diff mbox

[3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src

Message ID 1315303120-24203-4-git-send-email-shawn.guo@linaro.org
State New
Headers show

Commit Message

Shawn Guo Sept. 6, 2011, 9:58 a.m. UTC
It adds a number of core drivers support for imx6q, including clock,
General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
System Reset Controller (src).

Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/Kconfig       |   13 +
 arch/arm/mach-imx/Makefile      |    4 +
 arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/gpc.c         |  110 +++
 arch/arm/mach-imx/mmdc.c        |   71 ++
 arch/arm/mach-imx/src.c         |   52 +
 6 files changed, 2240 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-imx/clock-imx6q.c
 create mode 100644 arch/arm/mach-imx/gpc.c
 create mode 100644 arch/arm/mach-imx/mmdc.c
 create mode 100644 arch/arm/mach-imx/src.c

Comments

Arnd Bergmann Sept. 6, 2011, 7:14 p.m. UTC | #1
On Tuesday 06 September 2011 17:58:37 Shawn Guo wrote:
> It adds a number of core drivers support for imx6q, including clock,
> General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
> System Reset Controller (src).
> 
> Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  arch/arm/mach-imx/Kconfig       |   13 +
>  arch/arm/mach-imx/Makefile      |    4 +
>  arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-imx/gpc.c         |  110 +++
>  arch/arm/mach-imx/mmdc.c        |   71 ++
>  arch/arm/mach-imx/src.c         |   52 +
>  6 files changed, 2240 insertions(+), 0 deletions(-)

This is unfortunately still a major problem. I realize that we don't
yet have a good framework to do this with significantly less code,
but adding a platform that is mostly consisting of stupid additions
of clock descriptions that really should be in the device tree does
not scale much longer. We decided to let this still get in for prima2,
which was also ugly in this regard but much simpler than imx6.

My feeling is that this time, we should wait for the common clock
framework to get in and simplify this. I believe Thomas is now planning
to do this, but I haven't followed what the current state is.

The other three drivers in this patch are basically ok, so you can
definitely post them as a separate patch and perhaps get minor comments
for those, similar to what I commented on the other patches.

For the clock-imx6q.c file, what I first want to hear from someone
is how this is supposed to look like in the long run with device tree
integration, and how far away from that we are.

Can you comment on how far we get without the clock driver with imx6?
Is is basically useless, or is there a way we can merge the remaining
imx6 code and other drivers but postpone the large clock driver?

	Arnd
Shawn Guo Sept. 7, 2011, 6:05 a.m. UTC | #2
Hi Arnd,

On Tue, Sep 06, 2011 at 09:14:29PM +0200, Arnd Bergmann wrote:
> On Tuesday 06 September 2011 17:58:37 Shawn Guo wrote:
> > It adds a number of core drivers support for imx6q, including clock,
> > General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
> > System Reset Controller (src).
> > 
> > Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >  arch/arm/mach-imx/Kconfig       |   13 +
> >  arch/arm/mach-imx/Makefile      |    4 +
> >  arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/mach-imx/gpc.c         |  110 +++
> >  arch/arm/mach-imx/mmdc.c        |   71 ++
> >  arch/arm/mach-imx/src.c         |   52 +
> >  6 files changed, 2240 insertions(+), 0 deletions(-)
> 
> This is unfortunately still a major problem.

It's so sad to still get this comment.  Back to Linaro Connect on
Cambridge, I believe I asked for your opinion on new SoC clock support
without waiting for the clock framework.  You said you do not have a
strong position on this and would defer to others' judgement.  Then
I talked to Russell and Grant respectively, and they both agree that
we should not be blocked by the clock framework.  That's why I decided
to start upstreaming imx6q.

> I realize that we don't
> yet have a good framework to do this with significantly less code,
> but adding a platform that is mostly consisting of stupid additions
> of clock descriptions that really should be in the device tree does
> not scale much longer.

I definitely agree this does not scale for long term.  And I would
immediately migrate it to clock framework once it gets ready and put
the description into device tree when clock binding is ready.  Before
we get there, we need a way out.  It's unreasonable for us to hold
the new soc support for an unspecified time.  It's been 20 months since
we saw the common clock patches[1] from Jeremy, and we do not know yet
how many months we still have to wait.  Grant worked out the auxdata to
remove the device tree dependency on clock framework.  I think we
should not get new soc support blocked by clock framework either.

> We decided to let this still get in for prima2,
> which was also ugly in this regard but much simpler than imx6.
> 
It's unfair to me that you reject imx6q clock code just because it's
an implementation for a hardware complexer than prima2.

> My feeling is that this time, we should wait for the common clock
> framework to get in and simplify this. I believe Thomas is now planning
> to do this, but I haven't followed what the current state is.
> 
Sadly, if this is the position of entire arm-soc maintainer group,
I think I have made a wrong decision to start upstreaming imx6q now.

> The other three drivers in this patch are basically ok, so you can
> definitely post them as a separate patch and perhaps get minor comments
> for those, similar to what I commented on the other patches.
> 
> For the clock-imx6q.c file, what I first want to hear from someone
> is how this is supposed to look like in the long run with device tree
> integration, and how far away from that we are.
> 
> Can you comment on how far we get without the clock driver with imx6?
> Is is basically useless, or is there a way we can merge the remaining
> imx6 code and other drivers but postpone the large clock driver?
> 
Unfortunately, clock is pretty fundamental for imx6q support.  Without
clock support, imx6q platform is useless.  We have a real example here.
Back to Dec. 2010, Sascha refused to take clock patch when Freescale
was submitting imx50 platform support, because he thought the clock
framework will get merged pretty soon.  But we end up with the facts
that clock framework is still up in the air and imx50 platform support
on mainline is totally useless.

I have been tried very hard to reduce the LOC of clock-imx6q.c.  It's
a 5K LOC file in the Freescale internal tree.  Now it's 2K LOC.  I know
it's still large enough for you to dislike it.  But this is the clock
that the hardware has.  I'm afraid we can not do much to reduce the LOC
significantly, unless we only implement the small portion other than
the full clock tree, which is what I really hate to do.

Regards,
Shawn

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2010-January/007238.html
Arnd Bergmann Sept. 7, 2011, 7:56 a.m. UTC | #3
On Wednesday 07 September 2011 14:05:03 Shawn Guo wrote:

> > >  arch/arm/mach-imx/Kconfig       |   13 +
> > >  arch/arm/mach-imx/Makefile      |    4 +
> > >  arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
> > >  arch/arm/mach-imx/gpc.c         |  110 +++
> > >  arch/arm/mach-imx/mmdc.c        |   71 ++
> > >  arch/arm/mach-imx/src.c         |   52 +
> > >  6 files changed, 2240 insertions(+), 0 deletions(-)
> > 
> > This is unfortunately still a major problem.
> 
> It's so sad to still get this comment.  Back to Linaro Connect on
> Cambridge, I believe I asked for your opinion on new SoC clock support
> without waiting for the clock framework.  You said you do not have a
> strong position on this and would defer to others' judgement.  Then
> I talked to Russell and Grant respectively, and they both agree that
> we should not be blocked by the clock framework.  That's why I decided
> to start upstreaming imx6q.

I don't mind being overruled on this if Russell, Grant or others have a good
feeling about the clock code going in like this.

I thought that the discussion we had in Cambridge was about migrating the
existing i.mx code to device tree without waiting for the clock framework.
If I misremember that and we had actually made a different decision back
then, then please forgive my overreaction.

> > I realize that we don't
> > yet have a good framework to do this with significantly less code,
> > but adding a platform that is mostly consisting of stupid additions
> > of clock descriptions that really should be in the device tree does
> > not scale much longer.
> 
> I definitely agree this does not scale for long term.  And I would
> immediately migrate it to clock framework once it gets ready and put
> the description into device tree when clock binding is ready.  Before
> we get there, we need a way out.  It's unreasonable for us to hold
> the new soc support for an unspecified time.  It's been 20 months since
> we saw the common clock patches[1] from Jeremy, and we do not know yet
> how many months we still have to wait.  Grant worked out the auxdata to
> remove the device tree dependency on clock framework.  I think we
> should not get new soc support blocked by clock framework either.
> 
> > We decided to let this still get in for prima2,
> > which was also ugly in this regard but much simpler than imx6.
> > 
> It's unfair to me that you reject imx6q clock code just because it's
> an implementation for a hardware complexer than prima2.

We have to stop taking new platform clock code at some point and get
all new platforms to use common code as much as possible. The unresolved
question here is when that will be. My feeling is that prima2 was
borderline and this is too far, but I may be pushing it here given
that we are still waiting for the clock framework to actually get
merged.

However, if there is no pressure at all, we might never see that framework.

> > My feeling is that this time, we should wait for the common clock
> > framework to get in and simplify this. I believe Thomas is now planning
> > to do this, but I haven't followed what the current state is.
> > 
> Sadly, if this is the position of entire arm-soc maintainer group,
> I think I have made a wrong decision to start upstreaming imx6q now.

We haven't discussed it as a group, it's my own opinion.

> > The other three drivers in this patch are basically ok, so you can
> > definitely post them as a separate patch and perhaps get minor comments
> > for those, similar to what I commented on the other patches.
> > 
> > For the clock-imx6q.c file, what I first want to hear from someone
> > is how this is supposed to look like in the long run with device tree
> > integration, and how far away from that we are.
> > 
> > Can you comment on how far we get without the clock driver with imx6?
> > Is is basically useless, or is there a way we can merge the remaining
> > imx6 code and other drivers but postpone the large clock driver?
> > 
> Unfortunately, clock is pretty fundamental for imx6q support.  Without
> clock support, imx6q platform is useless.  We have a real example here.
> Back to Dec. 2010, Sascha refused to take clock patch when Freescale
> was submitting imx50 platform support, because he thought the clock
> framework will get merged pretty soon.  But we end up with the facts
> that clock framework is still up in the air and imx50 platform support
> on mainline is totally useless.
> 
> I have been tried very hard to reduce the LOC of clock-imx6q.c.  It's
> a 5K LOC file in the Freescale internal tree.  Now it's 2K LOC.  I know
> it's still large enough for you to dislike it.  But this is the clock
> that the hardware has.  I'm afraid we can not do much to reduce the LOC
> significantly, unless we only implement the small portion other than
> the full clock tree, which is what I really hate to do.

I actually think that you have done a great job on the code and that it
certainly looks better than a lot of the other implementations that we
have in the tree.

Also, at least half of the code is now real driver code that we won't
be able to reduce any further even with the clock framework. However,
when I look at long sets of DEF_CLK and DEF_*MUX and _REGISTER_CLOCK,
it feels like exactly the stuff that we should be moving into the
device tree and have automatically parsed.

	Arnd
Barry Song Sept. 7, 2011, 12:43 p.m. UTC | #4
2011/9/7 Shawn Guo <shawn.guo@freescale.com>:
> Hi Arnd,
>
> On Tue, Sep 06, 2011 at 09:14:29PM +0200, Arnd Bergmann wrote:
>> On Tuesday 06 September 2011 17:58:37 Shawn Guo wrote:
>> > It adds a number of core drivers support for imx6q, including clock,
>> > General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
>> > System Reset Controller (src).
>> >
>> > Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
>> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
>> > ---
>> >  arch/arm/mach-imx/Kconfig       |   13 +
>> >  arch/arm/mach-imx/Makefile      |    4 +
>> >  arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
>> >  arch/arm/mach-imx/gpc.c         |  110 +++
>> >  arch/arm/mach-imx/mmdc.c        |   71 ++
>> >  arch/arm/mach-imx/src.c         |   52 +
>> >  6 files changed, 2240 insertions(+), 0 deletions(-)
>>
>> This is unfortunately still a major problem.
>
> It's so sad to still get this comment.  Back to Linaro Connect on
> Cambridge, I believe I asked for your opinion on new SoC clock support
> without waiting for the clock framework.  You said you do not have a
> strong position on this and would defer to others' judgement.  Then
> I talked to Russell and Grant respectively, and they both agree that
> we should not be blocked by the clock framework.  That's why I decided
> to start upstreaming imx6q.
>
>> I realize that we don't
>> yet have a good framework to do this with significantly less code,
>> but adding a platform that is mostly consisting of stupid additions
>> of clock descriptions that really should be in the device tree does
>> not scale much longer.
>
> I definitely agree this does not scale for long term.  And I would
> immediately migrate it to clock framework once it gets ready and put
> the description into device tree when clock binding is ready.  Before
> we get there, we need a way out.  It's unreasonable for us to hold
> the new soc support for an unspecified time.  It's been 20 months since
> we saw the common clock patches[1] from Jeremy, and we do not know yet
> how many months we still have to wait.  Grant worked out the auxdata to
> remove the device tree dependency on clock framework.  I think we
> should not get new soc support blocked by clock framework either.
>
>> We decided to let this still get in for prima2,
>> which was also ugly in this regard but much simpler than imx6.
>>
> It's unfair to me that you reject imx6q clock code just because it's
> an implementation for a hardware complexer than prima2.

i understand your feeling.

actually i am also waiting for the common clock framework to finish
the whole prima2 clock tree driver. now prima2 only includes a little
part of clock trees, actually if i list all of them, the file will be
large too. And codes are ugly too.

auxdata is really a temp solution, it really brings many details to
kernel, which should not be in kernel at all.

>
>> My feeling is that this time, we should wait for the common clock
>> framework to get in and simplify this. I believe Thomas is now planning
>> to do this, but I haven't followed what the current state is.
>>
> Sadly, if this is the position of entire arm-soc maintainer group,
> I think I have made a wrong decision to start upstreaming imx6q now.
>
>> The other three drivers in this patch are basically ok, so you can
>> definitely post them as a separate patch and perhaps get minor comments
>> for those, similar to what I commented on the other patches.
>>
>> For the clock-imx6q.c file, what I first want to hear from someone
>> is how this is supposed to look like in the long run with device tree
>> integration, and how far away from that we are.
>>
>> Can you comment on how far we get without the clock driver with imx6?
>> Is is basically useless, or is there a way we can merge the remaining
>> imx6 code and other drivers but postpone the large clock driver?
>>
> Unfortunately, clock is pretty fundamental for imx6q support.  Without
> clock support, imx6q platform is useless.  We have a real example here.
> Back to Dec. 2010, Sascha refused to take clock patch when Freescale
> was submitting imx50 platform support, because he thought the clock
> framework will get merged pretty soon.  But we end up with the facts
> that clock framework is still up in the air and imx50 platform support
> on mainline is totally useless.
>
> I have been tried very hard to reduce the LOC of clock-imx6q.c.  It's
> a 5K LOC file in the Freescale internal tree.  Now it's 2K LOC.  I know
> it's still large enough for you to dislike it.  But this is the clock
> that the hardware has.  I'm afraid we can not do much to reduce the LOC
> significantly, unless we only implement the small portion other than
> the full clock tree, which is what I really hate to do.
>
> Regards,
> Shawn
>
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2010-January/007238.html
>

Thanks
barry
Shawn Guo Sept. 8, 2011, 6:48 a.m. UTC | #5
On Wed, Sep 07, 2011 at 08:43:06PM +0800, Barry Song wrote:
> 2011/9/7 Shawn Guo <shawn.guo@freescale.com>:
> > Hi Arnd,
> >
> > On Tue, Sep 06, 2011 at 09:14:29PM +0200, Arnd Bergmann wrote:
> >> On Tuesday 06 September 2011 17:58:37 Shawn Guo wrote:
> >> > It adds a number of core drivers support for imx6q, including clock,
> >> > General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
> >> > System Reset Controller (src).
> >> >
> >> > Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
> >> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> >> > ---
> >> >  arch/arm/mach-imx/Kconfig       |   13 +
> >> >  arch/arm/mach-imx/Makefile      |    4 +
> >> >  arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
> >> >  arch/arm/mach-imx/gpc.c         |  110 +++
> >> >  arch/arm/mach-imx/mmdc.c        |   71 ++
> >> >  arch/arm/mach-imx/src.c         |   52 +
> >> >  6 files changed, 2240 insertions(+), 0 deletions(-)
> >>
> >> This is unfortunately still a major problem.
> >
> > It's so sad to still get this comment.  Back to Linaro Connect on
> > Cambridge, I believe I asked for your opinion on new SoC clock support
> > without waiting for the clock framework.  You said you do not have a
> > strong position on this and would defer to others' judgement.  Then
> > I talked to Russell and Grant respectively, and they both agree that
> > we should not be blocked by the clock framework.  That's why I decided
> > to start upstreaming imx6q.
> >
> >> I realize that we don't
> >> yet have a good framework to do this with significantly less code,
> >> but adding a platform that is mostly consisting of stupid additions
> >> of clock descriptions that really should be in the device tree does
> >> not scale much longer.
> >
> > I definitely agree this does not scale for long term.  And I would
> > immediately migrate it to clock framework once it gets ready and put
> > the description into device tree when clock binding is ready.  Before
> > we get there, we need a way out.  It's unreasonable for us to hold
> > the new soc support for an unspecified time.  It's been 20 months since
> > we saw the common clock patches[1] from Jeremy, and we do not know yet
> > how many months we still have to wait.  Grant worked out the auxdata to
> > remove the device tree dependency on clock framework.  I think we
> > should not get new soc support blocked by clock framework either.
> >
> >> We decided to let this still get in for prima2,
> >> which was also ugly in this regard but much simpler than imx6.
> >>
> > It's unfair to me that you reject imx6q clock code just because it's
> > an implementation for a hardware complexer than prima2.
> 
> i understand your feeling.
> 
No, you do not :)  With the talking at Cambridge, I thought I'm allowed
to add new platform support without being blocked by clock framework.
That's why I have been worked very hard for 3 weeks to come up with
this patch series.  Now I'm getting a "no", which really frustrates me.

> actually i am also waiting for the common clock framework to finish
> the whole prima2 clock tree driver. now prima2 only includes a little
> part of clock trees, actually if i list all of them, the file will be
> large too. And codes are ugly too.
> 
I did not hear "ugly" from Arnd on imx6q-clock.c.  Instead, he said
the description of the clocks and the tree should be migrated to clock
frame and device tree clock bindings, which unfortunately have not been
available yet.

> auxdata is really a temp solution, it really brings many details to
> kernel, which should not be in kernel at all.
> 
The auxdata was originally designed to be a temp solution.  But we
will see if it's really temp, considering it could also be used to
carry platform callbacks and attach device id.  There are some other
cases beside clock lookup that we have not been able to sort out just
by device tree and will probably have to use auxdata as well.
Barry Song Sept. 11, 2011, 2:28 a.m. UTC | #6
2011/9/8 Shawn Guo <shawn.guo@freescale.com>:
> On Wed, Sep 07, 2011 at 08:43:06PM +0800, Barry Song wrote:
>> 2011/9/7 Shawn Guo <shawn.guo@freescale.com>:
>> > Hi Arnd,
>> >
>> > On Tue, Sep 06, 2011 at 09:14:29PM +0200, Arnd Bergmann wrote:
>> >> On Tuesday 06 September 2011 17:58:37 Shawn Guo wrote:
>> >> > It adds a number of core drivers support for imx6q, including clock,
>> >> > General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
>> >> > System Reset Controller (src).
>> >> >
>> >> > Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
>> >> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
>> >> > ---
>> >> >  arch/arm/mach-imx/Kconfig       |   13 +
>> >> >  arch/arm/mach-imx/Makefile      |    4 +
>> >> >  arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
>> >> >  arch/arm/mach-imx/gpc.c         |  110 +++
>> >> >  arch/arm/mach-imx/mmdc.c        |   71 ++
>> >> >  arch/arm/mach-imx/src.c         |   52 +
>> >> >  6 files changed, 2240 insertions(+), 0 deletions(-)
>> >>
>> >> This is unfortunately still a major problem.
>> >
>> > It's so sad to still get this comment.  Back to Linaro Connect on
>> > Cambridge, I believe I asked for your opinion on new SoC clock support
>> > without waiting for the clock framework.  You said you do not have a
>> > strong position on this and would defer to others' judgement.  Then
>> > I talked to Russell and Grant respectively, and they both agree that
>> > we should not be blocked by the clock framework.  That's why I decided
>> > to start upstreaming imx6q.
>> >
>> >> I realize that we don't
>> >> yet have a good framework to do this with significantly less code,
>> >> but adding a platform that is mostly consisting of stupid additions
>> >> of clock descriptions that really should be in the device tree does
>> >> not scale much longer.
>> >
>> > I definitely agree this does not scale for long term.  And I would
>> > immediately migrate it to clock framework once it gets ready and put
>> > the description into device tree when clock binding is ready.  Before
>> > we get there, we need a way out.  It's unreasonable for us to hold
>> > the new soc support for an unspecified time.  It's been 20 months since
>> > we saw the common clock patches[1] from Jeremy, and we do not know yet
>> > how many months we still have to wait.  Grant worked out the auxdata to
>> > remove the device tree dependency on clock framework.  I think we
>> > should not get new soc support blocked by clock framework either.
>> >
>> >> We decided to let this still get in for prima2,
>> >> which was also ugly in this regard but much simpler than imx6.
>> >>
>> > It's unfair to me that you reject imx6q clock code just because it's
>> > an implementation for a hardware complexer than prima2.
>>
>> i understand your feeling.
>>
> No, you do not :)  With the talking at Cambridge, I thought I'm allowed
> to add new platform support without being blocked by clock framework.
> That's why I have been worked very hard for 3 weeks to come up with
> this patch series.  Now I'm getting a "no", which really frustrates me.
>
>> actually i am also waiting for the common clock framework to finish
>> the whole prima2 clock tree driver. now prima2 only includes a little
>> part of clock trees, actually if i list all of them, the file will be
>> large too. And codes are ugly too.
>>
> I did not hear "ugly" from Arnd on imx6q-clock.c.  Instead, he said
> the description of the clocks and the tree should be migrated to clock
> frame and device tree clock bindings, which unfortunately have not been
> available yet.

i see :-)  might you push other imx6q stuff at first? it looks like
Arnd is really glad with your other files.

>
>> auxdata is really a temp solution, it really brings many details to
>> kernel, which should not be in kernel at all.
>>
> The auxdata was originally designed to be a temp solution.  But we
> will see if it's really temp, considering it could also be used to
> carry platform callbacks and attach device id.  There are some other
> cases beside clock lookup that we have not been able to sort out just
> by device tree and will probably have to use auxdata as well.
>
> --
> Regards,
> Shawn
>
>
-barry
Sascha Hauer Sept. 12, 2011, 9:46 a.m. UTC | #7
On Tue, Sep 06, 2011 at 05:58:37PM +0800, Shawn Guo wrote:
> It adds a number of core drivers support for imx6q, including clock,
> General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
> System Reset Controller (src).
> 
> Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
> new file mode 100644
> index 0000000..95fdd65
> --- /dev/null
> +++ b/arch/arm/mach-imx/src.c
> @@ -0,0 +1,52 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <asm/unified.h>
> +
> +#define SRC_SCR				0x000
> +#define SRC_GPR1			0x020
> +#define BP_SRC_SCR_CORE1_RST		14
> +#define BP_SRC_SCR_CORE1_ENABLE		22
> +
> +static void __iomem *src_base;
> +
> +void imx_enable_cpu(int cpu, bool enable)
> +{
> +	u32 mask, val;
> +
> +	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
> +	val = __raw_readl(src_base + SRC_SCR);
> +	val = enable ? val | mask : val & ~mask;
> +	__raw_writel(val, src_base + SRC_SCR);
> +}
> +
> +void imx_set_cpu_jump(int cpu, void *jump_addr)
> +{
> +	__raw_writel(BSYM(virt_to_phys(jump_addr)),
> +		     src_base + SRC_GPR1 + cpu * 8);
> +}
> +
> +static int __init imx_src_init(void)
> +{
> +	struct device_node *np;
> +
> +	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
> +	src_base = of_iomap(np, 0);
> +	WARN_ON(!src_base);
> +
> +	return 0;
> +}
> +early_initcall(imx_src_init);

What I'm concerned about is that we carefully removed all assumptions
about which SoC the code runs on in the past. Now with this patchset
many of them come back. Here we have a initcall without any check
whether we really run on i.MX6. Above we have a imx_enable_cpu function
but this is really a imx6 specific function. Nevertheless it is called
from generic code in arch/arm/mach-imx/platsmp.c.

We've been there before and it was hard to remove all the implicit
assumptions on which SoC we are on. Please do not reintroduce it.

Sascha
Shawn Guo Sept. 12, 2011, 11:49 a.m. UTC | #8
On Mon, Sep 12, 2011 at 11:46:34AM +0200, Sascha Hauer wrote:
> On Tue, Sep 06, 2011 at 05:58:37PM +0800, Shawn Guo wrote:
> > It adds a number of core drivers support for imx6q, including clock,
> > General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
> > System Reset Controller (src).
> > 
> > Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> > diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
> > new file mode 100644
> > index 0000000..95fdd65
> > --- /dev/null
> > +++ b/arch/arm/mach-imx/src.c
> > @@ -0,0 +1,52 @@
> > +/*
> > + * Copyright 2011 Freescale Semiconductor, Inc.
> > + * Copyright 2011 Linaro Ltd.
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <asm/unified.h>
> > +
> > +#define SRC_SCR				0x000
> > +#define SRC_GPR1			0x020
> > +#define BP_SRC_SCR_CORE1_RST		14
> > +#define BP_SRC_SCR_CORE1_ENABLE		22
> > +
> > +static void __iomem *src_base;
> > +
> > +void imx_enable_cpu(int cpu, bool enable)
> > +{
> > +	u32 mask, val;
> > +
> > +	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
> > +	val = __raw_readl(src_base + SRC_SCR);
> > +	val = enable ? val | mask : val & ~mask;
> > +	__raw_writel(val, src_base + SRC_SCR);
> > +}
> > +
> > +void imx_set_cpu_jump(int cpu, void *jump_addr)
> > +{
> > +	__raw_writel(BSYM(virt_to_phys(jump_addr)),
> > +		     src_base + SRC_GPR1 + cpu * 8);
> > +}
> > +
> > +static int __init imx_src_init(void)
> > +{
> > +	struct device_node *np;
> > +
> > +	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
> > +	src_base = of_iomap(np, 0);
> > +	WARN_ON(!src_base);
> > +
> > +	return 0;
> > +}
> > +early_initcall(imx_src_init);
> 
> What I'm concerned about is that we carefully removed all assumptions
> about which SoC the code runs on in the past. Now with this patchset
> many of them come back. Here we have a initcall without any check
> whether we really run on i.MX6.

The "check" has been done on Kconfig level as below.

config SOC_IMX6Q
        bool "i.MX6 Quad support"
        select HAVE_IMX_SRC

obj-$(CONFIG_HAVE_IMX_SRC) += src.o


> Above we have a imx_enable_cpu function
> but this is really a imx6 specific function.

I would say this is a imx smp specific function.

> Nevertheless it is called
> from generic code in arch/arm/mach-imx/platsmp.c.
> 
> We've been there before and it was hard to remove all the implicit
> assumptions on which SoC we are on. Please do not reintroduce it.
> 
We create platform driver for (talking to) specific device (IP block),
and select the driver for SoCs that have the device.  Anything wrong
with this approach?  Or I missed your point here?
Uwe Kleine-König Sept. 12, 2011, 12:36 p.m. UTC | #9
Hello Shawn,

On Mon, Sep 12, 2011 at 07:49:33PM +0800, Shawn Guo wrote:
> On Mon, Sep 12, 2011 at 11:46:34AM +0200, Sascha Hauer wrote:
> > On Tue, Sep 06, 2011 at 05:58:37PM +0800, Shawn Guo wrote:
> > > +static int __init imx_src_init(void)
> > > +{
> > > +	struct device_node *np;
> > > +
> > > +	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
> > > +	src_base = of_iomap(np, 0);
> > > +	WARN_ON(!src_base);
> > > +
> > > +	return 0;
> > > +}
> > > +early_initcall(imx_src_init);
> > 
> > What I'm concerned about is that we carefully removed all assumptions
> > about which SoC the code runs on in the past. Now with this patchset
> > many of them come back. Here we have a initcall without any check
> > whether we really run on i.MX6.
> 
> The "check" has been done on Kconfig level as below.
> 
> config SOC_IMX6Q
>         bool "i.MX6 Quad support"
>         select HAVE_IMX_SRC
> 
> obj-$(CONFIG_HAVE_IMX_SRC) += src.o
Think multi-SoC-kernel that has SOC_IMX6Q and say SOC_IMX51.

Best regards
Uwe
Arnd Bergmann Sept. 12, 2011, 12:40 p.m. UTC | #10
On Monday 12 September 2011, Uwe Kleine-König wrote:
> On Mon, Sep 12, 2011 at 07:49:33PM +0800, Shawn Guo wrote:
> > On Mon, Sep 12, 2011 at 11:46:34AM +0200, Sascha Hauer wrote:
> > > On Tue, Sep 06, 2011 at 05:58:37PM +0800, Shawn Guo wrote:
> > > > +static int __init imx_src_init(void)
> > > > +{
> > > > + struct device_node *np;
> > > > +
> > > > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
> > > > + src_base = of_iomap(np, 0);
> > > > + WARN_ON(!src_base);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +early_initcall(imx_src_init);
> > > 
> > > What I'm concerned about is that we carefully removed all assumptions
> > > about which SoC the code runs on in the past. Now with this patchset
> > > many of them come back. Here we have a initcall without any check
> > > whether we really run on i.MX6.
> > 
> > The "check" has been done on Kconfig level as below.
> > 
> > config SOC_IMX6Q
> >         bool "i.MX6 Quad support"
> >         select HAVE_IMX_SRC
> > 
> > obj-$(CONFIG_HAVE_IMX_SRC) += src.o
> Think multi-SoC-kernel that has SOC_IMX6Q and say SOC_IMX51.

I think the code is almost ok, since it's only active when there is
a "fsl,imx6q-src" device node. However, the WARN_ON must be removed
if we want this to work well on a multi-soc kernel.

The more important point is to ensure that src_base is not being used
on other SoCs, but that's probably covered as well.

