| Message ID | 20110630155725.GA9765@redhat.com |
|---|---|
| State | New |
| Headers | show |
On 06/30/2011 05:57 PM, Michael S. Tsirkin wrote: > Support build on rhel 5.X where we have syscall for eventfd but not > userspace wrapper. > > (cherry-picked from commit 9e3269181e9bc56feb43bcd4e8ce0b82cd543e65 > in qemu-kvm.git). > > Signed-off-by: Michael S. Tsirkin<mst@redhat.com> > --- > > Changes from v1: > checkpatch fix > address comments by agraf > verify we are on linux > > compat/sys/eventfd.h | 20 ++++++++++++++++++++ > configure | 6 ++++-- > 2 files changed, 24 insertions(+), 2 deletions(-) > create mode 100644 compat/sys/eventfd.h > > diff --git a/compat/sys/eventfd.h b/compat/sys/eventfd.h > new file mode 100644 > index 0000000..1801a5f > --- /dev/null > +++ b/compat/sys/eventfd.h > @@ -0,0 +1,20 @@ > +#ifndef _COMPAT_SYS_EVENTFD > +#define _COMPAT_SYS_EVENTFD > + > +#ifdef CONFIG_EVENTFD > + > +#ifndef __linux__ > +#error __linux__ is not defined: eventfd is only supported on linux > +#endif > + > +#include<unistd.h> > +#include<syscall.h> > + > +static inline int eventfd(int count, int flags) > +{ > + return syscall(SYS_eventfd, count, flags); > +} > + > +#endif > + > +#endif > diff --git a/configure b/configure > index 856b41e..6f7dd74 100755 > --- a/configure > +++ b/configure > @@ -822,7 +822,6 @@ esac > > [ -z "$guest_base" ]&& guest_base="$host_guest_base" > > - > default_target_list="" > > # these targets are portable > @@ -891,6 +890,9 @@ sparc64-bsd-user \ > " > fi > > +#compat headers > +QEMU_CFLAGS="$QEMU_CFLAGS -idirafter $source_path/compat" > + > if test x"$show_help" = x"yes" ; then > cat<< EOF > > @@ -2122,7 +2124,7 @@ int main(void) > return 0; > } > EOF > -if compile_prog "" "" ; then > +if compile_prog "-DCONFIG_EVENTFD" "" ; then > eventfd=yes > fi > Acked-by: Paolo Bonzini <pbonzini@redhat.com> Paolo
On 30 June 2011 16:57, Michael S. Tsirkin <mst@redhat.com> wrote: > diff --git a/configure b/configure > index 856b41e..6f7dd74 100755 > --- a/configure > +++ b/configure > @@ -822,7 +822,6 @@ esac > > [ -z "$guest_base" ] && guest_base="$host_guest_base" > > - > default_target_list="" > > # these targets are portable This hunk looks like a stray unrelated whitespace change? -- PMM
On Thu, Jun 30, 2011 at 06:27:13PM +0100, Peter Maydell wrote: > On 30 June 2011 16:57, Michael S. Tsirkin <mst@redhat.com> wrote: > > diff --git a/configure b/configure > > index 856b41e..6f7dd74 100755 > > --- a/configure > > +++ b/configure > > @@ -822,7 +822,6 @@ esac > > > > [ -z "$guest_base" ] && guest_base="$host_guest_base" > > > > - > > default_target_list="" > > > > # these targets are portable > > This hunk looks like a stray unrelated whitespace change? > > -- PMM It's unrelated but I don't believe it's stray. Seems too trivial to split this to a separate patch.
