| Message ID | 4E3AD10D.6040907@aribaud.net |
|---|---|
| State | Superseded |
| Headers | show |
Dear Albert ARIBAUD, In message <4E3AD10D.6040907@aribaud.net> you wrote: > Hi Wolfgang, > > Here is my pull request for u-boot-arm/master, from which I did remove > the wrongly applied commits that you indicated and in which all patches > submitted before the merge window closure are taken into account. > > Developers, please direct complaints to me for any ARM-directed patches > submitted before the window closure, and which is not accounted for at > this point. > > Still to apply are bugfix patches submitted after window closure as > well as the UTF-8 conversion patch and the ARM board removal patch. > > The following changes since commit d50a8f45c9a640b3bcbd0ede91f83c8646cca018: > > Merge branch 'master' of git://git.denx.de/u-boot-mmc (2011-08-02 > 22:39:36 +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-arm.git master > > Ajay Bhargav (2): > Armada100: MFP macro naming correction > Armada100: Add Board Support for Marvell GuruPlug-Display > > Albert ARIBAUD (1): > Merge commit '7b2fac7654f7420c2787f74ec3b1540fa3b343e9' > > Andreas Bießmann (8): > ARM: remove obsolete at91rm9200 > MAKEALL: remove obsolete at91rm9200 soc > a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning > README.at91-soc: remove AT91(RM9200) joining notice > net/eth.c: drop obsolete at91rm9200 support > README: fix arm920t/at91 path > a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART > avr32: add grasshopper (ICnova AP7000) board > > Aneesh V (21): > omap1610h2: fix build breaks > omap5912osk: fix build breaks > omap1510inn: fix build breaks > omap1610inn: fix build breaks > omap2420h4: fix build breaks > omap730p2: fix build breaks > omap4: utility function to identify the context of hw init > omap4: cleanup pin mux data > omap4: add OMAP4430 revision check > omap4: add clock support > omap4: add sdram init support > omap4: calculate EMIF register values > omap4: automatic sdram detection > armv7: start.S: fixes and enhancements for SPL > omap: add basic SPL support > omap: add MMC and FAT support to SPL > omap4: add omap4460 revision detection > omap4: sdram init changes for omap4460 > omap: reuse omap3 gpio support in omap4 > omap4: support TPS programming > omap4: clock init support for omap4460 > > Asen Dimov (1): > AT91: change common at91sam9261 files to compile with new scheme > > Chander Kashyap (1): > SMDKV310: MMC_SPL: Fix building when using "make O=" > > Christopher Harvey (1): > Removed unused define, CONFIG_ARMV7. > > Dirk Behme (1): > ARMv7: u8500_href: Add missing header to fix compiler warning > > Heiko Schocher (1): > cosmetic: arm: lib/board.c: Coding Style cleanup > > Jason Cooper (1): > drivers/rtc: add Marvell Integrated RTC > > John Rigby (1): > mkimage: Add OMAP boot image support > > Laurence Withers (6): > DaVinci: rename gpio_defs.h to gpio.h > DA8xx: add generic GPIO driver > DaVinci EMAC: declare function for all DA8xx CPUs > DA8xx: add MMC/SD controller addresses > DA8xx: switch an enum to defines for consistency > DA8xx: fix LPSC constants > > Matthias Weisser (1): > arm: auto gen asm-offsets.h for mb86r0x > > Po-Yu Chuang (2): > arm: a320: fix multiline comment style > arm: a320: enable tagged list support > > Reinhard Meyer (3): > AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init) > MAKEALL: remove AT91 boards that are in boards.cfg > AT91/SPI: fix atmel_dataflash_spi.c to allow building without > warnings > > Sanjeev Premi (3): > omap3: Include array definition only when it is used > omap3evm: eth: split function setup_net_chip > omap3evm: eth: Include functions only when necessary > > Shiraz Hashim (1): > spear: fix build errors for spear3xx/spear600 platforms > > Sriramakrishnan (1): > omap3evm: Update ethernet reset sequence for Rev.G board > > Stefano Babic (1): > ARM: versatile: fix board support > > Thomas Abraham (1): > SMDKV310: Enable device tree support > > Xu, Hong (6): > AT91: Makes AT91SAM9RL SoC build correctly against > u-boot-atmel/master > AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master > AT91: SoC fix at91sam9261_matrix.h > AT91: Board fix for AT91SAM9261-EK > AT91: Makes AT91SAM9263 SoC build correctly against > u-boot-atmel/master > AT91: Makes AT91SAM9263-EK build correctly against > u-boot-atmel/master > > MAINTAINERS | 5 + > MAKEALL | 7 - > Makefile | 63 - > README | 2 +- > arch/arm/cpu/arm920t/at91/reset.c | 4 - > arch/arm/cpu/arm920t/at91rm9200/bcm5221.c | 232 ---- > arch/arm/cpu/arm920t/at91rm9200/dm9161.c | 225 ---- > arch/arm/cpu/arm920t/at91rm9200/ether.c | 316 ----- > arch/arm/cpu/arm920t/at91rm9200/i2c.c | 192 --- > arch/arm/cpu/arm920t/at91rm9200/ks8721.c | 249 ---- > arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S | 169 --- > arch/arm/cpu/arm920t/at91rm9200/lxt972.c | 192 --- > arch/arm/cpu/arm920t/at91rm9200/reset.c | 71 -- > arch/arm/cpu/arm920t/at91rm9200/spi.c | 152 --- > arch/arm/cpu/arm920t/at91rm9200/timer.c | 142 --- > arch/arm/cpu/arm920t/cpu.c | 4 - > arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- > arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 76 +- > arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 38 +- > arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 74 +- > arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 2 +- > arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 2 + > arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c | 65 + > arch/arm/cpu/armv7/Makefile | 7 +- > arch/arm/cpu/armv7/cpu.c | 7 + > arch/arm/cpu/armv7/omap-common/Makefile | 6 + > arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c | 41 +- > arch/arm/cpu/armv7/omap-common/spl.c | 272 ++++ > arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 62 + > arch/arm/cpu/armv7/omap-common/utils.c | 57 + > arch/arm/cpu/armv7/omap3/Makefile | 1 - > arch/arm/cpu/armv7/omap3/board.c | 12 + > arch/arm/cpu/armv7/omap3/sys_info.c | 3 + > arch/arm/cpu/armv7/omap4/Makefile | 6 + > arch/arm/cpu/armv7/omap4/board.c | 180 +++- > arch/arm/cpu/armv7/omap4/clocks.c | 940 ++++++++++++++ > .../panda => arch/arm/cpu/armv7/omap4}/config.mk | 25 +- > arch/arm/cpu/armv7/omap4/emif.c | 1310 > ++++++++++++++++++++ > arch/arm/cpu/armv7/omap4/lowlevel_init.S | 31 + > arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 76 ++ > arch/arm/cpu/armv7/omap4/sdram_elpida.c | 282 +++++ > arch/arm/cpu/armv7/start.S | 50 +- > arch/arm/cpu/armv7/u-boot.lds | 2 + > arch/arm/include/asm/arch-armada100/mfp.h | 4 +- > arch/arm/include/asm/arch-at91/at91_spi.h | 2 +- > arch/arm/include/asm/arch-at91/at91sam9261.h | 3 +- > .../arm/include/asm/arch-at91/at91sam9261_matrix.h | 77 +- > arch/arm/include/asm/arch-at91/at91sam9263.h | 13 + > .../arm/include/asm/arch-at91/at91sam9263_matrix.h | 146 +-- > arch/arm/include/asm/arch-at91/at91sam9rl.h | 185 ++-- > arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h | 121 +-- > arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h | 812 ------------ > arch/arm/include/asm/arch-at91rm9200/hardware.h | 75 -- > arch/arm/include/asm/arch-davinci/davinci_misc.h | 2 +- > .../asm/arch-davinci/{gpio_defs.h => gpio.h} | 8 + > arch/arm/include/asm/arch-davinci/hardware.h | 102 +- > arch/arm/include/asm/arch-kirkwood/kirkwood.h | 1 + > arch/arm/include/asm/arch-mb86r0x/asm-offsets.h | 74 -- > arch/arm/include/asm/arch-mb86r0x/mb86r0x.h | 42 + > arch/arm/include/asm/arch-omap3/cpu.h | 26 + > arch/arm/include/asm/arch-omap4/clocks.h | 690 +++++++++++ > arch/arm/include/asm/arch-omap4/cpu.h | 26 + > arch/arm/include/asm/arch-omap4/emif.h | 1040 ++++++++++++++++ > arch/arm/include/asm/arch-omap4/mux_omap4.h | 1 + > arch/arm/include/asm/arch-omap4/omap4.h | 61 +- > arch/arm/include/asm/arch-omap4/sys_proto.h | 72 ++- > arch/arm/include/asm/armv7.h | 6 + > arch/arm/include/asm/omap_common.h | 56 + > .../include/asm/{arch-omap3/gpio.h => omap_gpio.h} | 27 +- > arch/arm/lib/board.c | 216 ++-- > .../at91rm9200 => board/Marvell/gplugd}/Makefile | 45 +- > board/Marvell/gplugd/gplugd.c | 62 + > board/armltd/versatile/config.mk | 5 - > board/armltd/versatile/versatile.c | 10 +- > board/atmel/at91sam9261ek/at91sam9261ek.c | 136 ++- > board/atmel/at91sam9261ek/config.mk | 1 - > board/atmel/at91sam9261ek/led.c | 7 +- > board/atmel/at91sam9263ek/at91sam9263ek.c | 56 +- > board/atmel/at91sam9263ek/config.mk | 1 - > board/atmel/at91sam9263ek/led.c | 23 +- > board/atmel/at91sam9rlek/at91sam9rlek.c | 73 +- > board/atmel/at91sam9rlek/config.mk | 1 - > board/atmel/at91sam9rlek/led.c | 6 +- > board/davinci/dm355leopard/dm355leopard.c | 2 +- > board/davinci/dm365evm/dm365evm.c | 2 +- > .../in-circuit/grasshopper}/Makefile | 29 +- > board/in-circuit/grasshopper/grasshopper.c | 112 ++ > board/spear/common/spr_misc.c | 10 +- > board/st-ericsson/u8500/u8500_href.c | 1 + > board/ti/evm/evm.c | 45 +- > board/ti/evm/evm.h | 1 + > board/ti/panda/Makefile | 2 + > board/ti/panda/panda.c | 25 +- > board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} | 76 +- > board/ti/sdp4430/Makefile | 2 + > board/ti/sdp4430/config.mk | 31 - > board/ti/sdp4430/sdp.c | 25 +- > .../{panda/panda.h => sdp4430/sdp4430_mux_data.h} | 128 +-- > boards.cfg | 18 + > common/image.c | 6 +- > doc/README.at91-soc | 22 - > drivers/gpio/Makefile | 1 + > drivers/gpio/da8xx_gpio.c | 281 +++++ > drivers/rtc/Makefile | 1 + > drivers/rtc/mvrtc.c | 124 ++ > .../at91rm9200/usb.c => drivers/rtc/mvrtc.h | 64 +- > drivers/spi/atmel_dataflash_spi.c | 16 +- > drivers/usb/musb/da8xx.h | 2 +- > include/configs/a320evb.h | 34 +- > include/configs/am3517_crane.h | 1 - > include/configs/am3517_evm.h | 1 - > include/configs/at91sam9261ek.h | 133 ++- > include/configs/at91sam9263ek.h | 83 +- > include/configs/at91sam9rlek.h | 85 +- > include/configs/ca9x4_ct_vxp.h | 3 - > include/configs/cm_t35.h | 1 - > include/configs/devkit8000.h | 1 - > include/configs/dig297.h | 1 - > include/configs/gplugd.h | 87 ++ > include/configs/grasshopper.h | 198 +++ > include/configs/igep0020.h | 1 - > include/configs/igep0030.h | 1 - > include/configs/omap3_beagle.h | 1 - > include/configs/omap3_evm.h | 1 - > include/configs/omap3_overo.h | 1 - > include/configs/omap3_pandora.h | 1 - > include/configs/omap3_sdp3430.h | 1 - > include/configs/omap3_zoom1.h | 1 - > include/configs/omap3_zoom2.h | 1 - > include/configs/omap4_panda.h | 38 +- > include/configs/omap4_sdp4430.h | 38 +- > include/configs/s5p_goni.h | 1 - > include/configs/s5pc210_universal.h | 1 - > include/configs/smdkc100.h | 1 - > include/configs/smdkv310.h | 4 +- > include/configs/spear-common.h | 12 + > include/configs/versatile.h | 21 +- > include/image.h | 1 + > mmc_spl/board/samsung/smdkv310/Makefile | 12 +- > net/eth.c | 4 - > spl/Makefile | 6 + > tools/Makefile | 2 + > tools/mkimage.c | 2 + > tools/mkimage.h | 1 + > tools/omap/clocks_get_m_n.c | 197 +++ > tools/omapimage.c | 224 ++++ > tools/omapimage.h | 50 + > 147 files changed, 7971 insertions(+), 4275 deletions(-) > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c > delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c > create mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c > rename arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c (76%) > create mode 100644 arch/arm/cpu/armv7/omap-common/spl.c > create mode 100644 arch/arm/cpu/armv7/omap-common/u-boot-spl.lds > create mode 100644 arch/arm/cpu/armv7/omap-common/utils.c > create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c > rename {board/ti/panda => arch/arm/cpu/armv7/omap4}/config.mk (64%) > create mode 100644 arch/arm/cpu/armv7/omap4/emif.c > create mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h > create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c > delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h > delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h > rename arch/arm/include/asm/arch-davinci/{gpio_defs.h => gpio.h} (90%) > delete mode 100644 arch/arm/include/asm/arch-mb86r0x/asm-offsets.h > create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h > create mode 100644 arch/arm/include/asm/arch-omap4/emif.h > create mode 100644 arch/arm/include/asm/omap_common.h > rename arch/arm/include/asm/{arch-omap3/gpio.h => omap_gpio.h} (67%) > copy {arch/arm/cpu/arm920t/at91rm9200 => > board/Marvell/gplugd}/Makefile (54%) > create mode 100644 board/Marvell/gplugd/gplugd.c > delete mode 100644 board/armltd/versatile/config.mk > delete mode 100644 board/atmel/at91sam9261ek/config.mk > delete mode 100644 board/atmel/at91sam9263ek/config.mk > delete mode 100644 board/atmel/at91sam9rlek/config.mk > rename {arch/arm/cpu/arm920t/at91rm9200 => > board/in-circuit/grasshopper}/Makefile (73%) > create mode 100644 board/in-circuit/grasshopper/grasshopper.c > rename board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} (76%) > delete mode 100644 board/ti/sdp4430/config.mk > rename board/ti/{panda/panda.h => sdp4430/sdp4430_mux_data.h} (67%) > create mode 100644 drivers/gpio/da8xx_gpio.c > create mode 100644 drivers/rtc/mvrtc.c > rename arch/arm/cpu/arm920t/at91rm9200/usb.c => drivers/rtc/mvrtc.h (50%) > create mode 100644 include/configs/gplugd.h > create mode 100644 include/configs/grasshopper.h > create mode 100644 tools/omap/clocks_get_m_n.c > create mode 100644 tools/omapimage.c > create mode 100644 tools/omapimage.h Applied, thanks. Best regards, Wolfgang Denk
Dear Albert ARIBAUD, In message <4E3AD10D.6040907@aribaud.net> you wrote: > > Here is my pull request for u-boot-arm/master, from which I did remove > the wrongly applied commits that you indicated and in which all patches > submitted before the merge window closure are taken into account. > > Developers, please direct complaints to me for any ARM-directed patches > submitted before the window closure, and which is not accounted for at > this point. Hm... current build results are shattering; building for ARM with good old ELDK 4.2 gives this: --------------------- SUMMARY ---------------------------- Boards compiled: 201 Boards with warnings or errors: 99 ( assabet dnp1110 gcplus lart shannon ap7 ap720t armadillo B2 ep7312 evb4510 impa7 integratorap lpc2292sodimm modnet50 SMN42 ap920t ap922_XA10 ap926ejs ap946es ap966 cp920t cp922_XA10 cp926ejs cp946es cp966 edb9301 edb9302 edb9302a edb9307 edb9307a edb9312 edb9315 edb9315a imx27lite jadecpu lpd7a400 magnesium mx1fs2 netstar sbc2410x scb9328 smdk2400 smdk2410 spear300 spear310 spear320 spear600 VCMA9 versatile versatileab versatilepb voiceblue integratorcp cp1026 cp1136 omap2420h4 apollon imx31_litekit imx31_phycore imx31_phycore_eet mx31ads mx31pdk mx31pdk_nand qong dig297 