	Arnd
Shawn Guo Sept. 12, 2011, 2:27 p.m. UTC | #11
On Mon, Sep 12, 2011 at 02:40:35PM +0200, Arnd Bergmann wrote:
> On Monday 12 September 2011, Uwe Kleine-König wrote:
> > On Mon, Sep 12, 2011 at 07:49:33PM +0800, Shawn Guo wrote:
> > > On Mon, Sep 12, 2011 at 11:46:34AM +0200, Sascha Hauer wrote:
> > > > On Tue, Sep 06, 2011 at 05:58:37PM +0800, Shawn Guo wrote:
> > > > > +static int __init imx_src_init(void)
> > > > > +{
> > > > > + struct device_node *np;
> > > > > +
> > > > > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
> > > > > + src_base = of_iomap(np, 0);
> > > > > + WARN_ON(!src_base);
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +early_initcall(imx_src_init);
> > > > 
> > > > What I'm concerned about is that we carefully removed all assumptions
> > > > about which SoC the code runs on in the past. Now with this patchset
> > > > many of them come back. Here we have a initcall without any check
> > > > whether we really run on i.MX6.
> > > 
> > > The "check" has been done on Kconfig level as below.
> > > 
> > > config SOC_IMX6Q
> > >         bool "i.MX6 Quad support"
> > >         select HAVE_IMX_SRC
> > > 
> > > obj-$(CONFIG_HAVE_IMX_SRC) += src.o
> > Think multi-SoC-kernel that has SOC_IMX6Q and say SOC_IMX51.
> 
Aha, I did miss the point.  I was misled by "Now with this patchset
many of them come back".  SRC is the only one being called by initcall.
MMDC is a real platform driver.  GPC and Clock init are called by
specific platform code.

> I think the code is almost ok, since it's only active when there is
> a "fsl,imx6q-src" device node. However, the WARN_ON must be removed
> if we want this to work well on a multi-soc kernel.
> 
> The more important point is to ensure that src_base is not being used
> on other SoCs, but that's probably covered as well.
> 
Thanks, Arnd.
Shawn Guo Sept. 12, 2011, 4:12 p.m. UTC | #12
On Wed, Sep 07, 2011 at 09:56:21AM +0200, Arnd Bergmann wrote:
> On Wednesday 07 September 2011 14:05:03 Shawn Guo wrote:
> 
> > > >  arch/arm/mach-imx/Kconfig       |   13 +
> > > >  arch/arm/mach-imx/Makefile      |    4 +
> > > >  arch/arm/mach-imx/clock-imx6q.c | 1990 +++++++++++++++++++++++++++++++++++++++
> > > >  arch/arm/mach-imx/gpc.c         |  110 +++
> > > >  arch/arm/mach-imx/mmdc.c        |   71 ++
> > > >  arch/arm/mach-imx/src.c         |   52 +
> > > >  6 files changed, 2240 insertions(+), 0 deletions(-)
> > > 
> > > This is unfortunately still a major problem.
> > 
> > It's so sad to still get this comment.  Back to Linaro Connect on
> > Cambridge, I believe I asked for your opinion on new SoC clock support
> > without waiting for the clock framework.  You said you do not have a
> > strong position on this and would defer to others' judgement.  Then
> > I talked to Russell and Grant respectively, and they both agree that
> > we should not be blocked by the clock framework.  That's why I decided
> > to start upstreaming imx6q.
> 
> I don't mind being overruled on this if Russell, Grant or others have a good
> feeling about the clock code going in like this.
> 
> I thought that the discussion we had in Cambridge was about migrating the
> existing i.mx code to device tree without waiting for the clock framework.
> If I misremember that and we had actually made a different decision back
> then, then please forgive my overreaction.
> 
> > > I realize that we don't
> > > yet have a good framework to do this with significantly less code,
> > > but adding a platform that is mostly consisting of stupid additions
> > > of clock descriptions that really should be in the device tree does
> > > not scale much longer.
> > 
> > I definitely agree this does not scale for long term.  And I would
> > immediately migrate it to clock framework once it gets ready and put
> > the description into device tree when clock binding is ready.  Before
> > we get there, we need a way out.  It's unreasonable for us to hold
> > the new soc support for an unspecified time.  It's been 20 months since
> > we saw the common clock patches[1] from Jeremy, and we do not know yet
> > how many months we still have to wait.  Grant worked out the auxdata to
> > remove the device tree dependency on clock framework.  I think we
> > should not get new soc support blocked by clock framework either.
> > 
> > > We decided to let this still get in for prima2,
> > > which was also ugly in this regard but much simpler than imx6.
> > > 
> > It's unfair to me that you reject imx6q clock code just because it's
> > an implementation for a hardware complexer than prima2.
> 
> We have to stop taking new platform clock code at some point and get
> all new platforms to use common code as much as possible. The unresolved
> question here is when that will be. My feeling is that prima2 was
> borderline and this is too far, but I may be pushing it here given
> that we are still waiting for the clock framework to actually get
> merged.
> 
> However, if there is no pressure at all, we might never see that framework.
> 
> > > My feeling is that this time, we should wait for the common clock
> > > framework to get in and simplify this. I believe Thomas is now planning
> > > to do this, but I haven't followed what the current state is.
> > > 
> > Sadly, if this is the position of entire arm-soc maintainer group,
> > I think I have made a wrong decision to start upstreaming imx6q now.
> 
> We haven't discussed it as a group, it's my own opinion.
> 

Hi Thomas, Grant,

Could you please share your opinion here?

I really do not see the hope that clock framework and device tree
binding could possibly catch v3.2 window, while I'm hoping that imx6q
series can go into v3.2.

Can you please agree that we can let the imx6q clock code in and then
migrate it to clock framework and device tree once they get ready?

Regards,
Shawn

> > > The other three drivers in this patch are basically ok, so you can
> > > definitely post them as a separate patch and perhaps get minor comments
> > > for those, similar to what I commented on the other patches.
> > > 
> > > For the clock-imx6q.c file, what I first want to hear from someone
> > > is how this is supposed to look like in the long run with device tree
> > > integration, and how far away from that we are.
> > > 
> > > Can you comment on how far we get without the clock driver with imx6?
> > > Is is basically useless, or is there a way we can merge the remaining
> > > imx6 code and other drivers but postpone the large clock driver?
> > > 
> > Unfortunately, clock is pretty fundamental for imx6q support.  Without
> > clock support, imx6q platform is useless.  We have a real example here.
> > Back to Dec. 2010, Sascha refused to take clock patch when Freescale
> > was submitting imx50 platform support, because he thought the clock
> > framework will get merged pretty soon.  But we end up with the facts
> > that clock framework is still up in the air and imx50 platform support
> > on mainline is totally useless.
> > 
> > I have been tried very hard to reduce the LOC of clock-imx6q.c.  It's
> > a 5K LOC file in the Freescale internal tree.  Now it's 2K LOC.  I know
> > it's still large enough for you to dislike it.  But this is the clock
> > that the hardware has.  I'm afraid we can not do much to reduce the LOC
> > significantly, unless we only implement the small portion other than
> > the full clock tree, which is what I really hate to do.
> 
> I actually think that you have done a great job on the code and that it
> certainly looks better than a lot of the other implementations that we
> have in the tree.
> 
> Also, at least half of the code is now real driver code that we won't
> be able to reduce any further even with the clock framework. However,
> when I look at long sets of DEF_CLK and DEF_*MUX and _REGISTER_CLOCK,
> it feels like exactly the stuff that we should be moving into the
> device tree and have automatically parsed.
> 
> 	Arnd
>
Grant Likely Sept. 12, 2011, 7:16 p.m. UTC | #13
On Thu, Sep 08, 2011 at 02:48:35PM +0800, Shawn Guo wrote:
> On Wed, Sep 07, 2011 at 08:43:06PM +0800, Barry Song wrote:
> > auxdata is really a temp solution, it really brings many details to
> > kernel, which should not be in kernel at all.
> > 
> The auxdata was originally designed to be a temp solution.  But we
> will see if it's really temp, considering it could also be used to
> carry platform callbacks and attach device id.  There are some other
> cases beside clock lookup that we have not been able to sort out just
> by device tree and will probably have to use auxdata as well.

auxdata is indeed intended to be a temporary solution, and it is an
absolute requirement that board ports migrate away from it as soon as
feasible (ie. when needed infrastructure for clk, etc, become
available).

However, I don't expect auxdata to ever be completely removed.  There
will always be a handful of boards that require something special to
be provided by board code.  In those cases, auxdata is a perfectly
acceptable solution.

g.
Grant Likely Sept. 12, 2011, 7:40 p.m. UTC | #14
On Tue, Sep 13, 2011 at 12:12:02AM +0800, Shawn Guo wrote:
> On Wed, Sep 07, 2011 at 09:56:21AM +0200, Arnd Bergmann wrote:
> > On Wednesday 07 September 2011 14:05:03 Shawn Guo wrote:
> > > > My feeling is that this time, we should wait for the common clock
> > > > framework to get in and simplify this. I believe Thomas is now planning
> > > > to do this, but I haven't followed what the current state is.
> > > > 
> > > Sadly, if this is the position of entire arm-soc maintainer group,
> > > I think I have made a wrong decision to start upstreaming imx6q now.
> > 
> > We haven't discussed it as a group, it's my own opinion.
> > 
> 
> Hi Thomas, Grant,
> 
> Could you please share your opinion here?
> 
> I really do not see the hope that clock framework and device tree
> binding could possibly catch v3.2 window, while I'm hoping that imx6q
> series can go into v3.2.
> 
> Can you please agree that we can let the imx6q clock code in and then
> migrate it to clock framework and device tree once they get ready?

I've not looked very deeply at this patch, but I completely agree that
we cannot block new platforms on infrastructure that isn't remotely
mergable at this point in time.

However, imx6 is a new platform.  There isn't any non-DT board support
code to continue to support.  At the very least, the configurable
parameters, like what is passed into mx6q_clocks_init() should be
obtained from the device tree (maybe it already does this though, I
haven't looked that closely).

In general, I say merge it.

g.
Arnd Bergmann Sept. 12, 2011, 8:28 p.m. UTC | #15
On Monday 12 September 2011 13:40:33 Grant Likely wrote:
> On Tue, Sep 13, 2011 at 12:12:02AM +0800, Shawn Guo wrote:
> > On Wed, Sep 07, 2011 at 09:56:21AM +0200, Arnd Bergmann wrote:
> > > On Wednesday 07 September 2011 14:05:03 Shawn Guo wrote:
> > > > > My feeling is that this time, we should wait for the common clock
> > > > > framework to get in and simplify this. I believe Thomas is now planning
> > > > > to do this, but I haven't followed what the current state is.
> > > > > 
> > > > Sadly, if this is the position of entire arm-soc maintainer group,
> > > > I think I have made a wrong decision to start upstreaming imx6q now.
> > > 
> > > We haven't discussed it as a group, it's my own opinion.
> > > 
> > 
> > Hi Thomas, Grant,
> > 
> > Could you please share your opinion here?
> > 
> > I really do not see the hope that clock framework and device tree
> > binding could possibly catch v3.2 window, while I'm hoping that imx6q
> > series can go into v3.2.
> > 
> > Can you please agree that we can let the imx6q clock code in and then
> > migrate it to clock framework and device tree once they get ready?
> 
> I've not looked very deeply at this patch, but I completely agree that
> we cannot block new platforms on infrastructure that isn't remotely
> mergable at this point in time.
> 
> However, imx6 is a new platform.  There isn't any non-DT board support
> code to continue to support.  At the very least, the configurable
> parameters, like what is passed into mx6q_clocks_init() should be
> obtained from the device tree (maybe it already does this though, I
> haven't looked that closely).
> 
> In general, I say merge it.

Ok, thanks for taking a look. Do you believe that the clock binding is any
closer to being finalized than the actual code implementing it? I think
it would be very helpful to at least put all the clock related settings
into the device tree in a way that is going to be stable, even if the
code is still in flux.

Moreover, if we have a binding document, we can start implementing code
for one platform and then generalize it later.

	Arnd
Grant Likely Sept. 12, 2011, 9:04 p.m. UTC | #16
On Mon, Sep 12, 2011 at 10:28:27PM +0200, Arnd Bergmann wrote:
> On Monday 12 September 2011 13:40:33 Grant Likely wrote:
> > On Tue, Sep 13, 2011 at 12:12:02AM +0800, Shawn Guo wrote:
> > > On Wed, Sep 07, 2011 at 09:56:21AM +0200, Arnd Bergmann wrote:
> > > > On Wednesday 07 September 2011 14:05:03 Shawn Guo wrote:
> > > > > > My feeling is that this time, we should wait for the common clock
> > > > > > framework to get in and simplify this. I believe Thomas is now planning
> > > > > > to do this, but I haven't followed what the current state is.
> > > > > > 
> > > > > Sadly, if this is the position of entire arm-soc maintainer group,
> > > > > I think I have made a wrong decision to start upstreaming imx6q now.
> > > > 
> > > > We haven't discussed it as a group, it's my own opinion.
> > > > 
> > > 
> > > Hi Thomas, Grant,
> > > 
> > > Could you please share your opinion here?
> > > 
> > > I really do not see the hope that clock framework and device tree
> > > binding could possibly catch v3.2 window, while I'm hoping that imx6q
> > > series can go into v3.2.
> > > 
> > > Can you please agree that we can let the imx6q clock code in and then
> > > migrate it to clock framework and device tree once they get ready?
> > 
> > I've not looked very deeply at this patch, but I completely agree that
> > we cannot block new platforms on infrastructure that isn't remotely
> > mergable at this point in time.
> > 
> > However, imx6 is a new platform.  There isn't any non-DT board support
> > code to continue to support.  At the very least, the configurable
> > parameters, like what is passed into mx6q_clocks_init() should be
> > obtained from the device tree (maybe it already does this though, I
> > haven't looked that closely).
> > 
> > In general, I say merge it.
> 
> Ok, thanks for taking a look. Do you believe that the clock binding is any
> closer to being finalized than the actual code implementing it? I think

Amit is assigning a Linaro engineer to look at it, and there will be a
conference call later this week to look over the work that has been
done with an eye to getting something ready to be merged.  Hopefully
with a full time engineer things will start moving forward again.  We
had a meeting about it at LPC last week.

> it would be very helpful to at least put all the clock related settings
> into the device tree in a way that is going to be stable, even if the
> code is still in flux.
> 
> Moreover, if we have a binding document, we can start implementing code
> for one platform and then generalize it later.

Yes, a binding would be useful, but I still expect that things will be
in flux during these early stages, so there will be some room to
modify insufficient early bindings.

g.
Shawn Guo Sept. 13, 2011, 12:07 a.m. UTC | #17
On Mon, Sep 12, 2011 at 01:40:33PM -0600, Grant Likely wrote:
> On Tue, Sep 13, 2011 at 12:12:02AM +0800, Shawn Guo wrote:
> > On Wed, Sep 07, 2011 at 09:56:21AM +0200, Arnd Bergmann wrote:
> > > On Wednesday 07 September 2011 14:05:03 Shawn Guo wrote:
> > > > > My feeling is that this time, we should wait for the common clock
> > > > > framework to get in and simplify this. I believe Thomas is now planning
> > > > > to do this, but I haven't followed what the current state is.
> > > > > 
> > > > Sadly, if this is the position of entire arm-soc maintainer group,
> > > > I think I have made a wrong decision to start upstreaming imx6q now.
> > > 
> > > We haven't discussed it as a group, it's my own opinion.
> > > 
> > 
> > Hi Thomas, Grant,
> > 
> > Could you please share your opinion here?
> > 
> > I really do not see the hope that clock framework and device tree
> > binding could possibly catch v3.2 window, while I'm hoping that imx6q
> > series can go into v3.2.
> > 
> > Can you please agree that we can let the imx6q clock code in and then
> > migrate it to clock framework and device tree once they get ready?
> 
> I've not looked very deeply at this patch, but I completely agree that
> we cannot block new platforms on infrastructure that isn't remotely
> mergable at this point in time.
> 
> However, imx6 is a new platform.  There isn't any non-DT board support
> code to continue to support.  At the very least, the configurable
> parameters, like what is passed into mx6q_clocks_init() should be
> obtained from the device tree (maybe it already does this though, I
> haven't looked that closely).
> 
Ok, will do in the next post.

