| Message ID | 20201019094715.15343-3-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add DW PCIe support for Exynos5433 SoCs | expand |
On Mon, Oct 19, 2020 at 11:47:11AM +0200, Marek Szyprowski wrote: > From: Jaehoon Chung <jh80.chung@samsung.com> > > Add dt-bindings for the Samsung Exynos PCIe controller (Exynos5433 > variant). The title has typo and actually entire "Doc" should be dropped. Just "dt-bindings: pci:". This applies to all DT patches. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > [mszyprow: updated the binding to latest driver changes, rewrote it in yaml, > rewrote commit message] If you wrote them in YAML it should be a new patch of yours. It is the same then as converting TXT to YAML. > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../bindings/pci/samsung,exynos-pcie.yaml | 106 ++++++++++++++++++ > 1 file changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > new file mode 100644 > index 000000000000..48fb569c238c > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > @@ -0,0 +1,104 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung SoC series PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Jaehoon Chung <jh80.chung@samsung.com> > + > +description: |+ > + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare > + PCIe IP and thus inherits all the common properties defined in > + designware-pcie.txt. > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +properties: > + compatible: > + enum: > + - samsung,exynos5433-pcie const, not enum > + > + reg: > + items: > + - description: External Local Bus interface (ELBI) registers. > + - description: Data Bus Interface (DBI) registers. > + - description: PCIe configuration space region. > + > + reg-names: > + items: > + - const: elbi > + - const: bdi > + - const: config > + > + interrupts: > + maxItems: 1 > + > + clocks: > + items: > + - description: PCIe bridge clock > + - description: PCIe bus clock > + > + clock-names: > + items: > + - const: pcie > + - const: pcie_bus > + > + phys: > + maxItems: 1 > + > + phy-names: > + const: pcie-phy > + > + vdd10-supply: > + description: > + Phandle to a regulator that provides 1.0V power to the PCIe block. > + > + vdd18-supply: > + description: > + Phandle to a regulator that provides 1.8V power to the PCIe block. > + > +required: > + - reg > + - reg-names > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - phys > + - phy-names > + - vdd10-supply additionalProperties: false Best regards, Krzysztof
On Mon, 19 Oct 2020 at 12:12, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Mon, Oct 19, 2020 at 11:47:11AM +0200, Marek Szyprowski wrote: > > From: Jaehoon Chung <jh80.chung@samsung.com> > > > > Add dt-bindings for the Samsung Exynos PCIe controller (Exynos5433 > > variant). > > The title has typo and actually entire "Doc" should be dropped. Just > "dt-bindings: pci:". This applies to all DT patches. > > > > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > > [mszyprow: updated the binding to latest driver changes, rewrote it in yaml, > > rewrote commit message] > > If you wrote them in YAML it should be a new patch of yours. It is the > same then as converting TXT to YAML. > > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > > --- > > .../bindings/pci/samsung,exynos-pcie.yaml | 106 ++++++++++++++++++ > > 1 file changed, 106 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > > > > diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > > new file mode 100644 > > index 000000000000..48fb569c238c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > > @@ -0,0 +1,104 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Samsung SoC series PCIe Host Controller Device Tree Bindings > > + > > +maintainers: > > + - Jaehoon Chung <jh80.chung@samsung.com> > > + > > +description: |+ > > + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare > > + PCIe IP and thus inherits all the common properties defined in > > + designware-pcie.txt. > > + > > +allOf: > > + - $ref: /schemas/pci/pci-bus.