| Message ID | 1319104399-20930-1-git-send-email-helmut.raiger@hale.at |
|---|---|
| State | Superseded |
| Headers | show |
On 10/20/2011 11:53 AM, Helmut Raiger wrote: > This renames BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT. > Alongside it removes some leftover > #define BOARD_LATE_INIT 1 > > Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> > --- Hi Helmut, > arch/arm/lib/board.c | 2 +- > arch/sandbox/lib/board.c | 2 +- > arch/sh/lib/board.c | 2 +- > board/freescale/mx35pdk/mx35pdk.c | 4 ++-- > board/freescale/mx51evk/mx51evk.c | 2 +- > board/imx31_phycore/imx31_phycore.c | 2 +- > board/st-ericsson/u8500/u8500_href.c | 4 ++-- > include/configs/VCMA9.h | 2 +- > include/configs/cerf250.h | 2 +- > include/configs/colibri_pxa270.h | 2 +- > include/configs/efikamx.h | 2 +- > include/configs/imx31_phycore.h | 2 +- > include/configs/jadecpu.h | 2 +- > include/configs/lubbock.h | 2 +- > include/configs/ms7750se.h | 2 +- > include/configs/mx1ads.h | 2 +- > include/configs/mx31pdk.h | 2 +- > include/configs/mx35pdk.h | 2 +- > include/configs/mx51evk.h | 2 +- > include/configs/mx53evk.h | 2 +- > include/configs/nhk8815.h | 2 +- > include/configs/pleb2.h | 2 +- > include/configs/pxa255_idp.h | 2 +- > include/configs/qong.h | 2 +- > include/configs/r2dplus.h | 2 +- > include/configs/sh7757lcr.h | 2 +- > include/configs/trizepsiv.h | 2 +- > include/configs/tx25.h | 2 +- > include/configs/u8500_href.h | 2 +- > include/configs/vision2.h | 2 +- > include/configs/xaeniax.h | 2 +- > include/configs/zipitz2.h | 2 +- > include/configs/zmx25.h | 2 +- > 33 files changed, 35 insertions(+), 35 deletions(-) I know there is not yet a description of the switch in the README file. However, we should take this occasion to add the right documentation. Change also the README file, adding the meaning of this switch and when the board function is called. Best regards, Stefano Babic
On 10/20/2011 01:17 PM, Helmut Raiger wrote: > On 10/20/2011 12:12 PM, Stefano Babic wrote: >> >> I know there is not yet a description of the switch in the README file. >> However, we should take this occasion to add the right documentation. >> >> Change also the README file, adding the meaning of this switch and when >> the board function is called. >> >> Best regards, >> Stefano Babi > > Since not a single board level config is documented Yes, also the CONFIG_BOARD_EARLY_INIT_F/R are undocumented, and are not hte only ones... > > $ grep CONFIG_BOARD Readme > $ > > Could someone hint a place inside Readme where this > should be located? Probably needs some sort of section ... Feel free to add a new one (Board options, mybe ?). Best regards, Stefano Babic
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 1fe3751..29dd348 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -578,7 +578,7 @@ void board_init_r(gd_t *id, ulong dest_addr) copy_filename(BootFile, s, sizeof(BootFile)); #endif -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT board_late_init(); #endif diff --git a/arch/sandbox/lib/board.c b/arch/sandbox/lib/board.c index 1fd8fa6..ae5a517 100644 --- a/arch/sandbox/lib/board.c +++ b/arch/sandbox/lib/board.c @@ -250,7 +250,7 @@ void board_init_r(gd_t *id, ulong dest_addr) /* enable exceptions */ enable_interrupts(); -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT board_late_init(); #endif diff --git a/arch/sh/lib/board.c b/arch/sh/lib/board.c index 6148e6b..d9c0c22 100644 --- a/arch/sh/lib/board.c +++ b/arch/sh/lib/board.c @@ -141,7 +141,7 @@ init_fnc_t *init_sequence[] = stdio_init, console_init_r, interrupt_init, -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT board_late_init, #endif #if defined(CONFIG_CMD_NET) diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index 9eefe5e..155b9ff 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -38,8 +38,8 @@ #include <asm/arch/sys_proto.h> #include <netdev.h> -#ifndef BOARD_LATE_INIT -#error "BOARD_LATE_INIT must be set for this board" +#ifndef CONFIG_BOARD_LATE_INIT +#error "CONFIG_BOARD_LATE_INIT must be set for this board" #endif #ifndef CONFIG_BOARD_EARLY_INIT_F diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 8da1ee8..f998610 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -409,7 +409,7 @@ int board_init(void) return 0; } -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { #ifdef CONFIG_MXC_SPI diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c index 