diff mbox series

[V2,6/9] PCI: Add 'rcec' field to pci_dev for associated RCiEPs

Message ID 20200804194052.193272-7-sean.v.kelley@intel.com
State New
Headers show
Series Add RCEC handling to PCI/AER | expand

Commit Message

Kelley, Sean V Aug. 4, 2020, 7:40 p.m. UTC 
From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

When attempting error recovery for an RCiEP associated with an RCEC device,
there needs to be a way to update the Root Error Status, the Uncorrectable
Error Status and the Uncorrectable Error Severity of the parent RCEC.
So add the 'rcec' field to the pci_dev structure and provide a hook for the
Root Port Driver to associate RCiEPs with their respective parent RCEC.

Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
---
 drivers/pci/pcie/aer.c         |  9 +++++----
 drivers/pci/pcie/err.c         | 12 ++++++++++++
 drivers/pci/pcie/portdrv_pci.c | 15 +++++++++++++++
 include/linux/pci.h            |  3 +++
 4 files changed, 35 insertions(+), 4 deletions(-)

Comments

Jonathan Cameron Aug. 5, 2020, 5:40 p.m. UTC | #1 
On Tue, 4 Aug 2020 12:40:49 -0700
Sean V Kelley <sean.v.kelley@intel.com> wrote:

> From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
> 
> When attempting error recovery for an RCiEP associated with an RCEC device,
> there needs to be a way to update the Root Error Status, the Uncorrectable
> Error Status and the Uncorrectable Error Severity of the parent RCEC.
> So add the 'rcec' field to the pci_dev structure and provide a hook for the
> Root Port Driver to associate RCiEPs with their respective parent RCEC.
> 
> Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Hi,

One question in line.

> ---
>  drivers/pci/pcie/aer.c         |  9 +++++----
>  drivers/pci/pcie/err.c         | 12 ++++++++++++
>  drivers/pci/pcie/portdrv_pci.c | 15 +++++++++++++++
>  include/linux/pci.h            |  3 +++
>  4 files changed, 35 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 87283cda3990..f658607e8e00 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1358,17 +1358,18 @@ static int aer_probe(struct pcie_device *dev)
>  static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>  {
>  	int aer = dev->aer_cap;
> +	int rc = 0;
>  	u32 reg32;
> -	int rc;
> -
>  
>  	/* Disable Root's interrupt in response to error messages */
>  	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>  	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
>  	pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
>  
> -	rc = pci_bus_error_reset(dev);
> -	pci_info(dev, "Root Port link has been reset\n");
> +	if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC) {
> +		rc = pci_bus_error_reset(dev);
> +		pci_info(dev, "Root Port link has been reset\n");
> +	}
>  
>  	/* Clear Root Error Status */
>  	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &reg32);
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 4812aa678eff..43f1c55c76db 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -203,6 +203,12 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  		pci_walk_dev_affected(dev, report_frozen_detected, &status);
>  		if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
>  			status = flr_on_rciep(dev);
> +			/*
> +			 * The callback only clears the Root Error Status
> +			 * of the RCEC (see aer.c).
> +			 */
> +			if (pcie_aer_is_native(dev) && dev->rcec)
> +				reset_link(dev->rcec);

I'm not sure about this pcie_aer_is_native check.
We don't check in the normal EP path.  Perhaps we should be checking there
as well?

I can contrive a CPER record that hits the reset_link for the normal EP on my qemu
test setup.  Just for fun it causes a synchronous external abort that I need
to track down but not related this patch or indeed reset_link and may just reflect
an impossible to hit path in the e1000e driver.

It needs a very contrived combination of blocks that say the error is fatal
and others that say it isn't so I'm not that worried about that.


