| Message ID | 1316588460-4767-3-git-send-email-ajay.bhargav@einfochips.com |
|---|---|
| State | Accepted |
| Headers | show |
> -----Original Message----- > From: Ajay Bhargav [mailto:ajay.bhargav@einfochips.com] > Sent: Wednesday, September 21, 2011 12:31 PM > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; marek.vasut@gmail.com; vapier@gentoo.org; Ajay > Bhargav > Subject: [PATCH v2 3/4] Armada100: Add SPI flash support for Marvell > gplugD > > This patch enables Atmel AT45 SPI flash support for Marvell gplugD > Enables SF commands. > > Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com> > --- > Changes for v2: > - Not changed > > include/configs/gplugd.h | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h > index 527a0c8..260a1dc 100644 > --- a/include/configs/gplugd.h > +++ b/include/configs/gplugd.h > @@ -96,6 +96,10 @@ > #define CONFIG_ENV_SPI_CS 110 > #define CONFIG_SYS_SSP_PORT 2 > > +/* Flash Support */ > +#define CONFIG_CMD_SF > +#define CONFIG_SPI_FLASH_ATMEL > + > /* > * mv-common.h should be defined after CMD configs since it used them > * to enable certain macros > -- Applied to u-boot-marvell.git master branch Regards.. Prafulla . . > 1.7.0.4
> -----Original Message----- > From: Ajay Bhargav [mailto:ajay.bhargav@einfochips.com] > Sent: Wednesday, September 21, 2011 12:31 PM > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; marek.vasut@gmail.com; vapier@gentoo.org; Ajay > Bhargav > Subject: [PATCH v2 3/4] Armada100: Add SPI flash support for Marvell > gplugD > > This patch enables Atmel AT45 SPI flash support for Marvell gplugD > Enables SF commands. > > Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com> > --- > Changes for v2: > - Not changed > > include/configs/gplugd.h | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h > index 527a0c8..260a1dc 100644 > --- a/include/configs/gplugd.h > +++ b/include/configs/gplugd.h > @@ -96,6 +96,10 @@ > #define CONFIG_ENV_SPI_CS 110 > #define CONFIG_SYS_SSP_PORT 2 > > +/* Flash Support */ > +#define CONFIG_CMD_SF > +#define CONFIG_SPI_FLASH_ATMEL > + > /* > * mv-common.h should be defined after CMD configs since it used them > * to enable certain macros > -- > 1.7.0.4 Applied to u-boot-marvell.git master branch Regards.. Prafulla . .
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 527a0c8..260a1dc 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -96,6 +96,10 @@ #define CONFIG_ENV_SPI_CS 110 #define CONFIG_SYS_SSP_PORT 2 +/* Flash Support */ +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_ATMEL + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros
This patch enables Atmel AT45 SPI flash support for Marvell gplugD Enables SF commands. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com> --- Changes for v2: - Not changed include/configs/gplugd.h | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)