Message ID | 1311843846-27336-1-git-send-email-grinberg@compulab.co.il |
---|---|
State | Superseded |
Delegated to: | Albert ARIBAUD |
Headers | show |
On 28 July 2011 14:34, Igor Grinberg <grinberg@compulab.co.il> wrote: > gd->bd pointer has been used prior been initialized. > Move the relevant code after the initialization. > > Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> tested-by: Chander Kashyap <chander.kashyap@linaro.org> > --- > arch/arm/lib/board.c | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c > index bcbf697..52e90db 100644 > --- a/arch/arm/lib/board.c > +++ b/arch/arm/lib/board.c > @@ -281,10 +281,6 @@ void board_init_f (ulong bootflag) > > gd->mon_len = _bss_end_ofs; > > -#ifdef CONFIG_MACH_TYPE > - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ > -#endif > - > for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { > if ((*init_fnc_ptr)() != 0) { > hang (); > @@ -409,6 +405,10 @@ void board_init_f (ulong bootflag) > post_run (NULL, POST_ROM | post_bootmode_get(0)); > #endif > > +#ifdef CONFIG_MACH_TYPE > + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ > +#endif > + > gd->bd->bi_baudrate = gd->baudrate; > /* Ram ist board specific, so move it to board code ... */ > dram_init_banksize(); > -- > 1.7.3.4 > >
Hi Igor, On 28/07/2011 11:04, Igor Grinberg wrote: > gd->bd pointer has been used prior been initialized. > Move the relevant code after the initialization. > > Signed-off-by: Igor Grinberg<grinberg@compulab.co.il> > --- > arch/arm/lib/board.c | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c > index bcbf697..52e90db 100644 > --- a/arch/arm/lib/board.c > +++ b/arch/arm/lib/board.c > @@ -281,10 +281,6 @@ void board_init_f (ulong bootflag) > > gd->mon_len = _bss_end_ofs; > > -#ifdef CONFIG_MACH_TYPE > - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ > -#endif > - > for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { > if ((*init_fnc_ptr)() != 0) { > hang (); > @@ -409,6 +405,10 @@ void board_init_f (ulong bootflag) > post_run (NULL, POST_ROM | post_bootmode_get(0)); > #endif > > +#ifdef CONFIG_MACH_TYPE > + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ > +#endif > + > gd->bd->bi_baudrate = gd->baudrate; > /* Ram ist board specific, so move it to board code ... */ > dram_init_banksize(); As a bugfix, I'd like to pull this patch in now. However, it does not apply cleanly to current u-boot-arm/master, and besides, I'd rather have the bi_arch_number initialized as soon as bd is set up, i.e. just after the assignment to gd->bd. Amicalement,
Hi Albert, Sorry for the poor responsiveness - I was out of office for about 2 weeks. On 08/12/11 12:20, Albert ARIBAUD wrote: > Hi Igor, > > On 28/07/2011 11:04, Igor Grinberg wrote: >> gd->bd pointer has been used prior been initialized. >> Move the relevant code after the initialization. >> >> Signed-off-by: Igor Grinberg<grinberg@compulab.co.il> >> --- >> arch/arm/lib/board.c | 8 ++++---- >> 1 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c >> index bcbf697..52e90db 100644 >> --- a/arch/arm/lib/board.c >> +++ b/arch/arm/lib/board.c >> @@ -281,10 +281,6 @@ void board_init_f (ulong bootflag) >> >> gd->mon_len = _bss_end_ofs; >> >> -#ifdef CONFIG_MACH_TYPE >> - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ >> -#endif >> - >> for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { >> if ((*init_fnc_ptr)() != 0) { >> hang (); >> @@ -409,6 +405,10 @@ void board_init_f (ulong bootflag) >> post_run (NULL, POST_ROM | post_bootmode_get(0)); >> #endif >> >> +#ifdef CONFIG_MACH_TYPE >> + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ >> +#endif >> + >> gd->bd->bi_baudrate = gd->baudrate; >> /* Ram ist board specific, so move it to board code ... */ >> dram_init_banksize(); > > As a bugfix, I'd like to pull this patch in now. However, it does not apply cleanly to current u-boot-arm/master, and besides, I'd rather have the bi_arch_number initialized as soon as bd is set up, i.e. just after the assignment to gd->bd. Well, it applied cleanly for me... Nevertheless, I'm sending a v2 rebased on top of the most recent u-boot-arm/master with your requested change.
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index bcbf697..52e90db 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -281,10 +281,6 @@ void board_init_f (ulong bootflag) gd->mon_len = _bss_end_ofs; -#ifdef CONFIG_MACH_TYPE - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ -#endif - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr)() != 0) { hang (); @@ -409,6 +405,10 @@ void board_init_f (ulong bootflag) post_run (NULL, POST_ROM | post_bootmode_get(0)); #endif +#ifdef CONFIG_MACH_TYPE + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ +#endif + gd->bd->bi_baudrate = gd->baudrate; /* Ram ist board specific, so move it to board code ... */ dram_init_banksize();
gd->bd pointer has been used prior been initialized. Move the relevant code after the initialization. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> --- arch/arm/lib/board.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)