Message ID | 201110112021.51236.bzolnier@gmail.com |
---|---|
State | Not Applicable |
Delegated to: | David Miller |
Headers | show |
On Tue, 11 Oct 2011 20:21:50 +0200 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote: > From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Subject: [PATCH] pata_sil680: minor CodingStyle fixups > > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 11-10-2011 22:21, Bartlomiej Zolnierkiewicz wrote: > From: Bartlomiej Zolnierkiewicz<bzolnier@gmail.com> > Subject: [PATCH] pata_sil680: minor CodingStyle fixups > Signed-off-by: Bartlomiej Zolnierkiewicz<bzolnier@gmail.com> > --- > drivers/ata/pata_sil680.c | 58 ++++++++++++++++++++++++++-------------------- > 1 file changed, 33 insertions(+), 25 deletions(-) > Index: b/drivers/ata/pata_sil680.c > =================================================================== > --- a/drivers/ata/pata_sil680.c > +++ b/drivers/ata/pata_sil680.c [...] > @@ -265,12 +266,19 @@ static u8 sil680_init_chip(struct pci_de > pci_write_config_dword(pdev, 0xB8, 0x43924392); > pci_write_config_dword(pdev, 0xBC, 0x40094009); > > - switch(tmpbyte& 0x30) { > - case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break; > - case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break; > - case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break; > - /* This last case is _NOT_ ok */ > - case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n"); > + switch (tmpbyte& 0x30) { > + case 0x00: > + printk(KERN_INFO "sil680: 100MHz clock.\n"); > + break; > + case 0x10: > + printk(KERN_INFO "sil680: 133MHz clock.\n"); > + break; > + case 0x20: > + printk(KERN_INFO "sil680: Using PCI clock.\n"); > + break; pr_info() here and above? > + /* This last case is _NOT_ ok */ > + case 0x30: > + printk(KERN_ERR "sil680: Clock disabled ?\n"); pr_err()? Or checkpatch.pl doesn't complain about it (I forgot)? WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > + /* This last case is _NOT_ ok */ > > + case 0x30: > > + printk(KERN_ERR "sil680: Clock disabled ?\n"); > > pr_err()? Or checkpatch.pl doesn't complain about it (I forgot)? dev_ would be even better but that seems to be a separate thing. The existing patch is still a move in the right direction. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/12/2011 07:03 AM, Alan Cox wrote: > >> >>> + /* This last case is _NOT_ ok */ >>> + case 0x30: >>> + printk(KERN_ERR "sil680: Clock disabled ?\n"); >> >> pr_err()? Or checkpatch.pl doesn't complain about it (I forgot)? > > dev_ would be even better but that seems to be a separate thing. The > existing patch is still a move in the right direction. agreed x 2 To be specific, it should be dev_err(&pdev->dev -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: b/drivers/ata/pata_sil680.c =================================================================== --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -81,7 +81,8 @@ static unsigned long sil680_seldev(struc * space for us. */ -static int sil680_cable_detect(struct ata_port *ap) { +static int sil680_cable_detect(struct ata_port *ap) +{ struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned long addr = sil680_selreg(ap, 0); u8 ata66; @@ -175,7 +176,7 @@ static void sil680_set_dmamode(struct at mode &= ~(0x03 << port_shift); /* Extract scsc */ - scsc = (scsc & 0x30) ? 1: 0; + scsc = (scsc & 0x30) ? 1 : 0; if (adev->dma_mode >= XFER_UDMA_0) { multi = 0x10C1; @@ -214,7 +215,7 @@ static u8 sil680_init_chip(struct pci_de { u8 tmpbyte = 0; - /* FIXME: double check */ + /* FIXME: double check */ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, pdev->revision ? 1 : 255); @@ -232,22 +233,22 @@ static u8 sil680_init_chip(struct pci_de *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5); #endif - switch(tmpbyte & 0x30) { - case 0x00: - /* 133 clock attempt to force it on */ - pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); - break; - case 0x30: - /* if clocking is disabled */ - /* 133 clock attempt to force it on */ - pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); - break; - case 0x10: - /* 133 already */ - break; - case 0x20: - /* BIOS set PCI x2 clocking */ - break; + switch (tmpbyte & 0x30) { + case 0x00: + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10); + break; + case 0x30: + /* if clocking is disabled */ + /* 133 clock attempt to force it on */ + pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20); + break; + case 0x10: + /* 133 already */ + break; + case 0x20: + /* BIOS set PCI x2 clocking */ + break; } pci_read_config_byte(pdev, 0x8A, &tmpbyte); @@ -265,12 +266,19 @@ static u8 sil680_init_chip(struct pci_de pci_write_config_dword(pdev, 0xB8, 0x43924392); pci_write_config_dword(pdev, 0xBC, 0x40094009); - switch(tmpbyte & 0x30) { - case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break; - case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break; - case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break; - /* This last case is _NOT_ ok */ - case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n"); + switch (tmpbyte & 0x30) { + case 0x00: + printk(KERN_INFO "sil680: 100MHz clock.\n"); + break; + case 0x10: + printk(KERN_INFO "sil680: 133MHz clock.\n"); + break; + case 0x20: + printk(KERN_INFO "sil680: Using PCI clock.\n"); + break; + /* This last case is _NOT_ ok */ + case 0x30: + printk(KERN_ERR "sil680: Clock disabled ?\n"); } return tmpbyte & 0x30; }