diff mbox

[U-Boot,02/13] board/evb64260/i2c.c: Coding Style cleanup

Message ID 1320866946-28235-2-git-send-email-wd@denx.de
State Accepted
Commit fecf63e41e73ad5fc1d941d7eefc7338f7c34edd
Headers show

Commit Message

Wolfgang Denk Nov. 9, 2011, 7:28 p.m. UTC 
Make checkpatch-clean

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Eran Man <eran@nbase.co.il>
---
 board/evb64260/i2c.c |   48 ++++++++++++++++++++++--------------------------
 1 files changed, 22 insertions(+), 26 deletions(-)

Comments

Heiko Schocher Nov. 10, 2011, 6:32 a.m. UTC | #1 
Hello Wolfgang,

Wolfgang Denk wrote:
> Make checkpatch-clean
> 
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Eran Man <eran@nbase.co.il>
> ---
>  board/evb64260/i2c.c |   48 ++++++++++++++++++++++--------------------------
>  1 files changed, 22 insertions(+), 26 deletions(-)
> 
> diff --git a/board/evb64260/i2c.c b/board/evb64260/i2c.c
> index 88d0dac..573f31f 100644
> --- a/board/evb64260/i2c.c
> +++ b/board/evb64260/i2c.c
> @@ -20,25 +20,22 @@ static void
>  i2c_init(int speed, int slaveaddr)
>  {
>  	unsigned int n, m, freq, margin, power;
> -	unsigned int actualFreq, actualN=0, actualM=0;
> +	unsigned int actualFreq, actualN = 0, actualM = 0;

Hmm.. we don't use Upper and Lower case mixed for variable names.
This should be cleanuped too.

bye,
Heiko
Wolfgang Denk Nov. 16, 2011, 8:03 p.m. UTC | #2 
Dear Heiko Schocher,

In message <4EBB6FF4.5060105@denx.de> you wrote:
> 
> > Make checkpatch-clean
...
> > -	unsigned int actualFreq, actualN=0, actualM=0;
> > +	unsigned int actualFreq, actualN = 0, actualM = 0;
> 
> Hmm.. we don't use Upper and Lower case mixed for variable names.
> This should be cleanuped too.

Yes, you are right.  I didn't have time to do that.  Patches welcome.

Best regards,

Wolfgang Denk
Wolfgang Denk Nov. 16, 2011, 8:03 p.m. UTC | #3 
Dear Wolfgang Denk,

In message <1320866946-28235-2-git-send-email-wd@denx.de> you wrote:
> Make checkpatch-clean
> 
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Eran Man <eran@nbase.co.il>
> ---
>  board/evb64260/i2c.c |   48 ++++++++++++++++++++++--------------------------
>  1 files changed, 22 insertions(+), 26 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk
diff mbox

Patch

diff --git a/board/evb64260/i2c.c b/board/evb64260/i2c.c
index 88d0dac..573f31f 100644
--- a/board/evb64260/i2c.c
+++ b/board/evb64260/i2c.c
@@ -20,25 +20,22 @@  static void
 i2c_init(int speed, int slaveaddr)
 {
 	unsigned int n, m, freq, margin, power;
-	unsigned int actualFreq, actualN=0, actualM=0;
+	unsigned int actualFreq, actualN = 0, actualM = 0;
 	unsigned int control, status;
 	unsigned int minMargin = 0xffffffff;
 	unsigned int tclk = 125000000;
 
 	DP(puts("i2c_init\n"));
 
-	for(n = 0 ; n < 8 ; n++)
-	{
-		for(m = 0 ; m < 16 ; m++)
-		{
+	for (n = 0 ; n < 8 ; n++) {
+		for (m = 0 ; m < 16 ; m++) {
 			power = 2<<n; /* power = 2^(n+1) */
 			freq = tclk/(10*(m+1)*power);
 			if (speed > freq)
 				margin = speed - freq;
 			else
 				margin = freq - speed;
-			if(margin < minMargin)
-			{
+			if (margin < minMargin) {
 				minMargin   = margin;
 				actualFreq  = freq;
 				actualN	    = n;
@@ -91,13 +88,13 @@  i2c_start(void)
 		udelay(I2C_DELAY);
 		if (count > 20) {
 			GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-			return (status);
+			return status;
 		}
 		GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 		count++;
 	}
 
-	return (0);
+	return 0;
 }
 
 static uchar
@@ -110,9 +107,8 @@  i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
 
 	/* Output slave address */
 
-	if (ten_bit) {
+	if (ten_bit)
 		bits = 10;
-	}
 
 	data = (dev_addr << 1);
 	/* set the read bit */
@@ -129,7 +125,7 @@  i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
 		udelay(I2C_DELAY);
 		if (count > 20) {
 			GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-			return(status);
+			return status;
 		}
 		GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 		count++;
@@ -137,14 +133,14 @@  i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
 
 	if (bits == 10) {
 		printf("10 bit I2C addressing not yet implemented\n");
-		return (0xff);
+		return 0xff;
 	}
 
-	return (0);
+	return 0;
 }
 
 static uchar
-i2c_get_data(uchar* return_data, int len) {
+i2c_get_data(uchar *return_data, int len) {
 
 	unsigned int data, status = 0;
 	int count = 0;
@@ -163,7 +159,7 @@  i2c_get_data(uchar* return_data, int len) {
 		count++;
 		while ((status & 0xff) != 0x50) {
 			udelay(I2C_DELAY);
-			if(count > 2) {
+			if (count > 2) {
 				GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
 				return 0;
 			}
@@ -178,16 +174,16 @@  i2c_get_data(uchar* return_data, int len) {
 	RESET_REG_BITS(I2C_CONTROL, BIT2|BIT3);
 	while ((status & 0xff) != 0x58) {
 		udelay(I2C_DELAY);
-		if(count > 200) {
+		if (count > 200) {
 			GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-			return (status);
+			return status;
 		}
 		GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 		count++;
 	}
 	GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /* stop */
 
-	return (0);
+	return 0;
 }
 
 static uchar
@@ -213,9 +209,9 @@  i2c_write_data(unsigned int data, int len)
 		count++;
 		while ((status & 0xff) != 0x28) {
 			udelay(I2C_DELAY);
-			if(count > 20) {
+			if (count > 20) {
 				GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-				return (status);
+				return status;
 			}
 			GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 			count++;
@@ -227,7 +223,7 @@  i2c_write_data(unsigned int data, int len)
 
 	udelay(I2C_DELAY * 10);
 
-	return (0);
+	return 0;
 }
 
 static uchar
@@ -254,11 +250,11 @@  i2c_set_dev_offset(uchar dev_addr, unsigned int offset, int ten_bit)
 		return status;
 	}
 
-	return (0);
+	return 0;
 }
 
 uchar
-i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
+i2c_read(uchar dev_addr, unsigned int offset, int len, uchar *data,
 	 int ten_bit)
 {
 	uchar status = 0;
@@ -266,7 +262,7 @@  i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
 
 	DP(puts("i2c_read\n"));
 
-	i2c_init(i2cFreq,0);
+	i2c_init(i2cFreq, 0);
 
 	status = i2c_start();
 
@@ -285,7 +281,7 @@  i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
 		return status;
 	}
 
-	i2c_init(i2cFreq,0);
+	i2c_init(i2cFreq, 0);
 
 	status = i2c_start();
 	if (status) {