diff mbox series

[V1,4/4] usb: gadget: tegra-xudc: add port_speed_quirk

Message ID 1587022460-31988-5-git-send-email-nkristam@nvidia.com
State Deferred
Headers show
Series Tegra XUDC support on Tegra194 Soc | expand

Commit Message

Nagarjuna Kristam April 16, 2020, 7:34 a.m. UTC 
Add port_speed_quirk that modify below registers to limit/restore OTG
port speed to GEN1/GEN2.
SSPX_CORE_CNT56
SSPX_CORE_CNT57
SSPX_CORE_CNT65
SSPX_CORE_CNT66
SSPX_CORE_CNT67
SSPX_CORE_CNT72

The basic idea is to make SCD intentionally fail, reduce SCD timeout and
force device transit to TSEQ. Enable this flag to only Tegra194.

Based on work by WayneChang <waynec@nvidia.com>

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
 drivers/usb/gadget/udc/tegra-xudc.c | 106 ++++++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)

Comments

Thierry Reding April 28, 2020, 12:25 p.m. UTC | #1 
On Thu, Apr 16, 2020 at 01:04:20PM +0530, Nagarjuna Kristam wrote:
> Add port_speed_quirk that modify below registers to limit/restore OTG
> port speed to GEN1/GEN2.
> SSPX_CORE_CNT56
> SSPX_CORE_CNT57
> SSPX_CORE_CNT65
> SSPX_CORE_CNT66
> SSPX_CORE_CNT67
> SSPX_CORE_CNT72
> 
> The basic idea is to make SCD intentionally fail, reduce SCD timeout and
> force device transit to TSEQ. Enable this flag to only Tegra194.
> 
> Based on work by WayneChang <waynec@nvidia.com>
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
>  drivers/usb/gadget/udc/tegra-xudc.c | 106 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 106 insertions(+)

You're telling readers what you're doing, but after reading the commit
message, I have no idea why this is being done. Can you provide more
information on why exactly is this needed? Why do we have to limit the
OTG port speed?

Thierry
Nagarjuna Kristam May 4, 2020, 4:03 a.m. UTC | #2 
On 28-04-2020 17:55, Thierry Reding wrote:
> 
> On Thu, Apr 16, 2020 at 01:04:20PM +0530, Nagarjuna Kristam wrote:
>> Add port_speed_quirk that modify below registers to limit/restore OTG
>> port speed to GEN1/GEN2.
>> SSPX_CORE_CNT56
>> SSPX_CORE_CNT57
>> SSPX_CORE_CNT65
>> SSPX_CORE_CNT66
>> SSPX_CORE_CNT67
>> SSPX_CORE_CNT72
>>
>> The basic idea is to make SCD intentionally fail, reduce SCD timeout and
>> force device transit to TSEQ. Enable this flag to only Tegra194.
>>
>> Based on work by WayneChang<waynec@nvidia.com>
>>
>> Signed-off-by: Nagarjuna Kristam<nkristam@nvidia.com>
>> ---
>>   drivers/usb/gadget/udc/tegra-xudc.c | 106 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 106 insertions(+)
> You're telling readers what you're doing, but after reading the commit
> message, I have no idea why this is being done. Can you provide more
> information on why exactly is this needed? Why do we have to limit the
> OTG port speed?
> 
> Thierry
Will re-word the commit message to explain on why this is needed.

Thanks,
Nagarjuna
diff mbox series

Patch

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index fb01117..63484f98 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -158,6 +158,30 @@ 
 #define  SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK GENMASK(7, 0)
 #define  SSPX_CORE_CNT32_POLL_TBURST_MAX(x) ((x) & \
 					SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK)
+#define SSPX_CORE_CNT56 0x6fc
+#define  SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(x) ((x) & \
+				SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK)
+#define SSPX_CORE_CNT57 0x700
+#define  SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(x) ((x) & \
+				SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK)
+#define SSPX_CORE_CNT65 0x720
+#define  SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(x) ((x) & \
+				SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK)
+#define SSPX_CORE_CNT66 0x724
+#define  SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(x) ((x) & \
+				SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK)
+#define SSPX_CORE_CNT67 0x728
+#define  SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(x) ((x) & \
+				SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK)
+#define SSPX_CORE_CNT72 0x73c
+#define  SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK GENMASK(19, 0)
+#define  SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(x) ((x) & \
+				SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK)
 #define SSPX_CORE_PADCTL4 0x750
 #define  SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK GENMASK(19, 0)
 #define  SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3(x) ((x) & \
@@ -530,6 +554,7 @@  struct tegra_xudc_soc {
 	bool invalid_seq_num;
 	bool pls_quirk;
 	bool port_reset_quirk;
+	bool port_speed_quirk;
 	bool has_ipfs;
 };
 
