diff mbox series

hw/misc/imx6ul_ccm.c: Implement non writable bits in CCM registers

Message ID 20200529180005.169036-1-jcd@tribudubois.net
State New
Headers show
Series hw/misc/imx6ul_ccm.c: Implement non writable bits in CCM registers | expand

Commit Message

Jean-Christophe Dubois May 29, 2020, 6 p.m. UTC 
Some bits of the CCM registers are non writable.

This was left undone in the initial commit (all bits of registers were
writable).

This patch add the required code to protect non writable bits.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
---
 hw/misc/imx6ul_ccm.c | 81 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 68 insertions(+), 13 deletions(-)

Comments

Peter Maydell June 5, 2020, 2:49 p.m. UTC | #1 
On Fri, 29 May 2020 at 19:00, Jean-Christophe Dubois
<jcd@tribudubois.net> wrote:
>
> Some bits of the CCM registers are non writable.
>
> This was left undone in the initial commit (all bits of registers were
> writable).
>
> This patch add the required code to protect non writable bits.
>
> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
>  static uint64_t imx6ul_analog_read(void *opaque, hwaddr offset, unsigned size)
> @@ -737,7 +790,8 @@ static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value,
>           * the REG_NAME register. So we change the value of the
>           * REG_NAME register, setting bits passed in the value.
>           */
> -        s->analog[index - 1] |= value;
> +        s->analog[index - 1] = s->analog[index - 1] |
> +                               (value & ~analog_mask[index - 1]);

Not sure why you didn't retain the use of the |= operator here?

>          break;
>      case CCM_ANALOG_PLL_ARM_CLR:
>      case CCM_ANALOG_PLL_USB1_CLR:
> @@ -762,7 +816,8 @@ static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value,
>           * the REG_NAME register. So we change the value of the
>           * REG_NAME register, unsetting bits passed in the value.
>           */
> -        s->analog[index - 2] &= ~value;
> +        s->analog[index - 2] = s->analog[index - 2] &
> +                               ~(value & ~analog_mask[index - 2]);

Similarly here with &=.

>          break;
>      case CCM_ANALOG_PLL_ARM_TOG:
>      case CCM_ANALOG_PLL_USB1_TOG:
> @@ -787,14 +842,14 @@ static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value,
>           * the REG_NAME register. So we change the value of the
>           * REG_NAME register, toggling bits passed in the value.
>           */
> -        s->analog[index - 3] ^= value;
> +        s->analog[index - 3] = (s->analog[index - 3] &
> +                                analog_mask[index - 3]) |
> +                               ((value ^ s->analog[index - 3]) &
> +                                ~analog_mask[index - 3]);

I think this does the right thing (toggle bits which are set in
value as long as they're not read-only), but isn't this a simpler
way to write it?

     s->analog[index - 3] ^= (value & ~analog_mask[index - 3]);

That is, we toggle the bits that are set in 'value' and not set
in the mask of read-only bits.

>          break;
>      default:
> -        /*
> -         * We will do a better implementation later. In particular some bits
> -         * cannot be written to.
> -         */
> -        s->analog[index] = value;
> +        s->analog[index] = (s->analog[index] & analog_mask[index]) |
> +                           (value & ~analog_mask[index]);
>          break;
>      }
>  }

thanks
-- PMM
diff mbox series

Patch

diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c
index a2fc1d0364a..ede845fde8e 100644
--- a/hw/misc/imx6ul_ccm.c
+++ b/hw/misc/imx6ul_ccm.c
@@ -19,6 +19,62 @@ 
 
 #include "trace.h"
 