773900e..47f1a8d 100644 --- a/board/imx31_phycore/imx31_phycore.c +++ b/board/imx31_phycore/imx31_phycore.c @@ -74,7 +74,7 @@ int board_early_init_f(void) return 0; } -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { #ifdef CONFIG_S6E63D6 diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c index 9283fab..5f85fdc 100644 --- a/board/st-ericsson/u8500/u8500_href.c +++ b/board/st-ericsson/u8500/u8500_href.c @@ -226,7 +226,7 @@ unsigned int addr_vall_arr[] = { 0xA03FE024, 0x00000000 /* USB */ }; -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT #ifdef CONFIG_MMC #define LDO_VAUX3_MASK 0x3 @@ -351,7 +351,7 @@ int board_late_init(void) return 0; } -#endif /* BOARD_LATE_INIT */ +#endif /* CONFIG_BOARD_LATE_INIT */ static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits) { diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 183045b..8b8113d 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -76,7 +76,7 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_NAND -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index be325e8..70427da 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -36,7 +36,7 @@ */ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ #define CONFIG_CERF250 1 /* on Cerf PXA Board */ -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #define CONFIG_BAUDRATE 38400 #define CONFIG_SYS_TEXT_BASE 0x0 diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 011731b..8a3446e 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -28,7 +28,7 @@ #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ -#undef BOARD_LATE_INIT +#undef CONFIG_BOARD_LATE_INIT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index 54f48e4..ce96b78 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -79,7 +79,7 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT /* * Hardware drivers diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 48bd50b..f4bfee4 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -192,7 +192,7 @@ /* EET platform additions */ #ifdef CONFIG_IMX31_PHYCORE_EET -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index 20e1087..a239efc 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -51,7 +51,7 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT /* * Compressions diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index bbdae3c..90c5bf8 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -41,7 +41,7 @@ #define CONFIG_SHARP_LM8V31 #endif #define CONFIG_MMC -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #define CONFIG_DOS_PARTITION #define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 16fb0d4..03f52f3 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -45,7 +45,7 @@ #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_BAUDRATE 38400 #define CONFIG_CONS_SCIF1 1 -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC0,38400" diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 0643312..9c1b255 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -45,7 +45,7 @@ /* #define _CONFIG_UART2 */ /* internal uart 2 */ /* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */ -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #define USE_920T_MMU 1 #if 0 diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 8c5730a..044b766 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -102,7 +102,7 @@ */ #undef CONFIG_CMD_IMLS -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 670e76d..6f42fc7 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -42,7 +42,7 @@ #define CONFIG_SYS_64BIT_VSPRINTF #define CONFIG_BOARD_EARLY_INIT_F -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_REVISION_TAG diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 0c10870..fd7f4ce 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -54,7 +54,7 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT /* * Hardware drivers diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 2033492..034fa87 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -44,7 +44,7 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 13d1e66..20db397 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -96,7 +96,7 @@ #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) -#define BOARD_LATE_INIT /* call board_late_init during start up */ +#define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */ /* timing informazion */ #define CONFIG_SYS_HZ 1000 /* Mandatory... */ diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index 