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - samsung,exynos5433-pcie > > const, not enum > > > + > > + reg: > > + items: > > + - description: External Local Bus interface (ELBI) registers. > > + - description: Data Bus Interface (DBI) registers. > > + - description: PCIe configuration space region. > > + > > + reg-names: > > + items: > > + - const: elbi > > + - const: bdi > > + - const: config > > + > > + interrupts: > > + maxItems: 1 > > + > > + clocks: > > + items: > > + - description: PCIe bridge clock > > + - description: PCIe bus clock > > + > > + clock-names: > > + items: > > + - const: pcie > > + - const: pcie_bus > > + > > + phys: > > + maxItems: 1 > > + > > + phy-names: > > + const: pcie-phy > > + > > + vdd10-supply: > > + description: > > + Phandle to a regulator that provides 1.0V power to the PCIe block. > > + > > + vdd18-supply: > > + description: > > + Phandle to a regulator that provides 1.8V power to the PCIe block. > > + > > +required: > > + - reg > > + - reg-names > > + - interrupts > > + - interrupt-names > > + - clocks > > + - clock-names > > + - phys > > + - phy-names > > + - vdd10-supply > > additionalProperties: false This can be unevaluatedProperties, since you include pci-bus schema. However still you should either include designware schema or include it's properties here. Best regards, Krzysztof
On Mon, Oct 19, 2020 at 11:47:11AM +0200, Marek Szyprowski wrote: > From: Jaehoon Chung <jh80.chung@samsung.com> > > Add dt-bindings for the Samsung Exynos PCIe controller (Exynos5433 > variant). > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > [mszyprow: updated the binding to latest driver changes, rewrote it in yaml, > rewrote commit message] > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../bindings/pci/samsung,exynos-pcie.yaml | 106 ++++++++++++++++++ > 1 file changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > new file mode 100644 > index 000000000000..48fb569c238c > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > @@ -0,0 +1,104 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung SoC series PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Jaehoon Chung <jh80.chung@samsung.com> > + > +description: |+ > + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare > + PCIe IP and thus inherits all the common properties defined in > + designware-pcie.txt. > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +properties: > + compatible: > + enum: > + - samsung,exynos5433-pcie > + > + reg: > + items: > + - description: External Local Bus interface (ELBI) registers. > + - description: Data Bus Interface (DBI) registers. > + - description: PCIe configuration space region. > + > + reg-names: > + items: > + - const: elbi > + - const: bdi > + - const: config > + > + interrupts: > + maxItems: 1 > + > + clocks: > + items: > + - description: PCIe bridge clock > + - description: PCIe bus clock > + > + clock-names: > + items: > + - const: pcie > + - const: pcie_bus > + > + phys: > + maxItems: 1 > + > + phy-names: > + const: pcie-phy > + > + vdd10-supply: > + description: > + Phandle to a regulator that provides 1.0V power to the PCIe block. > + > + vdd18-supply: > + description: > + Phandle to a regulator that provides 1.8V power to the PCIe block. > + > +required: > + - reg > + - reg-names > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - phys > + - phy-names > + - vdd10-supply > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/exynos5433.h> > + > + pcie: pcie@15700000 { > + compatible = "samsung,exynos5433-pcie"; > + reg = <0x156b0000 0x1000>, <0x15700000 0x1000>, <0x0c000000 0x1000>; > + reg-names = "elbi", "dbi", "config"; You have a typo here. This does not pass dt_binbind_check. > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + device_type = "pci"; > + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; > + clock-names = "pcie", "pcie_bus"; > + phys = <&pcie_phy>; > + phy-names = "pcie-phy"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_bus &pcie_wlanen>; > + num-lanes = <1>; > + bus-range = <0x00 0xff>; > + ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, > + <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; > + vdd10-supply = <&ldo6_reg>; > + vdd18-supply = <&ldo7_reg>; > + iterrupt-map-mask = <0 0 0 0>; > + interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; This does not pass dt_binbind_check - your own bindings. You require interrupt-names. Best regards, Krzysztof