>  			if (status != PCI_ERS_RESULT_RECOVERED) {
>  				pci_warn(dev, "function level reset failed\n");
>  				goto failed;
> @@ -247,7 +253,13 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  		if (pcie_aer_is_native(dev))
>  			pcie_clear_device_status(dev);
>  		pci_aer_clear_nonfatal_status(dev);
> +	} else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
> +		if (pcie_aer_is_native(dev) && dev->rcec)
> +			pcie_clear_device_status(dev->rcec);
> +		if (dev->rcec)
> +			pci_aer_clear_nonfatal_status(dev->rcec);
>  	}
> +
>  	pci_info(dev, "device recovery successful\n");
>  	return status;
>  
> diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
> index 4d880679b9b1..dff5c9e13412 100644
> --- a/drivers/pci/pcie/portdrv_pci.c
> +++ b/drivers/pci/pcie/portdrv_pci.c
> @@ -90,6 +90,18 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
>  #define PCIE_PORTDRV_PM_OPS	NULL
>  #endif /* !PM */
>  
> +static int pcie_hook_rcec(struct pci_dev *pdev, void *data)
> +{
> +	struct pci_dev *rcec = (struct pci_dev *)data;
> +
> +	pdev->rcec = rcec;
> +	pci_dbg(rcec, "RCiEP(under an RCEC) %04x:%02x:%02x.%d\n",
> +		pci_domain_nr(pdev->bus), pdev->bus->number,
> +		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
> +
> +	return 0;
> +}
> +
>  /*
>   * pcie_portdrv_probe - Probe PCI-Express port devices
>   * @dev: PCI-Express port device being probed
> @@ -110,6 +122,9 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
>  	     (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC)))
>  		return -ENODEV;
>  
> +	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)
> +		pcie_walk_rcec(dev, pcie_hook_rcec, dev);
> +
>  	status = pcie_port_device_register(dev);
>  	if (status)
>  		return status;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index ee49469bd2b5..d5f7dbbf5e2f 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -326,6 +326,9 @@ struct pci_dev {
>  #ifdef CONFIG_PCIEAER
>  	u16		aer_cap;	/* AER capability offset */
>  	struct aer_stats *aer_stats;	/* AER stats for this device */
> +#endif
> +#ifdef CONFIG_PCIEPORTBUS
> +	struct pci_dev	*rcec;		/* Associated RCEC device */
>  #endif
>  	u8		pcie_cap;	/* PCIe capability offset */
>  	u8		msi_cap;	/* MSI capability offset */
Kelley, Sean V Aug. 5, 2020, 5:48 p.m. UTC | #2 
On 5 Aug 2020, at 10:40, Jonathan Cameron wrote:

> On Tue, 4 Aug 2020 12:40:49 -0700
> Sean V Kelley <sean.v.kelley@intel.com> wrote:
>
>> From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>>
>> When attempting error recovery for an RCiEP associated with an RCEC 
>> device,
>> there needs to be a way to update the Root Error Status, the 
>> Uncorrectable
>> Error Status and the Uncorrectable Error Severity of the parent RCEC.
>> So add the 'rcec' field to the pci_dev structure and provide a hook 
>> for the
>> Root Port Driver to associate RCiEPs with their respective parent 
>> RCEC.
>>
>> Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
>> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
> Hi,
>
> One question in line.
>
>> ---
>>  drivers/pci/pcie/aer.c         |  9 +++++----
>>  drivers/pci/pcie/err.c         | 12 ++++++++++++
>>  drivers/pci/pcie/portdrv_pci.c | 15 +++++++++++++++
>>  include/linux/pci.h            |  3 +++
>>  4 files changed, 35 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
>> index 87283cda3990..f658607e8e00 100644
>> --- a/drivers/pci/pcie/aer.c
>> +++ b/drivers/pci/pcie/aer.c
>> @@ -1358,17 +1358,18 @@ static int aer_probe(struct pcie_device *dev)
>>  static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>>  {
>>  	int aer = dev->aer_cap;
>> +	int rc = 0;
>>  	u32 reg32;
>> -	int rc;
>> -
>>
>>  	/* Disable Root's interrupt in response to error messages */
>>  	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>>  	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
>>  	pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
>>
>> -	rc = pci_bus_error_reset(dev);
>> -	pci_info(dev, "Root Port link has been reset\n");
>> +	if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC) {
>> +		rc = pci_bus_error_reset(dev);
>> +		pci_info(dev, "Root Port link has been reset\n");
>> +	}
>>
>>  	/* Clear Root Error Status */
>>  	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &reg32);
>> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>> index 4812aa678eff..43f1c55c76db 100644
>> --- a/drivers/pci/pcie/err.c
>> +++ b/drivers/pci/pcie/err.c
>> @@ -203,6 +203,12 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev 
>> *dev,
>>  		pci_walk_dev_affected(dev, report_frozen_detected, &status);
>>  		if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
>>  			status = flr_on_rciep(dev);
>> +			/*
>> +			 * The callback only clears the Root Error Status
>> +			 * of the RCEC (see aer.c).
>> +			 */
>> +			if (pcie_aer_is_native(dev) && dev->rcec)
>> +				reset_link(dev->rcec);
>
> I'm not sure about this pcie_aer_is_native check.
> We don't check in the normal EP path.  Perhaps we should be checking 
> there
> as well?

