mbox series

[0/3] usb: am654: Add support for host mode to the USB port on overlay board

Message ID 20201120154855.9065-1-a-govindraju@ti.com
Headers show
Series usb: am654: Add support for host mode to the USB port on overlay board | expand

Message

Aswath Govindraju Nov. 20, 2020, 3:48 p.m. UTC 
The following series of patches
 - adds support for host mode to USB3SS0 controller
 - adds aliases for USB subsystems
 - adds a workaround to use USB0 in USB 2.0 only mode

Aswath Govindraju (3):
  board: ti: am65x: Set SERDES0 mux to PCIe to use USB 2.0 interface
  dts: am654-base-board-uboot: Set USB0 dr_mode to host
  dts: am654-base-board-uboot: Add aliases for USB subsystems

 arch/arm/dts/k3-am654-base-board-u-boot.dtsi |  4 +++-
 board/ti/am65x/evm.c                         | 16 ++++++++++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)

Comments

Roger Quadros Nov. 23, 2020, 8:26 a.m. UTC | #1 
Hi,

On 20/11/2020 17:48, Aswath Govindraju wrote:
> The following series of patches
>   - adds support for host mode to USB3SS0 controller
>   - adds aliases for USB subsystems
>   - adds a workaround to use USB0 in USB 2.0 only mode
> 
> Aswath Govindraju (3):
>    board: ti: am65x: Set SERDES0 mux to PCIe to use USB 2.0 interface
>    dts: am654-base-board-uboot: Set USB0 dr_mode to host
>    dts: am654-base-board-uboot: Add aliases for USB subsystems

For all patches,

Acked-by: Roger Quadros <rogerq@ti.com>

> 
>   arch/arm/dts/k3-am654-base-board-u-boot.dtsi |  4 +++-
>   board/ti/am65x/evm.c                         | 16 ++++++++++++++++
>   2 files changed, 19 insertions(+), 1 deletion(-)
> 

cheers,
-roger
Lokesh Vutla Dec. 23, 2020, 8:13 a.m. UTC | #2 
On 20/11/20 9:18 pm, Aswath Govindraju wrote:
> The following series of patches
>  - adds support for host mode to USB3SS0 controller
>  - adds aliases for USB subsystems
>  - adds a workaround to use USB0 in USB 2.0 only mode

Fixed the dts patches subject to arm: dts: .... and
applied to u-boot-ti for-next branch.

Thanks and regards,
Lokesh

> 
> Aswath Govindraju (3):
>   board: ti: am65x: Set SERDES0 mux to PCIe to use USB 2.0 interface
>   dts: am654-base-board-uboot: Set USB0 dr_mode to host
>   dts: am654-base-board-uboot: Add aliases for USB subsystems
> 
>  arch/arm/dts/k3-am654-base-board-u-boot.dtsi |  4 +++-
>  board/ti/am65x/evm.c                         | 16 ++++++++++++++++
>  2 files changed, 19 insertions(+), 1 deletion(-)
>