On Mon, Oct 19, 2020 at 4:47 AM Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > From: Jaehoon Chung <jh80.chung@samsung.com> > > Add dt-bindings for the Samsung Exynos PCIe controller (Exynos5433 > variant). > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > [mszyprow: updated the binding to latest driver changes, rewrote it in yaml, > rewrote commit message] > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../bindings/pci/samsung,exynos-pcie.yaml | 106 ++++++++++++++++++ > 1 file changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > new file mode 100644 > index 000000000000..48fb569c238c > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml > @@ -0,0 +1,104 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung SoC series PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Jaehoon Chung <jh80.chung@samsung.com> > + > +description: |+ > + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare > + PCIe IP and thus inherits all the common properties defined in > + designware-pcie.txt. > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +properties: > + compatible: > + enum: > + - samsung,exynos5433-pcie > + > + reg: > + items: > + - description: External Local Bus interface (ELBI) registers. > + - description: Data Bus Interface (DBI) registers. > + - description: PCIe configuration space region. > + > + reg-names: > + items: > + - const: elbi > + - const: bdi dbi > + - const: config > + > + interrupts: > + maxItems: 1 > + > + clocks: > + items: > + - description: PCIe bridge clock > + - description: PCIe bus clock > + > + clock-names: > + items: > + - const: pcie > + - const: pcie_bus > + > + phys: > + maxItems: 1 > + > + phy-names: > + const: pcie-phy Kind of a pointless name. > + > + vdd10-supply: > + description: > + Phandle to a regulator that provides 1.0V power to the PCIe block. > + > + vdd18-supply: > + description: > + Phandle to a regulator that provides 1.8V power to the PCIe block. > + > +required: > + - reg > + - reg-names > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - phys > + - phy-names > + - vdd10-supply > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/exynos5433.h> > + > + pcie: pcie@15700000 { > + compatible = "samsung,exynos5433-pcie"; > + reg = <0x156b0000 0x1000>, <0x15700000 0x1000>, <0x0c000000 0x1000>; > + reg-names = "elbi", "dbi", "config"; > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + device_type = "pci"; > + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; > + clock-names = "pcie", "pcie_bus"; > + phys = <&pcie_phy>; > + phy-names = "pcie-phy"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_bus &pcie_wlanen>; > + num-lanes = <1>; > + bus-range = <0x00 0xff>; > + ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, > + <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; > + vdd10-supply = <&ldo6_reg>; > + vdd18-supply = <&ldo7_reg>; > + iterrupt-map-mask = <0 0 0 0>; typo > + interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; > + }; > -- > 2.17.1 >
Hi Krzysztof, On 19.10.2020 12:18, Krzysztof Kozlowski wrote: > On Mon, 19 Oct 2020 at 12:12, Krzysztof Kozlowski <krzk@kernel.org> wrote: >> On Mon, Oct 19, 2020 at 11:47:11AM +0200, Marek Szyprowski wrote: >>> From: Jaehoon Chung <jh80.chung@samsung.com> >>> >>> Add dt-bindings for the Samsung Exynos PCIe controller (Exynos5433 >>> variant). >> The title has typo and actually entire "Doc" should be dropped. Just >> "dt-bindings: pci:". This applies to all DT patches. >> >>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>> [mszyprow: updated the binding to latest driver changes, rewrote it in yaml, >>> rewrote commit message] >> If you wrote them in YAML it should be a new patch of yours. It is the >> same then as converting TXT to YAML. >> >>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >>> --- >>> .../bindings/pci/samsung,exynos-pcie.yaml | 106 ++++++++++++++++++ >>> 1 file changed, 106 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml >>> >>> diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml >>> new file mode 100644 >>> index 000000000000..48fb569c238c >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml >>> @@ -0,0 +1,104 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: https://protect2.fireeye.com/v1/url?k=a6caf3f8-fb18e55d-a6cb78b7-0cc47a31bee8-bb3776dee0a03bbb&q=1&e=5f1b0c1e-e4d1-4ae2-b527-8cd5ec52695f&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fpci%2Fsamsung%2Cexynos-pcie.yaml%23 >>> +$schema: https://protect2.fireeye.com/v1/url?k=591573a2-04c76507-5914f8ed-0cc47a31bee8-bd08b2eac7a5040d&q=1&e=5f1b0c1e-e4d1-4ae2-b527-8cd5ec52695f&u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23 >>> + >>> +title: Samsung SoC series PCIe Host Controller Device Tree Bindings >>> + >>> +maintainers: >>> + - Jaehoon Chung <jh80.chung@samsung.com> >>> + >>> +description: |+ >>> + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare >>> + PCIe IP and thus inherits all the common properties defined in >>> + designware-pcie.txt. >>> + >>> +allOf: >>> + - $ref: /schemas/pci/pci-bus.yaml# >>> + >>> +properties: >>> + compatible: >>> + enum: >>> + - samsung,exynos5433-pcie >> const, not enum >> >>> + >>> + reg: >>> + items: >>> + - description: External Local Bus interface (ELBI) registers. >>> + - description: Data Bus Interface (DBI) registers. >>> + - description: PCIe configuration space region. >>> + >>> + reg-names: >>> + items: >>> + - const: elbi >>> + - const: bdi >>> + - const: config >>> + >>> + interrupts: >>> + maxItems: 1 >>> + >>> + clocks: >>> + items: >>> + - description: PCIe bridge clock >>> + - description: PCIe bus clock >>> + >>> + clock-names: >>> + items: >>> + - const: pcie >>> + - const: pcie_bus >>> + >>> + phys: >>> + maxItems: 1 >>> + >>> + phy-names: >>> + const: pcie-phy >>> + >>> + vdd10-supply: >>> + description: >>> + Phandle to a regulator that provides 1.0V power to the PCIe block. >>> + >>> + vdd18-supply: >>> + description: >>> + Phandle to a regulator that provides 1.8V power to the PCIe block. >>> + >>> +required: >>> + - reg >>> + - reg-names >>> + - interrupts >>> + - interrupt-names >>> + - clocks >>> + - clock-names >>> + - phys >>> + - phy-names >>> + - vdd10-supply >> additionalProperties: false > This can be unevaluatedProperties, since you include pci-bus schema. > However still you should either include designware schema or include > it's properties here. Frankly, I would like to include designware-pci bindling/schema, but it has not been converted to yaml yet. I don't feel that I know PCI enough to do that conversion... Best regards
Hi Rob, On 19.10.2020 15:38, Rob Herring wrote: > On Mon, Oct 19, 2020 at 4:47 AM Marek Szyprowski > <m.szyprowski@samsung.com> wrote: >> From: Jaehoon Chung <jh80.chung@samsung.com> >> >> Add dt-bindings for the Samsung Exynos PCIe controller (Exynos5433 >> variant). >> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> [mszyprow: updated the binding to latest driver changes, rewrote it in yaml, >> rewrote commit message] >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> --- >> .../bindings/pci/samsung,exynos-pcie.yaml | 106 ++++++++++++++++++ >> 1 file changed, 106 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml >> >> diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml >> new file mode 100644 >> index 000000000000..48fb569c238c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml >> @@ -0,0 +1,104 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: https://protect2.fireeye.com/v1/url?k=3dfd0348-6067aaeb-3dfc8807-002590f5b904-a68fd848316a7cc4&q=1&e=261ae2d1-4457-43b7-8727-35f3cfbc45c0&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fpci%2Fsamsung%2Cexynos-pcie.yaml%23 >> +$schema: https://protect2.fireeye.com/v1/url?k=ab825ba1-f618f202-ab83d0ee-002590f5b904-4aba44c12cb70753&q=1&e=261ae2d1-4457-43b7-8727-35f3cfbc45c0&u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23 >> + >> +title: Samsung SoC series PCIe Host Controller Device Tree Bindings >> + >> +maintainers: >> + - Jaehoon Chung <jh80.chung@samsung.com> >> + >> +description: |+ >> + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare >> + PCIe IP and thus inherits all the common properties defined in >> + designware-pcie.txt. >> + >> +allOf: >> + - $ref: /schemas/pci/pci-bus.yaml# >> + >> +properties: >> + compatible: >> + enum: >> + - samsung,exynos5433-pcie >> + >> + reg: >> + items: >> + - description: External Local Bus interface (ELBI) registers. >> + - description: Data Bus Interface (DBI) registers. >> + - description: PCIe configuration space region. >> + >> + reg-names: >> + items: >> + - const: elbi >> + - const: bdi > dbi > >> + - const: config >> + >> + interrupts: >> + maxItems: 1 >> + >> + clocks: >> + items: >> + - description: PCIe bridge clock >> + - description: PCIe bus clock >> + >> + clock-names: >> + items: >> + - const: pcie >> + - const: pcie_bus >> + >> + phys: >> + maxItems: 