Looks like we should.  Will make adjustments and test.

>
> I can contrive a CPER record that hits the reset_link for the normal 
> EP on my qemu
> test setup.  Just for fun it causes a synchronous external abort that 
> I need
> to track down but not related this patch or indeed reset_link and may 
> just reflect
> an impossible to hit path in the e1000e driver.
>
> It needs a very contrived combination of blocks that say the error is 
> fatal
> and others that say it isn't so I'm not that worried about that.

Okay, will also test on my end.

Thanks,

Sean

>
>
>>  			if (status != PCI_ERS_RESULT_RECOVERED) {
>>  				pci_warn(dev, "function level reset failed\n");
>>  				goto failed;
>> @@ -247,7 +253,13 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev 
>> *dev,
>>  		if (pcie_aer_is_native(dev))
>>  			pcie_clear_device_status(dev);
>>  		pci_aer_clear_nonfatal_status(dev);
>> +	} else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
>> +		if (pcie_aer_is_native(dev) && dev->rcec)
>> +			pcie_clear_device_status(dev->rcec);
>> +		if (dev->rcec)
>> +			pci_aer_clear_nonfatal_status(dev->rcec);
>>  	}
>> +
>>  	pci_info(dev, "device recovery successful\n");
>>  	return status;
>>
>> diff --git a/drivers/pci/pcie/portdrv_pci.c 
>> b/drivers/pci/pcie/portdrv_pci.c
>> index 4d880679b9b1..dff5c9e13412 100644
>> --- a/drivers/pci/pcie/portdrv_pci.c
>> +++ b/drivers/pci/pcie/portdrv_pci.c
>> @@ -90,6 +90,18 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops 
>> = {
>>  #define PCIE_PORTDRV_PM_OPS	NULL
>>  #endif /* !PM */
>>
>> +static int pcie_hook_rcec(struct pci_dev *pdev, void *data)
>> +{
>> +	struct pci_dev *rcec = (struct pci_dev *)data;
>> +
>> +	pdev->rcec = rcec;
>> +	pci_dbg(rcec, "RCiEP(under an RCEC) %04x:%02x:%02x.%d\n",
>> +		pci_domain_nr(pdev->bus), pdev->bus->number,
>> +		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
>> +
>> +	return 0;
>> +}
>> +
>>  /*
>>   * pcie_portdrv_probe - Probe PCI-Express port devices
>>   * @dev: PCI-Express port device being probed
>> @@ -110,6 +122,9 @@ static int pcie_portdrv_probe(struct pci_dev 
>> *dev,
>>  	     (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC)))
>>  		return -ENODEV;
>>
>> +	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)
>> +		pcie_walk_rcec(dev, pcie_hook_rcec, dev);
>> +
>>  	status = pcie_port_device_register(dev);
>>  	if (status)
>>  		return status;
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index ee49469bd2b5..d5f7dbbf5e2f 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -326,6 +326,9 @@ struct pci_dev {
>>  #ifdef CONFIG_PCIEAER
>>  	u16		aer_cap;	/* AER capability offset */
>>  	struct aer_stats *aer_stats;	/* AER stats for this device */
>> +#endif
>> +#ifdef CONFIG_PCIEPORTBUS
>> +	struct pci_dev	*rcec;		/* Associated RCEC device */
>>  #endif
>>  	u8		pcie_cap;	/* PCIe capability offset */
>>  	u8		msi_cap;	/* MSI capability offset */
diff mbox series

