new file mode 100644
@@ -0,0 +1,355 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld@apm.com>
+ * Modified by Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * The dwc_otg module provides the initialization and cleanup entry
+ * points for the dwcotg driver. This module will be dynamically installed
+ * after Linux is booted using the insmod command. When the module is
+ * installed, the dwc_otg_driver_init function is called. When the module is
+ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
+ *
+ * This module also defines a data structure for the dwc_otg driver, which is
+ * used in conjunction with the standard device structure. These
+ * structures allow the OTG driver to comply with the standard Linux driver
+ * model in which devices and drivers are registered with a bus driver. This
+ * has the benefit that Linux can expose attributes of the driver and device
+ * in its special sysfs file system. Users can then read or write files in
+ * this file system to perform diagnostics on the driver components or the
+ * device.
+ */
+
+#include <linux/of_platform.h>
+
+#include "driver.h"
+
+#define DWC_DRIVER_VERSION "1.05"
+#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
+static const char dwc_driver_name[] = "dwc_otg";
+
+static irqreturn_t dwc_otg_common_irq(int _irq, void *dev)
+{
+ struct dwc_otg_device *dwc_dev = dev;
+ int retval;
+ struct dwc_hcd *dwc_hcd;
+
+ dwc_hcd = dwc_dev->hcd;
+ spin_lock(&dwc_hcd->lock);
+ retval = dwc_otg_handle_common_intr(dwc_dev->core_if);
+ spin_unlock(&dwc_hcd->lock);
+ return IRQ_RETVAL(retval);
+}
+
+static irqreturn_t dwc_otg_externalchgpump_irq(int _irq, void *dev)
+{
+ struct dwc_otg_device *dwc_dev = dev;
+
+ if (dwc_otg_is_host_mode(dwc_dev->core_if)) {
+ struct dwc_hcd *dwc_hcd;
+ u32 hprt0 = 0;
+
+ dwc_hcd = dwc_dev->hcd;
+ spin_lock(&dwc_hcd->lock);
+ dwc_hcd->flags.b.port_over_current_change = 1;
+
+ hprt0 = DWC_HPRT0_PRT_PWR_RW(hprt0, 0);
+ dwc_reg_write(dwc_dev->core_if->host_if->hprt0, 0, hprt0);
+ spin_unlock(&dwc_hcd->lock);
+ } else {
+ /* Device mode - This int is n/a for device mode */
+ dev_dbg(dev, "DeviceMode: OTG OverCurrent Detected\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __devexit dwc_otg_driver_remove(struct platform_device *ofdev)
+{
+ struct device *dev = &ofdev->dev;
+ struct dwc_otg_device *dwc_dev = dev_get_drvdata(dev);
+
+ /* Memory allocation for dwc_otg_device may have failed. */
+ if (!dwc_dev)
+ return 0;
+
+ /* Free the IRQ */
+ free_irq(dwc_dev->irq, dwc_dev);
+ /* Free external charge pump irq */
+ free_irq(dwc_dev->hcd->cp_irq, dwc_dev);
+
+ if (dwc_dev->hcd)
+ dwc_otg_hcd_remove(dev);
+
+ if (dwc_dev->pcd)
+ dwc_otg_pcd_remove(dev);
+
+ if (dwc_dev->core_if)
+ dwc_otg_cil_remove(dwc_dev->core_if);
+
+ /* Return the memory. */