igep0020 mx51evk omap3_beagle omap3_overo omap3_evm omap3_zoom2 omap4_panda omap4_sdp4430 at91cap9adk meesc meesc_dataflash pm9261 pm9263 at91sam9m10g45ek pm9g45 SBC35_A9G20 TNY_A9260 TNY_A9G20 csb226 lubbock zylonite actux1_4_16 actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4 dvlhost ixdp425 ixdpg425 pdnb3 scpu ) ---------------------------------------------------------- Note that many of these have always been builing fine before; recent patche smust have broken them. We seem to have a config problem as most boards throw (new) warnings like these: include/common.h:0: warning: target CPU does not support interworking include/common.h:0: warning: target CPU does not support interworking /home/wd/git/u-boot/work/lib/asm-offsets.c:1: warning: target CPU does not support interworking :0: warning: target CPU does not support interworking /work/wd/tmp-arm/include/asm/arch/clock.h:35: warning: function declaration isn't a prototype timer.c:45: error: static declaration of 'reset_timer_masked' follows non-static declaration /work/wd/tmp-arm/include2/asm/u-boot-arm.h:62: error: previous declaration of 'reset_timer_masked' was here /work/wd/tmp-arm/include/config.h:2:1: warning: "CONFIG_ARCH_VERSATILE_PB" redefined In file included from /work/wd/tmp-arm/include/config.h:6, from /home/wd/git/u-boot/work/include/common.h:37, from lmb.c:13: /home/wd/git/u-boot/work/include/configs/versatile.h:43:1: warning: this is the location of the previous definition Configuring for mx51evk - Board: mx51evk, Options: IMX_CONFIG=board/freescale/mx51evk/imximage.cfg lowlevel_init.S:24:34: error: asm/arch/asm-offsets.h: No such file or directory lowlevel_init.S:24:34: error: asm/arch/asm-offsets.h: No such file or directory dig297.c:44:27: error: asm/arch/gpio.h: No such file or directory clocks.c: In function 'do_setup_dpll': clocks.c:274: warning: comparison is always true due to limited range of data type clocks.c:276: warning: comparison is always true due to limited range of data type clocks.c:278: warning: comparison is always true due to limited range of data type clocks.c:280: warning: comparison is always true due to limited range of data type clocks.c:282: warning: comparison is always true due to limited range of data type clocks.c:284: warning: comparison is always true due to limited range of data type Configuring for omap3_zoom2 board... debug_board.c:25:27: error: asm/arch/gpio.h: No such file or directory led.c:25:27: error: asm/arch/gpio.h: No such file or directory zoom2.c:38:27: error: asm/arch/gpio.h: No such file or directory debug_board.c:25:27: error: asm/arch/gpio.h: No such file or directory debug_board.c: In function 'zoom2_debug_board_detect': debug_board.c:36: warning: implicit declaration of function 'omap_request_gpio' debug_board.c:41: warning: implicit declaration of function 'omap_set_gpio_direction' debug_board.c:42: warning: implicit declaration of function 'omap_get_gpio_datain' debug_board.c:43: warning: implicit declaration of function 'omap_free_gpio' etc. etc. ...usually ending in a segfault of the linker. Sorry, but this is not ripe yet for -rc1. Best regards, Wolfgang Denk
Dear Wolfgang, > Hm... current build results are shattering; building for ARM with good > old ELDK 4.2 gives this: > > --------------------- SUMMARY ---------------------------- > Boards compiled: 201 > Boards with warnings or errors: 99 ( assabet dnp1110 gcplus lart shannon ap7 ap720t armadillo > B2 ep7312 evb4510 impa7 integratorap lpc2292sodimm modnet50 SMN42 ap920t ap922_XA10 > ap926ejs ap946es ap966 cp920t cp922_XA10 cp926ejs cp946es cp966 edb9301 edb9302 edb9302a > edb9307 edb9307a edb9312 edb9315 edb9315a imx27lite jadecpu lpd7a400 magnesium mx1fs2 netstar > sbc2410x scb9328 smdk2400 smdk2410 spear300 spear310 spear320 spear600 VCMA9 versatile > versatileab versatilepb voiceblue integratorcp cp1026 cp1136 omap2420h4 apollon imx31 > litekit imx31_phycore imx31_phycore_eet mx31ads mx31pdk mx31pdk_nand qong dig297 igep0020 > mx51evk omap3_beagle omap3_overo omap3_evm omap3_zoom2 omap4_panda omap4_sdp4430 -- > at91cap9adk meesc meesc_dataflash pm9261 pm9263 at91sam9m10g45ek pm9g45 SBC35_A9G20 TNY_A9260 TNY_A9G20 -- > csb226 lubbock zylonite actux1_4_16 actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4 > dvlhost ixdp425 ixdpg425 pdnb3 scpu ) > ---------------------------------------------------------- For the Atmel boards this is correct for the current state of the ARM repo. It concurs with what my 4.5.2 gnu toolchain (running on 32 BIT) says. Reinhard
