| Message ID | 20210508171232.26650-1-vincent.stehle@laposte.net |
|---|---|
| State | Accepted |
| Headers | show |
| Series | configs/uevm5432: new defconfig | expand |
Vincent, All, On 2021-05-08 19:12 +0200, Vincent Stehlé via buildroot spake thusly: > The OMAP5432 uEVM[1] is a development board from Texas Instruments. > > It is similar to the OMAP4 Panda boards, from which this configuration is > inspired. > > [1]: https://svtronics.com/5432 > > Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Applied to next, thanks. Regards, Yann E. MORIN. > --- > DEVELOPERS | 1 + > board/uevm5432/genimage.cfg | 26 +++++++++++++++++++++ > board/uevm5432/readme.txt | 40 ++++++++++++++++++++++++++++++++ > configs/uevm5432_defconfig | 46 +++++++++++++++++++++++++++++++++++++ > 4 files changed, 113 insertions(+) > create mode 100644 board/uevm5432/genimage.cfg > create mode 100644 board/uevm5432/readme.txt > create mode 100644 configs/uevm5432_defconfig > > diff --git a/DEVELOPERS b/DEVELOPERS > index bbbb0ecfa8..fb345e0254 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2709,6 +2709,7 @@ F: package/utp_com/ > N: Vincent Stehlé <vincent.stehle@laposte.net> > F: board/bananapi/bananapi-m2-zero/ > F: configs/bananapi_m2_zero_defconfig > +F: configs/uevm5432_defconfig > F: package/i7z/ > F: package/msr-tools/ > F: package/pixz/ > diff --git a/board/uevm5432/genimage.cfg b/board/uevm5432/genimage.cfg > new file mode 100644 > index 0000000000..f30033f023 > --- /dev/null > +++ b/board/uevm5432/genimage.cfg > @@ -0,0 +1,26 @@ > +image boot.vfat { > + vfat { > + files = { > + "MLO", > + "u-boot.img" > + } > + } > + size = 8M > +} > + > +image sdcard.img { > + hdimage { > + } > + > + partition boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + size = 512M > + } > +} > diff --git a/board/uevm5432/readme.txt b/board/uevm5432/readme.txt > new file mode 100644 > index 0000000000..4569fbd84e > --- /dev/null > +++ b/board/uevm5432/readme.txt > @@ -0,0 +1,40 @@ > +OMAP5432 uEVM > +============= > + > +This file documents the Buildroot support for the OMAP5432 uEVM[1], a > +single-board computer development platform based on the Texas Instruments > +OMAP5432 system on a chip (SoC). > + > +How to build > +============ > + > + $ make uevm5432_defconfig > + $ make > + > +How to write the SD card > +======================== > + > +Once the build process is finished you will have an image called "sdcard.img" > +in the output/images/ directory. > + > +Copy the bootable "sdcard.img" onto an SD card with "dd": > + > + $ sudo dd if=output/images/sdcard.img of=/dev/sdX > + $ sync > + > +Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX instead > +depending on setup). > + > +To boot from SD card, set the SYSBOOT switches S1 of your OMAP5432 uEVM to the > +following position: > + > + ON x x > + x x > + 1 2 3 4 > + > +Insert the micro SDcard in your OMAP5432 uEVM, and power it up with the POWER > +ON push button switch S3. The console is on the micro USB Debug UART, with > +serial settings 115200 8N1. Refer also to the quick start guide[2]. > + > +[1]: https://svtronics.com/5432 > +[2]: https://www.ti.com/lit/ug/swcu131/swcu131.pdf > diff --git a/configs/uevm5432_defconfig b/configs/uevm5432_defconfig > new file mode 100644 > index 0000000000..7b9a4309c6 > --- /dev/null > +++ b/configs/uevm5432_defconfig > @@ -0,0 +1,46 @@ > +# Architecture > +BR2_arm=y > +BR2_cortex_a15=y > +BR2_ARM_FPU_NEON_VFPV4=y > + > +# Linux headers same as kernel, a 5.12 series > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y > + > +# System > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y > +BR2_TARGET_GENERIC_GETTY_PORT="ttyS2" > +BR2_SYSTEM_DHCP="eth0" > + > +# Image > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/uevm5432/genimage.cfg" > + > +# Kernel > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.2" > +BR2_LINUX_KERNEL_DEFCONFIG="omap2plus" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="omap5-uevm" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +# Filesystem > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +# BR2_TARGET_ROOTFS_TAR is not set > + > +# Bootloader > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="omap5_uevm" > +BR2_TARGET_UBOOT_FORMAT_IMG=y > +BR2_TARGET_UBOOT_SPL=y > +BR2_TARGET_UBOOT_SPL_NAME="MLO" > + > +# Required tools to create the SD card image > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y > -- > 2.30.2 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
diff --git a/DEVELOPERS b/DEVELOPERS index bbbb0ecfa8..fb345e0254 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2709,6 +2709,7 @@ F: package/utp_com/ N: Vincent Stehlé <vincent.stehle@laposte.net> F: board/bananapi/bananapi-m2-zero/ F: configs/bananapi_m2_zero_defconfig +F: configs/uevm5432_defconfig F: package/i7z/ F: package/msr-tools/ F: package/pixz/ diff --git a/board/uevm5432/genimage.cfg b/board/uevm5432/genimage.cfg new file mode 100644 index 0000000000..f30033f023 --- /dev/null +++ b/board/uevm5432/genimage.cfg @@ -0,0 +1,26 @@ +image boot.vfat { + vfat { + files = { + "MLO", + "u-boot.img" + } + } + size = 8M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/uevm5432/readme.txt b/board/uevm5432/readme.txt new file mode 100644 index 0000000000..4569fbd84e --- /dev/null +++ b/board/uevm5432/readme.txt @@ -0,0 +1,40 @@ +OMAP5432 uEVM +============= + +This file documents the Buildroot support for the OMAP5432 uEVM[1], a +single-board computer development platform based on the Texas Instruments +OMAP5432 system on a chip (SoC). + +How to build +============ + + $ make uevm5432_defconfig + $ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sync + +Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX instead +depending on setup). + +To boot from SD card, set the SYSBOOT switches S1 of your OMAP5432 uEVM to the +following position: + + ON x x + x x + 1 2 3 4 + +Insert the micro SDcard in your OMAP5432 uEVM, and power it up with the POWER +ON push button switch S3. The console is on the micro USB Debug UART, with +serial settings 115200 8N1. Refer also to the quick start guide[2]. + +[1]: https://svtronics.com/5432 +[2]: https://www.ti.com/lit/ug/swcu131/swcu131.pdf diff --git a/configs/uevm5432_defconfig b/configs/uevm5432_defconfig new file mode 100644 index 0000000000..7b9a4309c6 --- /dev/null +++ b/configs/uevm5432_defconfig @@ -0,0 +1,46 @@ +# Architecture +BR2_arm=y +BR2_cortex_a15=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 5.12 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y + +# System +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS2" +BR2_SYSTEM_DHCP="eth0" + +# Image +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/uevm5432/genimage.cfg" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.2" +BR2_LINUX_KERNEL_DEFCONFIG="omap2plus" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="omap5-uevm" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="omap5_uevm" +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="MLO" + +# Required tools to create the SD card image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y
The OMAP5432 uEVM[1] is a development board from Texas Instruments. It is similar to the OMAP4 Panda boards, from which this configuration is inspired. [1]: https://svtronics.com/5432 Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> --- DEVELOPERS | 1 + board/uevm5432/genimage.cfg | 26 +++++++++++++++++++++ board/uevm5432/readme.txt | 40 ++++++++++++++++++++++++++++++++ configs/uevm5432_defconfig | 46 +++++++++++++++++++++++++++++++++++++ 4 files changed, 113 insertions(+) create mode 100644 board/uevm5432/genimage.cfg create mode 100644 board/uevm5432/readme.txt create mode 100644 configs/uevm5432_defconfig