1 >> + >> + phy-names: >> + const: pcie-phy > Kind of a pointless name. Most of the other PCI(e) drivers uses such: # git grep "phy-names =" Documentation/devicetree/bindings/pci/ Do you want me to change it to simple "pcie"? >> + >> + vdd10-supply: >> + description: >> + Phandle to a regulator that provides 1.0V power to the PCIe block. >> + >> + vdd18-supply: >> + description: >> + Phandle to a regulator that provides 1.8V power to the PCIe block. >> + >> +required: >> + - reg >> + - reg-names >> + - interrupts >> + - interrupt-names >> + - clocks >> + - clock-names >> + - phys >> + - phy-names >> + - vdd10-supply >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/irq.h> >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + #include <dt-bindings/clock/exynos5433.h> >> + >> + pcie: pcie@15700000 { >> + compatible = "samsung,exynos5433-pcie"; >> + reg = <0x156b0000 0x1000>, <0x15700000 0x1000>, <0x0c000000 0x1000>; >> + reg-names = "elbi", "dbi", "config"; >> + #address-cells = <3>; >> + #size-cells = <2>; >> + #interrupt-cells = <1>; >> + device_type = "pci"; >> + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; >> + clock-names = "pcie", "pcie_bus"; >> + phys = <&pcie_phy>; >> + phy-names = "pcie-phy"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pcie_bus &pcie_wlanen>; >> + num-lanes = <1>; >> + bus-range = <0x00 0xff>; >> + ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, >> + <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; >> + vdd10-supply = <&ldo6_reg>; >> + vdd18-supply = <&ldo7_reg>; >> + iterrupt-map-mask = <0 0 0 0>; > typo > >> + interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> -- >> 2.17.1 >> Best regards
On Wed, Oct 21, 2020 at 01:59:25PM +0200, Marek Szyprowski wrote: >>> +required: > >>> + - reg > >>> + - reg-names > >>> + - interrupts > >>> + - interrupt-names > >>> + - clocks > >>> + - clock-names > >>> + - phys > >>> + - phy-names > >>> + - vdd10-supply > >> additionalProperties: false > > This can be unevaluatedProperties, since you include pci-bus schema. > > However still you should either include designware schema or include > > it's properties here. > > Frankly, I would like to include designware-pci bindling/schema, but it > has not been converted to yaml yet. I don't feel that I know PCI enough > to do that conversion... I think you need then include all properties in your dtschema. Otherwise DTS will not pass (neither the example here) the checks. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml new file mode 100644 index 000000000000..48fb569c238c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series PCIe Host Controller Device Tree Bindings + +maintainers: + - Jaehoon Chung <jh80.chung@samsung.com> + +description: |+ + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + designware-pcie.txt. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + enum: + - samsung,exynos5433-pcie + + reg: + items: + - description: External Local Bus interface (ELBI) registers. + - description: Data Bus Interface (DBI) registers. + - description: PCIe configuration space region. + + reg-names: + items: + - const: elbi + - const: bdi + - const: config + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PCIe bridge clock + - description: PCIe bus clock + + clock-names: + items: + - const: pcie + - const: pcie_bus + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + vdd10-supply: + description: + Phandle to a regulator that provides 1.0V power to the PCIe block. + + vdd18-supply: + description: + Phandle to a regulator that provides 1.8V power to the PCIe block. + +required: + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - phys + - phy-names + - vdd10-supply + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/exynos5433.h> + + pcie: pcie@15700000 { + compatible = "samsung,exynos5433-pcie"; + reg = <0x156b0000 0x1000>, <0x15700000 0x1000>, <0x0c000000 0x1000>; + reg-names = "elbi", "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; + clock-names = "pcie", "pcie_bus"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_bus &pcie_wlanen>; + num-lanes = <1>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, + <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; + vdd10-supply = <&ldo6_reg>; + vdd18-supply = <&ldo7_reg>; + iterrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + };