| Message ID | 20200731081836.3048-6-laurentiu.palcu@oss.nxp.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add support for iMX8MQ Display Controller Subsystem | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success |
Hi, On Fri, Jul 31, 2020 at 11:18:33AM +0300, Laurentiu Palcu wrote: > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > Add bindings for iMX8MQ Display Controller Subsystem. > > Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> > --- > Changes in v9: > * Include imx8mq-clock.h in the example so we can use clock names > instead of their values; Reviewed-by: Guido Günther <agx@sigxcpu.org> (and passed DT bindings check for me) -- Guido > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 ++++++++++++++++++ > 1 file changed, 108 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > new file mode 100644 > index 000000000000..f1f25aa794d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > @@ -0,0 +1,108 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 NXP > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: iMX8MQ Display Controller Subsystem (DCSS) > + > +maintainers: > + - Laurentiu Palcu <laurentiu.palcu@nxp.com> > + > +description: > + > + The DCSS (display controller sub system) is used to source up to three > + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP > + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 > + image processing capabilities are included to provide a solution capable of > + driving next generation high dynamic range displays. > + > +properties: > + compatible: > + const: nxp,imx8mq-dcss > + > + reg: > + items: > + - description: DCSS base address and size, up to IRQ steer start > + - description: DCSS BLKCTL base address and size > + > + interrupts: > + items: > + - description: Context loader completion and error interrupt > + - description: DTG interrupt used to signal context loader trigger time > + - description: DTG interrupt for Vblank > + > + interrupt-names: > + items: > + - const: ctxld > + - const: ctxld_kick > + - const: vblank > + > + clocks: > + items: > + - description: Display APB clock for all peripheral PIO access interfaces > + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL > + - description: RTRAM clock > + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI > + - description: DTRC clock, needed by video decompressor > + > + clock-names: > + items: > + - const: apb > + - const: axi > + - const: rtrm > + - const: pix > + - const: dtrc > + > + assigned-clocks: > + items: > + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT > + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM > + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or > + IMX8MQ_VIDEO_PLL1_REF_SEL > + > + assigned-clock-parents: > + items: > + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M > + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M > + - description: Phandle and clock specifier of IMX8MQ_CLK_27M > + > + assigned-clock-rates: > + items: > + - description: Must be 800 MHz > + - description: Must be 400 MHz > + > + port: > + type: object > + description: > + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8mq-clock.h> > + dcss: display-controller@32e00000 { > + compatible = "nxp,imx8mq-dcss"; > + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; > + interrupts = <6>, <8>, <9>; > + interrupt-names = "ctxld", "ctxld_kick", "vblank"; > + interrupt-parent = <&irqsteer>; > + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>, > + <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>, > + <&clk IMX8MQ_CLK_DISP_DTRC>; > + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; > + assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>, > + <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>; > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>, > + <&clk IMX8MQ_CLK_27M>; > + assigned-clock-rates = <800000000>, > + <400000000>; > + port { > + dcss_out: endpoint { > + remote-endpoint = <&hdmi_in>; > + }; > + }; > + }; > + > -- > 2.23.0 >
On Fri, 31 Jul 2020 11:18:33 +0300, Laurentiu Palcu wrote: > From: Laurentiu Palcu <laurentiu.palcu@nxp.com> > > Add bindings for iMX8MQ Display Controller Subsystem. > > Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> > --- > Changes in v9: > * Include imx8mq-clock.h in the example so we can use clock names > instead of their values; > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 ++++++++++++++++++ > 1 file changed, 108 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml new file mode 100644 index 000000000000..f1f25aa794d9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 NXP +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: iMX8MQ Display Controller Subsystem (DCSS) + +maintainers: + - Laurentiu Palcu <laurentiu.palcu@nxp.com> + +description: + + The DCSS (display controller sub system) is used to source up to three + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 + image processing capabilities are included to provide a solution capable of + driving next generation high dynamic range displays. + +properties: + compatible: + const: nxp,imx8mq-dcss + + reg: + items: + - description: DCSS base address and size, up to IRQ steer start + - description: DCSS BLKCTL base address and size + + interrupts: + items: + - description: Context loader completion and error interrupt + - description: DTG interrupt used to signal context loader trigger time + - description: DTG interrupt for Vblank + + interrupt-names: + items: + - const: ctxld + - const: ctxld_kick + - const: vblank + + clocks: + items: + - description: Display APB clock for all peripheral PIO access interfaces + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL + - description: RTRAM clock + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI + - description: DTRC clock, needed by video decompressor + + clock-names: + items: + - const: apb + - const: axi + - const: rtrm + - const: pix + - const: dtrc + + assigned-clocks: + items: + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or + IMX8MQ_VIDEO_PLL1_REF_SEL + + assigned-clock-parents: + items: + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_CLK_27M + + assigned-clock-rates: + items: + - description: Must be 800 MHz + - description: Must be 400 MHz + + port: + type: object + description: + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + dcss: display-controller@32e00000 { + compatible = "nxp,imx8mq-dcss"; + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; + interrupts = <6>, <8>, <9>; + interrupt-names = "ctxld", "ctxld_kick", "vblank"; + interrupt-parent = <&irqsteer>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>, + <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>, + <&clk IMX8MQ_CLK_DISP_DTRC>; + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; + assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>, + <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_CLK_27M>; + assigned-clock-rates = <800000000>, + <400000000>; + port { + dcss_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; +