> In general, I say merge it.
> 
Thanks, Grant.
Shawn Guo Sept. 15, 2011, 1:26 a.m. UTC | #18
On Mon, Sep 12, 2011 at 10:27:38PM +0800, Shawn Guo wrote:
> On Mon, Sep 12, 2011 at 02:40:35PM +0200, Arnd Bergmann wrote:
> > On Monday 12 September 2011, Uwe Kleine-König wrote:
> > > On Mon, Sep 12, 2011 at 07:49:33PM +0800, Shawn Guo wrote:
> > > > On Mon, Sep 12, 2011 at 11:46:34AM +0200, Sascha Hauer wrote:
> > > > > On Tue, Sep 06, 2011 at 05:58:37PM +0800, Shawn Guo wrote:
> > > > > > +static int __init imx_src_init(void)
> > > > > > +{
> > > > > > + struct device_node *np;
> > > > > > +
> > > > > > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
> > > > > > + src_base = of_iomap(np, 0);
> > > > > > + WARN_ON(!src_base);
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +early_initcall(imx_src_init);
> > > > > 
> > > > > What I'm concerned about is that we carefully removed all assumptions
> > > > > about which SoC the code runs on in the past. Now with this patchset
> > > > > many of them come back. Here we have a initcall without any check
> > > > > whether we really run on i.MX6.
> > > > 
> > > > The "check" has been done on Kconfig level as below.
> > > > 
> > > > config SOC_IMX6Q
> > > >         bool "i.MX6 Quad support"
> > > >         select HAVE_IMX_SRC
> > > > 
> > > > obj-$(CONFIG_HAVE_IMX_SRC) += src.o
> > > Think multi-SoC-kernel that has SOC_IMX6Q and say SOC_IMX51.
> > 
> Aha, I did miss the point.  I was misled by "Now with this patchset
> many of them come back".  SRC is the only one being called by initcall.
> MMDC is a real platform driver.  GPC and Clock init are called by
> specific platform code.
> 
> > I think the code is almost ok, since it's only active when there is
> > a "fsl,imx6q-src" device node. However, the WARN_ON must be removed
> > if we want this to work well on a multi-soc kernel.
> > 
> > The more important point is to ensure that src_base is not being used
> > on other SoCs, but that's probably covered as well.
> > 
> Thanks, Arnd.
> 
I will drop the initcall from imx_src_init() and find some place in
imx6q platform code to call it.
diff mbox

Patch

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4cf5178..30f2868 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@ 
 config IMX_HAVE_DMA_V1
 	bool
+
+config HAVE_IMX_GPC
+	bool
+
+config HAVE_IMX_MMDC
+	bool
+
+config HAVE_IMX_SRC
+	bool
+
 #
 # ARCH_MX31 and ARCH_MX35 are left for compatibility
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
@@ -62,6 +72,9 @@  config SOC_IMX6Q
 	bool
 	select ARM_GIC
 	select CPU_V7
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
 
