@@ -25,4 +25,4 @@ Optional properties:
a bug workaround is activated.
For further information look in the documentation for the GLIB IP core library:
-http://www.gaisler.com/products/grlib/grip.pdf
+https://www.gaisler.com/products/grlib/grip.pdf
@@ -8,7 +8,7 @@
* VHDL IP core library.
*
* Full documentation of the GRCAN core can be found here:
- * http://www.gaisler.com/products/grlib/grip.pdf
+ * https://www.gaisler.com/products/grlib/grip.pdf
*
* See "Documentation/devicetree/bindings/net/can/grcan.txt" for information on
* open firmware properties.
@@ -2,7 +2,7 @@
// CAN bus driver for Bosch M_CAN controller
// Copyright (C) 2014 Freescale Semiconductor, Inc.
// Dong Aisheng <b29396@freescale.com>
-// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
+// Copyright (C) 2018-19 Texas Instruments Incorporated - https://www.ti.com/
/* Bosch M_CAN user manual can be obtained from:
* http://www.bosch-semiconductors.de/media/pdf_1/ipmodules_1/m_can/
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* CAN bus driver for Bosch M_CAN controller
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef _CAN_M_CAN_H_
@@ -3,7 +3,7 @@
// Copyright (C) 2014 Freescale Semiconductor, Inc.
// Dong Aisheng <b29396@freescale.com>
//
-// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
+// Copyright (C) 2018-19 Texas Instruments Incorporated - https://www.ti.com/
#include <linux/platform_device.h>
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
// SPI to CAN driver for the Texas Instruments TCAN4x5x
-// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
+// Copyright (C) 2018-19 Texas Instruments Incorporated - https://www.ti.com/
#include <linux/regmap.h>
#include <linux/spi/spi.h>
@@ -12,14 +12,14 @@ config CAN_EMS_PCI
help
This driver is for the one, two or four channel CPC-PCI,
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
- (http://www.ems-wuensche.de).
+ (https://www.ems-wuensche.de).
config CAN_EMS_PCMCIA
tristate "EMS CPC-CARD Card"
depends on PCMCIA
help
This driver is for the one or two channel CPC-CARD cards from
- EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+ EMS Dr. Thomas Wuensche (https://www.ems-wuensche.de).
config CAN_F81601
tristate "Fintek F81601 PCIE to 2 CAN Controller"
@@ -44,7 +44,7 @@ config CAN_PEAK_PCI
help
This driver is for the PCAN-PCI/PCIe/miniPCI cards
(1, 2, 3 or 4 channels) from PEAK-System Technik
- (http://www.peak-system.com).
+ (https://www.peak-system.com).
config CAN_PEAK_PCIEC
bool "PEAK PCAN-ExpressCard Cards"
@@ -63,7 +63,7 @@ config CAN_PEAK_PCMCIA
depends on HAS_IOPORT_MAP
help
This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
- from PEAK-System (http://www.peak-system.com). To compile this
+ from PEAK-System (https://www.peak-system.com). To compile this
driver as a module, choose M here: the module will be called
peak_pcmcia.
@@ -97,7 +97,7 @@ config CAN_SJA1000_PLATFORM
This driver adds support for the SJA1000 chips connected to
the "platform bus" (Linux abstraction for directly to the
processor attached devices). Which can be found on various
- boards from Phytec (http://www.phytec.de) like the PCM027,
+ boards from Phytec (https://www.phytec.de) like the PCM027,
PCM038. It also provides the OpenFirmware "platform bus" found
on embedded systems with OpenFirmware bindings, e.g. if you
have a PowerPC based system you may want to enable this option.
@@ -107,7 +107,7 @@ config CAN_TSCAN1
depends on ISA
help
This driver is for Technologic Systems' TSCAN-1 PC104 boards.
- http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
+ https://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
The driver supports multiple boards and automatically configures them:
PLD IO base addresses are read from jumpers JP1 and JP2,
IRQ numbers are read from jumpers JP4 and JP5,
@@ -8,7 +8,7 @@
/*
* References:
* - Getting started with TS-CAN1, Technologic Systems, Jun 2009
- * http://www.embeddedarm.com/documentation/ts-can1-manual.pdf
+ * https://www.embeddedarm.com/documentation/ts-can1-manual.pdf
*/
#include <linux/init.h>
@@ -18,7 +18,7 @@
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
- * with this program; if not, see http://www.gnu.org/licenses/gpl.html
+ * with this program; if not, see https://www.gnu.org/licenses/gpl.html
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
@@ -2,9 +2,9 @@
* TI HECC (CAN) device driver
*
* This driver supports TI's HECC (High End CAN Controller module) and the
- * specs for the same is available at <http://www.ti.com>
+ * specs for the same is available at <https://www.ti.com>
*
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
* Copyright (C) 2019 Jeroen Hofstee <jhofstee@victronenergy.com>
*
* This program is free software; you can redistribute it and/or
@@ -6,13 +6,13 @@ config CAN_8DEV_USB
tristate "8 devices USB2CAN interface"
help
This driver supports the USB2CAN interface
- from 8 devices (http://www.8devices.com).
+ from 8 devices (https://www.8devices.com).
config CAN_EMS_USB
tristate "EMS CPC-USB/ARM7 CAN/USB interface"
help
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
- from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+ from EMS Dr. Thomas Wuensche (https://www.ems-wuensche.de).
config CAN_ESD_USB2
tristate "ESD USB/2 CAN/USB interface"
@@ -100,7 +100,7 @@ config CAN_PEAK_USB
PCAN-Chip USB CAN-FD to USB stamp module
PCAN-USB X6 6 CAN-FD channels USB adapter
- (see also http://www.peak-system.com).
+ (see also https://www.peak-system.com).
config CAN_UCAN
tristate "Theobroma Systems UCAN interface"
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> --- Continuing my work started at 93431e0607e5. If there are any URLs to be removed completely or at least not HTTPSified: Just clearly say so and I'll *undo my change*. See also https://lkml.org/lkml/2020/6/27/64 If there are any valid, but yet not changed URLs: See https://lkml.org/lkml/2020/6/26/837 Documentation/devicetree/bindings/net/can/grcan.txt | 2 +- drivers/net/can/grcan.c | 2 +- drivers/net/can/m_can/m_can.c | 2 +- drivers/net/can/m_can/m_can.h | 2 +- drivers/net/can/m_can/m_can_platform.c | 2 +- drivers/net/can/m_can/tcan4x5x.c | 2 +- drivers/net/can/sja1000/Kconfig | 12 ++++++------ drivers/net/can/sja1000/tscan1.c | 2 +- drivers/net/can/slcan.c | 2 +- drivers/net/can/ti_hecc.c | 4 ++-- drivers/net/can/usb/Kconfig | 6 +++--- 11 files changed, 19 insertions(+), 19 deletions(-)