Dear Wolfgang, > > Hm... current build results are shattering; building for ARM with good > > old ELDK 4.2 gives this: > > > > --------------------- SUMMARY ---------------------------- > > Boards compiled: 201 > > Boards with warnings or errors: 99 ( assabet dnp1110 gcplus lart shannon ap7 ap720t armadillo > > B2 ep7312 evb4510 impa7 integratorap lpc2292sodimm modnet50 SMN42 ap920t ap922_XA10 > > ap926ejs ap946es ap966 cp920t cp922_XA10 cp926ejs cp946es cp966 edb9301 edb9302 edb9302a > > edb9307 edb9307a edb9312 edb9315 edb9315a imx27lite jadecpu lpd7a400 magnesium mx1fs2 netstar > > sbc2410x scb9328 smdk2400 smdk2410 spear300 spear310 spear320 spear600 VCMA9 versatile > > versatileab versatilepb voiceblue integratorcp cp1026 cp1136 omap2420h4 apollon imx31 > > litekit imx31_phycore imx31_phycore_eet mx31ads mx31pdk mx31pdk_nand qong dig297 igep0020 > > mx51evk omap3_beagle omap3_overo omap3_evm omap3_zoom2 omap4_panda omap4_sdp4430 > -- > > at91cap9adk meesc meesc_dataflash pm9261 pm9263 at91sam9m10g45ek pm9g45 SBC35_A9G20 TNY_A9260 TNY_A9G20 > -- > > csb226 lubbock zylonite actux1_4_16 actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4 > > dvlhost ixdp425 ixdpg425 pdnb3 scpu ) > > ---------------------------------------------------------- > > For the Atmel boards this is correct for the current state of the ARM > repo. It concurs with what my 4.5.2 gnu toolchain (running on 32 BIT) > says. That even concurs with what Albert has written after merging the Atmel repo: "Overall ARM builds (./MAKEALL arm) went from 199 boards built, 119 with warnings or errors before applying, to 201 boards, 97 with warnings or errors once applied." So it is about the same for EDLK (on 64 Bit?) I just pulled u-boot.git/master. It builds fine for all AT91 boards that have been fixed in that repo. Question is: what goes wrong if ELDK is on 32 Bit? Reinhard
Le 05/08/2011 03:08, Reinhard Meyer a écrit : > Dear Wolfgang, >>> Hm... current build results are shattering; building for ARM with good >>> old ELDK 4.2 gives this: >>> >>> --------------------- SUMMARY ---------------------------- >>> Boards compiled: 201 >>> Boards with warnings or errors: 99 ( assabet dnp1110 gcplus lart shannon ap7 ap720t armadillo >>> B2 ep7312 evb4510 impa7 integratorap lpc2292sodimm modnet50 SMN42 ap920t ap922_XA10 >>> ap926ejs ap946es ap966 cp920t cp922_XA10 cp926ejs cp946es cp966 edb9301 edb9302 edb9302a >>> edb9307 edb9307a edb9312 edb9315 edb9315a imx27lite jadecpu lpd7a400 magnesium mx1fs2 netstar >>> sbc2410x scb9328 smdk2400 smdk2410 spear300 spear310 spear320 spear600 VCMA9 versatile >>> versatileab versatilepb voiceblue integratorcp cp1026 cp1136 omap2420h4 apollon imx31 >>> litekit imx31_phycore imx31_phycore_eet mx31ads mx31pdk mx31pdk_nand qong dig297 igep0020 >>> mx51evk omap3_beagle omap3_overo omap3_evm omap3_zoom2 omap4_panda omap4_sdp4430 >> -- >>> at91cap9adk meesc meesc_dataflash pm9261 pm9263 at91sam9m10g45ek pm9g45 SBC35_A9G20 TNY_A9260 TNY_A9G20 >> -- >>> csb226 lubbock zylonite actux1_4_16 actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4 >>> dvlhost ixdp425 ixdpg425 pdnb3 scpu ) >>> ---------------------------------------------------------- >> >> For the Atmel boards this is correct for the current state of the ARM >> repo. It concurs with what my 4.5.2 gnu toolchain (running on 32 BIT) >> says. > > That even concurs with what Albert has written after merging the Atmel > repo: > "Overall ARM builds (./MAKEALL arm) went from 199 boards built, 119 with > warnings or errors before applying, to 201 boards, 97 with warnings or > errors once applied." > So it is about the same for EDLK (on 64 Bit?) > > I just pulled u-boot.git/master. It builds fine for all AT91 boards that > have been fixed in that repo. > > Question is: what goes wrong if ELDK is on 32 Bit? Since this is an ARM question, I'll look into it, and since Wolfgang will be on vacation, I suggest either that we either postpone -rc1, or (preferably IMO) that we tag -rc1 now with a specific warning about the ARM tree, and I analyze what the issue is using several ARM toolchains, both on a 32 and a 64 bits system, with a resolution on -rc2. I think the resolution should be fast because on a 32-bit system (sorry, don't have one any more, will keep a VM somewhere from now on...) the failure rate is 100%, thus I should be able to quickly set up a 32-bit VM and ELDK 4.2 and pinpoint the issue, say during the week-end. Amicalement,
Dear Albert, > Since this is an ARM question, I'll look into it, and since Wolfgang > will be on vacation, I suggest either that we either postpone -rc1, or > (preferably IMO) that we tag -rc1 now with a specific warning about the > ARM tree, and I analyze what the issue is using several ARM toolchains, > both on a 32 and a 64 bits system, with a resolution on -rc2. > > I think the resolution should be fast because on a 32-bit system (sorry, > don't have one any more, will keep a VM somewhere from now on...) the > failure rate is 100%, thus I should be able to quickly set up a 32-bit > VM and ELDK 4.2 and pinpoint the issue, say during the week-end. This is my results of "MAKEALL arm" on current u-boot-arm/master (6623feeaa463f5931fe684f900f605999cd844e2 