@@ -65,7 +65,7 @@ Required Properties:
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
- as child nodes of the pin-controller node. There should be atleast one
+ as child nodes of the pin-controller node. There should be at least one
child node and there is no limit on the count of these child nodes. It is
also possible for a child node to consist of several further child nodes
to allow grouping multiple pinctrl groups into one. The format of second
@@ -75,7 +75,7 @@ Required Properties:
The child node should contain a list of pin(s) on which a particular pin
function selection or pin configuration (or both) have to applied. This
list of pins is specified using the property name "samsung,pins". There
- should be atleast one pin specfied for this property and there is no upper
+ should be at least one pin specified for this property and there is no upper
limit on the count of pins that can be specified. The pins are specified
using pin names which are derived from the hardware manual of the SoC. As
an example, the pins in GPA0 bank of the pin controller can be represented
@@ -107,7 +107,7 @@ Required Properties:
hardware manual and these values are programmed as-is into the pin
pull up/down and driver strength register of the pin-controller.
- Note: A child should include atleast a pin function selection property or
+ Note: A child should include at least a pin function selection property or
pin configuration property (one or more) or both.
The client nodes that require a particular pin function selection and/or
@@ -9,7 +9,7 @@ Optional property:
- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
NPCM7xx contain four software reset that represent numbers 1 to 4.
- If 'nuvoton,sw-reset-number' is not specfied software reset is disabled.
+ If 'nuvoton,sw-reset-number' is not specified software reset is disabled.
Example:
rstc: rstc@f0801000 {
@@ -20,7 +20,7 @@ Optional properties:
This is useful in situations where another watchdog engine on chip is
to perform the reset.
- If 'aspeed,reset-type=' is not specfied the default is to enable system
+ If 'aspeed,reset-type=' is not specified the default is to enable system
reset.
Reset types:
Revised patch fixing six spelling errors within Documentation/devicetree/bindings/. "specfied" replaced with "specified" in all three files modified. "atleast" seperated into "at least" three times in samsung-pinctrl.txt. This should remove any confusion that a reader might have. Signed-off-by: Marlon Rac Cambasis <marlonrc08@gmail.com> --- .../devicetree/bindings/pinctrl/samsung-pinctrl.txt | 6 +++--- .../devicetree/bindings/reset/nuvoton,npcm-reset.txt | 2 +- Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-)