Message ID | 4EA9BB69.8050602@aribaud.net |
---|---|
State | Accepted |
Headers | show |
Dear Albert ARIBAUD, In message <4EA9BB69.8050602@aribaud.net> you wrote: > Hi Wolfgang, > > The following changes since commit c30a15e590c7e5bfd27e4704c81648071f11d51f: > > FAT: Add FAT write feature (2011-10-26 21:40:44 +0200) > > are available in the git repository at: > git://git.denx.de/u-boot-arm master > > Ajay Bhargav (4): > SPI: Add SPI driver support for Marvell Armada100 > Armada100: Add SPI support for Marvell gplugD > Armada100: Add SPI flash support for Marvell gplugD > Armada100: Add env storage support for Marvell gplugD > > Aneesh V (1): > omap: spl: fix build break due to changes in FAT > > Chandan Nath (5): > ARM:AM33XX: Added support for AM33xx > ARM:AM33XX: Add clock definitions > ARM:AM33XX: Add emif/ddr support > ARM:AM33XX: Added timer support > ARM:AM33XX: Add support for TI AM335X EVM > > Christian Riesch (1): > da850evm: Move LPSC configuration to board_early_init_f() > > Fabio Estevam (2): > mx31pdk: Remove unneeded config > imx: fix coding style > > Heiko Schocher (4): > arm, logbuffer: make it compileclean > cosmetic, post: Codingstyle cleanup > arm, post: add missing post_time_ms for arm > arm, davinci: add missing LSPC define for MMC/SD1 > > Helmut Raiger (1): > mx31: provide readable WEIM CS accessor > > Ilya Yanok (1): > omap3/emif4: fix registers definition > > Jason Cooper (1): > dreamplug: initial board support. > > Joe Hershberger (2): > omap: Don't use gpio_free to change direction to input > omap4_panda: Build in cmd_gpio support on panda > > Lei Wen (9): > ARM: pantheon: reduce dependence of including platform file > ARM: armada100: reduce dependence of including platform file > ARM: kirkwood: reduce dependence of including platform file > serial: reduce include platform file for marvell chip > ARM: orion5x: reduce dependence of including platform file > gpio: mvmfp: reduce include platform file > ARM: pantheon: add mmc definition > Marvell: dkb: add mmc support > dkb: make mmc command as default enabled > > Manjunath Hadli (6): > dm644X: revert cache disable patch > dm36x: revert cache disable patch > da830: add support for NAND boot mode > davinci: emac: add new features to autonegotiate for EMAC > davinci: emac: add support for more than 1 PHYs > davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM > > Marek Vasut (2): > ARM: Update mach-types > I2C: Add i2c_get/set_speed() to mxc_i2c.c > > Michael Walle (1): > kirkwood_spi: add dummy spi_init() > > Philip Balister (3): > OMAP3: overo : Use ttyO2 instead of ttyS2. > OMAP3: overo: Move ethernet CS4 configuration to execute based on > board id > OMAP3: overo : Add environment variable optargs to bootargs > > Prafulla Wadaskar (1): > gplug: fixed build error as a result of code cleanup patch > > Ricardo Salveti de Araujo (3): > omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL > omap4: adding revision detection for 4460 ES1.1 > omap4: splitting padconfs into common, 4430 and 4460 > > Rob Herring (1): > ARM: Add Calxeda Highbank platform > > SRICHARAN R (1): > U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. > > Sergei Shtylyov (1): > DaVinci: correct MDSTAT.STATE mask > > Simon Glass (5): > tegra2: Rename CLOCK_PLL_ID to CLOCK_ID > tegra2: Clean up board code a little > tegra2: Add more clock functions > tegra2: Rename PIN_ to PINGRP_ > tegra2: Add more pinmux functions > > Simon Schwarz (6): > devkit8000: protect board_mmc_init > devkit8000: Add config to enable SPL MMC boot > omap3: Add Base register for DMA > omap3: Add DMA register accessors > omap3: Add interface for omap3 DMA > SPL: Add DMA library > > Stefano Babic (15): > MX51: vision2: Set global macros > misc: pmic: Freescale PMIC switches to generic PMIC driver > MX5: vision2: use new pmic driver > RTC: Switch mc13783 to generic pmic code > MX3: qong: use new pmic driver > MX5: efikamx/efikasb: use new pmic driver > misc: pmic: use I2C_SET_BUS in pmic I2C > misc: pmic: addI2C support to pmic_fsl driver > MX35: mx35pdk: use new pmic driver > MX5: mx51evk: use new pmic driver > MX5: mx53evk: use new pmic driver > MX31: mx31_litekit: use new pmic driver > MX31: mx31ads: use new pmic driver > MX31: mx31pdk: use new pmic driver > misc: pmic: drop old Freescale's pmic driver > > Steve Sakoman (3): > omap: overo: Configure mux for gpio10 > omap: overo: Disable pull-ups on camera PCLK, HS and VS signals > omap: beagle: Use ubifs instead of jffs2 for nand boot > > Tom Rini (3): > OMAP3 SPL: Provide weak omap_rev_string > devkit8000: Add malloc space > mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset > > Tom Warren (1): > tegra2: Enable MMC for Seaboard > > Vladimir Zapolskiy (1): > davinci: remove config.mk file from the sources > > Łukasz Majewski (3): > misc:pmic:core New generic PMIC driver > misc:pmic:max8998 MAX8998 support at a new PMIC driver. > misc:pmic:samsung Enable PMIC driver at GONI target > > MAINTAINERS | 12 + > Makefile | 3 + > arch/arm/cpu/arm1136/mx31/generic.c | 11 + > arch/arm/cpu/arm1136/mx31/timer.c | 23 +- > arch/arm/cpu/arm1136/mx35/generic.c | 2 +- > arch/arm/cpu/arm926ejs/armada100/cpu.c | 2 +- > arch/arm/cpu/arm926ejs/armada100/dram.c | 1 + > arch/arm/cpu/arm926ejs/armada100/timer.c | 1 + > arch/arm/cpu/arm926ejs/davinci/et1011c.c | 6 +- > arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 8 +- > arch/arm/cpu/arm926ejs/davinci/psc.c | 4 +- > arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 2 + > arch/arm/cpu/arm926ejs/kirkwood/dram.c | 2 + > arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 + > arch/arm/cpu/arm926ejs/kirkwood/timer.c | 1 + > arch/arm/cpu/arm926ejs/mx25/generic.c | 110 +- > arch/arm/cpu/arm926ejs/mx25/reset.c | 2 +- > arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +- > arch/arm/cpu/arm926ejs/mx27/reset.c | 2 +- > arch/arm/cpu/arm926ejs/mx27/timer.c | 14 +- > arch/arm/cpu/arm926ejs/orion5x/cpu.c | 3 +- > arch/arm/cpu/arm926ejs/orion5x/dram.c | 2 +- > arch/arm/cpu/arm926ejs/orion5x/timer.c | 2 +- > arch/arm/cpu/arm926ejs/pantheon/cpu.c | 13 +- > arch/arm/cpu/arm926ejs/pantheon/dram.c | 1 + > arch/arm/cpu/arm926ejs/pantheon/timer.c | 1 + > arch/arm/cpu/armv7/am33xx/Makefile | 48 + > arch/arm/cpu/armv7/am33xx/board.c | 66 + > arch/arm/cpu/armv7/am33xx/clock.c | 273 + > arch/arm/cpu/armv7/am33xx/ddr.c | 147 + > arch/arm/cpu/armv7/am33xx/emif4.c | 201 + > arch/arm/cpu/armv7/am33xx/lowlevel_init.S | 72 + > arch/arm/cpu/armv7/am33xx/sys_info.c | 130 + > .../davinci/config.mk => armv7/highbank/Makefile} | 34 +- > arch/arm/cpu/armv7/highbank/timer.c | 123 + > arch/arm/cpu/armv7/mx5/soc.c | 10 +- > arch/arm/cpu/armv7/omap-common/Makefile | 2 + > arch/arm/cpu/armv7/omap-common/gpio.c | 7 - > arch/arm/cpu/armv7/omap-common/spl.c | 12 + > arch/arm/cpu/armv7/omap3/board.c | 6 - > arch/arm/cpu/armv7/omap4/board.c | 24 +- > arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 7 + > arch/arm/cpu/armv7/tegra2/ap20.c | 5 +- > arch/arm/cpu/armv7/tegra2/clock.c | 825 +- > arch/arm/cpu/armv7/tegra2/pinmux.c | 528 +- > arch/arm/include/asm/arch-am33xx/clock.h | 24 + > arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 55 + > arch/arm/include/asm/arch-am33xx/cpu.h | 218 + > arch/arm/include/asm/arch-am33xx/ddr_defs.h | 264 + > arch/arm/include/asm/arch-am33xx/hardware.h | 81 + > arch/arm/include/asm/arch-am33xx/sys_proto.h | 39 + > arch/arm/include/asm/arch-armada100/armada100.h | 120 +- > arch/arm/include/asm/arch-armada100/config.h | 1 + > arch/arm/include/asm/arch-armada100/cpu.h | 125 + > arch/arm/include/asm/arch-armada100/mfp.h | 6 + > arch/arm/include/asm/arch-armada100/spi.h | 95 + > arch/arm/include/asm/arch-davinci/emac_defs.h | 4 - > arch/arm/include/asm/arch-davinci/hardware.h | 3 + > arch/arm/include/asm/arch-kirkwood/config.h | 1 + > arch/arm/include/asm/arch-kirkwood/kirkwood.h | 6 - > arch/arm/include/asm/arch-mx31/imx-regs.h | 35 +- > arch/arm/include/asm/arch-mx31/sys_proto.h | 35 + > arch/arm/include/asm/arch-mx5/sys_proto.h | 8 + > arch/arm/include/asm/arch-omap3/cpu.h | 46 + > arch/arm/include/asm/arch-omap3/dma.h | 77 + > arch/arm/include/asm/arch-omap3/omap3.h | 3 + > arch/arm/include/asm/arch-omap3/sys_proto.h | 1 - > arch/arm/include/asm/arch-omap4/omap4.h | 16 +- > arch/arm/include/asm/arch-omap4/sys_proto.h | 1 - > arch/arm/include/asm/arch-orion5x/orion5x.h | 6 - > arch/arm/include/asm/arch-pantheon/config.h | 20 + > arch/arm/include/asm/arch-pantheon/cpu.h | 12 + > arch/arm/include/asm/arch-pantheon/mfp.h | 12 + > arch/arm/include/asm/arch-pantheon/pantheon.h | 14 +- > arch/arm/include/asm/arch-tegra2/clk_rst.h | 84 +- > arch/arm/include/asm/arch-tegra2/clock.h | 149 +- > arch/arm/include/asm/arch-tegra2/pinmux.h | 444 +- > arch/arm/include/asm/mach-types.h |37600 > +++----------------- > arch/arm/include/asm/omap_common.h | 1 + > arch/arm/lib/board.c | 1 - > board/Marvell/aspenite/aspenite.c | 1 + > board/Marvell/dkb/dkb.c | 43 + > board/Marvell/dreamplug/Makefile | 54 + > board/Marvell/dreamplug/dreamplug.c | 151 + > board/Marvell/dreamplug/dreamplug.h | 42 + > board/Marvell/dreamplug/kwbimage.cfg | 163 + > board/Marvell/gplugd/gplugd.c | 13 + > board/Marvell/guruplug/guruplug.c | 1 + > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 1 + > board/Marvell/openrd/openrd.c | 1 + > board/Marvell/rd6281a/rd6281a.c | 1 + > board/Marvell/sheevaplug/sheevaplug.c | 1 + > board/davedenx/qong/qong.c | 107 +- > board/davinci/da8xxevm/da830evm.c | 63 + > board/davinci/da8xxevm/da850evm.c | 23 +- > board/efikamx/efikamx.c | 51 +- > board/freescale/mx31ads/mx31ads.c | 16 +- > board/freescale/mx31pdk/mx31pdk.c | 14 +- > board/freescale/mx35pdk/mx35pdk.c | 18 +- > board/freescale/mx51evk/mx51evk.c | 47 +- > board/freescale/mx53evk/mx53evk.c | 17 +- > board/highbank/Makefile | 49 + > board/highbank/highbank.c | 57 + > board/imx31_phycore/imx31_phycore.c | 41 +- > board/karo/tx25/tx25.c | 2 +- > board/keymile/km_arm/km_arm.c | 1 + > board/logicpd/imx27lite/imx27lite.c | 6 +- > board/logicpd/imx31_litekit/imx31_litekit.c | 30 +- > board/logicpd/zoom2/debug_board.c | 1 - > board/logicpd/zoom2/zoom2.c | 1 - > board/nvidia/common/board.c | 243 +- > board/nvidia/common/board.h | 4 +- > board/nvidia/harmony/harmony.c | 26 + > board/nvidia/seaboard/seaboard.c | 35 +- > board/overo/overo.c | 14 +- > board/overo/overo.h | 8 +- > board/samsung/goni/goni.c | 4 + > board/ti/am335x/Makefile | 43 + > board/ti/am335x/common_def.h | 24 + > board/ti/am335x/evm.c | 48 + > board/ti/am335x/mux.c | 278 + > board/ti/beagle/beagle.c | 6 - > board/ti/panda/panda.c | 17 + > board/ti/panda/panda_mux_data.h | 14 +- > board/timll/devkit8000/devkit8000.c | 2 +- > board/ttcontrol/vision2/vision2.c | 33 +- > boards.cfg | 6 +- > common/Makefile | 1 + > common/cmd_ide.c | 6 - > common/cmd_log.c | 2 +- > doc/README.SPL | 1 + > doc/README.omap3 | 18 + > drivers/dma/Makefile | 1 + > drivers/dma/omap3_dma.c | 180 + > drivers/gpio/kw_gpio.c | 1 + > drivers/gpio/mvmfp.c | 7 - > drivers/i2c/mxc_i2c.c | 31 +- > drivers/misc/Makefile | 6 +- > drivers/misc/fsl_pmic.c | 235 - > drivers/misc/pmic_core.c | 147 + > drivers/misc/pmic_fsl.c | 66 + > drivers/misc/pmic_i2c.c | 92 + > drivers/misc/pmic_max8998.c | 43 + > drivers/misc/pmic_spi.c | 109 + > drivers/mmc/omap_hsmmc.c | 4 + > drivers/mmc/tegra2_mmc.c | 94 +- > drivers/mmc/tegra2_mmc.h | 1 + > drivers/net/davinci_emac.c | 209 +- > drivers/net/mvgbe.c | 2 + > drivers/rtc/mc13783-rtc.c | 20 +- > drivers/serial/ns16550.c | 7 +- > drivers/serial/serial.c | 9 - > drivers/spi/Makefile | 1 + > drivers/spi/armada100_spi.c | 228 + > drivers/spi/kirkwood_spi.c | 5 + > drivers/usb/host/ehci-kirkwood.c | 1 + > include/configs/am335x_evm.h | 122 + > include/configs/da830evm.h | 5 +- > include/configs/da850evm.h | 2 +- > include/configs/davinci_dm365evm.h | 4 - > include/configs/davinci_dm6467evm.h | 1 - > include/configs/davinci_dvevm.h | 4 - > include/configs/davinci_schmoogie.h | 1 - > include/configs/davinci_sffsdr.h | 1 - > include/configs/davinci_sonata.h | 1 - > include/configs/devkit8000.h | 8 + > include/configs/dkb.h | 1 + > include/configs/dreamplug.h | 151 + > include/configs/ea20.h | 1 - > include/configs/edminiv2.h | 1 + > include/configs/efikamx.h | 5 +- > include/configs/gplugd.h | 19 +- > include/configs/hawkboard.h | 1 - > include/configs/highbank.h | 113 + > include/configs/imx31_litekit.h | 9 +- > include/configs/mx31ads.h | 8 +- > include/configs/mx31pdk.h | 6 +- > include/configs/mx35pdk.h | 5 +- > include/configs/mx51evk.h | 6 +- > include/configs/mx53evk.h | 5 +- > include/configs/omap3_beagle.h | 4 +- > include/configs/omap3_overo.h | 5 +- > include/configs/omap4_common.h | 20 +- > include/configs/omap4_panda.h | 3 + > include/configs/qong.h | 5 +- > include/configs/s5p_goni.h | 4 + > include/configs/vision2.h | 22 +- > include/fsl_pmic.h | 5 +- > include/max8998_pmic.h | 84 + > include/pmic.h | 71 + > post/post.c | 129 +- > spl/Makefile | 1 + > 192 files changed, 11961 insertions(+), 34593 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/kirkwood/asm-offsets.s > create mode 100644 arch/arm/cpu/armv7/am33xx/Makefile > create mode 100644 arch/arm/cpu/armv7/am33xx/board.c > create mode 100644 arch/arm/cpu/armv7/am33xx/clock.c > create mode 100644 arch/arm/cpu/armv7/am33xx/ddr.c > create mode 100644 arch/arm/cpu/armv7/am33xx/emif4.c > create mode 100644 arch/arm/cpu/armv7/am33xx/lowlevel_init.S > create mode 100644 arch/arm/cpu/armv7/am33xx/sys_info.c > rename