| Message ID | 20200612171334.26385-6-nsaenzjulienne@suse.de |
|---|---|
| State | New |
| Headers | show |
| Series | Raspberry Pi 4 USB firmware initialization rework | expand |
On 6/12/2020 10:13 AM, Nicolas Saenz Julienne wrote: > Some atypical users of xhci-pci might need to manually reset their xHCI > controller before starting the HCD setup. Check if a reset controller > device is available to the PCI bus and trigger a reset. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
On 12.6.2020 20.13, Nicolas Saenz Julienne wrote: > Some atypical users of xhci-pci might need to manually reset their xHCI > controller before starting the HCD setup. Check if a reset controller > device is available to the PCI bus and trigger a reset. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
On Fri, 2020-06-12 at 19:13 +0200, Nicolas Saenz Julienne wrote: > Some atypical users of xhci-pci might need to manually reset their xHCI > controller before starting the HCD setup. Check if a reset controller > device is available to the PCI bus and trigger a reset. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- > > Changes since v2: > - Also reset on resume > > Changes since v1: > - Use proper reset API > - Make code simpler > > drivers/usb/host/xhci-pci.c | 10 ++++++++++ > drivers/usb/host/xhci.h | 2 ++ > 2 files changed, 12 insertions(+) > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c > index ef513c2fb843..e76b9283faa3 100644 > --- a/drivers/usb/host/xhci-pci.c > +++ b/drivers/usb/host/xhci-pci.c > @@ -12,6 +12,7 @@ > #include <linux/slab.h> > #include <linux/module.h> > #include <linux/acpi.h> > +#include <linux/reset.h> > > #include "xhci.h" > #include "xhci-trace.h" > @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) > struct xhci_hcd *xhci; > struct usb_hcd *hcd; > struct xhci_driver_data *driver_data; > + struct reset_control *reset; > > driver_data = (struct xhci_driver_data *)id->driver_data; > if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { > @@ -347,6 +349,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) > return retval; > } > > + reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL); > + if (IS_ERR(reset)) > + return PTR_ERR(reset); > + reset_control_reset(reset); Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef513c2fb843..e76b9283faa3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/acpi.h> +#include <linux/reset.h> #include "xhci.h" #include "xhci-trace.h" @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct xhci_hcd *xhci; struct usb_hcd *hcd; struct xhci_driver_data *driver_data; + struct reset_control *reset; driver_data = (struct xhci_driver_data *)id->driver_data; if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { @@ -347,6 +349,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; } + reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL); + if (IS_ERR(reset)) + return PTR_ERR(reset); + reset_control_reset(reset); + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev); @@ -364,6 +371,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* USB 2.0 roothub is stored in the PCI device now. */ hcd = dev_get_drvdata(&dev->dev); xhci = hcd_to_xhci(hcd); + xhci->reset = reset; xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev, pci_name(dev), hcd); if (!xhci->shared_hcd) { @@ -515,6 +523,8 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = 0; + reset_control_reset(xhci->reset); + /* The BIOS on systems with the Intel Panther Point chipset may or may * not support xHCI natively. That means that during system resume, it * may switch the ports back to EHCI so that users can use their diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 2c6c4f8d1ee1..379ffa24877d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1770,6 +1770,8 @@ struct xhci_hcd { /* optional clocks */ struct clk *clk; struct clk *reg_clk; + /* optional reset controller */ + struct reset_control *reset; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring;
Some atypical users of xhci-pci might need to manually reset their xHCI controller before starting the HCD setup. Check if a reset controller device is available to the PCI bus and trigger a reset. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- Changes since v2: - Also reset on resume Changes since v1: - Use proper reset API - Make code simpler drivers/usb/host/xhci-pci.c | 10 ++++++++++ drivers/usb/host/xhci.h | 2 ++ 2 files changed, 12 insertions(+)