diff mbox series

[v7,1/4] pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0

Message ID 20210114191601.v7.1.I3ad184e3423d8e479bc3e86f5b393abb1704a1d1@changeid
State New
Headers show
Series [v7,1/4] pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0 | expand

Commit Message

Doug Anderson Jan. 15, 2021, 3:16 a.m. UTC 
There's currently a comment in the code saying function 0 is GPIO.
Instead of hardcoding it, let's add a member where an SoC can specify
it.  No known SoCs use a number other than 0, but this just makes the
code clearer.  NOTE: no SoC code needs to be updated since we can rely
on zero-initialization.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

(no changes since v6)

Changes in v6:
- Don't wrap line; bust through 80 columns!

 drivers/pinctrl/qcom/pinctrl-msm.c | 3 +--
 drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++
 2 files changed, 3 insertions(+), 2 deletions(-)

Comments

Linus Walleij Jan. 18, 2021, 3:07 p.m. UTC | #1 
On Fri, Jan 15, 2021 at 4:16 AM Douglas Anderson <dianders@chromium.org> wrote:

> There's currently a comment in the code saying function 0 is GPIO.
> Instead of hardcoding it, let's add a member where an SoC can specify
> it.  No known SoCs use a number other than 0, but this just makes the
> code clearer.  NOTE: no SoC code needs to be updated since we can rely
> on zero-initialization.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
> Tested-by: Maulik Shah <mkshah@codeaurora.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Patches applied for fixes!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index e051aecf95c4..d1261188fb6e 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -210,8 +210,7 @@  static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
 	if (!g->nfuncs)
 		return 0;
 
-	/* For now assume function 0 is GPIO because it always is */
-	return msm_pinmux_set_mux(pctldev, g->funcs[0], offset);
+	return msm_pinmux_set_mux(pctldev, g->funcs[pctrl->soc->gpio_func], offset);
 }
 
 static const struct pinmux_ops msm_pinmux_ops = {
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index 333f99243c43..e31a5167c91e 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -118,6 +118,7 @@  struct msm_gpio_wakeirq_map {
  * @wakeirq_dual_edge_errata: If true then GPIOs using the wakeirq_map need
  *                            to be aware that their parent can't handle dual
  *                            edge interrupts.
+ * @gpio_func: Which function number is GPIO (usually 0).
  */
 struct msm_pinctrl_soc_data {
 	const struct pinctrl_pin_desc *pins;
@@ -134,6 +135,7 @@  struct msm_pinctrl_soc_data {
 	const struct msm_gpio_wakeirq_map *wakeirq_map;
 	unsigned int nwakeirq_map;
 	bool wakeirq_dual_edge_errata;
+	unsigned int gpio_func;
 };
 
 extern const struct dev_pm_ops msm_pinctrl_dev_pm_ops;