arch/arm/cpu/{arm926ejs/davinci/config.mk => > armv7/highbank/Makefile} (58%) > create mode 100644 arch/arm/cpu/armv7/highbank/timer.c > create mode 100644 arch/arm/include/asm/arch-am33xx/clock.h > create mode 100644 arch/arm/include/asm/arch-am33xx/clocks_am33xx.h > create mode 100644 arch/arm/include/asm/arch-am33xx/cpu.h > create mode 100644 arch/arm/include/asm/arch-am33xx/ddr_defs.h > create mode 100644 arch/arm/include/asm/arch-am33xx/hardware.h > create mode 100644 arch/arm/include/asm/arch-am33xx/sys_proto.h > create mode 100644 arch/arm/include/asm/arch-armada100/spi.h > create mode 100644 arch/arm/include/asm/arch-mx31/sys_proto.h > create mode 100644 arch/arm/include/asm/arch-omap3/dma.h > create mode 100644 board/Marvell/dreamplug/Makefile > create mode 100644 board/Marvell/dreamplug/dreamplug.c > create mode 100644 board/Marvell/dreamplug/dreamplug.h > create mode 100644 board/Marvell/dreamplug/kwbimage.cfg > create mode 100644 board/highbank/Makefile > create mode 100644 board/highbank/highbank.c > create mode 100644 board/ti/am335x/Makefile > create mode 100644 board/ti/am335x/common_def.h > create mode 100644 board/ti/am335x/evm.c > create mode 100644 board/ti/am335x/mux.c > create mode 100644 drivers/dma/omap3_dma.c > delete mode 100644 drivers/misc/fsl_pmic.c > create mode 100644 drivers/misc/pmic_core.c > create mode 100644 drivers/misc/pmic_fsl.c > create mode 100644 drivers/misc/pmic_i2c.c > create mode 100644 drivers/misc/pmic_max8998.c > create mode 100644 drivers/misc/pmic_spi.c > create mode 100644 drivers/spi/armada100_spi.c > create mode 100644 include/configs/am335x_evm.h > create mode 100644 include/configs/dreamplug.h > create mode 100644 include/configs/highbank.h > create mode 100644 include/max8998_pmic.h > create mode 100644 include/pmic.h Applied, thanks. Best regards, Wolfgang Denk
Hi Albert, On Thu, Oct 27, 2011 at 3:32 PM, Wolfgang Denk <wd@denx.de> wrote: > Dear Albert ARIBAUD, > > In message <4EA9BB69.8050602@aribaud.net> you wrote: >> Hi Wolfgang, >> >> The following changes since commit c30a15e590c7e5bfd27e4704c81648071f11d51f: >> >> FAT: Add FAT write feature (2011-10-26 21:40:44 +0200) >> >> are available in the git repository at: >> git://git.denx.de/u-boot-arm master >> >> Ajay Bhargav (4): >> SPI: Add SPI driver support for Marvell Armada100 >> Armada100: Add SPI support for Marvell gplugD >> Armada100: Add SPI flash support for Marvell gplugD >> Armada100: Add env storage support for Marvell gplugD >> >> Aneesh V (1): >> omap: spl: fix build break due to changes in FAT >> >> Chandan Nath (5): >> ARM:AM33XX: Added support for AM33xx >> ARM:AM33XX: Add clock definitions >> ARM:AM33XX: Add emif/ddr support >> ARM:AM33XX: Added timer support >> ARM:AM33XX: Add support for TI AM335X EVM >> >> Christian Riesch (1): >> da850evm: Move LPSC configuration to board_early_init_f() >> >> Fabio Estevam (2): >> mx31pdk: Remove unneeded config >> imx: fix coding style >> >> Heiko Schocher (4): >> arm, logbuffer: make it compileclean >> cosmetic, post: Codingstyle cleanup >> arm, post: add missing post_time_ms for arm >> arm, davinci: add missing LSPC define for MMC/SD1 >> >> Helmut Raiger (1): >> mx31: provide readable WEIM CS accessor >> >> Ilya Yanok (1): >> omap3/emif4: fix registers definition >> >> Jason Cooper (1): >> dreamplug: initial board support. >> >> Joe