Message ID | 1573572263-14308-1-git-send-email-eugen.hristev@microchip.com |
---|---|
State | Accepted |
Headers | show |
Series | [v2] configs/microchip: addition of the sama5d27 wlsom1 ek board | expand |
On 12.11.2019 17:24, Eugen Hristev - M18282 wrote: > From: Eugen Hristev <eugen.hristev@microchip.com> > > Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2 components. > Update README file with new defconfigs and new packages/website > > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> > --- > Changes in v2: > - added minimal (non-dev) defconfig > - changed README to accomodate > - added defconfigs to DEVELOPERS > - changed u-boot and at91bootstrap to use of tarballs instead of git clone > - Thanks Thomas for review Hi Thomas, Any more changes needed for this board ? Thanks ! Eugen > > DEVELOPERS | 1 + > board/atmel/readme.txt | 22 ++--- > .../atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg | 31 +++++++ > ...microchip_sama5d27_wlsom1_ek_mmc_defconfig | 30 +++++++ > ...ochip_sama5d27_wlsom1_ek_mmc_dev_defconfig | 85 +++++++++++++++++++ > 5 files changed, 159 insertions(+), 10 deletions(-) > create mode 100644 board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg > create mode 100644 configs/microchip_sama5d27_wlsom1_ek_mmc_defconfig > create mode 100644 configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig > > diff --git a/DEVELOPERS b/DEVELOPERS > index ad73370f02..a2d441b076 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1419,6 +1419,7 @@ N: Ludovic Desroches <ludovic.desroches@microchip.com> > F: board/atmel/ > F: configs/at91* > F: configs/atmel_* > +F: configs/microchip_* > F: package/fb-test-app/ > F: package/python-json-schema-validator/ > F: package/python-keyring/ > diff --git a/board/atmel/readme.txt b/board/atmel/readme.txt > index 4f90e4b4cc..6b76247288 100644 > --- a/board/atmel/readme.txt > +++ b/board/atmel/readme.txt > @@ -1,6 +1,6 @@ > This document explains how to set up a basic Buildroot system on various > -Atmel boards. Additional details can also be found on the Linux4SAM website: > -http://www.at91.com/linux4sam/bin/view/Linux4SAM/ > +Atmel/Microchip boards. Additional details can also be found on the Linux4SAM website: > +http://www.linux4sam.org > > This guide covers the following configurations: > - at91sam9g45m10ek_defconfig > @@ -19,6 +19,8 @@ This guide covers the following configurations: > - atmel_sama5d4_xplained_mmc_dev_defconfig > - atmel_sama5d2_xplained_mmc_defconfig > - atmel_sama5d2_xplained_mmc_dev_defconfig > + - microchip_sama5d27_wlsom1_ek_mmc_defconfig > + - microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig > > These configurations will use AT91Bootstrap, u-boot and a linux kernel from > the git trees maintained by Atmel. > @@ -29,23 +31,23 @@ tests the features of the SoC: > - FFMPEG to record video from the ISI/ISC > - I2C, SPI, CAN, etc. tools > - modetest for LCD screens, HDMI > -- Wilc1000 firmware for the Atmel Wireless sdio module > +- Wilc1000/Wilc3000 firmware for the Atmel Wireless sdio module > - SSH for convenience > - GDB/GDB server for debug > > Configuring and building Buildroot > ================================== > > -For most configurations listed above, the Buildroot configuration > -assumes the system will be flashed on NAND. In this case, after > -building Buildroot, follow the instructions in the "Flashing the NAND > -using SAM-BA" section below. > - > -For the Xplained boards, an alternative Buildroot configuration is > +For the Xplained/Evaluation Kit boards, the Buildroot configuration is > provided to boot from an SD card. Those configurations are labeled as > 'mmc'. In this case, after building Buildroot, follow the instructions > in the "Preparing the SD card" section. > > +For the other configurations listed above, the Buildroot configuration > +assumes the system will be flashed on NAND. In this case, after > +building Buildroot, follow the instructions in the "Flashing the NAND > +using SAM-BA" section below. > + > To configure and build Buildroot, run: > > make <board>_defconfig > @@ -144,7 +146,7 @@ lost. To copy the image on the SD card: > > dd if=output/images/sdcard.img of=/dev/mmcblk0 > > -Insert your SD card in your Xplained board, and enjoy. The default > +Insert your SD card in your Xplained/Evaluation Kit board, and enjoy. The default > U-Boot environment will load properly the kernel and Device Tree blob > from the first partition of the SD card, so everything works > automatically. > diff --git a/board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg b/board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg > new file mode 100644 > index 0000000000..dce32524e9 > --- /dev/null > +++ b/board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg > @@ -0,0 +1,31 @@ > +# Image for SD card boot on Microchip SAMA5D27 WLSOM1 EK > +# > +image boot.vfat { > + vfat { > + files = { > + "zImage", > + "at91-sama5d27_wlsom1_ek.dtb", > + "boot.bin", > + "u-boot.bin" > + } > + } > + size = 16M > +} > + > +image sdcard.img { > + hdimage { > + } > + > + partition boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + offset = 1M > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + size = 512M > + } > +} > diff --git a/configs/microchip_sama5d27_wlsom1_ek_mmc_defconfig b/configs/microchip_sama5d27_wlsom1_ek_mmc_defconfig > new file mode 100644 > index 0000000000..3bba4f6e3a > --- /dev/null > +++ b/configs/microchip_sama5d27_wlsom1_ek_mmc_defconfig > @@ -0,0 +1,30 @@ > +BR2_arm=y > +BR2_cortex_a5=y > +BR2_ARM_ENABLE_NEON=y > +BR2_ARM_ENABLE_VFP=y > +BR2_ARM_INSTRUCTIONS_THUMB2=y > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.2)/linux-linux4sam_6.2.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="sama5" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_wlsom1_ek" > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_AT91BOOTSTRAP3=y > +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y > +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v3.9.0)/at91bootstrap-v3.9.0.tar.gz" > +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_wlsom1_eksd_uboot" > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_wlsom1_ek_mmc" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y > diff --git a/configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig b/configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig > new file mode 100644 > index 0000000000..200b365353 > --- /dev/null > +++ b/configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig > @@ -0,0 +1,85 @@ > +BR2_arm=y > +BR2_cortex_a5=y > +BR2_ARM_ENABLE_NEON=y > +BR2_ARM_ENABLE_VFP=y > +BR2_ARM_INSTRUCTIONS_THUMB2=y > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y > +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y > +BR2_PTHREAD_DEBUG=y > +BR2_TOOLCHAIN_BUILDROOT_CXX=y > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.2)/linux-linux4sam_6.2.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="sama5" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_wlsom1_ek" > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y > +BR2_PACKAGE_ALSA_UTILS=y > +BR2_PACKAGE_ALSA_UTILS_ALSACONF=y > +BR2_PACKAGE_ALSA_UTILS_APLAY=y > +BR2_PACKAGE_FFMPEG=y > +BR2_PACKAGE_FFMPEG_GPL=y > +BR2_PACKAGE_FFMPEG_SWSCALE=y > +BR2_PACKAGE_MPG123=y > +BR2_PACKAGE_BZIP2=y > +BR2_PACKAGE_GZIP=y > +BR2_PACKAGE_UNZIP=y > +BR2_PACKAGE_XZ=y > +BR2_PACKAGE_ZIP=y > +BR2_PACKAGE_GDB=y > +BR2_PACKAGE_LMBENCH=y > +BR2_PACKAGE_DOSFSTOOLS=y > +BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y > +BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y > +BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y > +BR2_PACKAGE_MMC_UTILS=y > +BR2_PACKAGE_MTD=y > +BR2_PACKAGE_WILC1000_FIRMWARE=y > +BR2_PACKAGE_EVTEST=y > +BR2_PACKAGE_I2C_TOOLS=y > +BR2_PACKAGE_SETSERIAL=y > +BR2_PACKAGE_SPI_TOOLS=y > +BR2_PACKAGE_USBUTILS=y > +BR2_PACKAGE_LIBSYSFS=y > +BR2_PACKAGE_LIBDRM=y > +BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y > +BR2_PACKAGE_DTC=y > +BR2_PACKAGE_DTC_PROGRAMS=y > +BR2_PACKAGE_ARGP_STANDALONE=y > +BR2_PACKAGE_BLUEZ_UTILS=y > +BR2_PACKAGE_BRIDGE_UTILS=y > +BR2_PACKAGE_CAN_UTILS=y > +BR2_PACKAGE_ETHTOOL=y > +BR2_PACKAGE_IPERF=y > +BR2_PACKAGE_IPROUTE2=y > +BR2_PACKAGE_IPTABLES=y > +BR2_PACKAGE_IW=y > +BR2_PACKAGE_LRZSZ=y > +BR2_PACKAGE_MII_DIAG=y > +BR2_PACKAGE_OPENSSH=y > +BR2_PACKAGE_WGET=y > +BR2_PACKAGE_WIRELESS_TOOLS=y > +BR2_PACKAGE_WPA_SUPPLICANT=y > +BR2_PACKAGE_BASH=y > +BR2_PACKAGE_HTOP=y > +BR2_PACKAGE_VIM=y > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > +BR2_TARGET_AT91BOOTSTRAP3=y > +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y > +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v3.9.0)/at91bootstrap-v3.9.0.tar.gz" > +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_wlsom1_eksd_uboot" > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_wlsom1_ek_mmc" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y >
On Tue, 12 Nov 2019 15:24:33 +0000 <Eugen.Hristev@microchip.com> wrote: > From: Eugen Hristev <eugen.hristev@microchip.com> > > Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2 components. > Update README file with new defconfigs and new packages/website > > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> > --- > Changes in v2: > - added minimal (non-dev) defconfig > - changed README to accomodate > - added defconfigs to DEVELOPERS > - changed u-boot and at91bootstrap to use of tarballs instead of git clone > - Thanks Thomas for review Applied to master, thanks. Thomas
diff --git a/DEVELOPERS b/DEVELOPERS index ad73370f02..a2d441b076 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1419,6 +1419,7 @@ N: Ludovic Desroches <ludovic.desroches@microchip.com> F: board/atmel/ F: configs/at91* F: configs/atmel_* +F: configs/microchip_* F: package/fb-test-app/ F: package/python-json-schema-validator/ F: package/python-keyring/ diff --git a/board/atmel/readme.txt b/board/atmel/readme.txt index 4f90e4b4cc..6b76247288 100644 --- a/board/atmel/readme.txt +++ b/board/atmel/readme.txt @@ -1,6 +1,6 @@ This document explains how to set up a basic Buildroot system on various -Atmel boards. Additional details can also be found on the Linux4SAM website: -http://www.at91.com/linux4sam/bin/view/Linux4SAM/ +Atmel/Microchip boards. Additional details can also be found on the Linux4SAM website: +http://www.linux4sam.org This guide covers the following configurations: - at91sam9g45m10ek_defconfig @@ -19,6 +19,8 @@ This guide covers the following configurations: - atmel_sama5d4_xplained_mmc_dev_defconfig - atmel_sama5d2_xplained_mmc_defconfig - atmel_sama5d2_xplained_mmc_dev_defconfig + - microchip_sama5d27_wlsom1_ek_mmc_defconfig + - microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig These configurations will use AT91Bootstrap, u-boot and a linux kernel from the git trees maintained by Atmel. @@ -29,23 +31,23 @@ tests the features of the SoC: - FFMPEG to record video from the ISI/ISC - I2C, SPI, CAN, etc. tools - modetest for LCD screens, HDMI -- Wilc1000 firmware for the Atmel Wireless sdio module +- Wilc1000/Wilc3000 firmware for the Atmel Wireless sdio module - SSH for convenience - GDB/GDB server for debug Configuring and building Buildroot ================================== -For most configurations listed above, the Buildroot configuration -assumes the system will be flashed on NAND. In this case, after -building Buildroot, follow the instructions in the "Flashing the NAND -using SAM-BA" section below. - -For the Xplained boards, an alternative Buildroot configuration is +For the Xplained/Evaluation Kit boards, the Buildroot configuration is provided to boot from an SD card. Those configurations are labeled as 'mmc'. In this case, after building Buildroot, follow the instructions in the "Preparing the SD card" section. +For the other configurations listed above, the Buildroot configuration +assumes the system will be flashed on NAND. In this case, after +building Buildroot, follow the instructions in the "Flashing the NAND +using SAM-BA" section below. + To configure and build Buildroot, run: make <board>_defconfig @@ -144,7 +146,7 @@ lost. To copy the image on the SD card: dd if=output/images/sdcard.img of=/dev/mmcblk0 -Insert your SD card in your Xplained board, and enjoy. The default +Insert your SD card in your Xplained/Evaluation Kit board, and enjoy. The default U-Boot environment will load properly the kernel and Device Tree blob from the first partition of the SD card, so everything works automatically. diff --git a/board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg b/board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg new file mode 100644 index 0000000000..dce32524e9 --- /dev/null +++ b/board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg @@ -0,0 +1,31 @@ +# Image for SD card boot on Microchip SAMA5D27 WLSOM1 EK +# +image boot.vfat { + vfat { + files = { + "zImage", + "at91-sama5d27_wlsom1_ek.dtb", + "boot.bin", + "u-boot.bin" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 1M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/configs/microchip_sama5d27_wlsom1_ek_mmc_defconfig b/configs/microchip_sama5d27_wlsom1_ek_mmc_defconfig new file mode 100644 index 0000000000..3bba4f6e3a --- /dev/null +++ b/configs/microchip_sama5d27_wlsom1_ek_mmc_defconfig @@ -0,0 +1,30 @@ +BR2_arm=y +BR2_cortex_a5=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_INSTRUCTIONS_THUMB2=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.2)/linux-linux4sam_6.2.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="sama5" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_wlsom1_ek" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_AT91BOOTSTRAP3=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v3.9.0)/at91bootstrap-v3.9.0.tar.gz" +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_wlsom1_eksd_uboot" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_wlsom1_ek_mmc" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig b/configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig new file mode 100644 index 0000000000..200b365353 --- /dev/null +++ b/configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig @@ -0,0 +1,85 @@ +BR2_arm=y +BR2_cortex_a5=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_INSTRUCTIONS_THUMB2=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y +BR2_PTHREAD_DEBUG=y +BR2_TOOLCHAIN_BUILDROOT_CXX=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.2)/linux-linux4sam_6.2.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="sama5" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_wlsom1_ek" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y +BR2_PACKAGE_ALSA_UTILS=y +BR2_PACKAGE_ALSA_UTILS_ALSACONF=y +BR2_PACKAGE_ALSA_UTILS_APLAY=y +BR2_PACKAGE_FFMPEG=y +BR2_PACKAGE_FFMPEG_GPL=y +BR2_PACKAGE_FFMPEG_SWSCALE=y +BR2_PACKAGE_MPG123=y +BR2_PACKAGE_BZIP2=y +BR2_PACKAGE_GZIP=y +BR2_PACKAGE_UNZIP=y +BR2_PACKAGE_XZ=y +BR2_PACKAGE_ZIP=y +BR2_PACKAGE_GDB=y +BR2_PACKAGE_LMBENCH=y +BR2_PACKAGE_DOSFSTOOLS=y +BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y +BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y +BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y +BR2_PACKAGE_MMC_UTILS=y +BR2_PACKAGE_MTD=y +BR2_PACKAGE_WILC1000_FIRMWARE=y +BR2_PACKAGE_EVTEST=y +BR2_PACKAGE_I2C_TOOLS=y +BR2_PACKAGE_SETSERIAL=y +BR2_PACKAGE_SPI_TOOLS=y +BR2_PACKAGE_USBUTILS=y +BR2_PACKAGE_LIBSYSFS=y +BR2_PACKAGE_LIBDRM=y +BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y +BR2_PACKAGE_DTC=y +BR2_PACKAGE_DTC_PROGRAMS=y +BR2_PACKAGE_ARGP_STANDALONE=y +BR2_PACKAGE_BLUEZ_UTILS=y +BR2_PACKAGE_BRIDGE_UTILS=y +BR2_PACKAGE_CAN_UTILS=y +BR2_PACKAGE_ETHTOOL=y +BR2_PACKAGE_IPERF=y +BR2_PACKAGE_IPROUTE2=y +BR2_PACKAGE_IPTABLES=y +BR2_PACKAGE_IW=y +BR2_PACKAGE_LRZSZ=y +BR2_PACKAGE_MII_DIAG=y +BR2_PACKAGE_OPENSSH=y +BR2_PACKAGE_WGET=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_BASH=y +BR2_PACKAGE_HTOP=y +BR2_PACKAGE_VIM=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_AT91BOOTSTRAP3=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v3.9.0)/at91bootstrap-v3.9.0.tar.gz" +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_wlsom1_eksd_uboot" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_6.2)/u-boot-at91-linux4sam_6.2.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_wlsom1_ek_mmc" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y