mbox series

[v5,00/11] Add ASoC AHUB components for Tegra210 and later

Message ID 1595134890-16470-1-git-send-email-spujar@nvidia.com
Headers show
Series Add ASoC AHUB components for Tegra210 and later | expand

Message

Sameer Pujar July 19, 2020, 5:01 a.m. UTC
Overview
========
Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
pre-processing and post-processing. It also includes a programmable full
crossbar for routing audio data across these accelerators.

This series exposes some of these below mentioned HW devices as ASoC
components for Tegra platforms from Tegra210 onwards.
 * ADMAIF : The interface between ADMA and AHUB
 * XBAR   : Crossbar for routing audio samples across various modules
 * I2S    : Inter-IC Sound Controller
 * DMIC   : Digital Microphone
 * DSPK   : Digital Speaker

Following is the summary of current series.
 * Add YAML DT binding documentation for above mentioned modules.
 * Helper function for ACIF programming is exposed for Tegra210 and later.
 * Add ASoC driver components for each of the above modules.
 * Build ACONNECT and ADMA drivers which are essential to realize audio
   use case.
 * Add DT entries for above components for Tegra210, Tegra186 and
   Tegra194.

As per the suggestion in [0] audio graph based sound card support
is pushed in a separate series.

[0] https://lkml.org/lkml/2020/6/27/4

Changelog
=========

v4 -> v5
--------
 * Common changes
   - simple-card driver changes are dropped. Changes are migrated to audio
     graph card and are moved to a separate series as suggested.

   - '#sound-dai-cells' property is not needed for planned audio graph card
     Hence dropped from documentation and related DT binding of component
     drivers.

   - CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to
     represent DAI links using audio graph card. Similary DAIs are added in
     AHUB driver to describe endpoints in audio crossbar. Routing is updated
     to reflect the same in drivers.

v3 -> v4
--------
 * [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210"
   - Removed multiple examples and retained one example per doc
   - Fixed as per inputs on the previous series
   - Tested bindings with 'make dt_binding_check/dtbs_check'

 * [2/23] "ASoC: tegra: Add support for CIF programming"
   - No change

 * Common changes (for patch [3/10] to [7/10])
   - Mixer control overrides, for PCM parameters (rate, channel, bits),
     in each driver are dropped.
   - Updated routing as per DPCM usage
   - Minor changes related to formatting

 * New changes (patch [8/23] to [18/23] and patch [23/23])
   - Based on discussions in following threads DPCM is used for Tegra Audio.
     https://lkml.org/lkml/2020/2/20/91
     https://lkml.org/lkml/2020/4/30/519
   - The simple-card driver is used for Tegra Audio and accordingly
     some enhancements are made in simple-card and core drivers.
   - Patch [8/23] to [18/23] are related to simple-card and core changes.
   - Patch [23/23] adds sound card support to realize complete audio path.
     This is based on simple-card driver with proposed enhancements.
   - Re-ordered patches depending on above

v2 -> v3
--------
 * [1/10]  "dt-bindings: sound: tegra: add DT binding for AHUB
   - Updated licence
   - Removed redundancy w.r.t items/const/enum
   - Added constraints wherever needed with "pattern" property

 * [2/10]  "ASoC: tegra: add support for CIF programming"
   - Removed tegra_cif.c
   - Instead added inline helper function in tegra_cif.h

 * common changes (for patch [3/10] to [7/10])
   - Replace LATE system calls with Normal sleep
   - Remove explicit RPM suspend in driver remove() call
   - Use devm_kzalloc() instead of devm_kcalloc() for single element
   - Replace 'ret' with 'err' for better reading
   - Consistent error printing style across drivers
   - Minor formating fixes

 * [8/10]  "arm64: tegra: add AHUB components for few Tegra chips"
   - no change

 * [9/10]  "arm64: tegra: enable AHUB modules for few Tegra chips"
   - no change

 * [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later"
   (New patch)
   - Enables ACONNECT and AHUB components. With this AHUB and components are
     registered with ASoC core.

v1 -> v2
--------
 * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB"
   - no changes

 * [2/9] "ASoC: tegra: add support for CIF programming"
   - removed CIF programming changes for legacy chips.
   - this patch now exposes helper function for CIF programming,
     which can be used on Tegra210 later.
   - later tegra_cif.c can be extended for legacy chips as well.
   - updated commit message accordingly

 * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver"
   - removed unnecessary initialization of 'ret' in probe()