Patch

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 87283cda3990..f658607e8e00 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1358,17 +1358,18 @@  static int aer_probe(struct pcie_device *dev)
 static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 {
 	int aer = dev->aer_cap;
+	int rc = 0;
 	u32 reg32;
-	int rc;
-
 
 	/* Disable Root's interrupt in response to error messages */
 	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
 	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
 	pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
 
-	rc = pci_bus_error_reset(dev);
-	pci_info(dev, "Root Port link has been reset\n");
+	if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC) {
+		rc = pci_bus_error_reset(dev);
+		pci_info(dev, "Root Port link has been reset\n");
+	}
 
 	/* Clear Root Error Status */
 	pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &reg32);
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 4812aa678eff..43f1c55c76db 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -203,6 +203,12 @@  pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 		pci_walk_dev_affected(dev, report_frozen_detected, &status);
 		if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
 			status = flr_on_rciep(dev);
+			/*
+			 * The callback only clears the Root Error Status
+			 * of the RCEC (see aer.c).
+			 */
+			if (pcie_aer_is_native(dev) && dev->rcec)
+				reset_link(dev->rcec);
 			if (status != PCI_ERS_RESULT_RECOVERED) {
 				pci_warn(dev, "function level reset failed\n");
 				goto failed;
@@ -247,7 +253,13 @@  pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 		if (pcie_aer_is_native(dev))
 			pcie_clear_device_status(dev);
 		pci_aer_clear_nonfatal_status(dev);
+	} else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
+		if (pcie_aer_is_native(dev) && dev->rcec)
+			pcie_clear_device_status(dev->rcec);
+		if (dev->rcec)
+			pci_aer_clear_nonfatal_status(dev->rcec);
 	}
+
 	pci_info(dev, "device recovery successful\n");
 	return status;
 
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 4d880679b9b1..dff5c9e13412 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -90,6 +90,18 @@  static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 #define PCIE_PORTDRV_PM_OPS	NULL
 #endif /* !PM */
 
+static int pcie_hook_rcec(struct pci_dev *pdev, void *data)
+{
+	struct pci_dev *rcec = (struct pci_dev *)data;
+
+	pdev->rcec = rcec;
+	pci_dbg(rcec, "RCiEP(under an RCEC) %04x:%02x:%02x.%d\n",
+		pci_domain_nr(pdev->bus), pdev->bus->number,
+		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+	return 0;
+}
+
 /*
  * pcie_portdrv_probe - Probe PCI-Express port devices
  * @dev: PCI-Express port device being probed
@@ -110,6 +122,9 @@  static int pcie_portdrv_probe(struct pci_dev *dev,
 	     (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC)))
 		return -ENODEV;
 
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)
+		pcie_walk_rcec(dev, pcie_hook_rcec, dev);
+
 	status = pcie_port_device_register(dev);
 	if (status)
 		return status;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index ee49469bd2b5..d5f7dbbf5e2f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -326,6 +326,9 @@  struct pci_dev {
 #ifdef CONFIG_PCIEAER
 	u16		aer_cap;	/* AER capability offset */
 	struct aer_stats *aer_stats;	/* AER stats for this device */
+#endif
+#ifdef CONFIG_PCIEPORTBUS
+	struct pci_dev	*rcec;		/* Associated RCEC device */
 #endif
 	u8		pcie_cap;	/* PCIe capability offset */
 	u8		msi_cap;	/* MSI capability offset */