diff mbox series

[v3,1/3] firmware: Add boot information to sysfs

Message ID 20220204072234.304543-2-joel@jms.id.au
State New
Headers show
Series firmware: Add boot information to sysfs | expand

Commit Message

Joel Stanley Feb. 4, 2022, 7:22 a.m. UTC
Machines often have firmware that perform some action before Linux is
loaded. It's useful to know how this firmware is configured, so create a
sysfs directory and some properties that a system can choose to expose
to describe how the system was started.

Currently the intended use describes four files, relating to hardware
root of trust configuration.

These properties are populated by platform code at startup. Using fixed
values is suitable as the state that the system booted in will not
change after firmware has handed over.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v2:
 - Rewrite so properties are present in common code and are exposed based
   on the is_visible callback.
 - Use sysfs_emit
v3:
 - drop uart_boot
 - Add kerneldoc to header
 - Rename en -> present
 - Rename val -> value
 - Drop unncessary __init from header
 - Wrap macro in do { } while(0)
---
 .../ABI/testing/sysfs-firmware-bootinfo       | 37 +++++++++
 drivers/base/firmware.c                       | 80 +++++++++++++++++++
 include/linux/firmware_bootinfo.h             | 48 +++++++++++
 3 files changed, 165 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-firmware-bootinfo
 create mode 100644 include/linux/firmware_bootinfo.h

Comments

Greg KH April 22, 2022, 6:46 a.m. UTC | #1
On Fri, Feb 04, 2022 at 05:52:32PM +1030, Joel Stanley wrote:
> Machines often have firmware that perform some action before Linux is
> loaded. It's useful to know how this firmware is configured, so create a
> sysfs directory and some properties that a system can choose to expose
> to describe how the system was started.
> 
> Currently the intended use describes four files, relating to hardware
> root of trust configuration.
> 
> These properties are populated by platform code at startup. Using fixed
> values is suitable as the state that the system booted in will not
> change after firmware has handed over.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> v2:
>  - Rewrite so properties are present in common code and are exposed based
>    on the is_visible callback.
>  - Use sysfs_emit
> v3:
>  - drop uart_boot
>  - Add kerneldoc to header
>  - Rename en -> present
>  - Rename val -> value
>  - Drop unncessary __init from header
>  - Wrap macro in do { } while(0)
> ---
>  .../ABI/testing/sysfs-firmware-bootinfo       | 37 +++++++++
>  drivers/base/firmware.c                       | 80 +++++++++++++++++++
>  include/linux/firmware_bootinfo.h             | 48 +++++++++++
>  3 files changed, 165 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-firmware-bootinfo
>  create mode 100644 include/linux/firmware_bootinfo.h
> 
> diff --git a/Documentation/ABI/testing/sysfs-firmware-bootinfo b/Documentation/ABI/testing/sysfs-firmware-bootinfo
> new file mode 100644
> index 000000000000..cd8eeaa49a00
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-firmware-bootinfo
> @@ -0,0 +1,37 @@
> +What:		/sys/firmware/bootinfo/*
> +Date:		Jan 2022

It isn't January anymore :)

> +Description:
> +		A system can expose information about how it was started in
> +		this directory.

I do not understand what you mean by "how it was started".

> +		This information is agnostic as to the firmware implementation.

How?  This should be very firmware specific.

> +
> +		A system may expose a subset of these properties as applicable.
> +
> +
> +What:		/sys/firmware/bootinfo/secure_boot
> +Date:		Jan 2022
> +Description:
> +		Indicates the system was started with secure boot enabled in
> +		the firmware.

What are the valid values of this file?

If this file is not present what does that mean?

> +
> +
> +What:		/sys/firmware/bootinfo/abr_image
> +Date:		Jan 2022
> +Description:
> +		Indicates the system was started from the alternate image
> +		loaded from an Alternate Boot Region. Often this is a result of
> +		the primary firmware image failing to start the system.

What are the valid values here?


> +
> +
> +What:		/sys/firmware/bootinfo/low_security_key
> +Date:		Jan 2022
> +Description:
> +		Indicates the system's secure boot was verified with a low
> +		security or development key.

What is a "low security" key?  What is a "development key"?  What are
the valid values here?

> +
> +What:		/sys/firmware/bootinfo/otp_protected
> +Date:		Jan 2022
> +Description:
> +		Indicates the system's boot configuration region is write
> +		protected and cannot be modified.

What are the valid values here?


> diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c
> index 8dff940e0db9..8d1a7a36784c 100644
> --- a/drivers/base/firmware.c
> +++ b/drivers/base/firmware.c
> @@ -11,6 +11,7 @@
>  #include <linux/module.h>
>  #include <linux/init.h>
>  #include <linux/device.h>
> +#include <linux/firmware_bootinfo.h>
>  
>  #include "base.h"
>  
> @@ -24,3 +25,82 @@ int __init firmware_init(void)
>  		return -ENOMEM;
>  	return 0;
>  }
> +
> +/*
> + * Exposes attributes documented in Documentation/ABI/testing/sysfs-firmware-bootinfo
> + */
> +static struct bootinfo bootinfo;
> +
> +static ssize_t abr_image_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.abr_image.value);
> +}
> +static DEVICE_ATTR_RO(abr_image);
> +
> +static ssize_t low_security_key_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.low_security_key.value);
> +}
> +static DEVICE_ATTR_RO(low_security_key);
> +
> +static ssize_t otp_protected_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.otp_protected.value);
> +}
> +static DEVICE_ATTR_RO(otp_protected);
> +
> +static ssize_t secure_boot_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.secure_boot.value);
> +}
> +static DEVICE_ATTR_RO(secure_boot);
> +
> +#define ATTR_ENABLED(a) ((attr == &dev_attr_##a.attr) && bootinfo.a.present)
> +
> +static umode_t bootinfo_attr_mode(struct kobject *kobj, struct attribute *attr, int index)
> +{
> +	if (ATTR_ENABLED(abr_image))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(otp_protected))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(low_security_key))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(otp_protected))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(low_security_key))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(secure_boot))
> +		return 0444;
> +
> +	return 0;
> +}
> +
> +static struct attribute *bootinfo_attrs[] = {
> +	&dev_attr_abr_image.attr,
> +	&dev_attr_low_security_key.attr,
> +	&dev_attr_otp_protected.attr,
> +	&dev_attr_secure_boot.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group bootinfo_attr_group = {
> +	.attrs = bootinfo_attrs,
> +	.is_visible = bootinfo_attr_mode,
> +};
> +
> +int __init firmware_bootinfo_init(struct bootinfo *bootinfo_init)
> +{
> +	struct kobject *kobj = kobject_create_and_add("bootinfo", firmware_kobj);
> +	if (!kobj)
> +		return -ENOMEM;
> +
> +	memcpy(&bootinfo, bootinfo_init, sizeof(bootinfo));
> +
> +	return sysfs_create_group(kobj, &bootinfo_attr_group);

If creating the group fails, shouldn't you remove the kobject?

thanks,

greg k-h
Arnd Bergmann April 22, 2022, 9:05 a.m. UTC | #2
On Fri, Apr 22, 2022 at 8:46 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> On Fri, Feb 04, 2022 at 05:52:32PM +1030, Joel Stanley wrote:
> > +What:                /sys/firmware/bootinfo/*
> > +Date:                Jan 2022
>
> It isn't January anymore :)

The patch was sent on Feb 4, I would expect that to be close enough. Does this
need to be the month of the kernel release it is merged into instead?

> > +Description:
> > +             A system can expose information about how it was started in
> > +             this directory.
>
> I do not understand what you mean by "how it was started".
>
> > +             This information is agnostic as to the firmware implementation.
>
> How?  This should be very firmware specific.

The original patch was specific to a particular SoC vendor. Since the
information provided here is fairly generic in the end, I asked for
the interface
to be generalized to the point that it can be reused across multiple
vendors and architectures.

      Arnd
Greg KH April 22, 2022, 12:26 p.m. UTC | #3
On Fri, Apr 22, 2022 at 11:05:46AM +0200, Arnd Bergmann wrote:
> On Fri, Apr 22, 2022 at 8:46 AM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > On Fri, Feb 04, 2022 at 05:52:32PM +1030, Joel Stanley wrote:
> > > +What:                /sys/firmware/bootinfo/*
> > > +Date:                Jan 2022
> >
> > It isn't January anymore :)
> 
> The patch was sent on Feb 4, I would expect that to be close enough. Does this
> need to be the month of the kernel release it is merged into instead?

That's usually best, but at least the month the patch was sent in is
good.

Also I notice there's no "who is responsible for this" entry here.

> 
> > > +Description:
> > > +             A system can expose information about how it was started in
> > > +             this directory.
> >
> > I do not understand what you mean by "how it was started".
> >
> > > +             This information is agnostic as to the firmware implementation.
> >
> > How?  This should be very firmware specific.
> 
> The original patch was specific to a particular SoC vendor. Since the
> information provided here is fairly generic in the end, I asked for
> the interface
> to be generalized to the point that it can be reused across multiple
> vendors and architectures.

Ok, and is that what this interface provides?

thanks,

greg k-h
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-firmware-bootinfo b/Documentation/ABI/testing/sysfs-firmware-bootinfo
new file mode 100644
index 000000000000..cd8eeaa49a00
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-bootinfo
@@ -0,0 +1,37 @@ 
+What:		/sys/firmware/bootinfo/*
+Date:		Jan 2022
+Description:
+		A system can expose information about how it was started in
+		this directory.
+
+		This information is agnostic as to the firmware implementation.
+
+		A system may expose a subset of these properties as applicable.
+
+
+What:		/sys/firmware/bootinfo/secure_boot
+Date:		Jan 2022
+Description:
+		Indicates the system was started with secure boot enabled in
+		the firmware.
+
+
+What:		/sys/firmware/bootinfo/abr_image
+Date:		Jan 2022
+Description:
+		Indicates the system was started from the alternate image
+		loaded from an Alternate Boot Region. Often this is a result of
+		the primary firmware image failing to start the system.
+
+
+What:		/sys/firmware/bootinfo/low_security_key
+Date:		Jan 2022
+Description:
+		Indicates the system's secure boot was verified with a low
+		security or development key.
+
+What:		/sys/firmware/bootinfo/otp_protected
+Date:		Jan 2022
+Description:
+		Indicates the system's boot configuration region is write
+		protected and cannot be modified.
diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c
index 8dff940e0db9..8d1a7a36784c 100644
--- a/drivers/base/firmware.c
+++ b/drivers/base/firmware.c
@@ -11,6 +11,7 @@ 
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/firmware_bootinfo.h>
 
 #include "base.h"
 
@@ -24,3 +25,82 @@  int __init firmware_init(void)
 		return -ENOMEM;
 	return 0;
 }
+
+/*
+ * Exposes attributes documented in Documentation/ABI/testing/sysfs-firmware-bootinfo
+ */
+static struct bootinfo bootinfo;
+
+static ssize_t abr_image_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%d\n", bootinfo.abr_image.value);
+}
+static DEVICE_ATTR_RO(abr_image);
+
+static ssize_t low_security_key_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%d\n", bootinfo.low_security_key.value);
+}
+static DEVICE_ATTR_RO(low_security_key);
+
+static ssize_t otp_protected_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%d\n", bootinfo.otp_protected.value);
+}
+static DEVICE_ATTR_RO(otp_protected);
+
+static ssize_t secure_boot_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sysfs_emit(buf, "%d\n", bootinfo.secure_boot.value);
+}
+static DEVICE_ATTR_RO(secure_boot);
+
+#define ATTR_ENABLED(a) ((attr == &dev_attr_##a.attr) && bootinfo.a.present)
+
+static umode_t bootinfo_attr_mode(struct kobject *kobj, struct attribute *attr, int index)
+{
+	if (ATTR_ENABLED(abr_image))
+		return 0444;
+
+	if (ATTR_ENABLED(otp_protected))
+		return 0444;
+
+	if (ATTR_ENABLED(low_security_key))
+		return 0444;
+
+	if (ATTR_ENABLED(otp_protected))
+		return 0444;
+
+	if (ATTR_ENABLED(low_security_key))
+		return 0444;
+
+	if (ATTR_ENABLED(secure_boot))
+		return 0444;
+
+	return 0;
+}
+
+static struct attribute *bootinfo_attrs[] = {
+	&dev_attr_abr_image.attr,
+	&dev_attr_low_security_key.attr,
+	&dev_attr_otp_protected.attr,
+	&dev_attr_secure_boot.attr,
+	NULL,
+};
+
+static const struct attribute_group bootinfo_attr_group = {
+	.attrs = bootinfo_attrs,
+	.is_visible = bootinfo_attr_mode,
+};
+
+int __init firmware_bootinfo_init(struct bootinfo *bootinfo_init)
+{
+	struct kobject *kobj = kobject_create_and_add("bootinfo", firmware_kobj);
+	if (!kobj)
+		return -ENOMEM;
+
+	memcpy(&bootinfo, bootinfo_init, sizeof(bootinfo));
+
+	return sysfs_create_group(kobj, &bootinfo_attr_group);
+}
+EXPORT_SYMBOL_GPL(firmware_bootinfo_init);
diff --git a/include/linux/firmware_bootinfo.h b/include/linux/firmware_bootinfo.h
new file mode 100644
index 000000000000..237da83b673c
--- /dev/null
+++ b/include/linux/firmware_bootinfo.h
@@ -0,0 +1,48 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright 2022 IBM Corp. */
+
+#include <linux/sysfs.h>
+#include <linux/init.h>
+
+#define BOOTINFO_SET(b, n, v) do {b.n.present = true; b.n.value = v; } while (0)
+
+/**
+ * struct bootinfo_entry - A bootinfo sysfs entry
+ * @present: true if the file should be present (visible) in sysfs
+ * @value: value of the entry, will be printed as 1 or 0
+ *
+ * Contains the state of a given bootinfo sysfs file, to be filled out by the
+ * platform that wishes it to be present.
+ *
+ * It is used by sysfs. The is_present callback tests .present indicate the
+ * attribute should be shown, and by the show callback tests .value to display
+ * the value.
+ */
+struct bootinfo_entry {
+	bool present;
+	bool value;
+};
+
+/**
+ * struct bootinfo: A collection of bootinfo entries
+ * @abr_image: sysfs property
+ * @low_security_key: sysfs property
+ * @otp_protected: sysfs property
+ * @secure_boot: sysfs property
+ *
+ * The documented set of bootinfo entries to be displayed in
+ * /sys/firmware/bootinfo. Platform code populates a struct bootinfo and
+ * passes it to firmware_bootinfo_init, which takes a copy to be used at
+ * runtime.
+ *
+ * See struct bootinfo_entry for a description of the information each entry
+ * contiains.
+ */
+struct bootinfo {
+	struct bootinfo_entry abr_image;
+	struct bootinfo_entry low_security_key;
+	struct bootinfo_entry otp_protected;
+	struct bootinfo_entry secure_boot;
+};
+
+int firmware_bootinfo_init(struct bootinfo *bootinfo_init);