Merge remote-tracking branch 'u-boot-atmel/master' into m): --------------------- SUMMARY ---------------------------- Boards compiled: 204 Boards with warnings or errors: 99 ( assabet dnp1110 gcplus lart shannon ap7 ap720t armadillo B2 ep7312 evb4510 impa7 integratorap lpc2292sodimm modnet50 SMN42 ap920t ap922_XA10 ap926ejs ap946es ap966 cp920t cp922_XA10 cp926ejs cp946es cp966 edb9301 edb9302 edb9302a edb9307 edb9307a edb9312 edb9315 edb9315a edminiv2 guruplug jadecpu km_kirkwood lpd7a400 mv88f6281gtw_ge mx1fs2 netstar openrd_base openrd_client openrd_ultimate portl2 rd6281a sbc2410x scb9328 sheevaplug smdk2400 smdk2410 spear300 spear310 spear320 spear600 VCMA9 versatile versatileab versatilepb voiceblue integratorcp cp1026 cp1136 omap2420h4 apollon imx31_litekit imx31_phycore imx31_phycore_eet mx31ads mx31pdk mx31pdk_nand qong smdk6400 dig297 igep0020 mx51evk omap3_beagle omap3_overo omap3_evm omap3_zoom2 omap4_panda omap4_sdp4430 at91cap9adk csb226 lubbock zylonite actux1_4_16 actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4 dvlhost ixdp425 ixdpg425 pdnb3 scpu ) ---------------------------------------------------------- Toolchain: arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.5.2-8ubuntu3) 4.5.2 on ubuntu 11.04 in virtual machine (VMware) on WinXP (32 Bit) Best Regards, Reinhard
Dear Albert Am 04.08.2011 19:04, schrieb Albert ARIBAUD: > Hi Wolfgang, > > Here is my pull request for u-boot-arm/master, from which I did remove > the wrongly applied commits that you indicated and in which all patches > submitted before the merge window closure are taken into account. > > Developers, please direct complaints to me for any ARM-directed patches > submitted before the window closure, and which is not accounted for at > this point. I still missing http://patchwork.ozlabs.org/patch/96842/ Thanks Matthias
Hi Albert, Sandeep On Thursday 04 August 2011 10:34 PM, Albert ARIBAUD wrote: > Hi Wolfgang, > > Here is my pull request for u-boot-arm/master, from which I did remove > the wrongly applied commits that you indicated and in which all patches > submitted before the merge window closure are taken into account. > > Developers, please direct complaints to me for any ARM-directed patches > submitted before the window closure, and which is not accounted for at > this point. > > Still to apply are bugfix patches submitted after window closure as > well as the UTF-8 conversion patch and the ARM board removal patch. I hope you will be taking the following critical fixes for arm/omap: 1. http://marc.info/?l=u-boot&m=131307370323792&w=2 2. http://patchwork.ozlabs.org/patch/107678/ 3. http://patchwork.ozlabs.org/patch/108865/ best regards, Aneesh
Hi Wolfgang, Here is my pull request for u-boot-arm/master, from which I did remove the wrongly applied commits that you indicated and in which all patches submitted before the merge window closure are taken into account. Developers, please direct complaints to me for any ARM-directed patches submitted before the window closure, and which is not accounted for at this point. Still to apply are bugfix patches submitted after window closure as well as the UTF-8 conversion patch and the ARM board removal patch. The following changes since commit d50a8f45c9a640b3bcbd0ede91f83c8646cca018: Merge branch 'master' of git://git.denx.de/u-boot-mmc (2011-08-02 22:39:36 +0200) are available in the git repository at: git://git.denx.de/u-boot-arm.git master Ajay Bhargav (2): Armada100: MFP macro naming correction Armada100: Add Board Support for Marvell GuruPlug-Display Albert ARIBAUD (1): Merge commit '7b2fac7654f7420c2787f74ec3b1540fa3b343e9' Andreas Bießmann (8): ARM: remove obsolete at91rm9200 MAKEALL: remove obsolete at91rm9200 soc a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning README.at91-soc: remove AT91(RM9200) joining notice net/eth.c: drop obsolete at91rm9200 support README: fix arm920t/at91 path a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART avr32: add grasshopper (ICnova AP7000) board Aneesh V (21): omap1610h2: fix build breaks omap5912osk: fix build breaks omap1510inn: fix build breaks omap1610inn: fix build breaks omap2420h4: fix build breaks omap730p2: fix build breaks omap4: utility function to identify the context of hw init omap4: cleanup pin mux data omap4: add OMAP4430 revision check omap4: add clock support omap4: add sdram init support omap4: calculate EMIF register values omap4: automatic sdram detection armv7: start.S: fixes and enhancements for SPL omap: add basic SPL support omap: add MMC and FAT support to SPL omap4: add omap4460 revision detection omap4: sdram init changes for omap4460 omap: reuse omap3 gpio support in omap4 omap4: support TPS programming omap4: clock init support for omap4460 Asen Dimov (1): AT91: change common at91sam9261 files to compile with new scheme Chander