7dd6246..2aeb7fb 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -38,7 +38,7 @@ #define CONFIG_PLEB2 1 /* on an PLEB2 Board */ #undef CONFIG_LCD #undef CONFIG_MMC -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index cd95081..620d270 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -64,7 +64,7 @@ #define CONFIG_MMC 1 #define CONFIG_DOS_PARTITION 1 -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/qong.h b/include/configs/qong.h index b1fc80c..8c68d1e 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -135,7 +135,7 @@ #define CONFIG_CMD_SETEXPR #define CONFIG_CMD_SPI -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index a7a92f7..0ce3fa8 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -30,7 +30,7 @@ #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_CONS_SCIF1 1 -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC0,115200" diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index 4a5fd0d..2d6eb33 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -107,7 +107,7 @@ #define SH7757LCR_ETHERNET_MAC_BASE SH7757LCR_ETHERNET_MAC_BASE_SPI #define SH7757LCR_ETHERNET_MAC_SIZE 17 #define SH7757LCR_ETHERNET_NUM_CH 2 -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT /* Gigabit Ether */ #define SH7757LCR_GIGA_ETHERNET_NUM_CH 2 diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 6ec9b80..2d55044 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -43,7 +43,7 @@ #define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ #define CONFIG_MMC 1 -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 6380bb8..8cb57ff 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -137,7 +137,7 @@ #define CONFIG_FEC_MXC_PHYADDR 0x1f #define CONFIG_MII #define CONFIG_CMD_NET -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_ENV_OVERWRITE #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 636922c..4747fbd 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -35,7 +35,7 @@ #define CONFIG_SYS_HZ 1000 /* must be 1000 */ #define CONFIG_BOARD_EARLY_INIT_F -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT /* * Size of malloc() pool diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 3b42afc..56cbe3f 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -39,7 +39,7 @@ #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2 diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 8a41416..6dce8ae 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -45,7 +45,7 @@ #define CONFIG_SYS_TEXT_BASE 0x0 -#define BOARD_LATE_INIT 1 +#define CONFIG_BOARD_LATE_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index ade40b5..9505007 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -29,7 +29,7 @@ #define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ #define CONFIG_SYS_TEXT_BASE 0x0 -#undef BOARD_LATE_INIT +#undef CONFIG_BOARD_LATE_INIT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 0d5ee14..9a7a27a 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -46,7 +46,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT /* * Compressions
This renames BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT. Alongside it removes some leftover #define BOARD_LATE_INIT 1 Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> --- arch/arm/lib/board.c | 2 +- arch/sandbox/lib/board.c | 2 +- arch/sh/lib/board.c | 2 +- board/freescale/mx35pdk/mx35pdk.c | 4 ++-- board/freescale/mx51evk/mx51evk.c | 2 +- board/imx31_phycore/imx31_phycore.c | 2 +- board/st-ericsson/u8500/u8500_href.c | 4 ++-- include/configs/VCMA9.h | 2 +- include/configs/cerf250.h | 2 +- include/configs/colibri_pxa270.h | 2 +- include/configs/efikamx.h | 2 +- include/configs/imx31_phycore.h | 2 +- include/configs/jadecpu.h | 2 +- include/configs/lubbock.h | 2 +- include/configs/ms7750se.h | 2 +- include/configs/mx1ads.h | 2 +- include/configs/mx31pdk.h | 2 +- include/configs/mx35pdk.h | 2 +- include/configs/mx51evk.h | 2 +- include/configs/mx53evk.h | 2 +- include/configs/nhk8815.h | 2 +- include/configs/pleb2.h | 2 +- include/configs/pxa255_idp.h | 2 +- include/configs/qong.h | 2 +- include/configs/r2dplus.h | 2 +- include/configs/sh7757lcr.h | 2 +- include/configs/trizepsiv.h | 2 +- include/configs/tx25.h | 2 +- include/configs/u8500_href.h | 2 +- include/configs/vision2.h | 2 +- include/configs/xaeniax.h | 2 +- include/configs/zipitz2.h | 2 +- include/configs/zmx25.h | 2 +- 33 files changed, 35 insertions(+), 35 deletions(-)