| Message ID | 1602833711-19132-1-git-send-email-weijie.gao@mediatek.com |
|---|---|
| State | Superseded |
| Delegated to: | Daniel Schwierzeck |
| Headers | show |
| Series | [01/18] mips: dts: switch to board defines for dtb for mtmips | expand |
On 16.10.20 09:35, Weijie Gao wrote: > Previous the dts files for gardena-smart-gateway-mt7688 and > linkit-smart-7688 are set to be built when mtmips is selected. > > This can lead to a compilation error if another soc is added to this arch > with different dtsi files. > > So it's better to build the dtb only if their board is selected. > > Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Stefan Roese <sr@denx.de> Thanks, Stefan > --- > arch/mips/dts/Makefile | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile > index dc85901dca..e82f96d4e4 100644 > --- a/arch/mips/dts/Makefile > +++ b/arch/mips/dts/Makefile > @@ -1,8 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0+ > > -dtb-$(CONFIG_ARCH_MTMIPS) += \ > - gardena-smart-gateway-mt7688.dtb \ > - linkit-smart-7688.dtb > dtb-$(CONFIG_TARGET_AP121) += ap121.dtb > dtb-$(CONFIG_TARGET_AP143) += ap143.dtb > dtb-$(CONFIG_TARGET_AP152) += ap152.dtb > @@ -18,6 +15,8 @@ dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb > dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb > dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb > dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb > +dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb > +dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb > dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb > dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb > dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb > Viele Grüße, Stefan
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index dc85901dca..e82f96d4e4 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -1,8 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+ -dtb-$(CONFIG_ARCH_MTMIPS) += \ - gardena-smart-gateway-mt7688.dtb \ - linkit-smart-7688.dtb dtb-$(CONFIG_TARGET_AP121) += ap121.dtb dtb-$(CONFIG_TARGET_AP143) += ap143.dtb dtb-$(CONFIG_TARGET_AP152) += ap152.dtb @@ -18,6 +15,8 @@ dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb +dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb +dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
Previous the dts files for gardena-smart-gateway-mt7688 and linkit-smart-7688 are set to be built when mtmips is selected. This can lead to a compilation error if another soc is added to this arch with different dtsi files. So it's better to build the dtb only if their board is selected. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> --- arch/mips/dts/Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)