Hershberger (2): >> omap: Don't use gpio_free to change direction to input >> omap4_panda: Build in cmd_gpio support on panda >> >> Lei Wen (9): >> ARM: pantheon: reduce dependence of including platform file >> ARM: armada100: reduce dependence of including platform file >> ARM: kirkwood: reduce dependence of including platform file >> serial: reduce include platform file for marvell chip >> ARM: orion5x: reduce dependence of including platform file >> gpio: mvmfp: reduce include platform file >> ARM: pantheon: add mmc definition >> Marvell: dkb: add mmc support >> dkb: make mmc command as default enabled >> >> Manjunath Hadli (6): >> dm644X: revert cache disable patch >> dm36x: revert cache disable patch >> da830: add support for NAND boot mode >> davinci: emac: add new features to autonegotiate for EMAC >> davinci: emac: add support for more than 1 PHYs >> davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM >> >> Marek Vasut (2): >> ARM: Update mach-types >> I2C: Add i2c_get/set_speed() to mxc_i2c.c >> >> Michael Walle (1): >> kirkwood_spi: add dummy spi_init() >> >> Philip Balister (3): >> OMAP3: overo : Use ttyO2 instead of ttyS2. >> OMAP3: overo: Move ethernet CS4 configuration to execute based on >> board id >> OMAP3: overo : Add environment variable optargs to bootargs >> >> Prafulla Wadaskar (1): >> gplug: fixed build error as a result of code cleanup patch >> >> Ricardo Salveti de Araujo (3): >> omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL >> omap4: adding revision detection for 4460 ES1.1 >> omap4: splitting padconfs into common, 4430 and 4460 >> >> Rob Herring (1): >> ARM: Add Calxeda Highbank platform >> >> SRICHARAN R (1): >> U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. >> >> Sergei Shtylyov (1): >> DaVinci: correct MDSTAT.STATE mask >> >> Simon Glass (5): >> tegra2: Rename CLOCK_PLL_ID to CLOCK_ID >> tegra2: Clean up board code a little >> tegra2: Add more clock functions >> tegra2: Rename PIN_ to PINGRP_ >> tegra2: Add more pinmux functions >> >> Simon Schwarz (6): >> devkit8000: protect board_mmc_init >> devkit8000: Add config to enable SPL MMC boot >> omap3: Add Base register for DMA >> omap3: Add DMA register accessors >> omap3: Add interface for omap3 DMA >> SPL: Add DMA library >> >> Stefano Babic (15): >> MX51: vision2: Set global macros >> misc: pmic: Freescale PMIC switches to generic PMIC driver >> MX5: vision2: use new pmic driver >> RTC: Switch mc13783 to generic pmic code >> MX3: qong: use new pmic driver >> MX5: efikamx/efikasb: use new pmic driver >> misc: pmic: use I2C_SET_BUS in pmic I2C >> misc: pmic: addI2C support to pmic_fsl driver >> MX35: mx35pdk: use new pmic driver >> MX5: mx51evk: use new pmic driver >> MX5: mx53evk: use new pmic driver >> MX31: mx31_litekit: use new pmic driver >> MX31: mx31ads: use new pmic driver >> MX31: mx31pdk: use new pmic driver >> misc: pmic: drop old Freescale's pmic driver >> >> Steve Sakoman (3): >> omap: overo: Configure mux for gpio10 >> omap: overo: Disable pull-ups on camera PCLK, HS and VS signals >> omap: beagle: Use ubifs instead of jffs2 for nand boot >> >> Tom Rini (3): >> OMAP3 SPL: Provide weak omap_rev_string >> devkit8000: Add malloc space >> mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset >> >> Tom Warren (1): >> tegra2: Enable MMC for Seaboard You have Tom's MMC patch here but not the series from Stephen. Please can you see my email below about this: On Thu, Oct 20, 2011 at 3:57 PM, Simon Glass <sjg@chromium.org> wrote: > Hi Albert, Wolfgang, > > I believe this is the current status on Tegra2 in u-boot-arm.git: > > - Stephen Warren has a patch series ending here: > http://patchwork.ozlabs.org/patch/119325/ > - Stephen Warren has a single GPIO patch here: > http://patchwork.ozlabs.org/patch/118184/ > - I have a boot refactor patch series ending here: > http://patchwork.ozlabs.org/patch/119941/ > > I think all of these have passed review, so I hope they can be > applied. They need to be applied in above order though. If there are > any problems I am on-hand to rebase, etc. The boot patch is actually still in review but I believe Stephen's patches are ready. Regards, Simon
Hi Simon, Le 28/10/2011 03:53, Simon Glass a écrit : > Hi Albert, > You have Tom's MMC patch here but not the series from Stephen. Please > can you see my email below about this: > > On Thu, Oct 20, 2011 at 3:57 PM, Simon Glass<sjg@chromium.org> wrote: >> Hi Albert, Wolfgang, >> >> I believe this is the current status on Tegra2 in u-boot-arm.git: >> >> - Stephen Warren has a patch series ending here: >> http://patchwork.ozlabs.org/patch/119325/ >> - Stephen Warren has a single GPIO patch here: >> http://patchwork.ozlabs.org/patch/118184/ >> - I have a boot refactor patch series ending here: >> http://patchwork.ozlabs.org/patch/119941/ >> >> I think all of these have passed review, so I hope they can be >> applied. They need to be applied in above order though. If there are >> any problems I am on-hand to rebase, etc. > > The boot patch is actually still in review but I believe Stephen's > patches are ready. Thanks Simon. I know I haven't gotten everything in, and I am working through the backlog. I'll get these in as soon as I can. > Regards, > Simon Amicalement,
Hi Albert, On Thu, Oct 27, 2011 at 10:13 PM, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote: > Hi Simon, > > Le 28/10/2011 03:53, Simon Glass a écrit : >> >> Hi Albert, > >> You have Tom's MMC patch here but not the series from Stephen. Please >> can you see my email below about this: >> >> On Thu, Oct 20, 2011 at 3:57 PM, Simon Glass<sjg@chromium.org> wrote: >>> >>> Hi Albert, Wolfgang, >>> >>> I believe this is the current status on Tegra2 in u-boot-arm.git: >>> >>> - Stephen Warren has a patch series ending here: >>> http://patchwork.ozlabs.org/patch/119325/ >>> - Stephen Warren has a single GPIO patch here: >>> http://patchwork.ozlabs.org/patch/118184/ >>> - I have a boot refactor patch series ending here: >>> http://patchwork.ozlabs.org/patch/119941/ >>> >>> I think all of these have passed review, so I hope they can be >>> applied. They need to be applied in above order though. If there are >>> any problems I am on-hand to rebase, etc. >> >> The boot patch is actually still in review but I believe Stephen's >> patches are ready. > > Thanks Simon. I know I haven't gotten everything in, and I am working > through the backlog. Thank you - yes I can see there is an awful lot to get through. > > I'll get these in as soon as I can. OK thanks. Wolfgang has picked up the FDT series, so we don't need to worry about that here. I am going to see if I can tidy up the SPI series so we can at least get the driver in. Regards, Simon > Amicalement, > -- > Albert. >