@@ -469,7 +469,7 @@ opengl=""
opengl_dmabuf="no"
cpuid_h="no"
avx2_opt=""
-capstone=""
+capstone="auto"
lzo=""
snappy=""
bzip2=""
@@ -1573,7 +1573,7 @@ for opt do
;;
--enable-capstone) capstone="yes"
;;
- --enable-capstone=git) capstone="git"
+ --enable-capstone=git) capstone="internal"
;;
--enable-capstone=system) capstone="system"
;;
@@ -5124,51 +5124,11 @@ fi
# capstone
case "$capstone" in
- "" | yes)
- if $pkg_config capstone; then
- capstone=system
- elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
- capstone=git
- elif test -e "${source_path}/capstone/Makefile" ; then
- capstone=internal
- elif test -z "$capstone" ; then
- capstone=no
- else
- feature_not_found "capstone" "Install capstone devel or git submodule"
- fi
- ;;
-
- system)
- if ! $pkg_config capstone; then
- feature_not_found "capstone" "Install capstone devel"
- fi
- ;;
-esac
-
-case "$capstone" in
- git | internal)
- if test "$capstone" = git; then
+ auto | yes | internal)
+ # Simpler to always update submodule, even if not needed.
+ if test -e "${source_path}/.git" && test $git_update = 'yes' ; then
git_submodules="${git_submodules} capstone"
fi
- mkdir -p capstone
- if test "$mingw32" = "yes"; then
- LIBCAPSTONE=capstone.lib
- else
- LIBCAPSTONE=libcapstone.a
- fi
- capstone_libs="-Lcapstone -lcapstone"
- capstone_cflags="-I${source_path}/capstone/include"
- ;;
-
- system)
- capstone_libs="$($pkg_config --libs capstone)"
- capstone_cflags="$($pkg_config --cflags capstone)"
- ;;
-
- no)
- ;;
- *)
- error_exit "Unknown state for capstone: $capstone"
;;
esac
@@ -7288,11 +7248,6 @@ fi
if test "$ivshmem" = "yes" ; then
echo "CONFIG_IVSHMEM=y" >> $config_host_mak
fi
-if test "$capstone" != "no" ; then
- echo "CONFIG_CAPSTONE=y" >> $config_host_mak
- echo "CAPSTONE_CFLAGS=$capstone_cflags" >> $config_host_mak
- echo "CAPSTONE_LIBS=$capstone_libs" >> $config_host_mak
-fi
if test "$debug_mutex" = "yes" ; then
echo "CONFIG_DEBUG_MUTEX=y" >> $config_host_mak
fi
@@ -7816,9 +7771,6 @@ done # for target in $targets
if [ "$fdt" = "git" ]; then
subdirs="$subdirs dtc"
fi
-if [ "$capstone" = "git" -o "$capstone" = "internal" ]; then
- subdirs="$subdirs capstone"
-fi
echo "SUBDIRS=$subdirs" >> $config_host_mak
if test -n "$LIBCAPSTONE"; then
echo "LIBCAPSTONE=$LIBCAPSTONE" >> $config_host_mak
@@ -8005,7 +7957,8 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \
-Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
-Dsdl=$sdl -Dsdl_image=$sdl_image \
-Dvnc=$vnc -Dvnc_sasl=$vnc_sasl -Dvnc_jpeg=$vnc_jpeg -Dvnc_png=$vnc_png \
- -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f\
+ -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f \
+ -Dcapstone=$capstone \
$cross_arg \
"$PWD" "$source_path"
@@ -156,22 +156,6 @@ dtc/all: .git-submodule-status dtc/libfdt
dtc/%: .git-submodule-status
@mkdir -p $@
-# Overriding CFLAGS causes us to lose defines added in the sub-makefile.
-# Not overriding CFLAGS leads to mis-matches between compilation modes.
-# Therefore we replicate some of the logic in the sub-makefile.
-# Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
-# no need to annoy QEMU developers with such things.
-CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS)) $(CAPSTONE_CFLAGS)
-CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
-CAP_CFLAGS += -DCAPSTONE_HAS_ARM
-CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
-CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
-CAP_CFLAGS += -DCAPSTONE_HAS_X86
-
-.PHONY: capstone/all
-capstone/all: .git-submodule-status
- $(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
-
.PHONY: slirp/all
slirp/all: .git-submodule-status
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp \
@@ -10,6 +10,7 @@ else
keyval = import('unstable-keyval')
endif
ss = import('sourceset')
+fs = import('fs')
sh = find_program('sh')
cc = meson.get_compiler('c')
@@ -415,11 +416,6 @@ if 'CONFIG_USB_LIBUSB' in config_host
libusb = declare_dependency(compile_args: config_host['LIBUSB_CFLAGS'].split(),
link_args: config_host['LIBUSB_LIBS'].split())
endif
-capstone = not_found
-if 'CONFIG_CAPSTONE' in config_host
- capstone = declare_dependency(compile_args: config_host['CAPSTONE_CFLAGS'].split(),
- link_args: config_host['CAPSTONE_LIBS'].split())
-endif
libpmem = not_found
if 'CONFIG_LIBPMEM' in config_host
libpmem = declare_dependency(compile_args: config_host['LIBPMEM_CFLAGS'].split(),
@@ -476,7 +472,6 @@ foreach k, v: config_host
config_host_data.set(k, v == 'y' ? 1 : v)
endif
endforeach
-genh += configure_file(output: 'config-host.h', configuration: config_host_data)
minikconf = find_program('scripts/minikconf.py')
config_all_devices = {}
@@ -616,6 +611,106 @@ config_all += {
'CONFIG_ALL': true,
}
+capstone = not_found
+capstone_opt = get_option('capstone')
+if capstone_opt == 'no'
+ capstone_opt = false
+elif capstone_opt in ['yes', 'auto', 'system']
+ have_internal = fs.exists('capstone/Makefile')
+ capstone = dependency('capstone', static: enable_static,
+ required: capstone_opt == 'system' or
+ capstone_opt == 'yes' and not have_internal)
+ if capstone.found()
+ capstone_opt = 'system'
+ elif have_internal
+ capstone_opt = 'internal'
+ else
+ capstone_opt = false
+ endif
+endif
+if capstone_opt == 'internal'
+ capstone_data = configuration_data()
+ capstone_data.set('CAPSTONE_USE_SYS_DYN_MEM', '1')
+
+ capstone_files = files(
+ 'capstone/cs.c',
+ 'capstone/MCInst.c',
+ 'capstone/MCInstrDesc.c',
+ 'capstone/MCRegisterInfo.c',
+ 'capstone/SStream.c',
+ 'capstone/utils.c'
+ )
+
+ if 'CONFIG_ARM_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_ARM', '1')
+ capstone_files += files(
+ 'capstone/arch/ARM/ARMDisassembler.c',
+ 'capstone/arch/ARM/ARMInstPrinter.c',
+ 'capstone/arch/ARM/ARMMapping.c',
+ 'capstone/arch/ARM/ARMModule.c'
+ )
+ endif
+
+ # FIXME: This config entry currently depends on a c++ compiler.
+ # Which is needed for building libvixl, but not for capstone.