+static const uint32_t ccm_mask[CCM_MAX] = {
+    [CCM_CCR] = 0xf01fef80,
+    [CCM_CCDR] = 0xfffeffff,
+    [CCM_CSR] = 0xffffffff,
+    [CCM_CCSR] = 0xfffffef2,
+    [CCM_CACRR] = 0xfffffff8,
+    [CCM_CBCDR] = 0xc1f8e000,
+    [CCM_CBCMR] = 0xfc03cfff,
+    [CCM_CSCMR1] = 0x80700000,
+    [CCM_CSCMR2] = 0xe01ff003,
+    [CCM_CSCDR1] = 0xfe00c780,
+    [CCM_CS1CDR] = 0xfe00fe00,
+    [CCM_CS2CDR] = 0xf8007000,
+    [CCM_CDCDR] = 0xf00fffff,
+    [CCM_CHSCCDR] = 0xfffc01ff,
+    [CCM_CSCDR2] = 0xfe0001ff,
+    [CCM_CSCDR3] = 0xffffc1ff,
+    [CCM_CDHIPR] = 0xffffffff,
+    [CCM_CTOR] = 0x00000000,
+    [CCM_CLPCR] = 0xf39ff01c,
+    [CCM_CISR] = 0xfb85ffbe,
+    [CCM_CIMR] = 0xfb85ffbf,
+    [CCM_CCOSR] = 0xfe00fe00,
+    [CCM_CGPR] = 0xfffc3fea,
+    [CCM_CCGR0] = 0x00000000,
+    [CCM_CCGR1] = 0x00000000,
+    [CCM_CCGR2] = 0x00000000,
+    [CCM_CCGR3] = 0x00000000,
+    [CCM_CCGR4] = 0x00000000,
+    [CCM_CCGR5] = 0x00000000,
+    [CCM_CCGR6] = 0x00000000,
+    [CCM_CMEOR] = 0xafffff1f,
+};
+
+static const uint32_t analog_mask[CCM_ANALOG_MAX] = {
+    [CCM_ANALOG_PLL_ARM] = 0xfff60f80,
+    [CCM_ANALOG_PLL_USB1] = 0xfffe0fbc,
+    [CCM_ANALOG_PLL_USB2] = 0xfffe0fbc,
+    [CCM_ANALOG_PLL_SYS] = 0xfffa0ffe,
+    [CCM_ANALOG_PLL_SYS_SS] = 0x00000000,
+    [CCM_ANALOG_PLL_SYS_NUM] = 0xc0000000,
+    [CCM_ANALOG_PLL_SYS_DENOM] = 0xc0000000,
+    [CCM_ANALOG_PLL_AUDIO] = 0xffe20f80,
+    [CCM_ANALOG_PLL_AUDIO_NUM] = 0xc0000000,
+    [CCM_ANALOG_PLL_AUDIO_DENOM] = 0xc0000000,
+    [CCM_ANALOG_PLL_VIDEO] = 0xffe20f80,
+    [CCM_ANALOG_PLL_VIDEO_NUM] = 0xc0000000,
+    [CCM_ANALOG_PLL_VIDEO_DENOM] = 0xc0000000,
+    [CCM_ANALOG_PLL_ENET] = 0xffc20ff0,
+    [CCM_ANALOG_PFD_480] = 0x40404040,
+    [CCM_ANALOG_PFD_528] = 0x40404040,
+    [PMU_MISC0] = 0x01fe8306,
+    [PMU_MISC1] = 0x07fcede0,
+    [PMU_MISC2] = 0x005f5f5f,
+};
+
 static const char *imx6ul_ccm_reg_name(uint32_t reg)
 {
     static char unknown[20];
@@ -596,11 +652,8 @@  static void imx6ul_ccm_write(void *opaque, hwaddr offset, uint64_t value,
 
     trace_ccm_write_reg(imx6ul_ccm_reg_name(index), (uint32_t)value);
 
-    /*
-     * We will do a better implementation later. In particular some bits
-     * cannot be written to.
-     */
-    s->ccm[index] = (uint32_t)value;
+    s->ccm[index] = (s->ccm[index] & ccm_mask[index]) |
+                           ((uint32_t)value & ~ccm_mask[index]);
 }
 
 static uint64_t imx6ul_analog_read(void *opaque, hwaddr offset, unsigned size)
@@ -737,7 +790,8 @@  static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value,
          * the REG_NAME register. So we change the value of the
          * REG_NAME register, setting bits passed in the value.
          */
-        s->analog[index - 1] |= value;
+        s->analog[index - 1] = s->analog[index - 1] |
+                               (value & ~analog_mask[index - 1]);
         break;
     case CCM_ANALOG_PLL_ARM_CLR:
     case CCM_ANALOG_PLL_USB1_CLR:
@@ -762,7 +816,8 @@  static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value,
          * the REG_NAME register. So we change the value of the
          * REG_NAME register, unsetting bits passed in the value.
          */
-        s->analog[index - 2] &= ~value;
+        s->analog[index - 2] = s->analog[index - 2] &
+                               ~(value & ~analog_mask[index - 2]);
         break;
     case CCM_ANALOG_PLL_ARM_TOG:
     case CCM_ANALOG_PLL_USB1_TOG:
@@ -787,14 +842,14 @@  static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value,
          * the REG_NAME register. So we change the value of the
          * REG_NAME register, toggling bits passed in the value.
          */
-        s->analog[index - 3] ^= value;
+        s->analog[index - 3] = (s->analog[index - 3] &
+                                analog_mask[index - 3]) |
+                               ((value ^ s->analog[index - 3]) &
+                                ~analog_mask[index - 3]);
         break;
     default:
-        /*
-         * We will do a better implementation later. In particular some bits
-         * cannot be written to.
-         */
-        s->analog[index] = value;
+        s->analog[index] = (s->analog[index] & analog_mask[index]) |
+                           (value & ~analog_mask[index]);
         break;
     }
 }