 if ARCH_MX1
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 96ecc96..8c21fda 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -63,3 +63,7 @@  obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 
 obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
new file mode 100644
index 0000000..7d1bb10
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -0,0 +1,1990 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/div64.h>
+#include <asm/mach/map.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define PLL_BASE		IOMEM(MX6Q_ANATOP_BASE_VADDR)
+#define PLL1_SYS		(PLL_BASE + 0x000)
+#define PLL2_BUS		(PLL_BASE + 0x030)
+#define PLL3_USB_OTG		(PLL_BASE + 0x010)
+#define PLL4_AUDIO		(PLL_BASE + 0x070)
+#define PLL5_VIDEO		(PLL_BASE + 0x0a0)
+#define PLL6_MLB		(PLL_BASE + 0x0d0)
+#define PLL7_USB_HOST		(PLL_BASE + 0x020)
+#define PLL8_ENET		(PLL_BASE + 0x0e0)
+#define PFD_480			(PLL_BASE + 0x0f0)
+#define PFD_528			(PLL_BASE + 0x100)
+#define PLL_NUM_OFFSET		0x010
+#define PLL_DENOM_OFFSET	0x020
+
+#define PFD0			7
+#define PFD1			15
+#define PFD2			23
+#define PFD3			31
+#define PFD_FRAC_MASK		0x3f
+
+#define BM_PLL_BYPASS			(0x1 << 16)
+#define BM_PLL_ENABLE			(0x1 << 13)
+#define BM_PLL_POWER_DOWN		(0x1 << 12)
+#define BM_PLL_LOCK			(0x1 << 31)
+#define BP_PLL_SYS_DIV_SELECT		0
+#define BM_PLL_SYS_DIV_SELECT		(0x7f << 0)
+#define BP_PLL_BUS_DIV_SELECT		0
+#define BM_PLL_BUS_DIV_SELECT		(0x1 << 0)
+#define BP_PLL_USB_DIV_SELECT		0
+#define BM_PLL_USB_DIV_SELECT		(0x3 << 0)
+#define BP_PLL_AV_DIV_SELECT		0
+#define BM_PLL_AV_DIV_SELECT		(0x7f << 0)
+#define BP_PLL_ENET_DIV_SELECT		0
+#define BM_PLL_ENET_DIV_SELECT		(0x3 << 0)
+#define BM_PLL_ENET_EN_PCIE		(0x1 << 19)
+#define BM_PLL_ENET_EN_SATA		(0x1 << 20)
+
+#define CCM_BASE	IOMEM(MX6Q_CCM_BASE_VADDR)
+#define CCR		(CCM_BASE + 0x00)
+#define CCDR		(CCM_BASE + 0x04)
+#define CSR		(CCM_BASE + 0x08)
+#define CCSR		(CCM_BASE + 0x0c)
+#define CACRR		(CCM_BASE + 0x10)
+#define CBCDR		(CCM_BASE + 0x14)
+#define CBCMR		(CCM_BASE + 0x18)
+#define CSCMR1		(CCM_BASE + 0x1c)
+#define CSCMR2		(CCM_BASE + 0x20)
+#define CSCDR1		(CCM_BASE + 0x24)
+#define CS1CDR		(CCM_BASE + 0x28)
+#define CS2CDR		(CCM_BASE + 0x2c)
+#define CDCDR		(CCM_BASE + 0x30)
+#define CHSCCDR		(CCM_BASE + 0x34)
+#define CSCDR2		(CCM_BASE + 0x38)
+#define CSCDR3		(CCM_BASE + 0x3c)
+#define CSCDR4		(CCM_BASE + 0x40)
+#define CWDR		(CCM_BASE + 0x44)
+#define CDHIPR		(CCM_BASE + 0x48)
+#define CDCR		(CCM_BASE + 0x4c)
+#define CTOR		(CCM_BASE + 0x50)
+#define CLPCR		(CCM_BASE + 0x54)
+#define CISR		(CCM_BASE + 0x58)
+#define CIMR		(CCM_BASE + 0x5c)
+#define CCOSR		(CCM_BASE + 0x60)
+#define CGPR		(CCM_BASE + 0x64)
+#define CCGR0		(CCM_BASE + 0x68)
+#define CCGR1		(CCM_BASE + 0x6c)
+#define CCGR2		(CCM_BASE + 0x70)
+#define CCGR3		(CCM_BASE + 0x74)
+#define CCGR4		(CCM_BASE + 0x78)
+#define CCGR5		(CCM_BASE + 0x7c)
+#define CCGR6		(CCM_BASE + 0x80)
+#define CCGR7		(CCM_BASE + 0x84)
+#define CMEOR		(CCM_BASE + 0x88)
+
+#define CG0		0
+#define CG1		2
+#define CG2		4
+#define CG3		6
+#define CG4		8
+#define CG5		10
+#define CG6		12
+#define CG7		14
+#define CG8		16
+#define CG9		18
+#define CG10		20
+#define CG11		22
+#define CG12		24
+#define CG13		26
+#define CG14		28
+#define CG15		30
+
+#define BM_CCSR_PLL1_SW_SEL		(0x1 << 2)
+#define BM_CCSR_STEP_SEL		(0x1 << 8)
+
+#define BP_CACRR_ARM_PODF		0
+#define BM_CACRR_ARM_PODF		(0x7 << 0)
+
+#define BP_CBCDR_PERIPH2_CLK2_PODF	0
+#define BM_CBCDR_PERIPH2_CLK2_PODF	(0x7 << 0)
+#define BP_CBCDR_MMDC_CH1_AXI_PODF	3
+#define BM_CBCDR_MMDC_CH1_AXI_PODF	(0x7 << 3)
+#define BP_CBCDR_AXI_SEL		6
+#define BM_CBCDR_AXI_SEL		(0x3 << 6)
+#define BP_CBCDR_IPG_PODF		8
+#define BM_CBCDR_IPG_PODF		(0x3 << 8)
+#define BP_CBCDR_AHB_PODF		10
+#define BM_CBCDR_AHB_PODF		(0x7 << 10)
+#define BP_CBCDR_AXI_PODF		16
+#define BM_CBCDR_AXI_PODF		(0x7 << 16)
+#define BP_CBCDR_MMDC_CH0_AXI_PODF	19
+#define BM_CBCDR_MMDC_CH0_AXI_PODF	(0x7 << 19)
+#define BP_CBCDR_PERIPH_CLK_SEL		25
+#define BM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
+#define BP_CBCDR_PERIPH2_CLK_SEL	26
+#define BM_CBCDR_PERIPH2_CLK_SEL	(0x1 << 26)
+#define BP_CBCDR_PERIPH_CLK2_PODF	27
+#define BM_CBCDR_PERIPH_CLK2_PODF	(0x7 << 27)
+
+#define BP_CBCMR_GPU2D_AXI_SEL		0
+#define BM_CBCMR_GPU2D_AXI_SEL		(0x1 << 0)
+#define BP_CBCMR_GPU3D_AXI_SEL		1
+#define BM_CBCMR_GPU3D_AXI_SEL		(0x1 << 1)
+#define BP_CBCMR_GPU3D_CORE_SEL		4
+#define BM_CBCMR_GPU3D_CORE_SEL		(0x3 << 4)
+#define BP_CBCMR_GPU3D_SHADER_SEL	8
+#define BM_CBCMR_GPU3D_SHADER_SEL	(0x3 << 8)
+#define BP_CBCMR_PCIE_AXI_SEL		10
+#define BM_CBCMR_PCIE_AXI_SEL		(0x1 << 10)
+#define BP_CBCMR_VDO_AXI_SEL		11
+#define BM_CBCMR_VDO_AXI_SEL		(0x1 << 11)
+#define BP_CBCMR_PERIPH_CLK2_SEL	12
+#define BM_CBCMR_PERIPH_CLK2_SEL	(0x3 << 12)
+#define BP_CBCMR_VPU_AXI_SEL		14
+#define BM_CBCMR_VPU_AXI_SEL		(0x3 << 14)
+#define BP_CBCMR_GPU2D_CORE_SEL		16
+#define BM_CBCMR_GPU2D_CORE_SEL		(0x3 << 16)
+#define BP_CBCMR_PRE_PERIPH_CLK_SEL	18
+#define BM_CBCMR_PRE_PERIPH_CLK_SEL	(0x3 << 18)
+#define BP_CBCMR_PERIPH2_CLK2_SEL	20
+#define BM_CBCMR_PERIPH2_CLK2_SEL	(0x1 << 20)
+#define BP_CBCMR_PRE_PERIPH2_CLK_SEL	21
+#define BM_CBCMR_PRE_PERIPH2_CLK_SEL	(0x3 << 21)
+#define BP_CBCMR_GPU2D_CORE_PODF	23
+#define BM_CBCMR_GPU2D_CORE_PODF	(0x7 << 23)
+#define BP_CBCMR_GPU3D_CORE_PODF	26
+#define BM_CBCMR_GPU3D_CORE_PODF	(0x7 << 26)
+#define BP_CBCMR_GPU3D_SHADER_PODF	29
+#define BM_CBCMR_GPU3D_SHADER_PODF	(0x7 << 29)
+
+#define BP_CSCMR1_PERCLK_PODF		0
+#define BM_CSCMR1_PERCLK_PODF		(0x3f << 0)
+#define BP_CSCMR1_SSI1_SEL		10
+#define BM_CSCMR1_SSI1_SEL		(0x3 << 10)
+#define BP_CSCMR1_SSI2_SEL		12
+#define BM_CSCMR1_SSI2_SEL		(0x3 << 12)
+#define BP_CSCMR1_SSI3_SEL		14
+#define BM_CSCMR1_SSI3_SEL		(0x3 << 14)
+#define BP_CSCMR1_USDHC1_SEL		16
+#define BM_CSCMR1_USDHC1_SEL		(0x1 << 16)
+#define BP_CSCMR1_USDHC2_SEL		17
+#define BM_CSCMR1_USDHC2_SEL		(0x1 << 17)
+#define BP_CSCMR1_USDHC3_SEL		18
+#define BM_CSCMR1_USDHC3_SEL		(0x1 << 18)
+#define BP_CSCMR1_USDHC4_SEL		19
+#define BM_CSCMR1_USDHC4_SEL		(0x1 << 19)
+#define BP_CSCMR1_EMI_PODF		20
+#define BM_CSCMR1_EMI_PODF		(0x7 << 20)
+#define BP_CSCMR1_EMI_SLOW_PODF		23
+#define BM_CSCMR1_EMI_SLOW_PODF		(0x7 << 23)
+#define BP_CSCMR1_EMI_SEL		27
+#define BM_CSCMR1_EMI_SEL		(0x3 << 27)
+#define BP_CSCMR1_EMI_SLOW_SEL		29
+#define BM_CSCMR1_EMI_SLOW_SEL		(0x3 << 29)
+
+#define BP_CSCMR2_CAN_PODF		2
+#define BM_CSCMR2_CAN_PODF		(0x3f << 2)
+#define BM_CSCMR2_LDB_DI0_IPU_DIV	(0x1 << 10)
+#define BM_CSCMR2_LDB_DI1_IPU_DIV	(0x1 << 11)
+#define BP_CSCMR2_ESAI_SEL		19
+#define BM_CSCMR2_ESAI_SEL		(0x3 << 19)
+
+#define BP_CSCDR1_UART_PODF		0
+#define BM_CSCDR1_UART_PODF		(0x3f << 0)
+#define BP_CSCDR1_USDHC1_PODF		11
+#define BM_CSCDR1_USDHC1_PODF		(0x7 << 11)
+#define BP_CSCDR1_USDHC2_PODF		16
+#define BM_CSCDR1_USDHC2_PODF		(0x7 << 16)
+#define BP_CSCDR1_USDHC3_PODF		19
+#define BM_CSCDR1_USDHC3_PODF		(0x7 << 19)
+#define BP_CSCDR1_USDHC4_PODF		22
+#define BM_CSCDR1_USDHC4_PODF		(0x7 << 22)
+#define BP_CSCDR1_VPU_AXI_PODF		25
+#define BM_CSCDR1_VPU_AXI_PODF		(0x7 << 25)
+
+#define BP_CS1CDR_SSI1_PODF		0
+#define BM_CS1CDR_SSI1_PODF		(0x3f << 0)
+#define BP_CS1CDR_SSI1_PRED		6
+#define BM_CS1CDR_SSI1_PRED		(0x7 << 6)
+#define BP_CS1CDR_ESAI_PRED		9
+#define BM_CS1CDR_ESAI_PRED		(0x7 << 9)
+#define BP_CS1CDR_SSI3_PODF		16
+#define BM_CS1CDR_SSI3_PODF		(0x3f << 16)
+#define BP_CS1CDR_SSI3_PRED		22
+#define BM_CS1CDR_SSI3_PRED		(0x7 << 22)
+#define BP_CS1CDR_ESAI_PODF		25
+#define BM_CS1CDR_ESAI_PODF		(0x7 << 25)
+
+#define BP_CS2CDR_SSI2_PODF		0
+#define BM_CS2CDR_SSI2_PODF		(0x3f << 0)
+#define BP_CS2CDR_SSI2_PRED		6
+#define BM_CS2CDR_SSI2_PRED		(0x7 << 6)
+#define BP_CS2CDR_LDB_DI0_SEL		9
+#define BM_CS2CDR_LDB_DI0_SEL		(0x7 << 9)
+#define BP_CS2CDR_LDB_DI1_SEL		12
+#define BM_CS2CDR_LDB_DI1_SEL		(0x7 << 12)
+#define BP_CS2CDR_ENFC_SEL		16
+#define BM_CS2CDR_ENFC_SEL		(0x3 << 16)
+#define BP_CS2CDR_ENFC_PRED		18
+#define BM_CS2CDR_ENFC_PRED		(0x7 << 18)
+#define BP_CS2CDR_ENFC_PODF		21
+#define BM_CS2CDR_ENFC_PODF		(0x3f << 21)
+
+#define BP_CDCDR_ASRC_SERIAL_SEL	7
+#define BM_CDCDR_ASRC_SERIAL_SEL	(0x3 << 7)
+#define BP_CDCDR_ASRC_SERIAL_PODF	9
+#define BM_CDCDR_ASRC_SERIAL_PODF	(0x7 << 9)
+#define BP_CDCDR_ASRC_SERIAL_PRED	12
+#define BM_CDCDR_ASRC_SERIAL_PRED	(0x7 << 12)
+#define BP_CDCDR_SPDIF_SEL		20
+#define BM_CDCDR_SPDIF_SEL		(0x3 << 20)
+#define BP_CDCDR_SPDIF_PODF		22
+#define BM_CDCDR_SPDIF_PODF		(0x7 << 22)
+#define BP_CDCDR_SPDIF_PRED		25
+#define BM_CDCDR_SPDIF_PRED		(0x7 << 25)
+#define BP_CDCDR_HSI_TX_PODF		29
+#define BM_CDCDR_HSI_TX_PODF		(0x7 << 29)
+#define BP_CDCDR_HSI_TX_SEL		28
+#define BM_CDCDR_HSI_TX_SEL		(0x1 << 28)
+
+#define BP_CHSCCDR_IPU1_DI0_SEL		0
+#define BM_CHSCCDR_IPU1_DI0_SEL		(0x7 << 0)
+#define BP_CHSCCDR_IPU1_DI0_PRE_PODF	3
+#define BM_CHSCCDR_IPU1_DI0_PRE_PODF	(0x7 << 3)
+#define BP_CHSCCDR_IPU1_DI0_PRE_SEL	6
+#define BM_CHSCCDR_IPU1_DI0_PRE_SEL	(0x7 << 6)
+#define BP_CHSCCDR_IPU1_DI1_SEL		9
+#define BM_CHSCCDR_IPU1_DI1_SEL		(0x7 << 9)
+#define BP_CHSCCDR_IPU1_DI1_PRE_PODF	12
+#define BM_CHSCCDR_IPU1_DI1_PRE_PODF	(0x7 << 12)
+#define BP_CHSCCDR_IPU1_DI1_PRE_SEL	15
+#define BM_CHSCCDR_IPU1_DI1_PRE_SEL	(0x7 << 15)
+
+#define BP_CSCDR2_IPU2_DI0_SEL		0
+#define BM_CSCDR2_IPU2_DI0_SEL		(0x7)
+#define BP_CSCDR2_IPU2_DI0_PRE_PODF	3
+#define BM_CSCDR2_IPU2_DI0_PRE_PODF	(0x7 << 3)
+#define BP_CSCDR2_IPU2_DI0_PRE_SEL	6
+#define BM_CSCDR2_IPU2_DI0_PRE_SEL	(0x7 << 6)
+#define BP_CSCDR2_IPU2_DI1_SEL		9
+#define BM_CSCDR2_IPU2_DI1_SEL		(0x7 << 9)
+#define BP_CSCDR2_IPU2_DI1_PRE_PODF	12
+#define BM_CSCDR2_IPU2_DI1_PRE_PODF	(0x7 << 12)
+#define BP_CSCDR2_IPU2_DI1_PRE_SEL	15
+#define BM_CSCDR2_IPU2_DI1_PRE_SEL	(0x7 << 15)
+#define BP_CSCDR2_ECSPI_CLK_PODF	19
+#define BM_CSCDR2_ECSPI_CLK_PODF	(0x3f << 19)
+
+#define BP_CSCDR3_IPU1_HSP_SEL		9
+#define BM_CSCDR3_IPU1_HSP_SEL		(0x3 << 9)
+#define BP_CSCDR3_IPU1_HSP_PODF		11
+#define BM_CSCDR3_IPU1_HSP_PODF		(0x7 << 11)
+#define BP_CSCDR3_IPU2_HSP_SEL		14
+#define BM_CSCDR3_IPU2_HSP_SEL		(0x3 << 14)
+#define BP_CSCDR3_IPU2_HSP_PODF		16
+#define BM_CSCDR3_IPU2_HSP_PODF		(0x7 << 16)
+
+#define BM_CDHIPR_AXI_PODF_BUSY		(0x1 << 0)
+#define BM_CDHIPR_AHB_PODF_BUSY		(0x1 << 1)
+#define BM_CDHIPR_MMDC_CH1_PODF_BUSY	(0x1 << 2)
+#define BM_CDHIPR_PERIPH2_SEL_BUSY	(0x1 << 3)
+#define BM_CDHIPR_MMDC_CH0_PODF_BUSY	(0x1 << 4)
+#define BM_CDHIPR_PERIPH_SEL_BUSY	(0x1 << 5)
+#define BM_CDHIPR_ARM_PODF_BUSY		(0x1 << 16)
+
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define FREQ_480M	480000000
+#define FREQ_528M	528000000
+#define FREQ_594M	594000000
+#define FREQ_650M	650000000
+#define FREQ_1300M	1300000000
+
+static struct clk pll1_sys;
+static struct clk pll2_bus;
+static struct clk pll3_usb_otg;
+static struct clk pll4_audio;
+static struct clk pll5_video;
+static struct clk pll6_mlb;
+static struct clk pll7_usb_host;
+static struct clk pll8_enet;
+static struct clk apbh_dma_clk;
+static struct clk arm_clk;
+static struct clk ipg_clk;
+static struct clk ahb_clk;
+static struct clk axi_clk;
+static struct clk mmdc_ch0_axi_clk;
+static struct clk mmdc_ch1_axi_clk;
+static struct clk periph_clk;
+static struct clk periph_pre_clk;
+static struct clk periph_clk2_clk;
+static struct clk periph2_clk;
+static struct clk periph2_pre_clk;
+static struct clk periph2_clk2_clk;
+static struct clk gpu2d_core_clk;
+static struct clk gpu3d_core_clk;
+static struct clk gpu3d_shader_clk;
+static struct clk ipg_perclk;
+static struct clk emi_clk;
+static struct clk emi_slow_clk;
+static struct clk can1_clk;
+static struct clk uart_clk;
+static struct clk usdhc1_clk;
+static struct clk usdhc2_clk;
+static struct clk usdhc3_clk;
+static struct clk usdhc4_clk;
+static struct clk vpu_clk;
+static struct clk hsi_tx_clk;
+static struct clk ipu1_di0_pre_clk;
+static struct clk ipu1_di1_pre_clk;
+static struct clk ipu2_di0_pre_clk;
+static struct clk ipu2_di1_pre_clk;
+static struct clk ipu1_clk;
+static struct clk ipu2_clk;
+static struct clk ssi1_clk;
+static struct clk ssi3_clk;
+static struct clk esai_clk;
+static struct clk ssi2_clk;
+static struct clk spdif_clk;
+static struct clk asrc_serial_clk;
+static struct clk gpu2d_axi_clk;
+static struct clk gpu3d_axi_clk;
+static struct clk pcie_clk;
+static struct clk vdo_axi_clk;
+static struct clk ldb_di0_clk;
+static struct clk ldb_di1_clk;
+static struct clk ipu1_di0_clk;
+static struct clk ipu1_di1_clk;
+static struct clk ipu2_di0_clk;
+static struct clk ipu2_di1_clk;
+static struct clk enfc_clk;
+static struct clk dummy_clk = {};
+
+static unsigned long external_high_reference;
+static unsigned long external_low_reference;
+static unsigned long oscillator_reference;
+static unsigned long ckih2_reference;
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+	return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+	return ckih2_reference;
+}
+
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+	.get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+	.get_rate = get_oscillator_reference_clock_rate,
+};
+
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+static inline void __iomem *pll_get_reg_addr(struct clk *pll)
+{
+	if (pll == &pll1_sys)
+		return PLL1_SYS;
+	else if (pll == &pll2_bus)
+		return PLL2_BUS;
+	else if (pll == &pll3_usb_otg)
+		return PLL3_USB_OTG;
+	else if (pll == &pll4_audio)
+		return PLL4_AUDIO;
+	else if (pll == &pll5_video)
+		return PLL5_VIDEO;
+	else if (pll == &pll6_mlb)
+		return PLL6_MLB;
+	else if (pll == &pll7_usb_host)
+		return PLL7_USB_HOST;
+	else if (pll == &pll8_enet)
+		return PLL8_ENET;
+	else
+		BUG();
+