 * [4/9] "ASoC: tegra: add Tegra210 based I2S driver"
   - removed unnecessary initialization of 'ret' in probe()
   - fixed indentation
   - added consistent bracing for if-else clauses
   - updated 'rx_fifo_th' type to 'unsigned int'
   - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h

 * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver"
   - used of_device_get_match_data() to get 'soc_data' and removed
    explicit of_match_device()
   - used devm_platform_ioremap_resource() and removed explicit
    platform_get_resource()
   - fixed indentation for devm_snd_soc_register_component()
   - updated commit message
   - updated commit message to reflect compatible binding for Tegra186 and
     Tegra194.

 * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver"
   - removed unnecessary initialization of 'ret' in probe()
   - updated 'max_th' to 'unsigned int'
   - shortened lengthy macro names to avoid wrapping in
     tegra186_dspk_wr_reg() and to be consistent

 * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver"
   - used of_device_get_match_data() and removed explicit of_match_device()
   - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h
   - updated commit message to reflect compatible binding for Tegra186 and
     Tegra194.

 * [8/9] "arm64: tegra: add AHUB components for few Tegra chips"
   - no change

 * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips"
   - no change

 * common changes for patch [3/9] to [7/9]
   - sorted headers in alphabetical order
   - moved MODULE_DEVICE_TABLE() right below *_of_match table
   - removed macro DRV_NAME
   - removed explicit 'owner' field from platform_driver structure
   - added 'const' to snd_soc_dai_ops structure

Sameer Pujar (11):
  ASoC: dt-bindings: tegra: Add DT bindings for Tegra210
  ASoC: tegra: Add support for CIF programming
  ASoC: tegra: Add Tegra210 based DMIC driver
  ASoC: tegra: Add Tegra210 based I2S driver
  ASoC: tegra: Add Tegra210 based AHUB driver
  ASoC: tegra: Add Tegra186 based DSPK driver
  ASoC: tegra: Add Tegra210 based ADMAIF driver
  arm64: defconfig: Build AHUB component drivers
  arm64: defconfig: Build ADMA and ACONNECT driver
  arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
  arm64: tegra: Add DT binding for AHUB components

 .../bindings/sound/nvidia,tegra186-dspk.yaml       |  83 +++
 .../bindings/sound/nvidia,tegra210-admaif.yaml     | 111 +++
 .../bindings/sound/nvidia,tegra210-ahub.yaml       | 136 ++++
 .../bindings/sound/nvidia,tegra210-dmic.yaml       |  83 +++
 .../bindings/sound/nvidia,tegra210-i2s.yaml        | 101 +++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 217 +++++-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           | 225 +++++-
 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts |  12 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           | 140 ++++
 arch/arm64/configs/defconfig                       |   8 +
 sound/soc/tegra/Kconfig                            |  56 ++
 sound/soc/tegra/Makefile                           |  10 +
 sound/soc/tegra/tegra186_dspk.c                    | 442 +++++++++++
 sound/soc/tegra/tegra186_dspk.h                    |  70 ++
 sound/soc/tegra/tegra210_admaif.c                  | 800 ++++++++++++++++++++
 sound/soc/tegra/tegra210_admaif.h                  | 162 ++++
 sound/soc/tegra/tegra210_ahub.c                    | 676 +++++++++++++++++
 sound/soc/tegra/tegra210_ahub.h                    | 127 ++++
 sound/soc/tegra/tegra210_dmic.c                    | 455 ++++++++++++
 sound/soc/tegra/tegra210_dmic.h                    |  82 +++
 sound/soc/tegra/tegra210_i2s.c                     | 812 +++++++++++++++++++++
 sound/soc/tegra/tegra210_i2s.h                     | 126 ++++
 sound/soc/tegra/tegra_cif.h                        |  65 ++
 sound/soc/tegra/tegra_pcm.c                        | 235 +++++-
 sound/soc/tegra/tegra_pcm.h                        |  21 +-
 25 files changed, 5251 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
 create mode 100644 sound/soc/tegra/tegra186_dspk.c
 create mode 100644 sound/soc/tegra/tegra186_dspk.h
 create mode 100644 sound/soc/tegra/tegra210_admaif.c
 create mode 100644 sound/soc/tegra/tegra210_admaif.h
 create mode 100644 sound/soc/tegra/tegra210_ahub.c
 create mode 100644 sound/soc/tegra/tegra210_ahub.h
 create mode 100644 sound/soc/tegra/tegra210_dmic.c
 create mode 100644 sound/soc/tegra/tegra210_dmic.h
 create mode 100644 sound/soc/tegra/tegra210_i2s.c
 create mode 100644 sound/soc/tegra/tegra210_i2s.h
 create mode 100644 sound/soc/tegra/tegra_cif.h

