diff mbox series

[V2,2/3] clk: vc5: Enable addition output configurations of the Versaclock

Message ID 20200502122126.188001-2-aford173@gmail.com
State Changes Requested, archived
Headers show
Series None | expand

Commit Message

Adam Ford May 2, 2020, 12:21 p.m. UTC 
The existing driver is expecting the Versaclock to be pre-programmed,
and only sets the output frequency.  Unfortunately, not all devices
are pre-programmed, and the Versaclock chip has more options beyond
just the frequency.

This patch enables the following additional features:

   - Programmable voltage: 1.8V, 2.5V, or 3.3V​
   - Slew Percentage of normal: 85%, 90%, or 100%
   - Output Type: LVPECL, CMOS, HCSL, or LVDS

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Rob Herring May 12, 2020, 10:05 p.m. UTC | #1 
On Sat, May 02, 2020 at 07:21:25AM -0500, Adam Ford wrote:
> The existing driver is expecting the Versaclock to be pre-programmed,
> and only sets the output frequency.  Unfortunately, not all devices
> are pre-programmed, and the Versaclock chip has more options beyond
> just the frequency.
> 
> This patch enables the following additional features:
> 
>    - Programmable voltage: 1.8V, 2.5V, or 3.3V​
>    - Slew Percentage of normal: 85%, 90%, or 100%
>    - Output Type: LVPECL, CMOS, HCSL, or LVDS
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>


> diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h
> new file mode 100644
> index 000000000000..c6a6a0946564
> --- /dev/null
> +++ b/include/dt-bindings/clk/versaclock.h

Belongs in binding patch.

> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +/* This file defines field values used by the versaclock 6 family
> + * for defining output type
> + */
> +
> +#define VC5_LVPECL	0
> +#define VC5_CMOS	1
> +#define VC5_HCSL33	2
> +#define VC5_LVDS	3
> +#define VC5_CMOS2	4
> +#define VC5_CMOSD	5
> +#define VC5_HCSL25	6
> -- 
> 2.25.1
>
Adam Ford May 12, 2020, 10:21 p.m. UTC | #2 
On Tue, May 12, 2020 at 5:05 PM Rob Herring <robh@kernel.org> wrote:
>
> On Sat, May 02, 2020 at 07:21:25AM -0500, Adam Ford wrote:
> > The existing driver is expecting the Versaclock to be pre-programmed,
> > and only sets the output frequency.  Unfortunately, not all devices
> > are pre-programmed, and the Versaclock chip has more options beyond
> > just the frequency.
> >
> > This patch enables the following additional features:
> >
> >    - Programmable voltage: 1.8V, 2.5V, or 3.3V
> >    - Slew Percentage of normal: 85%, 90%, or 100%
> >    - Output Type: LVPECL, CMOS, HCSL, or LVDS
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
>
>
> > diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h
> > new file mode 100644
> > index 000000000000..c6a6a0946564
> > --- /dev/null
> > +++ b/include/dt-bindings/clk/versaclock.h
>
> Belongs in binding patch.

I can do that, but the binding patch will have to be applied before
the rest of the series, or the source won't build because it's
referencing the bindings.  Is that OK?

adam
>
> > @@ -0,0 +1,13 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +
> > +/* This file defines field values used by the versaclock 6 family
> > + * for defining output type
> > + */
> > +
> > +#define VC5_LVPECL   0
> > +#define VC5_CMOS     1
> > +#define VC5_HCSL33   2
> > +#define VC5_LVDS     3
> > +#define VC5_CMOS2    4
> > +#define VC5_CMOSD    5
> > +#define VC5_HCSL25   6
> > --
> > 2.25.1
> >
Stephen Boyd May 29, 2020, 4:02 a.m. UTC | #3 
Quoting Adam Ford (2020-05-12 15:21:49)
> On Tue, May 12, 2020 at 5:05 PM Rob Herring <robh@kernel.org> wrote:
> >
> > On Sat, May 02, 2020 at 07:21:25AM -0500, Adam Ford wrote:
> > > The existing driver is expecting the Versaclock to be pre-programmed,
> > > and only sets the output frequency.  Unfortunately, not all devices
> > > are pre-programmed, and the Versaclock chip has more options beyond
> > > just the frequency.
> > >
> > > This patch enables the following additional features:
> > >
> > >    - Programmable voltage: 1.8V, 2.5V, or 3.3V
> > >    - Slew Percentage of normal: 85%, 90%, or 100%
> > >    - Output Type: LVPECL, CMOS, HCSL, or LVDS
> > >
> > > Signed-off-by: Adam Ford <aford173@gmail.com>
> >
> >
> > > diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h
> > > new file mode 100644
> > > index 000000000000..c6a6a0946564
> > > --- /dev/null
> > > +++ b/include/dt-bindings/clk/versaclock.h
> >
> > Belongs in binding patch.
> 
> I can do that, but the binding patch will have to be applied before
> the rest of the series, or the source won't build because it's
> referencing the bindings.  Is that OK?