+ if (dwc_dev->base)
+ iounmap(dwc_dev->base);
+
+ if (dwc_dev->phys_addr)
+ release_mem_region(dwc_dev->phys_addr, dwc_dev->base_len);
+
+ otg_put_transceiver(dwc_dev->core_if->xceiv);
+ dwc_dev->core_if->xceiv = NULL;
+
+ kfree(dwc_dev);
+
+ /* Clear the drvdata pointer. */
+ dev_set_drvdata(dev, NULL);
+ return 0;
+}
+
+static int __devinit dwc_otg_driver_probe(struct platform_device *ofdev)
+{
+ int retval;
+ struct dwc_otg_device *dwc_dev;
+ struct device *dev = &ofdev->dev;
+ struct resource res;
+ ulong gusbcfg_addr;
+ u32 usbcfg = 0;
+
+ dwc_dev = kzalloc(sizeof(*dwc_dev), GFP_KERNEL);
+ if (!dwc_dev) {
+ dev_err(dev, "kmalloc of dwc_otg_device failed\n");
+ retval = -ENOMEM;
+ goto fail_dwc_dev;
+ }
+
+ /* Retrieve the memory and IRQ resources. */
+ dwc_dev->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+ if (dwc_dev->irq == NO_IRQ) {
+ dev_err(dev, "no device irq\n");
+ retval = -ENODEV;
+ goto fail_of_irq;
+ }
+
+ if (of_address_to_resource(ofdev->dev.of_node, 0, &res)) {
+ dev_err(dev, "%s: Can't get USB-OTG register address\n",
+ __func__);
+ retval = -ENOMEM;
+ goto fail_of_irq;
+ }
+
+ dwc_dev->phys_addr = res.start;
+ dwc_dev->base_len = res.end - res.start + 1;
+ if (!request_mem_region(dwc_dev->phys_addr,
+ dwc_dev->base_len, dwc_driver_name)) {
+ dev_err(dev, "request_mem_region failed\n");
+ retval = -EBUSY;
+ goto fail_of_irq;
+ }
+
+ /* Map the DWC_otg Core memory into virtual address space. */
+ dwc_dev->base = ioremap(dwc_dev->phys_addr, dwc_dev->base_len);
+ if (!dwc_dev->base) {
+ dev_err(dev, "ioremap() failed\n");
+ retval = -ENOMEM;
+ goto fail_ioremap;
+ }
+ dev_dbg(dev, "mapped base=0x%08x\n", (__force u32)dwc_dev->base);
+
+ /*
+ * Initialize driver data to point to the global DWC_otg
+ * Device structure.
+ */
+ dev_set_drvdata(dev, dwc_dev);
+
+ dwc_dev->core_if =
+ dwc_otg_cil_init(dwc_dev->base, &dwc_otg_module_params);
+ if (!dwc_dev->core_if) {
+ dev_err(dev, "CIL initialization failed!\n");
+ retval = -ENOMEM;
+ goto fail_cil_init;
+ }
+
+ /*
+ * Validate parameter values after dwc_otg_cil_init.
+ */
+ if (check_parameters(dwc_dev->core_if)) {
+ retval = -EINVAL;
+ goto fail_check_param;
+ }
+
+ usb_nop_xceiv_register();
+ dwc_dev->core_if->xceiv = otg_get_transceiver();
+ if (!dwc_dev->core_if->xceiv) {
+ retval = -ENODEV;
+ goto fail_xceiv;
+ }
+ dwc_set_feature(dwc_dev->core_if);
+
+ /* Initialize the DWC_otg core. */
+ dwc_otg_core_init(dwc_dev->core_if);
+
+ /*
+ * Disable the global interrupt until all the interrupt
+ * handlers are installed.
+ */
+ spin_lock(&dwc_dev->hcd->lock);
+ dwc_otg_disable_global_interrupts(dwc_dev->core_if);
+ spin_unlock(&dwc_dev->hcd->lock);
+
+ /*
+ * Install the interrupt handler for the common interrupts before
+ * enabling common interrupts in core_init below.
+ */
+ retval = request_irq(dwc_dev->irq, dwc_otg_common_irq,
+ IRQF_SHARED, "dwc_otg", dwc_dev);
+ if (retval) {
+ dev_err(dev, "request of irq%d failed retval: %d\n",
+ dwc_dev->irq, retval);
+ retval = -EBUSY;
+ goto fail_req_irq;
+ } else {
+ dwc_dev->common_irq_installed = 1;
+ }
+
+ if (!dwc_has_feature(dwc_dev->core_if, DWC_HOST_ONLY)) {
+ /* Initialize the PCD */
+ retval = dwc_otg_pcd_init(dev);
+ if (retval) {
+ dev_err(dev, "dwc_otg_pcd_init failed\n");
+ dwc_dev->pcd = NULL;
+ goto fail_req_irq;
+ }
+ }
+
+ gusbcfg_addr = (ulong) (dwc_dev->core_if->core_global_regs)
+ + DWC_GUSBCFG;
+ if (!dwc_has_feature(dwc_dev->core_if, DWC_DEVICE_ONLY)) {
+ /* Initialize the HCD and force_host_mode */
+ usbcfg = dwc_reg_read(gusbcfg_addr, 0);
+ usbcfg |= DWC_USBCFG_FRC_HST_MODE;
+ dwc_reg_write(gusbcfg_addr, 0, usbcfg);
+
+ retval = dwc_otg_hcd_init(dev, dwc_dev);
+ if (retval) {
+ dev_err(dev, "dwc_otg_hcd_init failed\n");
+ dwc_dev->hcd = NULL;
+ goto fail_hcd;
+ }
+ /* configure chargepump interrupt */
+ dwc_dev->hcd->cp_irq = irq_of_parse_and_map(ofdev->dev.of_node,
+ 3);
+ if (dwc_dev->hcd->cp_irq) {
+ retval = request_irq(dwc_dev->hcd->cp_irq,
+ dwc_otg_externalchgpump_irq,
+ IRQF_SHARED,
+ "dwc_otg_ext_chg_pump", dwc_dev);
+ if (retval) {
+ dev_err(dev,
+ "request of irq failed retval: %d\n",
+ retval);
+ retval = -EBUSY;
+ goto fail_hcd;
+ } else {
+ dev_dbg(dev, "%s: ExtChgPump Detection "
+ "IRQ registered\n", dwc_driver_name);
+ }
+ }
+ }
+ /*
+ * Enable the global interrupt after all the interrupt
+ * handlers are installed.
+ */
+ dwc_otg_enable_global_interrupts(dwc_dev->core_if);
+
+ usbcfg = dwc_reg_read(gusbcfg_addr, 0);
+ usbcfg &= ~DWC_USBCFG_FRC_HST_MODE;
+ dwc_reg_write(gusbcfg_addr, 0, usbcfg);
+
+ return 0;
+fail_hcd:
+ free_irq(dwc_dev->irq, dwc_dev);
+ if (!dwc_has_feature(dwc_dev->core_if, DWC_HOST_ONLY)) {
+ if (dwc_dev->pcd)
+ dwc_otg_pcd_remove(dev);
+ }
+fail_req_irq:
+ otg_put_transceiver(dwc_dev->core_if->xceiv);
+fail_xceiv:
+ usb_nop_xceiv_unregister();
+fail_check_param:
+ dwc_otg_cil_remove(dwc_dev->core_if);
+fail_cil_init:
+ dev_set_drvdata(dev, NULL);
+ iounmap(dwc_dev->base);
+fail_ioremap:
+ release_mem_region(dwc_dev->phys_addr, dwc_dev->base_len);
+fail_of_irq:
+ kfree(dwc_dev);
+fail_dwc_dev:
+ return retval;
+}
+
+static const struct of_device_id dwc_otg_match[] = {
+ {.compatible = "amcc,dwc-otg",},
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, dwc_otg_match);
+
+static struct platform_driver dwc_otg_driver = {
+ .probe = dwc_otg_driver_probe,
+ .remove = __devexit_p(dwc_otg_driver_remove),
+ .driver = {
+ .name = "dwc_otg",
+ .owner = THIS_MODULE,
+ .of_match_table = dwc_otg_match,
+ },
+};
+
+static int __init dwc_otg_driver_init(void)
+{
+
+ return platform_driver_register(&dwc_otg_driver);
+}
+
+module_init(dwc_otg_driver_init);
+
+static void __exit dwc_otg_driver_cleanup(void)
+{
+ platform_driver_unregister(&dwc_otg_driver);
+}
+
+module_exit(dwc_otg_driver_cleanup);
+
+MODULE_DESCRIPTION(DWC_DRIVER_DESC);
+MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@apm.com");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,76 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld@apm.com>
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#if !defined(__DWC_OTG_DRIVER_H__)
+#define __DWC_OTG_DRIVER_H__
+
+/*
+ * This file contains the interface to the Linux driver.
+ */
+#include "cil.h"
+
+/*
+ * This structure is a wrapper that encapsulates the driver components used to
+ * manage a single DWC_otg controller.
+ */
+struct dwc_otg_device {
+ /* Base address returned from ioremap() */
+ __iomem void *base;
+
+ /* Pointer to the core interface structure. */
+ struct core_if *core_if;
+
+ /* Pointer to the PCD structure. */
+ struct dwc_pcd *pcd;
+
+ /* Pointer to the HCD structure. */
+ struct dwc_hcd *hcd;
+
+ /* Flag to indicate whether the common IRQ handler is installed. */
+ u8 common_irq_installed;
+
+ /* Interrupt request number. */
+ unsigned int irq;
+
+ /*
+ * Physical address of Control and Status registers, used by
+ * release_mem_region().
+ */
+ resource_size_t phys_addr;
+
+ /* Length of memory region, used by release_mem_region(). */
+ unsigned long base_len;
+};
+#endif
new file mode 100644
@@ -0,0 +1,180 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld@apm.com>
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * This file provides dwc_otg driver parameter and parameter checking.
+ */
+
+#include "cil.h"
+
+/*
+ * Encapsulate the module parameter settings
+ */
+struct core_params dwc_otg_module_params = {
+ .otg_cap = -1,
+ .dma_enable = -1,
+ .dma_burst_size = -1,
+ .speed = -1,
+ .host_support_fs_ls_low_power = -1,
+ .host_ls_low_power_phy_clk = -1,
+ .enable_dynamic_fifo = -1,
+ .dev_rx_fifo_size = -1,
+ .dev_nperio_tx_fifo_size = -1,
+ .dev_perio_tx_fifo_size = {-1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1}, /* 15 */
+ .host_rx_fifo_size = -1,
+ .host_nperio_tx_fifo_size = -1,
+ .host_perio_tx_fifo_size = -1,
+ .max_transfer_size = -1,
+ .max_packet_count = -1,
+ .host_channels = -1,
+ .dev_endpoints = -1,
+ .phy_type = -1,
+ .phy_utmi_width = -1,
+ .phy_ulpi_ddr = -1,
+ .phy_ulpi_ext_vbus = -1,
+ .i2c_enable = -1,
+ .ulpi_fs_ls = -1,
+ .ts_dline = -1,
+ .en_multiple_tx_fifo = -1,
+ .dev_tx_fifo_size = {-1, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1}, /* 15 */
+ .thr_ctl = -1,
+ .tx_thr_length = -1,
+ .rx_thr_length = -1,
+};
+
+/**
+ * Checks that parameter settings for the periodic Tx FIFO sizes are correct
+ * according to the hardware configuration. Sets the size to the hardware
+ * configuration if an incorrect size is detected.
+ */
+static int set_valid_perio_tx_fifo_sizes(struct core_if *core_if)
+{
+ ulong regs = (u32) core_if->core_global_regs;
+ u32 *param_size = &dwc_otg_module_params.dev_perio_tx_fifo_size[0];
+ u32 i, size;
+
+ for (i = 0; i < MAX_PERIO_FIFOS; i++, param_size++) {
+ size = dwc_reg_read(regs, DWC_DPTX_FSIZ_DIPTXF(i));
+ *param_size = size;
+ }
+ return 0;
+}
+
+/**
+ * Checks that parameter settings for the Tx FIFO sizes are correct according to
+ * the hardware configuration. Sets the size to the hardware configuration if
+ * an incorrect size is detected.
+ */
+static int set_valid_tx_fifo_sizes(struct core_if *core_if)
+{
+ ulong regs = (u32) core_if->core_global_regs;
+ u32 *param_size = &dwc_otg_module_params.dev_tx_fifo_size[0];
+ u32 i, size;
+
+ for (i = 0; i < MAX_TX_FIFOS; i++, param_size) {
+ size = dwc_reg_read(regs, DWC_DPTX_FSIZ_DIPTXF(i));
+ *param_size = size;
+ }
+ return 0;
+}
+
+/**
+ * This function is called during module intialization to verify that
+ * the module parameters are in a valid state.