@@ -599,6 +624,78 @@  static inline void dump_trb(struct tegra_xudc *xudc, const char *type,
 		trb->control);
 }
 
+static void tegra_xudc_limit_port_speed(struct tegra_xudc *xudc)
+{
+	u32 val;
+
+	/* limit port speed to gen 1 */
+	val = xudc_readl(xudc, SSPX_CORE_CNT56);
+	val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK);
+	val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x260);
+	xudc_writel(xudc, val, SSPX_CORE_CNT56);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT57);
+	val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK );
+	val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x6D6);
+	xudc_writel(xudc, val, SSPX_CORE_CNT57);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT65);
+	val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0x4B0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT66);
+	val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x4B0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT67);
+	val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x4B0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT67);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT72);
+	val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK);
+	val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x10);
+	xudc_writel(xudc, val, SSPX_CORE_CNT72);
+}
+
+static void tegra_xudc_restore_port_speed(struct tegra_xudc *xudc)
+{
+	u32 val;
+
+	/* restore port speed to gen2 */
+	val = xudc_readl(xudc, SSPX_CORE_CNT56);
+	val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK);
+	val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x438);
+	xudc_writel(xudc, val, SSPX_CORE_CNT56);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT57);
+	val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK );
+	val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x528);
+	xudc_writel(xudc, val, SSPX_CORE_CNT57);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT65);
+	val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0xE10);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT66);
+	val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x348);
+	xudc_writel(xudc, val, SSPX_CORE_CNT66);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT67);
+	val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK);
+	val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x5a0);
+	xudc_writel(xudc, val, SSPX_CORE_CNT67);
+
+	val = xudc_readl(xudc, SSPX_CORE_CNT72);
+	val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK);
+	val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x1c21);
+	xudc_writel(xudc, val, SSPX_CORE_CNT72);
+}
+
 static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
 {
 	int err;
@@ -631,6 +728,9 @@  static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
 
 	reinit_completion(&xudc->disconnect_complete);
 
+	if (xudc->soc->port_speed_quirk)
+		tegra_xudc_restore_port_speed(xudc);
+
 	phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG, USB_ROLE_NONE);
 
 	pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >>
@@ -3274,6 +3374,9 @@  static void tegra_xudc_device_params_init(struct tegra_xudc *xudc)
 		xudc_writel(xudc, val, BLCG);
 	}
 
+	if (xudc->soc->port_speed_quirk)
+		tegra_xudc_limit_port_speed(xudc);
+
 	/* Set a reasonable U3 exit timer value. */
 	val = xudc_readl(xudc, SSPX_CORE_PADCTL4);
 	val &= ~(SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK);
@@ -3513,6 +3616,7 @@  static struct tegra_xudc_soc tegra210_xudc_soc_data = {
 	.invalid_seq_num = true,
 	.pls_quirk = true,
 	.port_reset_quirk = true,
+	.port_speed_quirk = false,
 	.has_ipfs = true,
 };
 
@@ -3526,6 +3630,7 @@  static struct tegra_xudc_soc tegra186_xudc_soc_data = {
 	.invalid_seq_num = false,
 	.pls_quirk = false,
 	.port_reset_quirk = false,
+	.port_speed_quirk = false,
 	.has_ipfs = false,
 };
 
@@ -3539,6 +3644,7 @@  static struct tegra_xudc_soc tegra194_xudc_soc_data = {
 	.invalid_seq_num = false,
 	.pls_quirk = false,
 	.port_reset_quirk = false,
+	.port_speed_quirk = true,
 	.has_ipfs = false,
 };