+	return NULL;
+}
+
+static int pll_enable(struct clk *clk)
+{
+	int timeout = 0x100000;
+	void __iomem *reg;
+	u32 val;
+
+	reg = pll_get_reg_addr(clk);
+	val = __raw_readl(reg);
+	val &= ~BM_PLL_BYPASS;
+	val &= ~BM_PLL_POWER_DOWN;
+	/* 480MHz PLLs have the opposite definition for power bit */
+	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+		val |= BM_PLL_POWER_DOWN;
+	__raw_writel(val, reg);
+
+	/* Wait for PLL to lock */
+	while (!(__raw_readl(reg) & BM_PLL_LOCK) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		return -EBUSY;
+
+	/* Enable the PLL output now */
+	val = __raw_readl(reg);
+	val |= BM_PLL_ENABLE;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static void pll_disable(struct clk *clk)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = pll_get_reg_addr(clk);
+	val = __raw_readl(reg);
+	val &= ~BM_PLL_ENABLE;
+	val |= BM_PLL_BYPASS;
+	val |= BM_PLL_POWER_DOWN;
+	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+		val &= ~BM_PLL_POWER_DOWN;
+	__raw_writel(val, reg);
+}
+
+static unsigned long pll1_sys_get_rate(struct clk *clk)
+{
+	u32 div = (__raw_readl(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
+		  BP_PLL_SYS_DIV_SELECT;
+
+	return clk_get_rate(clk->parent) * div / 2;
+}
+
+static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val, div;
+
+	if (rate < FREQ_650M || rate > FREQ_1300M)
+		return -EINVAL;
+
+	div = rate * 2 / clk_get_rate(clk->parent);
+	val = __raw_readl(PLL1_SYS);
+	val &= ~BM_PLL_SYS_DIV_SELECT;
+	val |= div << BP_PLL_SYS_DIV_SELECT;
+	__raw_writel(val, PLL1_SYS);
+
+	return 0;
+}
+
+static unsigned long pll8_enet_get_rate(struct clk *clk)
+{
+	u32 div = (__raw_readl(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
+		  BP_PLL_ENET_DIV_SELECT;
+
+	return 500000000 / (div + 1);
+}
+
+static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val, div;
+
+	switch (rate) {
+	case 25000000:
+		div = 0;
+		break;
+	case 50000000:
+		div = 1;
+		break;
+	case 100000000:
+		div = 2;
+		break;
+	case 125000000:
+		div = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = __raw_readl(PLL8_ENET);
+	val &= ~BM_PLL_ENET_DIV_SELECT;
+	val |= div << BP_PLL_ENET_DIV_SELECT;
+	__raw_writel(val, PLL8_ENET);
+
+	return 0;
+}
+
+static unsigned long pll_av_get_rate(struct clk *clk)
+{
+	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	u32 mfn = __raw_readl(reg + PLL_NUM_OFFSET);
+	u32 mfd = __raw_readl(reg + PLL_DENOM_OFFSET);
+	u32 div = (__raw_readl(reg) & BM_PLL_AV_DIV_SELECT) >>
+		  BP_PLL_AV_DIV_SELECT;
+
+	return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static int pll_av_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+	unsigned int parent_rate = clk_get_rate(clk->parent);
+	u32 val, div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate < FREQ_650M || rate > FREQ_1300M)
+		return -EINVAL;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	val = __raw_readl(reg);
+	val &= ~BM_PLL_AV_DIV_SELECT;
+	val |= div << BP_PLL_AV_DIV_SELECT;
+	__raw_writel(val, reg);
+	__raw_writel(mfn, reg + PLL_NUM_OFFSET);
+	__raw_writel(mfd, reg + PLL_DENOM_OFFSET);
+
+	return 0;
+}
+
+static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
+{
+	void __iomem *reg;
+
+	if (clk == &pll2_bus) {
+		reg = PLL2_BUS;
+		*bp = BP_PLL_BUS_DIV_SELECT;
+		*bm = BM_PLL_BUS_DIV_SELECT;
+	} else if (clk == &pll3_usb_otg) {
+		reg = PLL3_USB_OTG;
+		*bp = BP_PLL_USB_DIV_SELECT;
+		*bm = BM_PLL_USB_DIV_SELECT;
+	} else if (clk == &pll7_usb_host) {
+		reg = PLL7_USB_HOST;
+		*bp = BP_PLL_USB_DIV_SELECT;
+		*bm = BM_PLL_USB_DIV_SELECT;
+	} else {
+		BUG();
+	}
+
+	return reg;
+}
+
+static unsigned long pll_get_rate(struct clk *clk)
+{
+	void __iomem *reg;
+	u32 div, bp, bm;
+
+	reg = pll_get_div_reg_bit(clk, &bp, &bm);
+	div = (__raw_readl(reg) & bm) >> bp;
+
+	return (div == 1) ? clk_get_rate(clk->parent) * 22 :
+			    clk_get_rate(clk->parent) * 20;
+}
+
+static int pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *reg;
+	u32 val, div, bp, bm;
+
+	if (rate == FREQ_528M)
+		div = 1;
+	else if (rate == FREQ_480M)
+		div = 0;
+	else
+		return -EINVAL;
+
+	reg = pll_get_div_reg_bit(clk, &bp, &bm);
+	val = __raw_readl(reg);
+	val &= ~bm;
+	val |= div << bp;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+#define pll2_bus_get_rate	pll_get_rate
+#define pll2_bus_set_rate	pll_set_rate
+#define pll3_usb_otg_get_rate	pll_get_rate
+#define pll3_usb_otg_set_rate	pll_set_rate
+#define pll7_usb_host_get_rate	pll_get_rate
+#define pll7_usb_host_set_rate	pll_set_rate
+#define pll4_audio_get_rate	pll_av_get_rate
+#define pll4_audio_set_rate	pll_av_set_rate
+#define pll5_video_get_rate	pll_av_get_rate
+#define pll5_video_set_rate	pll_av_set_rate
+#define pll6_mlb_get_rate	NULL
+#define pll6_mlb_set_rate	NULL
+
+#define DEF_PLL(name)					\
+	static struct clk name = {			\
+		.enable		= pll_enable,		\
+		.disable	= pll_disable,		\
+		.get_rate	= name##_get_rate,	\
+		.set_rate	= name##_set_rate,	\
+		.parent		= &osc_clk,		\
+	}
+
+DEF_PLL(pll1_sys);
+DEF_PLL(pll2_bus);
+DEF_PLL(pll3_usb_otg);
+DEF_PLL(pll4_audio);
+DEF_PLL(pll5_video);
+DEF_PLL(pll6_mlb);
+DEF_PLL(pll7_usb_host);
+DEF_PLL(pll8_enet);
+
+static unsigned long pfd_get_rate(struct clk *clk)
+{
+	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+	u32 frac, bp_frac;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	bp_frac = clk->enable_shift - 7;
+	frac = __raw_readl(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int pfd_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val, frac, bp_frac;
+	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	/*
+	 * Round up the divider so that we don't set a rate
+	 * higher than what is requested
+	 */
+	tmp += rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	frac = (frac < 12) ? 12 : frac;
+	frac = (frac > 35) ? 35 : frac;
+
+	/*
+	 * The frac field always starts from 7 bits lower
+	 * position of enable bit
+	 */
+	bp_frac = clk->enable_shift - 7;
+	val = __raw_readl(clk->enable_reg);
+	val &= ~(PFD_FRAC_MASK << bp_frac);
+	val |= frac << bp_frac;
+	__raw_writel(val, clk->enable_reg);
+
+	tmp = (u64) clk_get_rate(clk->parent) * 18;
+	do_div(tmp, frac);
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.disable(&apbh_dma_clk);
+
+	return 0;
+}
+
+static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 frac;
+	u64 tmp;
+
+	tmp = (u64) clk_get_rate(clk->parent) * 18;
+	tmp += rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	frac = (frac < 12) ? 12 : frac;
+	frac = (frac > 35) ? 35 : frac;
+	tmp = (u64) clk_get_rate(clk->parent) * 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int pfd_enable(struct clk *clk)
+{
+	u32 val;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	val = __raw_readl(clk->enable_reg);
+	val &= ~(1 << clk->enable_shift);
+	__raw_writel(val, clk->enable_reg);
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.disable(&apbh_dma_clk);
+
+	return 0;
+}
+
+static void pfd_disable(struct clk *clk)
+{
+	u32 val;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	val = __raw_readl(clk->enable_reg);
+	val |= 1 << clk->enable_shift;
+	__raw_writel(val, clk->enable_reg);
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.disable(&apbh_dma_clk);
+}
+
+#define DEF_PFD(name, er, es, p)			\
+	static struct clk name = {			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.enable		= pfd_enable,		\
+		.disable	= pfd_disable,		\
+		.get_rate	= pfd_get_rate,		\
+		.set_rate	= pfd_set_rate,		\
+		.round_rate	= pfd_round_rate,	\
+		.parent		= p,			\
+	}
+
+DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
+DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
+DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
+DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
+
+static unsigned long pll2_200m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk pll2_200m = {
+	.parent = &pll2_pfd_400m,
+	.get_rate = pll2_200m_get_rate,
+};
+
+static unsigned long pll3_120m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 4;
+}
+
+static struct clk pll3_120m = {
+	.parent = &pll3_usb_otg,
+	.get_rate = pll3_120m_get_rate,
+};
+
+static unsigned long pll3_80m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 6;
+}
+
+static struct clk pll3_80m = {
+	.parent = &pll3_usb_otg,
+	.get_rate = pll3_80m_get_rate,
+};
+
+static unsigned long pll3_60m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 8;
+}
+
+static struct clk pll3_60m = {
+	.parent = &pll3_usb_otg,
+	.get_rate = pll3_60m_get_rate,
+};
+
+static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 val = __raw_readl(CCSR);
+
+	if (parent == &pll1_sys) {
+		val &= ~BM_CCSR_PLL1_SW_SEL;
+		val &= ~BM_CCSR_STEP_SEL;
+	} else if (parent == &osc_clk) {
+		val |= BM_CCSR_PLL1_SW_SEL;
+		val &= ~BM_CCSR_STEP_SEL;
+	} else if (parent == &pll2_pfd_400m) {
+		val |= BM_CCSR_PLL1_SW_SEL;
+		val |= BM_CCSR_STEP_SEL;
+	} else {
+		return -EINVAL;
+	}
+
+	__raw_writel(val, CCSR);
+
+	return 0;
+}
+
+static struct clk pll1_sw_clk = {
+	.parent = &pll1_sys,
+	.set_parent = pll1_sw_clk_set_parent,
+};
+
+static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
+{
+	u32 min_pred, temp_pred, old_err, err;
+
+	if (div >= 512) {
+		*pred = 8;
+		*podf = 64;
+	} else if (div >= 8) {
+		min_pred = (div - 1) / 64 + 1;
+		old_err = 8;
+		for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
+			err = div % temp_pred;
+			if (err == 0) {
+				*pred = temp_pred;
+				break;
+			}
+			err = temp_pred - err;
+			if (err < old_err) {
+				old_err = err;
+				*pred = temp_pred;
+			}
+		}
+		*podf = (div + *pred - 1) / *pred;
+	} else if (div < 8) {
+		*pred = div;
+		*podf = 1;
+	}
+}
+
+static int _clk_enable(struct clk *clk)
+{
+	u32 reg;
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 0x3 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	u32 reg;
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(0x3 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+struct divider {
+	struct clk *clk;
+	void __iomem *reg;
+	u32 bp_pred;
+	u32 bm_pred;
+	u32 bp_podf;
+	u32 bm_podf;
+};
+
+#define DEF_CLK_DIV1(d, c, r, b)				\
+	static struct divider d = {				\
+		.clk = c,					\
+		.reg = r,					\
+		.bp_podf = BP_##r##_##b##_PODF,			\
+		.bm_podf = BM_##r##_##b##_PODF,			\
+	}
+
+DEF_CLK_DIV1(arm_div,		&arm_clk,		CACRR,	ARM);
+DEF_CLK_DIV1(ipg_div,		&ipg_clk,		CBCDR,	IPG);
+DEF_CLK_DIV1(ahb_div,		&ahb_clk,		CBCDR,	AHB);
+DEF_CLK_DIV1(axi_div,		&axi_clk,		CBCDR,	AXI);
+DEF_CLK_DIV1(mmdc_ch0_axi_div,	&mmdc_ch0_axi_clk,	CBCDR,	MMDC_CH0_AXI);
+DEF_CLK_DIV1(mmdc_ch1_axi_div,	&mmdc_ch1_axi_clk,	CBCDR,	MMDC_CH1_AXI);
+DEF_CLK_DIV1(periph_clk2_div,	&periph_clk2_clk,	CBCDR,	PERIPH_CLK2);
+DEF_CLK_DIV1(periph2_clk2_div,	&periph2_clk2_clk,	CBCDR,	PERIPH2_CLK2);
+DEF_CLK_DIV1(gpu2d_core_div,	&gpu2d_core_clk,	CBCMR,	GPU2D_CORE);
+DEF_CLK_DIV1(gpu3d_core_div,	&gpu3d_core_clk,	CBCMR,	GPU3D_CORE);
+DEF_CLK_DIV1(gpu3d_shader_div,	&gpu3d_shader_clk,	CBCMR,	GPU3D_SHADER);
+DEF_CLK_DIV1(ipg_perclk_div,	&ipg_perclk,		CSCMR1,	PERCLK);
+DEF_CLK_DIV1(emi_div,		&emi_clk,		CSCMR1,	EMI);
+DEF_CLK_DIV1(emi_slow_div,	&emi_slow_clk,		CSCMR1,	EMI_SLOW);
+DEF_CLK_DIV1(can_div,		&can1_clk,		CSCMR2,	CAN);
+DEF_CLK_DIV1(uart_div,		&uart_clk,		CSCDR1,	UART);
+DEF_CLK_DIV1(usdhc1_div,	&usdhc1_clk,		CSCDR1,	USDHC1);
+DEF_CLK_DIV1(usdhc2_div,	&usdhc2_clk,		CSCDR1,	USDHC2);
+DEF_CLK_DIV1(usdhc3_div,	&usdhc3_clk,		CSCDR1,	USDHC3);
+DEF_CLK_DIV1(usdhc4_div,	&usdhc4_clk,		CSCDR1,	USDHC4);
+DEF_CLK_DIV1(vpu_div,		&vpu_clk,		CSCDR1,	VPU_AXI);
+DEF_CLK_DIV1(hsi_tx_div,	&hsi_tx_clk,		CDCDR,	HSI_TX);
+DEF_CLK_DIV1(ipu1_di0_pre_div,	&ipu1_di0_pre_clk,	CHSCCDR, IPU1_DI0_PRE);
+DEF_CLK_DIV1(ipu1_di1_pre_div,	&ipu1_di1_pre_clk,	CHSCCDR, IPU1_DI1_PRE);
+DEF_CLK_DIV1(ipu2_di0_pre_div,	&ipu2_di0_pre_clk,	CSCDR2,	IPU2_DI0_PRE);
+DEF_CLK_DIV1(ipu2_di1_pre_div,	&ipu2_di1_pre_clk,	CSCDR2,	IPU2_DI1_PRE);
+DEF_CLK_DIV1(ipu1_div,		&ipu1_clk,		CSCDR3,	IPU1_HSP);
+DEF_CLK_DIV1(ipu2_div,		&ipu2_clk,		CSCDR3,	IPU2_HSP);
+
+#define DEF_CLK_DIV2(d, c, r, b)				\
+	static struct divider d = {				\
+		.clk = c,					\
+		.reg = r,					\
+		.bp_pred = BP_##r##_##b##_PRED,			\
+		.bm_pred = BM_##r##_##b##_PRED,			\
+		.bp_podf = BP_##r##_##b##_PODF,			\
+		.bm_podf = BM_##r##_##b##_PODF,			\
+	}
+
+DEF_CLK_DIV2(ssi1_div,		&ssi1_clk,		CS1CDR,	SSI1);
+DEF_CLK_DIV2(ssi3_div,		&ssi3_clk,		CS1CDR,	SSI3);
+DEF_CLK_DIV2(esai_div,		&esai_clk,		CS1CDR,	ESAI);
+DEF_CLK_DIV2(ssi2_div,		&ssi2_clk,		CS2CDR,	SSI2);
+DEF_CLK_DIV2(enfc_div,		&enfc_clk,		CS2CDR,	ENFC);
+DEF_CLK_DIV2(spdif_div,		&spdif_clk,		CDCDR,	SPDIF);
+DEF_CLK_DIV2(asrc_serial_div,	&asrc_serial_clk,	CDCDR,	ASRC_SERIAL);
+
+static struct divider *dividers[] = {
+	&arm_div,
+	&ipg_div,
+	&ahb_div,
+	&axi_div,
+	&mmdc_ch0_axi_div,
+	&mmdc_ch1_axi_div,
+	&periph_clk2_div,
+	&periph2_clk2_div,
+	&gpu2d_core_div,
+	&gpu3d_core_div,
+	&gpu3d_shader_div,
+	&ipg_perclk_div,
+	&emi_div,
+	&emi_slow_div,
+	&can_div,
+	&uart_div,
+	&usdhc1_div,
+	&usdhc2_div,
+	&usdhc3_div,
+	&usdhc4_div,
+	&vpu_div,
+	&hsi_tx_div,
+	&ipu1_di0_pre_div,
+	&ipu1_di1_pre_div,
+	&ipu2_di0_pre_div,
+	&ipu2_di1_pre_div,
+	&ipu1_div,
+	&ipu2_div,
+	&ssi1_div,
+	&ssi3_div,
+	&esai_div,
+	&ssi2_div,
+	&enfc_div,
+	&spdif_div,
+	&asrc_serial_div,
+};
+
+static unsigned long ldb_di_clk_get_rate(struct clk *clk)
+{
+	u32 val = __raw_readl(CSCMR2);
+
+	val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
+				       BM_CSCMR2_LDB_DI1_IPU_DIV;
+	if (val)
+		return clk_get_rate(clk->parent) / 7;
+	else
+		return clk_get_rate(clk->parent) * 2 / 7;
+}
+
+static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	u32 val = __raw_readl(CSCMR2);
+
+	if (rate * 7 <= parent_rate + parent_rate / 20)
+		val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
+	else
+		val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
+
+	__raw_writel(val, CSCMR2);
+
+	return 0;
+}
+
+static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+
+	if (rate * 7 <= parent_rate + parent_rate / 20)
+		return parent_rate / 7;
+	else
+		return 2 * parent_rate / 7;
+}
+
+static unsigned long _clk_get_rate(struct clk *clk)
+{
+	struct divider *d;
+	u32 val, pred, podf;
+	int i, num;
+
+	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+		return ldb_di_clk_get_rate(clk);
+
+	num = ARRAY_SIZE(dividers);
+	for (i = 0; i < num; i++)
+		if (dividers[i]->clk == clk) {
+			d = dividers[i];
+			break;
+		}
+	if (i == num)
+		return clk_get_rate(clk->parent);
+
+	val = __raw_readl(d->reg);
+	pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
+	podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
+
+	return clk_get_rate(clk->parent) / (pred * podf);
+}
+
+static int clk_busy_wait(struct clk *clk)
+{
+	int timeout = 0x100000;
+	u32 bm;
+
+	if (clk == &axi_clk)
+		bm = BM_CDHIPR_AXI_PODF_BUSY;
+	else if (clk == &ahb_clk)
+		bm = BM_CDHIPR_AHB_PODF_BUSY;
+	else if (clk == &mmdc_ch0_axi_clk)
+		bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
+	else if (clk == &periph_clk)
+		bm = BM_CDHIPR_PERIPH_SEL_BUSY;
+	else if (clk == &arm_clk)
+		bm = BM_CDHIPR_ARM_PODF_BUSY;
+	else
+		return -EINVAL;
+
+	while ((__raw_readl(CDHIPR) & bm) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		return -EBUSY;
+
+	return 0;
+}
+
+static int _clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	struct divider *d;
+	u32 val, div, max_div, pred = 0, podf;
+	int i, num;
+
+	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+		return ldb_di_clk_set_rate(clk, rate);
+
+	num = ARRAY_SIZE(dividers);
+	for (i = 0; i < num; i++)
+		if (dividers[i]->clk == clk) {
+			d = dividers[i];
+			break;
+		}
+	if (i == num)
+		return -EINVAL;
+
+	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
+		  ((d->bm_pred >> d->bp_pred) + 1);
+
+	div = parent_rate / rate;
+	if (div == 0)
+		div++;
+
+	if ((parent_rate / div != rate) || div > max_div)
+		return -EINVAL;
+
+	if (d->bm_pred) {
+		calc_pred_podf_dividers(div, &pred, &podf);
+	} else {
+		pred = 1;
+		podf = div;
+	}
+
+	val = __raw_readl(d->reg);
+	val &= ~(d->bm_pred | d->bm_podf);
+	val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
+	__raw_writel(val, d->reg);
+
+	if (clk == &axi_clk || clk == &ahb_clk ||
+	    clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
+		return clk_busy_wait(clk);
+
+	return 0;
+}
+
+static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	u32 div = parent_rate / rate;
+	u32 div_max, pred = 0, podf;
+	struct divider *d;
+	int i, num;
+
+	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+		return ldb_di_clk_round_rate(clk, rate);
+
+	num = ARRAY_SIZE(dividers);
+	for (i = 0; i < num; i++)
+		if (dividers[i]->clk == clk) {
+			d = dividers[i];
+			break;
+		}
+	if (i == num)
+		return -EINVAL;
+
+	if (div == 0 || parent_rate % rate)
+		div++;
+
+	if (d->bm_pred) {
+		calc_pred_podf_dividers(div, &pred, &podf);
+		div = pred * podf;
+	} else {
+		div_max = (d->bm_podf >> d->bp_podf) + 1;
+		if (div > div_max)
+			div = div_max;
+	}
+
+	return parent_rate / div;
+}
+
+struct multiplexer {
+	struct clk *clk;
+	void __iomem *reg;
+	u32 bp;
+	u32 bm;
+	int pnum;
+	struct clk *parents[];
+};
+
+static struct multiplexer axi_mux = {
+	.clk = &axi_clk,
+	.reg = CBCDR,
+	.bp = BP_CBCDR_AXI_SEL,
+	.bm = BM_CBCDR_AXI_SEL,
+	.parents = {
+		&periph_clk,
+		&pll2_pfd_400m,
+		&pll3_pfd_540m,
+		NULL
+	},
+};
+
+static struct multiplexer periph_mux = {
+	.clk = &periph_clk,
+	.reg = CBCDR,
+	.bp = BP_CBCDR_PERIPH_CLK_SEL,
+	.bm = BM_CBCDR_PERIPH_CLK_SEL,
+	.parents = {
+		&periph_pre_clk,
+		&periph_clk2_clk,
+		NULL
+	},
+};
+
+static struct multiplexer periph_pre_mux = {
+	.clk = &periph_pre_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
+	.bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
+	.parents = {
+		&pll2_bus,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		&pll2_200m,
+		NULL
+	},
+};
+
+static struct multiplexer periph_clk2_mux = {
+	.clk = &periph_clk2_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PERIPH_CLK2_SEL,
+	.bm = BM_CBCMR_PERIPH_CLK2_SEL,
+	.parents = {
+		&pll3_usb_otg,
+		&osc_clk,
+		NULL
+	},
+};
+
+static struct multiplexer periph2_mux = {
+	.clk = &periph2_clk,
+	.reg = CBCDR,
+	.bp = BP_CBCDR_PERIPH2_CLK_SEL,
+	.bm = BM_CBCDR_PERIPH2_CLK_SEL,
+	.parents = {
+		&periph2_pre_clk,
+		&periph2_clk2_clk,
+		NULL
+	},
+};
+
+static struct multiplexer periph2_pre_mux = {
+	.clk = &periph2_pre_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
+	.bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
+	.parents = {
+		&pll2_bus,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		&pll2_200m,
+		NULL
+	},
+};
+
+static struct multiplexer periph2_clk2_mux = {
+	.clk = &periph2_clk2_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PERIPH2_CLK2_SEL,
+	.bm = BM_CBCMR_PERIPH2_CLK2_SEL,
+	.parents = {
+		&pll3_usb_otg,
+		&osc_clk,
+		NULL
+	},
+};
+
+static struct multiplexer gpu2d_axi_mux = {
+	.clk = &gpu2d_axi_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU2D_AXI_SEL,
+	.bm = BM_CBCMR_GPU2D_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer gpu3d_axi_mux = {
+	.clk = &gpu3d_axi_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU3D_AXI_SEL,
+	.bm = BM_CBCMR_GPU3D_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer gpu3d_core_mux = {
+	.clk = &gpu3d_core_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU3D_CORE_SEL,
+	.bm = BM_CBCMR_GPU3D_CORE_SEL,
+	.parents = {
+		&mmdc_ch0_axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_594m,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+static struct multiplexer gpu3d_shader_mux = {
+	.clk = &gpu3d_shader_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU3D_SHADER_SEL,
+	.bm = BM_CBCMR_GPU3D_SHADER_SEL,
+	.parents = {
+		&mmdc_ch0_axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_594m,
+		&pll3_pfd_720m,
+		NULL
+	},
+};
+
+static struct multiplexer pcie_axi_mux = {
+	.clk = &pcie_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PCIE_AXI_SEL,
+	.bm = BM_CBCMR_PCIE_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer vdo_axi_mux = {
+	.clk = &vdo_axi_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_VDO_AXI_SEL,
+	.bm = BM_CBCMR_VDO_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer vpu_axi_mux = {
+	.clk = &vpu_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_VPU_AXI_SEL,
+	.bm = BM_CBCMR_VPU_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		NULL
+	},
+};
+
+static struct multiplexer gpu2d_core_mux = {
+	.clk = &gpu2d_core_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU2D_CORE_SEL,
+	.bm = BM_CBCMR_GPU2D_CORE_SEL,
+	.parents = {
+		&axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_352m,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+#define DEF_SSI_MUX(id)							\
+	static struct multiplexer ssi##id##_mux = {			\
+		.clk = &ssi##id##_clk,					\
+		.reg = CSCMR1,						\
+		.bp = BP_CSCMR1_SSI##id##_SEL,				\
+		.bm = BM_CSCMR1_SSI##id##_SEL,				\
+		.parents = {						\
+			&pll3_pfd_508m,					\
+			&pll3_pfd_454m,					\
+			&pll4_audio,					\
+			NULL						\
+		},							\
+	}
+
+DEF_SSI_MUX(1);
+DEF_SSI_MUX(2);
+DEF_SSI_MUX(3);
+
+#define DEF_USDHC_MUX(id)						\
+	static struct multiplexer usdhc##id##_mux = {			\
+		.clk = &usdhc##id##_clk,				\
+		.reg = CSCMR1,						\
+		.bp = BP_CSCMR1_USDHC##id##_SEL,			\
+		.bm = BM_CSCMR1_USDHC##id##_SEL,			\
+		.parents = {						\
+			&pll2_pfd_400m,					\
+			&pll2_pfd_352m,					\
+			NULL						\
+		},							\
+	}
+
+DEF_USDHC_MUX(1);
+DEF_USDHC_MUX(2);
+DEF_USDHC_MUX(3);
+DEF_USDHC_MUX(4);
+
+static struct multiplexer emi_mux = {
+	.clk = &emi_clk,
+	.reg = CSCMR1,
+	.bp = BP_CSCMR1_EMI_SEL,
+	.bm = BM_CSCMR1_EMI_SEL,
+	.parents = {
+		&axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		NULL
+	},
+};
+
+static struct multiplexer emi_slow_mux = {
+	.clk = &emi_slow_clk,
+	.reg = CSCMR1,
+	.bp = BP_CSCMR1_EMI_SLOW_SEL,
+	.bm = BM_CSCMR1_EMI_SLOW_SEL,
+	.parents = {
+		&axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		NULL
+	},
+};
+
+static struct multiplexer esai_mux = {
+	.clk = &esai_clk,
+	.reg = CSCMR2,
+	.bp = BP_CSCMR2_ESAI_SEL,
+	.bm = BM_CSCMR2_ESAI_SEL,
+	.parents = {
+		&pll4_audio,
+		&pll3_pfd_508m,
+		&pll3_pfd_454m,
+		&pll3_usb_otg,
+		NULL
+	},
+};
+
+#define DEF_LDB_DI_MUX(id)						\
+	static struct multiplexer ldb_di##id##_mux = {			\
+		.clk = &ldb_di##id##_clk,				\
+		.reg = CS2CDR,						\
+		.bp = BP_CS2CDR_LDB_DI##id##_SEL,			\
+		.bm = BM_CS2CDR_LDB_DI##id##_SEL,			\
+		.parents = {						\
+			&pll5_video,					\
+			&pll2_pfd_352m,					\
+			&pll2_pfd_400m,					\
+			&pll3_pfd_540m,					\
+			&pll3_usb_otg,					\
+			NULL						\
+		},							\
+	}
+
+DEF_LDB_DI_MUX(0);
+DEF_LDB_DI_MUX(1);
+
+static struct multiplexer enfc_mux = {
+	.clk = &enfc_clk,
+	.reg = CS2CDR,
+	.bp = BP_CS2CDR_ENFC_SEL,
+	.bm = BM_CS2CDR_ENFC_SEL,
+	.parents = {
+		&pll2_pfd_352m,
+		&pll2_bus,
+		&pll3_usb_otg,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+static struct multiplexer spdif_mux = {
+	.clk = &spdif_clk,
+	.reg = CDCDR,
+	.bp = BP_CDCDR_SPDIF_SEL,
+	.bm = BM_CDCDR_SPDIF_SEL,
+	.parents = {
+		&pll4_audio,
+		&pll3_pfd_508m,
+		&pll3_pfd_454m,
+		&pll3_usb_otg,
+		NULL
+	},
+};
+
+static struct multiplexer asrc_serial_mux = {
+	.clk = &asrc_serial_clk,
+	.reg = CDCDR,
+	.bp = BP_CDCDR_ASRC_SERIAL_SEL,
+	.bm = BM_CDCDR_ASRC_SERIAL_SEL,
+	.parents = {
+		&pll4_audio,
+		&pll3_pfd_508m,
+		&pll3_pfd_454m,
+		&pll3_usb_otg,
+		NULL
+	},
+};
+
+static struct multiplexer hsi_tx_mux = {
+	.clk = &hsi_tx_clk,
+	.reg = CDCDR,
+	.bp = BP_CDCDR_HSI_TX_SEL,
+	.bm = BM_CDCDR_HSI_TX_SEL,
+	.parents = {
+		&pll3_120m,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+#define DEF_IPU_DI_PRE_MUX(r, i, d)					\
+	static struct multiplexer ipu##i##_di##d##_pre_mux = {		\
+		.clk = &ipu##i##_di##d##_pre_clk,			\
+		.reg = r,						\
+		.bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL,		\
+		.bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL,		\
+		.parents = {						\
+			&mmdc_ch0_axi_clk,				\
+			&pll3_usb_otg,					\
+			&pll5_video,					\
+			&pll2_pfd_352m,					\
+			&pll2_pfd_400m,					\
+			&pll3_pfd_540m,					\
+			NULL						\
+		},							\
+	}
+
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_DI_MUX(r, i, d)						\
+	static struct multiplexer ipu##i##_di##d##_mux = {		\
+		.clk = &ipu##i##_di##d##_clk,				\
+		.reg = r,						\
+		.bp = BP_##r##_IPU##i##_DI##d##_SEL,			\
+		.bm = BM_##r##_IPU##i##_DI##d##_SEL,			\
+		.parents = {						\
+			&ipu##i##_di##d##_pre_clk,			\
+			&dummy_clk,					\
+			&dummy_clk,					\
+			&ldb_di0_clk,					\
+			&ldb_di1_clk,					\
+			NULL						\
+		},							\
+	}
+
+DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_MUX(id)							\
+	static struct multiplexer ipu##id##_mux = {			\
+		.clk = &ipu##id##_clk,					\
+		.reg = CSCDR3,						\
+		.bp = BP_CSCDR3_IPU##id##_HSP_SEL,			\
+		.bm = BM_CSCDR3_IPU##id##_HSP_SEL,			\
+		.parents = {						\
+			&mmdc_ch0_axi_clk,				\
+			&pll2_pfd_400m,					\
+			&pll3_120m,					\
+			&pll3_pfd_540m,					\
+			NULL						\
+		},							\
+	}
+
+DEF_IPU_MUX(1);
+DEF_IPU_MUX(2);
+
+static struct multiplexer *multiplexers[] = {
+	&axi_mux,
+	&periph_mux,
+	&periph_pre_mux,
+	&periph_clk2_mux,
+	&periph2_mux,
+	&periph2_pre_mux,
+	&periph2_clk2_mux,
+	&gpu2d_axi_mux,
+	&gpu3d_axi_mux,
+	&gpu3d_core_mux,
+	&gpu3d_shader_mux,
+	&pcie_axi_mux,
+	&vdo_axi_mux,
+	&vpu_axi_mux,
+	&gpu2d_core_mux,
+	&ssi1_mux,
+	&ssi2_mux,
+	&ssi3_mux,
+	&usdhc1_mux,
+	&usdhc2_mux,
+	&usdhc3_mux,
+	&usdhc4_mux,
+	&emi_mux,
+	&emi_slow_mux,
+	&esai_mux,
+	&ldb_di0_mux,
+	&ldb_di1_mux,
+	&enfc_mux,
+	&spdif_mux,
+	&asrc_serial_mux,
+	&hsi_tx_mux,
+	&ipu1_di0_pre_mux,
+	&ipu1_di0_mux,
+	&ipu1_di1_pre_mux,
+	&ipu1_di1_mux,
+	&ipu2_di0_pre_mux,
+	&ipu2_di0_mux,
+	&ipu2_di1_pre_mux,
+	&ipu2_di1_mux,
+	&ipu1_mux,
+	&ipu2_mux,
+};
+
+static int _clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	struct multiplexer *m;
+	int i, num;
+	u32 val;
+
+	num = ARRAY_SIZE(multiplexers);
+	for (i = 0; i < num; i++)
+		if (multiplexers[i]->clk == clk) {
+			m = multiplexers[i];
+			break;
+		}
+	if (i == num)
+		return -EINVAL;
+
+	i = 0;
+	while (m->parents[i]) {
+		if (parent == m->parents[i])
+			break;
+		i++;
+	}
+	if (!m->parents[i])
+		return -EINVAL;
+
+	val = __raw_readl(m->reg);
+	val &= ~m->bm;
+	val |= i << m->bp;
+	__raw_writel(val, m->reg);
+
+	if (clk == &periph_clk)
+		return clk_busy_wait(clk);
+
+	return 0;
+}
+
+#define DEF_NG_CLK(name, p)				\
+	static struct clk name = {			\
+		.get_rate	= _clk_get_rate,	\
+		.set_rate	= _clk_set_rate,	\
+		.round_rate	= _clk_round_rate,	\
+		.set_parent	= _clk_set_parent,	\
+		.parent		= p,			\
+	}
+
+DEF_NG_CLK(periph_clk2_clk,	&osc_clk);
+DEF_NG_CLK(periph_pre_clk,	&pll2_bus);
+DEF_NG_CLK(periph_clk,		&periph_pre_clk);
+DEF_NG_CLK(periph2_clk2_clk,	&osc_clk);
+DEF_NG_CLK(periph2_pre_clk,	&pll2_bus);
+DEF_NG_CLK(periph2_clk,		&periph2_pre_clk);
+DEF_NG_CLK(axi_clk,		&periph_clk);
+DEF_NG_CLK(emi_clk,		&axi_clk);
+DEF_NG_CLK(arm_clk,		&pll1_sw_clk);
+DEF_NG_CLK(ahb_clk,		&periph_clk);
+DEF_NG_CLK(ipg_clk,		&ahb_clk);
+DEF_NG_CLK(ipg_perclk,		&ipg_clk);
+DEF_NG_CLK(ipu1_di0_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(ipu1_di1_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di0_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di1_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(asrc_serial_clk,	&pll3_usb_otg);