Kashyap (1): SMDKV310: MMC_SPL: Fix building when using "make O=" Christopher Harvey (1): Removed unused define, CONFIG_ARMV7. Dirk Behme (1): ARMv7: u8500_href: Add missing header to fix compiler warning Heiko Schocher (1): cosmetic: arm: lib/board.c: Coding Style cleanup Jason Cooper (1): drivers/rtc: add Marvell Integrated RTC John Rigby (1): mkimage: Add OMAP boot image support Laurence Withers (6): DaVinci: rename gpio_defs.h to gpio.h DA8xx: add generic GPIO driver DaVinci EMAC: declare function for all DA8xx CPUs DA8xx: add MMC/SD controller addresses DA8xx: switch an enum to defines for consistency DA8xx: fix LPSC constants Matthias Weisser (1): arm: auto gen asm-offsets.h for mb86r0x Po-Yu Chuang (2): arm: a320: fix multiline comment style arm: a320: enable tagged list support Reinhard Meyer (3): AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init) MAKEALL: remove AT91 boards that are in boards.cfg AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings Sanjeev Premi (3): omap3: Include array definition only when it is used omap3evm: eth: split function setup_net_chip omap3evm: eth: Include functions only when necessary Shiraz Hashim (1): spear: fix build errors for spear3xx/spear600 platforms Sriramakrishnan (1): omap3evm: Update ethernet reset sequence for Rev.G board Stefano Babic (1): ARM: versatile: fix board support Thomas Abraham (1): SMDKV310: Enable device tree support Xu, Hong (6): AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master AT91: SoC fix at91sam9261_matrix.h AT91: Board fix for AT91SAM9261-EK AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master MAINTAINERS | 5 + MAKEALL | 7 - Makefile | 63 - README | 2 +- arch/arm/cpu/arm920t/at91/reset.c | 4 - arch/arm/cpu/arm920t/at91rm9200/bcm5221.c | 232 ---- arch/arm/cpu/arm920t/at91rm9200/dm9161.c | 225 ---- arch/arm/cpu/arm920t/at91rm9200/ether.c | 316 ----- arch/arm/cpu/arm920t/at91rm9200/i2c.c | 192 --- arch/arm/cpu/arm920t/at91rm9200/ks8721.c | 249 ---- arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S | 169 --- arch/arm/cpu/arm920t/at91rm9200/lxt972.c | 192 --- arch/arm/cpu/arm920t/at91rm9200/reset.c | 71 -- arch/arm/cpu/arm920t/at91rm9200/spi.c | 152 --- arch/arm/cpu/arm920t/at91rm9200/timer.c | 142 --- arch/arm/cpu/arm920t/cpu.c | 4 - arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 76 +- arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 38 +- arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 74 +- arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 2 +- arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 2 + arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c | 65 + arch/arm/cpu/armv7/Makefile | 7 +- arch/arm/cpu/armv7/cpu.c | 7 + arch/arm/cpu/armv7/omap-common/Makefile | 6 + arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c | 41 +- arch/arm/cpu/armv7/omap-common/spl.c | 272 ++++ arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 62 + arch/arm/cpu/armv7/omap-common/utils.c | 57 + arch/arm/cpu/armv7/omap3/Makefile | 1 - arch/arm/cpu/armv7/omap3/board.c | 12 + arch/arm/cpu/armv7/omap3/sys_info.c | 3 + arch/arm/cpu/armv7/omap4/Makefile | 6 + arch/arm/cpu/armv7/omap4/board.c | 180 +++- arch/arm/cpu/armv7/omap4/clocks.c | 940 ++++++++++++++ .../panda => arch/arm/cpu/armv7/omap4}/config.mk | 25 +- arch/arm/cpu/armv7/omap4/emif.c | 1310 ++++++++++++++++++++ arch/arm/cpu/armv7/omap4/lowlevel_init.S | 31 + arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 76 ++ arch/arm/cpu/armv7/omap4/sdram_elpida.c | 282 +++++ arch/arm/cpu/armv7/start.S | 50 +- arch/arm/cpu/armv7/u-boot.lds | 2 + arch/arm/include/asm/arch-armada100/mfp.h | 4 +- arch/arm/include/asm/arch-at91/at91_spi.h | 2 +- arch/arm/include/asm/arch-at91/at91sam9261.h | 3 +- .../arm/include/asm/arch-at91/at91sam9261_matrix.h | 77 +- arch/arm/include/asm/arch-at91/at91sam9263.h | 13 + .../arm/include/asm/arch-at91/at91sam9263_matrix.h | 146 +-- arch/arm/include/asm/arch-at91/at91sam9rl.h | 185 ++-- arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h | 121 +-- arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h | 812 ------------ arch/arm/include/asm/arch-at91rm9200/hardware.h | 75 -- arch/arm/include/asm/arch-davinci/davinci_misc.h | 2 +- .../asm/arch-davinci/{gpio_defs.h => gpio.h} | 8 + arch/arm/include/asm/arch-davinci/hardware.h | 102 +- arch/arm/include/asm/arch-kirkwood/kirkwood.h | 1 + arch/arm/include/asm/arch-mb86r0x/asm-offsets.h | 74 -- arch/arm/include/asm/arch-mb86r0x/mb86r0x.h | 42 + arch/arm/include/asm/arch-omap3/cpu.h | 26 + arch/arm/include/asm/arch-omap4/clocks.h | 690 +++++++++++ arch/arm/include/asm/arch-omap4/cpu.h | 26 + arch/arm/include/asm/arch-omap4/emif.h | 1040 ++++++++++++++++ arch/arm/include/asm/arch-omap4/mux_omap4.h | 1 + arch/arm/include/asm/arch-omap4/omap4.h | 61 +- arch/arm/include/asm/arch-omap4/sys_proto.h | 72 ++- arch/arm/include/asm/armv7.h | 6 + arch/arm/include/asm/omap_common.h | 56 + .../include/asm/{arch-omap3/gpio.h => omap_gpio.h} | 27 +- arch/arm/lib/board.c | 216 ++-- .../at91rm9200 => board/Marvell/gplugd}/Makefile | 45 +- board/Marvell/gplugd/gplugd.c | 62 + board/armltd/versatile/config.mk | 5 - board/armltd/versatile/versatile.c | 10 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 136 ++- board/atmel/at91sam9261ek/config.mk | 1 - board/atmel/at91sam9261ek/led.c | 7 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 56 +- board/atmel/at91sam9263ek/config.mk | 1 - board/atmel/at91sam9263ek/led.c | 23 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 73 +- board/atmel/at91sam9rlek/config.mk | 1 - board/atmel/at91sam9rlek/led.c | 6 +- board/davinci/dm355leopard/dm355leopard.c | 2 +- board/davinci/dm365evm/dm365evm.c | 2 +- .../in-circuit/grasshopper}/Makefile | 29 +- board/in-circuit/grasshopper/grasshopper.c | 112 ++ board/spear/common/spr_misc.c | 10 +- board/st-ericsson/u8500/u8500_href.c | 1 + board/ti/evm/evm.c | 45 +- board/ti/evm/evm.h | 1 + board/ti/panda/Makefile | 2 + board/ti/panda/panda.c | 25 +- board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} | 76 +- board/ti/sdp4430/Makefile | 2 + board/ti/sdp4430/config.mk | 31 - board/ti/sdp4430/sdp.c | 25 +- .../{panda/panda.h => sdp4430/sdp4430_mux_data.h} | 128 +-- boards.cfg | 18 + common/image.c | 6 +- doc/README.at91-soc | 22 - drivers/gpio/Makefile | 1 + drivers/gpio/da8xx_gpio.c | 281 +++++ drivers/rtc/Makefile | 1 + drivers/rtc/mvrtc.c | 124 ++ .../at91rm9200/usb.c => drivers/rtc/mvrtc.h | 64 +- drivers/spi/atmel_dataflash_spi.c | 16 +- drivers/usb/musb/da8xx.h | 2 +- include/configs/a320evb.h | 34 +- include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/at91sam9261ek.h | 133 ++- include/configs/at91sam9263ek.h | 83 +- include/configs/at91sam9rlek.h | 85 +- include/configs/ca9x4_ct_vxp.h | 3 - include/configs/cm_t35.h | 1 - include/configs/devkit8000.h | 1 - include/configs/dig297.h | 1 - include/configs/gplugd.h | 87 ++ include/configs/grasshopper.h | 198 +++ include/configs/igep0020.h | 1 - include/configs/igep0030.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/omap3_zoom2.h | 1 - include/configs/omap4_panda.h | 38 +- include/configs/omap4_sdp4430.h | 38 +- include/configs/s5p_goni.h | 1 - include/configs/s5pc210_universal.h | 1 - include/configs/smdkc100.h | 1 - include/configs/smdkv310.h | 4 +- include/configs/spear-common.h | 12 + include/configs/versatile.h | 21 +- include/image.h | 1 + mmc_spl/board/samsung/smdkv310/Makefile | 12 +- net/eth.c | 4 - spl/Makefile | 6 + tools/Makefile | 2 + tools/mkimage.c | 2 + tools/mkimage.h | 1 + tools/omap/clocks_get_m_n.c | 197 +++ tools/omapimage.c | 224 ++++ tools/omapimage.h | 50 + 147 files changed, 7971 insertions(+), 4275 deletions(-) delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c create mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c rename arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c (76%) create mode 100644 arch/arm/cpu/armv7/omap-common/spl.c create mode 100644 arch/arm/cpu/armv7/omap-common/u-boot-spl.lds create mode 100644 arch/arm/cpu/armv7/omap-common/utils.c create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c rename {board/ti/panda => arch/arm/cpu/armv7/omap4}/config.mk (64%) create mode 100644 arch/arm/cpu/armv7/omap4/emif.c create mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h rename arch/arm/include/asm/arch-davinci/{gpio_defs.h => gpio.h} (90%) delete mode 100644 arch/arm/include/asm/arch-mb86r0x/asm-offsets.h create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h create mode 100644 arch/arm/include/asm/arch-omap4/emif.h create mode 100644 arch/arm/include/asm/omap_common.h rename arch/arm/include/asm/{arch-omap3/gpio.h => omap_gpio.h} (67%) copy {arch/arm/cpu/arm920t/at91rm9200 => board/Marvell/gplugd}/Makefile (54%) create mode 100644 board/Marvell/gplugd/gplugd.c delete mode 100644 board/armltd/versatile/config.mk delete mode 100644 board/atmel/at91sam9261ek/config.mk delete mode 100644 board/atmel/at91sam9263ek/config.mk delete mode 100644 board/atmel/at91sam9rlek/config.mk rename {arch/arm/cpu/arm920t/at91rm9200 => board/in-circuit/grasshopper}/Makefile (73%) create mode 100644 board/in-circuit/grasshopper/grasshopper.c rename board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} (76%) delete mode 100644 board/ti/sdp4430/config.mk rename board/ti/{panda/panda.h => sdp4430/sdp4430_mux_data.h} (67%) create mode 100644 drivers/gpio/da8xx_gpio.c create mode 100644 drivers/rtc/mvrtc.c rename arch/arm/cpu/arm920t/at91rm9200/usb.c => drivers/rtc/mvrtc.h (50%) create mode 100644 include/configs/gplugd.h create mode 100644 include/configs/grasshopper.h create mode 100644 tools/omap/clocks_get_m_n.c create mode 100644 tools/omapimage.c create mode 100644 tools/omapimage.h Amicalement,