+ */
+int __devinit check_parameters(struct core_if *core_if)
+{
+ /* Default values */
+ dwc_otg_module_params.otg_cap = dwc_param_otg_cap_default;
+ dwc_otg_module_params.dma_enable = dwc_param_dma_enable_default;
+ dwc_otg_module_params.speed = dwc_param_speed_default;
+ dwc_otg_module_params.host_support_fs_ls_low_power =
+ dwc_param_host_support_fs_ls_low_power_default;
+ dwc_otg_module_params.host_ls_low_power_phy_clk =
+ dwc_param_host_ls_low_power_phy_clk_default;
+ dwc_otg_module_params.phy_type = dwc_param_phy_type_default;
+ dwc_otg_module_params.phy_ulpi_ddr = dwc_param_phy_ulpi_ddr_default;
+ dwc_otg_module_params.phy_ulpi_ext_vbus =
+ dwc_param_phy_ulpi_ext_vbus_default;
+ dwc_otg_module_params.i2c_enable = dwc_param_i2c_enable_default;
+ dwc_otg_module_params.ulpi_fs_ls = dwc_param_ulpi_fs_ls_default;
+ dwc_otg_module_params.ts_dline = dwc_param_ts_dline_default;
+
+ dwc_otg_module_params.dma_burst_size = dwc_param_dma_burst_size_default;
+ dwc_otg_module_params.phy_utmi_width = dwc_param_phy_utmi_width_default;
+ dwc_otg_module_params.thr_ctl = dwc_param_thr_ctl_default;
+ dwc_otg_module_params.tx_thr_length = dwc_param_tx_thr_length_default;
+ dwc_otg_module_params.rx_thr_length = dwc_param_rx_thr_length_default;
+
+ /*
+ * Hardware configurations of the OTG core.
+ */
+ dwc_otg_module_params.enable_dynamic_fifo =
+ DWC_HWCFG2_DYN_FIFO_RD(core_if->hwcfg2);
+ dwc_otg_module_params.dev_rx_fifo_size =
+ dwc_reg_read(core_if->core_global_regs, DWC_GRXFSIZ);
+ dwc_otg_module_params.dev_nperio_tx_fifo_size =
+ dwc_reg_read(core_if->core_global_regs, DWC_GNPTXFSIZ) >> 16;
+
+ dwc_otg_module_params.host_rx_fifo_size =
+ dwc_reg_read(core_if->core_global_regs, DWC_GRXFSIZ);
+ dwc_otg_module_params.host_nperio_tx_fifo_size =
+ dwc_reg_read(core_if->core_global_regs, DWC_GNPTXFSIZ) >> 16;
+ dwc_otg_module_params.host_perio_tx_fifo_size =
+ dwc_reg_read(core_if->core_global_regs, DWC_HPTXFSIZ) >> 16;
+ dwc_otg_module_params.max_transfer_size =
+ (1 << (DWC_HWCFG3_XFERSIZE_CTR_WIDTH_RD(core_if->hwcfg3) + 11))
+ - 1;
+ dwc_otg_module_params.max_packet_count =
+ (1 << (DWC_HWCFG3_PKTSIZE_CTR_WIDTH_RD(core_if->hwcfg3) + 4))
+ - 1;
+
+ dwc_otg_module_params.host_channels =
+ DWC_HWCFG2_NO_HST_CHAN_RD(core_if->hwcfg2) + 1;
+ dwc_otg_module_params.dev_endpoints =
+ DWC_HWCFG2_NO_DEV_EP_RD(core_if->hwcfg2);
+ dwc_otg_module_params.en_multiple_tx_fifo =
+ (DWC_HWCFG4_DED_FIFO_ENA_RD(core_if->hwcfg4) == 0)
+ ? 0 : 1, 0;
+ set_valid_perio_tx_fifo_sizes(core_if);
+ set_valid_tx_fifo_sizes(core_if);
+
+ return 0;
+}
+
+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, bool, 0444);
+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");