+
+#define DEF_CLK(name, er, es, p, s)			\
+	static struct clk name = {			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.enable		= _clk_enable,		\
+		.disable	= _clk_disable,		\
+		.get_rate	= _clk_get_rate,	\
+		.set_rate	= _clk_set_rate,	\
+		.round_rate	= _clk_round_rate,	\
+		.set_parent	= _clk_set_parent,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
+DEF_CLK(aips_tz1_clk,	  CCGR0, CG0,  &ahb_clk,	  NULL);
+DEF_CLK(aips_tz2_clk,	  CCGR0, CG1,  &ahb_clk,	  NULL);
+DEF_CLK(apbh_dma_clk,	  CCGR0, CG2,  &ahb_clk,	  NULL);
+DEF_CLK(asrc_clk,	  CCGR0, CG3,  &pll4_audio,	  NULL);
+DEF_CLK(can1_serial_clk,  CCGR0, CG8,  &pll3_usb_otg,	  NULL);
+DEF_CLK(can1_clk,	  CCGR0, CG7,  &pll3_usb_otg,	  &can1_serial_clk);
+DEF_CLK(can2_serial_clk,  CCGR0, CG10, &pll3_usb_otg,	  NULL);
+DEF_CLK(can2_clk,	  CCGR0, CG9,  &pll3_usb_otg,	  &can2_serial_clk);
+DEF_CLK(ecspi1_clk,	  CCGR1, CG0,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi2_clk,	  CCGR1, CG1,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi3_clk,	  CCGR1, CG2,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi4_clk,	  CCGR1, CG3,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi5_clk,	  CCGR1, CG4,  &pll3_60m,	  NULL);
+DEF_CLK(enet_clk,	  CCGR1, CG5,  &pll8_enet,	  NULL);
+DEF_CLK(esai_clk,	  CCGR1, CG8,  &pll3_usb_otg,	  NULL);
+DEF_CLK(gpt_serial_clk,	  CCGR1, CG11, &ipg_perclk,	  NULL);
+DEF_CLK(gpt_clk,	  CCGR1, CG10, &ipg_perclk,	  &gpt_serial_clk);
+DEF_CLK(gpu2d_core_clk,	  CCGR1, CG12, &pll2_pfd_352m,	  &gpu2d_axi_clk);
+DEF_CLK(gpu3d_core_clk,	  CCGR1, CG13, &pll2_pfd_594m,	  &gpu3d_axi_clk);
+DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m,	  &gpu3d_axi_clk);
+DEF_CLK(hdmi_iahb_clk,	  CCGR2, CG0,  &ahb_clk,	  NULL);
+DEF_CLK(hdmi_isfr_clk,	  CCGR2, CG2,  &pll3_pfd_540m,	  &hdmi_iahb_clk);
+DEF_CLK(i2c1_clk,	  CCGR2, CG3,  &ipg_perclk,	  NULL);
+DEF_CLK(i2c2_clk,	  CCGR2, CG4,  &ipg_perclk,	  NULL);
+DEF_CLK(i2c3_clk,	  CCGR2, CG5,  &ipg_perclk,	  NULL);
+DEF_CLK(iim_clk,	  CCGR2, CG6,  &ipg_clk,	  NULL);
+DEF_CLK(enfc_clk,	  CCGR2, CG7,  &pll2_pfd_352m,	  NULL);
+DEF_CLK(ipu1_clk,	  CCGR3, CG0,  &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu1_di0_clk,	  CCGR3, CG1,  &ipu1_di0_pre_clk, NULL);
+DEF_CLK(ipu1_di1_clk,	  CCGR3, CG2,  &ipu1_di1_pre_clk, NULL);
+DEF_CLK(ipu2_clk,	  CCGR3, CG3,  &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu2_di0_clk,	  CCGR3, CG4,  &ipu2_di0_pre_clk, NULL);
+DEF_CLK(ipu2_di1_clk,	  CCGR3, CG5,  &ipu2_di1_pre_clk, NULL);
+DEF_CLK(ldb_di0_clk,	  CCGR3, CG6,  &pll3_pfd_540m,	  NULL);
+DEF_CLK(ldb_di1_clk,	  CCGR3, CG7,  &pll3_pfd_540m,	  NULL);
+DEF_CLK(hsi_tx_clk,	  CCGR3, CG8,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(mlb_clk,	  CCGR3, CG9,  &pll6_mlb,	  NULL);
+DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk,	  NULL);
+DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk,	  &mmdc_ch0_ipg_clk);
+DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk,	  NULL);
+DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk,	  &mmdc_ch1_ipg_clk);
+DEF_CLK(openvg_axi_clk,   CCGR3, CG13, &axi_clk,	  NULL);
+DEF_CLK(pwm1_clk,	  CCGR4, CG8,  &ipg_perclk,	  NULL);
+DEF_CLK(pwm2_clk,	  CCGR4, CG9,  &ipg_perclk,	  NULL);
+DEF_CLK(pwm3_clk,	  CCGR4, CG10, &ipg_perclk,	  NULL);
+DEF_CLK(pwm4_clk,	  CCGR4, CG11, &ipg_perclk,	  NULL);
+DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk,	  NULL);
+DEF_CLK(gpmi_bch_clk,	  CCGR4, CG13, &usdhc4_clk,	  &gpmi_bch_apb_clk);
+DEF_CLK(gpmi_apb_clk,	  CCGR4, CG15, &usdhc3_clk,	  &gpmi_bch_clk);
+DEF_CLK(gpmi_io_clk,	  CCGR4, CG14, &enfc_clk,	  &gpmi_apb_clk);
+DEF_CLK(sdma_clk,	  CCGR5, CG3,  &ahb_clk,	  NULL);
+DEF_CLK(spba_clk,	  CCGR5, CG6,  &ipg_clk,	  NULL);
+DEF_CLK(spdif_clk,	  CCGR5, CG7,  &pll3_usb_otg,	  &spba_clk);
+DEF_CLK(ssi1_clk,	  CCGR5, CG9,  &pll3_pfd_508m,	  NULL);
+DEF_CLK(ssi2_clk,	  CCGR5, CG10, &pll3_pfd_508m,	  NULL);
+DEF_CLK(ssi3_clk,	  CCGR5, CG11, &pll3_pfd_508m,	  NULL);
+DEF_CLK(uart_serial_clk,  CCGR5, CG13, &pll3_usb_otg,	  NULL);
+DEF_CLK(uart_clk,	  CCGR5, CG12, &pll3_80m,	  &uart_serial_clk);
+DEF_CLK(usboh3_clk,	  CCGR6, CG0,  &ipg_clk,	  NULL);
+DEF_CLK(usdhc1_clk,	  CCGR6, CG1,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(usdhc2_clk,	  CCGR6, CG2,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(usdhc3_clk,	  CCGR6, CG3,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(usdhc4_clk,	  CCGR6, CG4,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(emi_slow_clk,	  CCGR6, CG5,  &axi_clk,	  NULL);
+DEF_CLK(vdo_axi_clk,	  CCGR6, CG6,  &axi_clk,	  NULL);
+DEF_CLK(vpu_clk,	  CCGR6, CG7,  &axi_clk,	  NULL);
+
+static int pcie_clk_enable(struct clk *clk)
+{
+	u32 val;
+
+	val = __raw_readl(PLL8_ENET);
+	val |= BM_PLL_ENET_EN_PCIE;
+	__raw_writel(val, PLL8_ENET);
+
+	return _clk_enable(clk);
+}
+
+static void pcie_clk_disable(struct clk *clk)
+{
+	u32 val;
+
+	_clk_disable(clk);
+
+	val = __raw_readl(PLL8_ENET);
+	val &= BM_PLL_ENET_EN_PCIE;
+	__raw_writel(val, PLL8_ENET);
+}
+
+static struct clk pcie_clk = {
+	.enable_reg = CCGR4,
+	.enable_shift = CG0,
+	.enable = pcie_clk_enable,
+	.disable = pcie_clk_disable,
+	.set_parent = _clk_set_parent,
+	.parent = &axi_clk,
+	.secondary = &pll8_enet,
+};
+
+static int sata_clk_enable(struct clk *clk)
+{
+	u32 val;
+
+	val = __raw_readl(PLL8_ENET);
+	val |= BM_PLL_ENET_EN_SATA;
+	__raw_writel(val, PLL8_ENET);
+
+	return _clk_enable(clk);
+}
+
+static void sata_clk_disable(struct clk *clk)
+{
+	u32 val;
+
+	_clk_disable(clk);
+
+	val = __raw_readl(PLL8_ENET);
+	val &= BM_PLL_ENET_EN_SATA;
+	__raw_writel(val, PLL8_ENET);
+}
+
+static struct clk sata_clk = {
+	.enable_reg = CCGR5,
+	.enable_shift = CG2,
+	.enable = sata_clk_enable,
+	.disable = sata_clk_disable,
+	.parent = &ipg_clk,
+	.secondary = &pll8_enet,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	}
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
+	_REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
+	_REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
+	_REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
+	_REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
+	_REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
+	_REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
+	_REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
+	_REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
+	_REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
+	_REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
+	_REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk),
+	_REGISTER_CLOCK(NULL, "ckih2_clk", ckih2_clk),
+	_REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
+	_REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
+	_REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
+	_REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
+	_REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
+	_REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
+	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
+	_REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
+	_REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
+	_REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
+	_REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
+	_REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
+	_REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
+	_REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
+	_REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
+	_REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+};
+
+static void __init imx6q_ccm_low_power_init(void)
+{
+	u32 val;
+
+	/* only keep necessary clocks on */
+	__raw_writel(0x3 << CG0  | 0x3 << CG1  | 0x3 << CG2,	CCGR0);
+	__raw_writel(0x3 << CG8  | 0x3 << CG9  | 0x3 << CG10,	CCGR2);
+	__raw_writel(0x3 << CG10 | 0x3 << CG12,			CCGR3);
+	__raw_writel(0x3 << CG4  | 0x3 << CG6  | 0x3 << CG7,	CCGR4);
+	__raw_writel(0x3 << CG0,				CCGR5);
+	__raw_writel(0,						CCGR6);
+	__raw_writel(0,						CCGR7);
+
+	clk_enable(&uart_clk);
+	clk_enable(&mmdc_ch0_axi_clk);
+
+	/* setup for STOP mode */
+	val = __raw_readl(CLPCR);
+	val &= ~(BM_CLPCR_LPM | BM_CLPCR_STBY_COUNT);
+	val |= 0x2 << BP_CLPCR_LPM | 0x3 << BP_CLPCR_STBY_COUNT;
+	val |= BM_CLPCR_VSTBY;
+	val |= BM_CLPCR_SBYOS;
+	val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+	__raw_writel(val, CLPCR);
+}
+
+static struct map_desc imx6q_clock_desc[] = {
+	{
+		.virtual	= MX6Q_CCM_BASE_VADDR,
+		.pfn		= __phys_to_pfn(MX6Q_CCM_BASE_ADDR),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MX6Q_ANATOP_BASE_VADDR,
+		.pfn		= __phys_to_pfn(MX6Q_ANATOP_BASE_ADDR),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+int __init mx6q_clocks_init(unsigned long ckil, unsigned long osc,
+			    unsigned long ckih1, unsigned long ckih2)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int i, irq;
+
+	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+
+	external_low_reference = ckil;
+	external_high_reference = ckih1;
+	ckih2_reference = ckih2;
+	oscillator_reference = osc;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	imx6q_ccm_low_power_init();
+
+	clk_set_rate(&pll4_audio, FREQ_650M);
+	clk_set_rate(&pll5_video, FREQ_650M);
+	clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
+	clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
+	clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
+	clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
+	clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
+	clk_set_rate(&gpu3d_core_clk, FREQ_528M);
+	clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
+	clk_set_rate(&asrc_serial_clk, 1500000);
+	clk_set_rate(&enfc_clk, 11000000);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(&gpt_clk, base, irq);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
new file mode 100644
index 0000000..acf0ef7
--- /dev/null
+++ b/arch/arm/mach-imx/gpc.c
@@ -0,0 +1,110 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1		0x008
+#define GPC_PGC_CPU_PDN		0x2a0
+
+#define IMR_NUM			4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = __raw_readl(reg_imr1 + i * 4);
+		__raw_writel(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+	}
+
+	/* Tell GPC to power off ARM core when suspend */
+	__raw_writel(0x1, gpc_base + GPC_PGC_CPU_PDN);
+}
+
+void imx_gpc_post_resume(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++)
+		__raw_writel(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	unsigned int idx = d->irq / 32 - 1;
+	u32 mask;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return -EINVAL;
+
+	mask = 1 << d->irq % 32;
+	gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+				  gpc_wake_irqs[idx] & ~mask;
+
+	return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = __raw_readl(reg);
+	val &= ~(1 << d->irq % 32);
+	__raw_writel(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = __raw_readl(reg);
+	val |= 1 << (d->irq % 32);
+	__raw_writel(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+	gpc_base = of_iomap(np, 0);
+	WARN_ON(!gpc_base);
+
+	/* Register GPC as the secondary interrupt controller behind GIC */
+	gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+	gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+	gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
new file mode 100644
index 0000000..8d6b540
--- /dev/null
+++ b/arch/arm/mach-imx/mmdc.c
@@ -0,0 +1,71 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#define MMDC_MAPSR		0x404
+#define BP_MMDC_MAPSR_PSD	0
+#define BP_MMDC_MAPSR_PSS	4
+
+static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *mmdc_base, *reg;
+	u32 val;
+	int timeout = 0x400;
+
+	mmdc_base = of_iomap(np, 0);
+	WARN_ON(!mmdc_base);
+
+	reg = mmdc_base + MMDC_MAPSR;
+
+	/* Enable automatic power saving */
+	val = readl(reg);
+	val &= ~(1 << BP_MMDC_MAPSR_PSD);
+	writel(val, reg);
+
+	/* Ensure it's successfully enabled */
+	while (!(readl(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout)) {
+		pr_warn("%s: failed to enable automatic power saving\n",
+			__func__);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static struct of_device_id imx_mmdc_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-mmdc", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver imx_mmdc_driver = {
+	.driver		= {
+		.name	= "imx-mmdc",
+		.owner	= THIS_MODULE,
+		.of_match_table = imx_mmdc_dt_ids,
+	},
+	.probe		= imx_mmdc_probe,
+};
+
+static int __init imx_mmdc_init(void)
+{
+	return platform_driver_register(&imx_mmdc_driver);
+}
+postcore_initcall(imx_mmdc_init);
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
new file mode 100644
index 0000000..95fdd65
--- /dev/null
+++ b/arch/arm/mach-imx/src.c
@@ -0,0 +1,52 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/unified.h>
+
+#define SRC_SCR				0x000
+#define SRC_GPR1			0x020
+#define BP_SRC_SCR_CORE1_RST		14
+#define BP_SRC_SCR_CORE1_ENABLE		22
+
+static void __iomem *src_base;
+
+void imx_enable_cpu(int cpu, bool enable)
+{
+	u32 mask, val;
+
+	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+	val = __raw_readl(src_base + SRC_SCR);
+	val = enable ? val | mask : val & ~mask;
+	__raw_writel(val, src_base + SRC_SCR);
+}
+
+void imx_set_cpu_jump(int cpu, void *jump_addr)
+{
+	__raw_writel(BSYM(virt_to_phys(jump_addr)),
+		     src_base + SRC_GPR1 + cpu * 8);
+}
+
+static int __init imx_src_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+	src_base = of_iomap(np, 0);
+	WARN_ON(!src_base);
+
+	return 0;
+}
+early_initcall(imx_src_init);