Comments

Mark Brown July 20, 2020, 2:38 p.m. UTC | #1
On Sun, 19 Jul 2020 10:31:19 +0530, Sameer Pujar wrote:
> Overview
> ========
> Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
> Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
> pre-processing and post-processing. It also includes a programmable full
> crossbar for routing audio data across these accelerators.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/6] ASoC: dt-bindings: tegra: Add DT bindings for Tegra210
      commit: 665308c0b44a37339b9b3368f1dd61eb66acde87
[2/6] ASoC: tegra: Add support for CIF programming
      commit: 1c3b89fb7e4a78ddcd627e3f218a216e2136ae9b
[3/6] ASoC: tegra: Add Tegra210 based DMIC driver
      commit: 8c8ff982e9e2b2eb9255fc393f938915b0ddc127
[4/6] ASoC: tegra: Add Tegra210 based I2S driver
      commit: c0bfa98349d1796fe754dfac7f7f505bb60dcd83
[5/6] ASoC: tegra: Add Tegra210 based AHUB driver
      commit: 16e1bcc2caf446fa3e1daa040b59fd6f6272a766
[6/6] ASoC: tegra: Add Tegra186 based DSPK driver
      commit: 327ef64702668bb754eeea80ce402454d7a1302a

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
Sameer Pujar July 21, 2020, 11:52 a.m. UTC | #2
Hi Mark,

On 7/20/2020 8:08 PM, Mark Brown wrote:
> External email: Use caution opening links or attachments
>
>
> On Sun, 19 Jul 2020 10:31:19 +0530, Sameer Pujar wrote:
>> Overview
>> ========
>> Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
>> Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
>> pre-processing and post-processing. It also includes a programmable full
>> crossbar for routing audio data across these accelerators.
>>
>> [...]
> Applied to
>
>     https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
>
> Thanks!
>
> [1/6] ASoC: dt-bindings: tegra: Add DT bindings for Tegra210
>        commit: 665308c0b44a37339b9b3368f1dd61eb66acde87
> [2/6] ASoC: tegra: Add support for CIF programming
>        commit: 1c3b89fb7e4a78ddcd627e3f218a216e2136ae9b
> [3/6] ASoC: tegra: Add Tegra210 based DMIC driver
>        commit: 8c8ff982e9e2b2eb9255fc393f938915b0ddc127
> [4/6] ASoC: tegra: Add Tegra210 based I2S driver
>        commit: c0bfa98349d1796fe754dfac7f7f505bb60dcd83
> [5/6] ASoC: tegra: Add Tegra210 based AHUB driver
>        commit: 16e1bcc2caf446fa3e1daa040b59fd6f6272a766
> [6/6] ASoC: tegra: Add Tegra186 based DSPK driver
>        commit: 327ef64702668bb754eeea80ce402454d7a1302a

I see that "[PATCH v5 07/11] ASoC: tegra: Add Tegra210 based ADMAIF 
driver" is not applied as part of this. I wanted to understand if this 
is because some more review comments are expected or there are other 
reasons?

Thanks,
Sameer.

>
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
>
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
>
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
>
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
>
> Thanks,
> Mark
Mark Brown July 21, 2020, 10:41 p.m. UTC | #3
On Tue, Jul 21, 2020 at 05:22:35PM +0530, Sameer Pujar wrote:

> I see that "[PATCH v5 07/11] ASoC: tegra: Add Tegra210 based ADMAIF driver"
> is not applied as part of this. I wanted to understand if this is because
> some more review comments are expected or there are other reasons?

I just hadn't got that far through the patch series yet, looks fine.
Mark Brown July 22, 2020, 12:56 a.m. UTC | #4
On Sun, 19 Jul 2020 10:31:19 +0530, Sameer Pujar wrote:
> Overview
> ========
> Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
> Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
> pre-processing and post-processing. It also includes a programmable full
> crossbar for routing audio data across these accelerators.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: tegra: Add Tegra210 based ADMAIF driver
      commit: f74028e159bb8e1de840d945af344bf93b59ada2

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark