(dev, "aux");
-	if (IS_ERR(res->aux_clk))
-		return PTR_ERR(res->aux_clk);
-
-	for (i = 0; i < ARRAY_SIZE(rst_names); i++) {
-		res->rst[i] = devm_reset_control_get(dev, rst_names[i]);
-		if (IS_ERR(res->rst[i]))
-			return PTR_ERR(res->rst[i]);
-	}
-
-	return 0;
-}
-
-static void qcom_pcie_deinit_2_3_3(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
-
-	clk_disable_unprepare(res->iface);
-	clk_disable_unprepare(res->axi_m_clk);
-	clk_disable_unprepare(res->axi_s_clk);
-	clk_disable_unprepare(res->ahb_clk);
-	clk_disable_unprepare(res->aux_clk);
-}
-
-static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
-	struct dw_pcie *pci = pcie->pci;
-	struct device *dev = pci->dev;
-	int i, ret;
-
-	for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
-		ret = reset_control_assert(res->rst[i]);
-		if (ret) {
-			dev_err(dev, "reset #%d assert failed (%d)\n", i, ret);
-			return ret;
-		}
-	}
-
-	usleep_range(2000, 2500);
-
-	for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
-		ret = reset_control_deassert(res->rst[i]);
-		if (ret) {
-			dev_err(dev, "reset #%d deassert failed (%d)\n", i,
-				ret);
-			return ret;
-		}
-	}
-
-	/*
-	 * Don't have a way to see if the reset has completed.
-	 * Wait for some time.
-	 */
-	usleep_range(2000, 2500);
-
-	ret = clk_prepare_enable(res->iface);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable core clock\n");
-		goto err_clk_iface;
-	}
-
-	ret = clk_prepare_enable(res->axi_m_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable core clock\n");
-		goto err_clk_axi_m;
-	}
-
-	ret = clk_prepare_enable(res->axi_s_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable axi slave clock\n");
-		goto err_clk_axi_s;
-	}
-
-	ret = clk_prepare_enable(res->ahb_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable ahb clock\n");
-		goto err_clk_ahb;
-	}
-
-	ret = clk_prepare_enable(res->aux_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable aux clock\n");
-		goto err_clk_aux;
-	}
-
-	return 0;
-
-err_clk_aux:
-	clk_disable_unprepare(res->ahb_clk);
-err_clk_ahb:
-	clk_disable_unprepare(res->axi_s_clk);
-err_clk_axi_s:
-	clk_disable_unprepare(res->axi_m_clk);
-err_clk_axi_m:
-	clk_disable_unprepare(res->iface);
-err_clk_iface:
-	/*
-	 * Not checking for failure, will anyway return
-	 * the original failure in 'ret'.
-	 */
-	for (i = 0; i < ARRAY_SIZE(res->rst); i++)
-		reset_control_assert(res->rst[i]);
-
-	return ret;
-}
-
-static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
-{
-	struct dw_pcie *pci = pcie->pci;
-	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
-	u32 val;
-
-	writel(SLV_ADDR_SPACE_SZ,
-		pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
-
-	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-	val &= ~BIT(0);
-	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-
-	writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
-
-	writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS
-		| SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
-		AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
-		pcie->parf + PCIE20_PARF_SYS_CTRL);
-	writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
-
-	writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
-	writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
-	writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
-
-	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
-	val &= ~PCI_EXP_LNKCAP_ASPMS;
-	writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
-
-	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
-		PCI_EXP_DEVCTL2);
-
-	return 0;
-}
-
 static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
@@ -1530,15 +1530,6 @@  static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
 	.host_init = qcom_pcie_host_init,
 };
 
-/* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
-static const struct qcom_pcie_ops ops_2_1_0 = {
-	.get_resources = qcom_pcie_get_resources_2_1_0,
-	.init = qcom_pcie_init_2_1_0,
-	.post_init = qcom_pcie_post_init_2_1_0,
-	.deinit = qcom_pcie_deinit_2_1_0,
-	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
-};
-
 /* Qcom IP rev.: 1.0.0	Synopsys IP rev.: 4.11a */
 static const struct qcom_pcie_ops ops_1_0_0 = {
 	.get_resources = qcom_pcie_get_resources_1_0_0,
@@ -1548,6 +1539,24 @@  static const struct qcom_pcie_ops ops_1_0_0 = {
 	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
 };
 
+/* Qcom IP rev.: 1.9.0 */
+static const struct qcom_pcie_ops ops_1_9_0 = {
+	.get_resources = qcom_pcie_get_resources_2_7_0,
+	.init = qcom_pcie_init_2_7_0,
+	.deinit = qcom_pcie_deinit_2_7_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+	.config_sid = qcom_pcie_config_sid_sm8250,
+};
+
+/* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
+static const struct qcom_pcie_ops ops_2_1_0 = {
+	.get_resources = qcom_pcie_get_resources_2_1_0,
+	.init = qcom_pcie_init_2_1_0,
+	.post_init = qcom_pcie_post_init_2_1_0,
+	.deinit = qcom_pcie_deinit_2_1_0,
+	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
+};
+
 /* Qcom IP rev.: 2.3.2	Synopsys IP rev.: 4.21a */
 static const struct qcom_pcie_ops ops_2_3_2 = {
 	.get_resources = qcom_pcie_get_resources_2_3_2,
@@ -1557,15 +1566,6 @@  static const struct qcom_pcie_ops ops_2_3_2 = {
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
-/* Qcom IP rev.: 2.4.0	Synopsys IP rev.: 4.20a */
-static const struct qcom_pcie_ops ops_2_4_0 = {
-	.get_resources = qcom_pcie_get_resources_2_4_0,
-	.init = qcom_pcie_init_2_4_0,
-	.post_init = qcom_pcie_post_init_2_4_0,
-	.deinit = qcom_pcie_deinit_2_4_0,
-	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-};
-
 /* Qcom IP rev.: 2.3.3	Synopsys IP rev.: 4.30a */
 static const struct qcom_pcie_ops ops_2_3_3 = {
 	.get_resources = qcom_pcie_get_resources_2_3_3,
@@ -1575,6 +1575,15 @@  static const struct qcom_pcie_ops ops_2_3_3 = {
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
+/* Qcom IP rev.: 2.4.0	Synopsys IP rev.: 4.20a */
+static const struct qcom_pcie_ops ops_2_4_0 = {
+	.get_resources = qcom_pcie_get_resources_2_4_0,
+	.init = qcom_pcie_init_2_4_0,
+	.post_init = qcom_pcie_post_init_2_4_0,
+	.deinit = qcom_pcie_deinit_2_4_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
 /* Qcom IP rev.: 2.7.0	Synopsys IP rev.: 4.30a */
 static const struct qcom_pcie_ops ops_2_7_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
@@ -1583,15 +1592,6 @@  static const struct qcom_pcie_ops ops_2_7_0 = {
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
-/* Qcom IP rev.: 1.9.0 */
-static const struct qcom_pcie_ops ops_1_9_0 = {
-	.get_resources = qcom_pcie_get_resources_2_7_0,
-	.init = qcom_pcie_init_2_7_0,
-	.deinit = qcom_pcie_deinit_2_7_0,
-	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.config_sid = qcom_pcie_config_sid_sm8250,
-};
-
 /* Qcom IP rev.: 2.9.0  Synopsys IP rev.: 5.00a */
 static const struct qcom_pcie_ops ops_2_9_0 = {
 	.get_resources = qcom_pcie_get_resources_2_9_0,
@@ -1605,6 +1605,42 @@  static const struct qcom_pcie_cfg apq8084_cfg = {
 	.ops = &ops_1_0_0,
 };
 
+static const struct qcom_pcie_cfg sm8150_cfg = {
+	/* sm8150 has qcom IP rev 1.5.0. However 1.5.0 ops are same as
+	 * 1.9.0, so reuse the same.
+	 */
+	.ops = &ops_1_9_0,
+};
+
+static const struct qcom_pcie_cfg sm8250_cfg = {
+	.ops = &ops_1_9_0,
+	.has_tbu_clk = true,
+	.has_ddrss_sf_tbu_clk = true,
+};
+
+static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
+	.ops = &ops_1_9_0,
+	.has_ddrss_sf_tbu_clk = true,
+	.has_aggre0_clk = true,
+	.has_aggre1_clk = true,
+};
+
+static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
+	.ops = &ops_1_9_0,
+	.has_ddrss_sf_tbu_clk = true,
+	.has_aggre1_clk = true,
+};
+
+static const struct qcom_pcie_cfg sc7280_cfg = {
+	.ops = &ops_1_9_0,
+	.has_tbu_clk = true,
+};
+
+static const struct qcom_pcie_cfg sc8180x_cfg = {
+	.ops = &ops_1_9_0,
+	.has_tbu_clk = true,
+};
+
 static const struct qcom_pcie_cfg ipq8064_cfg = {
 	.ops = &ops_2_1_0,
 };
@@ -1626,42 +1662,6 @@  static const struct qcom_pcie_cfg sdm845_cfg = {
 	.has_tbu_clk = true,
 };
 
-static const struct qcom_pcie_cfg sm8150_cfg = {
-	/* sm8150 has qcom IP rev 1.5.0. However 1.5.0 ops are same as
-	 * 1.9.0, so reuse the same.
-	 */
-	.ops = &ops_1_9_0,
-};
-
-static const struct qcom_pcie_cfg sm8250_cfg = {
-	.ops = &ops_1_9_0,
-	.has_tbu_clk = true,
-	.has_ddrss_sf_tbu_clk = true,
-};
-
-static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
-	.ops = &ops_1_9_0,
-	.has_ddrss_sf_tbu_clk = true,
-	.has_aggre0_clk = true,
-	.has_aggre1_clk = true,
-};
-
-static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
-	.ops = &ops_1_9_0,
-	.has_ddrss_sf_tbu_clk = true,
-	.has_aggre1_clk = true,
-};
-
-static const struct qcom_pcie_cfg sc7280_cfg = {
-	.ops = &ops_1_9_0,
-	.has_tbu_clk = true,
-};
-
-static const struct qcom_pcie_cfg sc8180x_cfg = {
-	.ops = &ops_1_9_0,
-	.has_tbu_clk = true,
-};
-
 static const struct qcom_pcie_cfg ipq6018_cfg = {
 	.ops = &ops_2_9_0,
 };