Yes that's usually how it works.
diff mbox series

Patch

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index 81255d923f00..ad99d50b7b16 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -24,6 +24,8 @@ 
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+#include <dt-bindings/clk/versaclock.h>
+
 /* VersaClock5 registers */
 #define VC5_OTP_CONTROL				0x00
 
@@ -89,6 +91,28 @@ 
 
 /* Clock control register for clock 1,2 */
 #define VC5_CLK_OUTPUT_CFG(idx, n)	(0x60 + ((idx) * 0x2) + (n))
+#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT	5
+#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT)
+
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL	(VC5_LVPECL)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS		(VC5_CMOS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33	(VC5_HCSL33)
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS		(VC5_LVDS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2		(VC5_CMOS2)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD		(VC5_CMOSD)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25	(VC5_HCSL25)
+
+#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT	3
+#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_18	(0<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_25	(2<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_33	(3<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT	0
+#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_80	(0<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_85	(1<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_90	(2<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_100	(3<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
 #define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF	BIT(0)
 
 #define VC5_CLK_OE_SHDN				0x68
@@ -143,6 +167,8 @@  struct vc5_hw_data {
 	u32			div_int;
 	u32			div_frc;
 	unsigned int		num;
+	unsigned int		clk_output_cfg0;
+	unsigned int		clk_output_cfg0_mask;
 };
 
 struct vc5_driver_data {
@@ -567,6 +593,17 @@  static int vc5_clk_out_prepare(struct clk_hw *hw)
 	regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
 			   VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
 			   VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+	if (hwdata->clk_output_cfg0_mask) {
+		dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n",
+			hwdata->num, hwdata->clk_output_cfg0_mask,
+			hwdata->clk_output_cfg0);
+
+		regmap_update_bits(vc5->regmap,
+			VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
+			hwdata->clk_output_cfg0_mask,
+			hwdata->clk_output_cfg0);
+	}
+
 	return 0;
 }
 
@@ -666,6 +703,120 @@  static int vc5_map_index_to_output(const enum vc5_model model,
 	}
 }
 
+static int vc5_update_mode(struct device_node *np_output,
+			   struct vc5_hw_data *clk_out)
+{
+	u32 value;
+
+	if (!of_property_read_u32(np_output, "idt,mode", &value)) {
+		clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK;
+		switch (value) {
+		case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL:
+		case VC5_CLK_OUTPUT_CFG0_CFG_CMOS:
+		case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33:
+		case VC5_CLK_OUTPUT_CFG0_CFG_LVDS:
+		case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2:
+		case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD:
+		case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25:
+			clk_out->clk_output_cfg0 |=
+			    value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int vc5_update_power(struct device_node *np_output,
+			    struct vc5_hw_data *clk_out)
+{
+	u32 value;
+
+	if (!of_property_read_u32(np_output,
+				  "idt,voltage-microvolts", &value)) {
+		clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK;
+		switch (value) {
+		case 1800000:
+			clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18;
+			break;
+		case 2500000:
+			clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25;
+			break;
+		case 3300000:
+			clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int vc5_update_slew(struct device_node *np_output,
+			   struct vc5_hw_data *clk_out)
+{
+	u32 value;
+
+	if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) {
+		clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK;
+		switch (value) {
+		case 80:
+			clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80;
+			break;
+		case 85:
+			clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85;
+			break;
+		case 90:
+			clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90;
+			break;
+		case 100:
+			clk_out->clk_output_cfg0 |=
+			    VC5_CLK_OUTPUT_CFG0_SLEW_100;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int vc5_get_output_config(struct i2c_client *client,
+				 struct vc5_hw_data *clk_out)
+{
+	struct device_node *np_output;
+	char *child_name;
+	int ret = 0;
+
+	child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1);
+	np_output = of_get_child_by_name(client->dev.of_node, child_name);
+	kfree(child_name);
+	if (!np_output)
+		goto output_done;
+
+	ret = vc5_update_mode(np_output, clk_out);
+	if (ret)
+		goto output_error;
+
+	ret = vc5_update_power(np_output, clk_out);
+	if (ret)
+		goto output_error;
+
+	ret = vc5_update_slew(np_output, clk_out);
+
+output_error:
+	if (ret) {
+		dev_err(&client->dev,
+			"Invalid clock output configuration OUT%d\n",
+			clk_out->num + 1);
+	}
+
+	of_node_put(np_output);
+
+output_done:
+	return ret;
+}
+
 static const struct of_device_id clk_vc5_of_match[];
 
 static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id)
@@ -863,6 +1014,11 @@  static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id)
 				init.name);
 			goto err_clk;
 		}
+
+		/* Fetch Clock Output configuration from DT (if specified) */
+		ret = vc5_get_output_config(client, &vc5->clk_out[n]);
+		if (ret)
+			goto err_clk;
 	}
 
 	ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5);
diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h
new file mode 100644
index 000000000000..c6a6a0946564
--- /dev/null
+++ b/include/dt-bindings/clk/versaclock.h
@@ -0,0 +1,13 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* This file defines field values used by the versaclock 6 family
+ * for defining output type
+ */
+
+#define VC5_LVPECL	0
+#define VC5_CMOS	1
+#define VC5_HCSL33	2
+#define VC5_LVDS	3
+#define VC5_CMOS2	4
+#define VC5_CMOSD	5
+#define VC5_HCSL25	6