[01/36] ds1225y: Use stdio instead of QEMUFile

QEMUFile * is only intended for migration nowadays.  Using it for
anything else just adds pain and a layer of buffers for no good
reason.

Signed-off-by: Juan Quintela <quintela@redhat.com>
---
 hw/ds1225y.c |   28 ++++++++++++++++------------
 1 files changed, 16 insertions(+), 12 deletions(-)

On 10/11/2011 06:00 PM, Juan Quintela wrote:
> QEMUFile * is only intended for migration nowadays.  Using it for
> anything else just adds pain and a layer of buffers for no good
> reason.
>
> Signed-off-by: Juan Quintela<quintela@redhat.com>
> ---
>   hw/ds1225y.c |   28 ++++++++++++++++------------
>   1 files changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/hw/ds1225y.c b/hw/ds1225y.c
> index 9875c44..6852a61 100644
> --- a/hw/ds1225y.c
> +++ b/hw/ds1225y.c
> @@ -29,7 +29,7 @@ typedef struct {
>       DeviceState qdev;
>       uint32_t chip_size;
>       char *filename;
> -    QEMUFile *file;
> +    FILE *file;
>       uint8_t *contents;
>   } NvRamState;
>
> @@ -70,9 +70,9 @@ static void nvram_writeb (void *opaque, target_phys_addr_t addr, uint32_t val)
>
>       s->contents[addr] = val;
>       if (s->file) {
> -        qemu_fseek(s->file, addr, SEEK_SET);
> -        qemu_put_byte(s->file, (int)val);
> -        qemu_fflush(s->file);
> +        fseek(s->file, addr, SEEK_SET);
> +        fputc(val, s->file);
> +        fflush(s->file);
>       }
>   }
>
> @@ -108,15 +108,17 @@ static int nvram_post_load(void *opaque, int version_id)
>
>       /* Close file, as filename may has changed in load/store process */
>       if (s->file) {
> -        qemu_fclose(s->file);
> +        fclose(s->file);
>       }
>
>       /* Write back nvram contents */
> -    s->file = qemu_fopen(s->filename, "wb");
> +    s->file = fopen(s->filename, "wb");
>       if (s->file) {
>           /* Write back contents, as 'wb' mode cleaned the file */
> -        qemu_put_buffer(s->file, s->contents, s->chip_size);
> -        qemu_fflush(s->file);
> +        if (fwrite(s->contents, s->chip_size, 1, s->file) != 1) {
> +            printf("nvram_post_load: short write\n");
> +        }
> +        fflush(s->file);
>       }
>
>       return 0;
> @@ -143,7 +145,7 @@ typedef struct {
>   static int nvram_sysbus_initfn(SysBusDevice *dev)
>   {
>       NvRamState *s =&FROM_SYSBUS(SysBusNvRamState, dev)->nvram;
> -    QEMUFile *file;
> +    FILE *file;
>       int s_io;
>
>       s->contents = g_malloc0(s->chip_size);
> @@ -153,11 +155,13 @@ static int nvram_sysbus_initfn(SysBusDevice *dev)
>       sysbus_init_mmio(dev, s->chip_size, s_io);
>
>       /* Read current file */
> -    file = qemu_fopen(s->filename, "rb");
> +    file = fopen(s->filename, "rb");
>       if (file) {
>           /* Read nvram contents */
> -        qemu_get_buffer(file, s->contents, s->chip_size);
> -        qemu_fclose(file);
> +        if (fread(s->contents, s->chip_size, 1, file) != 1) {
> +            printf("nvram_sysbus_initfn: short read\n");
> +        }
> +        fclose(file);
>       }
>       nvram_post_load(s, 0);
>

Tested-by: Zhi Hui Li<zhihuili@linux.vnet.ibm.com>

On 10/11/2011 05:00 AM, Juan Quintela wrote:
> QEMUFile * is only intended for migration nowadays.  Using it for
> anything else just adds pain and a layer of buffers for no good
> reason.
>
> Signed-off-by: Juan Quintela<quintela@redhat.com>

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>

Regards,

Anthony Liguori

> ---
>   hw/ds1225y.c |   28 ++++++++++++++++------------
>   1 files changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/hw/ds1225y.c b/hw/ds1225y.c
> index 9875c44..6852a61 100644
> --- a/hw/ds1225y.c
> +++ b/hw/ds1225y.c
> @@ -29,7 +29,7 @@ typedef struct {
>       DeviceState qdev;
>       uint32_t chip_size;
>       char *filename;
> -    QEMUFile *file;
> +    FILE *file;
>       uint8_t *contents;
>   } NvRamState;
>
> @@ -70,9 +70,9 @@ static void nvram_writeb (void *opaque, target_phys_addr_t addr, uint32_t val)
>
>       s->contents[addr] = val;
>       if (s->file) {
> -        qemu_fseek(s->file, addr, SEEK_SET);
> -        qemu_put_byte(s->file, (int)val);
> -        qemu_fflush(s->file);
> +        fseek(s->file, addr, SEEK_SET);
> +        fputc(val, s->file);
> +        fflush(s->file);
>       }
>   }
>
> @@ -108,15 +108,17 @@ static int nvram_post_load(void *opaque, int version_id)
>
>       /* Close file, as filename may has changed in load/store process */
>       if (s->file) {
> -        qemu_fclose(s->file);
> +        fclose(s->file);
>       }
>
>       /* Write back nvram contents */
> -    s->file = qemu_fopen(s->filename, "wb");
> +    s->file = fopen(s->filename, "wb");
>       if (s->file) {
>           /* Write back contents, as 'wb' mode cleaned the file */
> -        qemu_put_buffer(s->file, s->contents, s->chip_size);
> -        qemu_fflush(s->file);
> +        if (fwrite(s->contents, s->chip_size, 1, s->file) != 1) {
> +            printf("nvram_post_load: short write\n");
> +        }
> +        fflush(s->file);
>       }
>
>       return 0;
> @@ -143,7 +145,7 @@ typedef struct {
>   static int nvram_sysbus_initfn(SysBusDevice *dev)
>   {
>       NvRamState *s =&FROM_SYSBUS(SysBusNvRamState, dev)->nvram;
> -    QEMUFile *file;
> +    FILE *file;
>       int s_io;
>
>       s->contents = g_malloc0(s->chip_size);
> @@ -153,11 +155,13 @@ static int nvram_sysbus_initfn(SysBusDevice *dev)
>       sysbus_init_mmio(dev, s->chip_size, s_io);
>
>       /* Read current file */
> -    file = qemu_fopen(s->filename, "rb");
> +    file = fopen(s->filename, "rb");
>       if (file) {
>           /* Read nvram contents */
> -        qemu_get_buffer(file, s->contents, s->chip_size);
> -        qemu_fclose(file);
> +        if (fread(s->contents, s->chip_size, 1, file) != 1) {
> +            printf("nvram_sysbus_initfn: short read\n");
> +        }
> +        fclose(file);
>       }
>       nvram_post_load(s, 0);
>