| Message ID | 20200329170538.25449-14-pragnesh.patel@sifive.com |
|---|---|
| State | Superseded |
| Delegated to: | Andes |
| Headers | show |
| Series | RISC-V SiFive FU540 support SPL | expand |
Hi Pragnesh, On Mon, Mar 30, 2020 at 1:07 AM Pragnesh Patel <pragnesh.patel@sifive.com> wrote: > > With sifive_fu540_defconfig: > > User can use FSBL or u-boot-spl.bin anyone at a time. > > For FSBL, > fsbl->fw_payload.bin(opensbi+u-boot) nits: need a space before ( and around + > > For u-boot-spl.bin, > u-boot-spl.bin->FIT image(opensbi+u-boot+dtb) nits: need a space before ( and around + > > U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > image u-boot.itb from 1st partition of SD card (replace fw_payload.bin > with u-boot.itb) into RAM. > > U-Boot SPL expects u-boot.itb FIT image in the 1st partition of SD > card irrespective of GUID > > Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> > --- > configs/sifive_fu540_defconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig > index 6d61e6c960..4fa4e1520f 100644 > --- a/configs/sifive_fu540_defconfig > +++ b/configs/sifive_fu540_defconfig > @@ -12,3 +12,14 @@ CONFIG_DISPLAY_BOARDINFO=y > CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > CONFIG_SYS_RELOC_GD_ENV_ADDR=y > CONFIG_DM_MTD=y > +CONFIG_SPL_SEPARATE_BSS=y > +CONFIG_SPL=y > +CONFIG_SPL_MMC_SUPPORT=y > +CONFIG_SPL_SPI_SUPPORT=y > +CONFIG_SPL_YMODEM_SUPPORT=y > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y > +CONFIG_SPL_CLK=y > +CONFIG_SPL_PAYLOAD="u-boot.itb" > +CONFIG_SPL_GPIO_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x3000 > +CONFIG_SIFIVE_FU540_DDR=y > -- Please do the defconfig update via the following way: $ make sifive_fu540_defconfig $ make savedefconfig $ cp defconfig configs/sifive_fu540_defconfig Regards, Bin
Hi Bin, >-----Original Message----- >From: Bin Meng <bmeng.cn@gmail.com> >Sent: 20 April 2020 15:05 >To: Pragnesh Patel <pragnesh.patel@sifive.com> >Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Atish Patra ><atish.patra@wdc.com>; Palmer Dabbelt <palmerdabbelt@google.com>; Paul >Walmsley <paul.walmsley@sifive.com>; Jagan Teki ><jagan@amarulasolutions.com>; Troy Benjegerdes ><troy.benjegerdes@sifive.com>; Anup Patel <anup.patel@wdc.com>; Sagar >Kadam <sagar.kadam@sifive.com>; Rick Chen <rick@andestech.com>; Palmer >Dabbelt <palmer@dabbelt.com> >Subject: Re: [PATCH v6 13/17] configs: fu540: Add config options for U-Boot >SPL > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >Hi Pragnesh, > >On Mon, Mar 30, 2020 at 1:07 AM Pragnesh Patel ><pragnesh.patel@sifive.com> wrote: >> >> With sifive_fu540_defconfig: >> >> User can use FSBL or u-boot-spl.bin anyone at a time. >> >> For FSBL, >> fsbl->fw_payload.bin(opensbi+u-boot) > >nits: need a space before ( and around + Will update in v7. > >> >> For u-boot-spl.bin, >> u-boot-spl.bin->FIT image(opensbi+u-boot+dtb) > >nits: need a space before ( and around + Will update in v7. > >> >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT >> image u-boot.itb from 1st partition of SD card (replace fw_payload.bin >> with u-boot.itb) into RAM. >> >> U-Boot SPL expects u-boot.itb FIT image in the 1st partition of SD >> card irrespective of GUID >> >> Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> >> --- >> configs/sifive_fu540_defconfig | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/configs/sifive_fu540_defconfig >> b/configs/sifive_fu540_defconfig index 6d61e6c960..4fa4e1520f 100644 >> --- a/configs/sifive_fu540_defconfig >> +++ b/configs/sifive_fu540_defconfig >> @@ -12,3 +12,14 @@ CONFIG_DISPLAY_BOARDINFO=y >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y >> CONFIG_DM_MTD=y >> +CONFIG_SPL_SEPARATE_BSS=y >> +CONFIG_SPL=y >> +CONFIG_SPL_MMC_SUPPORT=y >> +CONFIG_SPL_SPI_SUPPORT=y >> +CONFIG_SPL_YMODEM_SUPPORT=y >> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y >> +CONFIG_SPL_CLK=y >> +CONFIG_SPL_PAYLOAD="u-boot.itb" >> +CONFIG_SPL_GPIO_SUPPORT=y >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 >> +CONFIG_SIFIVE_FU540_DDR=y >> -- > >Please do the defconfig update via the following way: > >$ make sifive_fu540_defconfig >$ make savedefconfig >$ cp defconfig configs/sifive_fu540_defconfig Will update in v7. > >Regards, >Bin
diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig index 6d61e6c960..4fa4e1520f 100644 --- a/configs/sifive_fu540_defconfig +++ b/configs/sifive_fu540_defconfig @@ -12,3 +12,14 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y +CONFIG_SPL_CLK=y +CONFIG_SPL_PAYLOAD="u-boot.itb" +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 +CONFIG_SIFIVE_FU540_DDR=y
With sifive_fu540_defconfig: User can use FSBL or u-boot-spl.bin anyone at a time. For FSBL, fsbl->fw_payload.bin(opensbi+u-boot) For u-boot-spl.bin, u-boot-spl.bin->FIT image(opensbi+u-boot+dtb) U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT image u-boot.itb from 1st partition of SD card (replace fw_payload.bin with u-boot.itb) into RAM. U-Boot SPL expects u-boot.itb FIT image in the 1st partition of SD card irrespective of GUID Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> --- configs/sifive_fu540_defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)