+ if 'CONFIG_ARM_A64_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_ARM64', '1')
+ capstone_files += files(
+ 'capstone/arch/AArch64/AArch64BaseInfo.c',
+ 'capstone/arch/AArch64/AArch64Disassembler.c',
+ 'capstone/arch/AArch64/AArch64InstPrinter.c',
+ 'capstone/arch/AArch64/AArch64Mapping.c',
+ 'capstone/arch/AArch64/AArch64Module.c'
+ )
+ endif
+
+ if 'CONFIG_PPC_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_POWERPC', '1')
+ capstone_files += files(
+ 'capstone/arch/PowerPC/PPCDisassembler.c',
+ 'capstone/arch/PowerPC/PPCInstPrinter.c',
+ 'capstone/arch/PowerPC/PPCMapping.c',
+ 'capstone/arch/PowerPC/PPCModule.c'
+ )
+ endif
+
+ if 'CONFIG_I386_DIS' in config_all_disas
+ capstone_data.set('CAPSTONE_HAS_X86', 1)
+ capstone_files += files(
+ 'capstone/arch/X86/X86Disassembler.c',
+ 'capstone/arch/X86/X86DisassemblerDecoder.c',
+ 'capstone/arch/X86/X86ATTInstPrinter.c',
+ 'capstone/arch/X86/X86IntelInstPrinter.c',
+ 'capstone/arch/X86/X86Mapping.c',
+ 'capstone/arch/X86/X86Module.c'
+ )
+ endif
+
+ configure_file(output: 'capstone-defs.h', configuration: capstone_data)
+
+ capstone_cargs = [
+ # FIXME: There does not seem to be a way to completely replace the c_args
+ # that come from add_project_arguments() -- we can only add to them.
+ # So: disable all warnings with a big hammer.
+ '-Wno-error', '-w',
+
+ # Include all configuration defines via a header file, which will wind up
+ # as a dependency on the object file, and thus changes here will result
+ # in a rebuild.
+ '-include', 'capstone-defs.h'
+ ]
+
+ libcapstone = static_library('capstone',
+ sources: capstone_files,
+ c_args: capstone_cargs,
+ include_directories: 'capstone/include')
+ capstone = declare_dependency(link_with: libcapstone,
+ include_directories: 'capstone/include')
+endif
+config_host_data.set('CONFIG_CAPSTONE', capstone.found())
+
+genh += configure_file(output: 'config-host.h', configuration: config_host_data)
+
# Generators
hxtool = find_program('scripts/hxtool')
@@ -1518,7 +1613,7 @@ summary_info += {'vvfat support': config_host.has_key('CONFIG_VVFAT')}
summary_info += {'qed support': config_host.has_key('CONFIG_QED')}
summary_info += {'parallels support': config_host.has_key('CONFIG_PARALLELS')}
summary_info += {'sheepdog support': config_host.has_key('CONFIG_SHEEPDOG')}
-summary_info += {'capstone': config_host.has_key('CONFIG_CAPSTONE')}
+summary_info += {'capstone': capstone_opt}
summary_info += {'libpmem support': config_host.has_key('CONFIG_LIBPMEM')}
summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
summary_info += {'libudev': config_host.has_key('CONFIG_LIBUDEV')}
@@ -22,3 +22,7 @@ option('vnc_sasl', type : 'feature', value : 'auto',
description: 'SASL authentication for VNC server')
option('xkbcommon', type : 'feature', value : 'auto',
description: 'xkbcommon support')
+
+option('capstone', type: 'combo', value: 'no',
+ choices: ['no', 'yes', 'auto', 'system', 'internal'],
+ description: 'Whether and how to find the capstone library')
There are better ways to do this, e.g. meson cmake subproject, but that requires cmake 3.7 and some of our CI environments only provide cmake 3.5. Nor can we add a meson.build file to capstone/, because the git submodule would then always report "untracked files". Fixing that would require creating our own branch on the qemu git mirror, at which point we could just as easily create a native meson subproject. Instead, build the library via the main meson.build. This improves the current state of affairs in that we will re-link the qemu executables against a changed libcapstone.a, which we wouldn't do before-hand. In addition, the use of the confuration header file instead of command-line -DEFINES means that we will rebuild the capstone objects with changes to meson.build. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- Cc: Paolo Bonzini <pbonzini@redhat.com> v2: Further reduce probing in configure (paolo), Drop state 'internal' and use 'git' even when it isn't git. Move CONFIG_CAPSTONE to config_host_data. --- configure | 61 +++----------------------- Makefile | 16 ------- meson.build | 109 +++++++++++++++++++++++++++++++++++++++++++--- meson_options.txt | 4 ++ 4 files changed, 113 insertions(+), 77 deletions(-)