| Message ID | 1315453426-8796-1-git-send-email-kengyu@canonical.com |
|---|---|
| State | Not Applicable |
| Delegated to: | David Miller |
| Headers | show |
On Thu, 8 Sep 2011 11:43:46 +0800 Keng-Yu Lin <kengyu@canonical.com> wrote: > ASM1061 PCI-E to SATA bridge controller has two variants. > One works under AHCI and the other works with ata_generic. ata_generic should be an absolute last resort - it doesn't support error recovery by speed dropping, mode setting, hotplug, timing tuning etc. Is there any documentation on the device or does it appear to follow the usual mode setting behaviours ? The web page merely says "Bus Master Programming Interface to IDE ATA Controller Rev. 1.0" which covers only the basic transfers and not timing (ie ata_generic) as you say but there are a few ways to find out more about how it works - dump the PCI space in IDE mode and see if it looks like d1510r1 - some controllers are pretty unimaginative and so follow follow Appendix B of this document. - see if it will run with the pata_acpi driver (ie it has _GTM and similar methods in the BIOS). If it does then this is preferable as it can do limited mode handling and you can also see what the ACPI code itself actually does for _GTM/_STM. - See if Asmedia will provide documentation. I don't see anything useful on the English web site but perhaps someone has as Asmedia contact ? The AHCI one looks good - AHCI standardises all this stuff so the AHCI one can just be a device id. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 08-09-2011 7:43, Keng-Yu Lin wrote: > ASM1061 PCI-E to SATA bridge controller has two variants. > One works under AHCI and the other works with ata_generic. > Add the PCI vendor ID and product IDs accordingly. > Signed-off-by: Keng-Yu Lin<kengyu@canonical.com> [...] > diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h > index f8910e1..87182b8 100644 > --- a/include/linux/pci_ids.h > +++ b/include/linux/pci_ids.h > @@ -2844,3 +2844,7 @@ > > #define PCI_VENDOR_ID_XEN 0x5853 > #define PCI_DEVICE_ID_XEN_PLATFORM 0x0001 > + > +#define PCI_VENDOR_ID_ASMEDIA 0x1b21 > +#define PCI_DEVICE_ID_ASM1061_IDE 0x0611 > +#define PCI_DEVICE_ID_ASM1061_AHCI 0x0612 Adding new device IDs to that file is frowned upon. Define the device ID locally in the driver file, if you must. You don't even use the second one. WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 71afe03..4899aad 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -397,6 +397,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* Promise */ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Asmedia */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 721d38b..8187503 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -220,6 +220,7 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, + { PCI_DEVICE(PCI_VENDOR_ID_ASMEDIA,PCI_DEVICE_ID_ASM1061_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), .driver_data = ATA_GEN_FORCE_DMA }, /* diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f8910e1..87182b8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2844,3 +2844,7 @@ #define PCI_VENDOR_ID_XEN 0x5853 #define PCI_DEVICE_ID_XEN_PLATFORM 0x0001 + +#define PCI_VENDOR_ID_ASMEDIA 0x1b21 +#define PCI_DEVICE_ID_ASM1061_IDE 0x0611 +#define PCI_DEVICE_ID_ASM1061_AHCI 0x0612
ASM1061 PCI-E to SATA bridge controller has two variants. One works under AHCI and the other works with ata_generic. Add the PCI vendor ID and product IDs accordingly. Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> --- drivers/ata/ahci.c | 3 +++ drivers/ata/ata_generic.c | 1 + include/linux/pci_ids.h | 4 ++++ 3 files changed, 8 insertions(+), 0 deletions(-)