On Thu, Jun 30, 2011 at 6:57 PM, Michael S. Tsirkin <mst@redhat.com> wrote: > Support build on rhel 5.X where we have syscall for eventfd but not > userspace wrapper. > > (cherry-picked from commit 9e3269181e9bc56feb43bcd4e8ce0b82cd543e65 > in qemu-kvm.git). > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > > Changes from v1: > checkpatch fix > address comments by agraf > verify we are on linux > > compat/sys/eventfd.h | 20 ++++++++++++++++++++ > configure | 6 ++++-- > 2 files changed, 24 insertions(+), 2 deletions(-) > create mode 100644 compat/sys/eventfd.h > > diff --git a/compat/sys/eventfd.h b/compat/sys/eventfd.h > new file mode 100644 > index 0000000..1801a5f > --- /dev/null > +++ b/compat/sys/eventfd.h Since we have linux-headers directory now, the directory should be compat-headers. I'd also add 'linux' directory below that to avoid collisions, so the full path would be compat-headers/linux/sys/eventfd.h. > @@ -0,0 +1,20 @@ > +#ifndef _COMPAT_SYS_EVENTFD > +#define _COMPAT_SYS_EVENTFD > + > +#ifdef CONFIG_EVENTFD > + > +#ifndef __linux__ > +#error __linux__ is not defined: eventfd is only supported on linux > +#endif With the linux directory, this check wouldn't be needed. It's not incorrect and we could add more specific checks later (for example if SYS_eventfd is not defined). > + > +#include <unistd.h> > +#include <syscall.h> > + > +static inline int eventfd(int count, int flags) > +{ > + return syscall(SYS_eventfd, count, flags); > +} > + > +#endif > + > +#endif > diff --git a/configure b/configure > index 856b41e..6f7dd74 100755 > --- a/configure > +++ b/configure > @@ -822,7 +822,6 @@ esac > > [ -z "$guest_base" ] && guest_base="$host_guest_base" > > - > default_target_list="" > > # these targets are portable > @@ -891,6 +890,9 @@ sparc64-bsd-user \ > " > fi > > +#compat headers > +QEMU_CFLAGS="$QEMU_CFLAGS -idirafter $source_path/compat" Please use $source_path/compat-headers/$targetos/. > + > if test x"$show_help" = x"yes" ; then > cat << EOF > > @@ -2122,7 +2124,7 @@ int main(void) > return 0; > } > EOF > -if compile_prog "" "" ; then > +if compile_prog "-DCONFIG_EVENTFD" "" ; then > eventfd=yes > fi > > -- > 1.7.5.53.gc233e >
On Fri, Jul 01, 2011 at 11:05:28PM +0300, Blue Swirl wrote: > On Thu, Jun 30, 2011 at 6:57 PM, Michael S. Tsirkin <mst@redhat.com> wrote: > > Support build on rhel 5.X where we have syscall for eventfd but not > > userspace wrapper. > > > > (cherry-picked from commit 9e3269181e9bc56feb43bcd4e8ce0b82cd543e65 > > in qemu-kvm.git). > > > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > > --- > > > > Changes from v1: > > checkpatch fix > > address comments by agraf > > verify we are on linux > > > > compat/sys/eventfd.h | 20 ++++++++++++++++++++ > > configure | 6 ++++-- > > 2 files changed, 24 insertions(+), 2 deletions(-) > > create mode 100644 compat/sys/eventfd.h > > > > diff --git a/compat/sys/eventfd.h b/compat/sys/eventfd.h > > new file mode 100644 > > index 0000000..1801a5f > > --- /dev/null > > +++ b/compat/sys/eventfd.h > > Since we have linux-headers directory now, the directory should be > compat-headers. I'd also add 'linux' directory below that to avoid > collisions, so the full path would be > compat-headers/linux/sys/eventfd.h. > I'll make it compat-headers/sys/eventfd.h. Actually this header is useful for non-linux as well: CONFIG_EVENTFD is not defined there which in theory makes it possible to include sys/eventfd.h without ifdefs. > > @@ -0,0 +1,20 @@ > > +#ifndef _COMPAT_SYS_EVENTFD > > +#define _COMPAT_SYS_EVENTFD > > + > > +#ifdef CONFIG_EVENTFD > > + > > +#ifndef __linux__ > > +#error __linux__ is not defined: eventfd is only supported on linux > > +#endif > > With the linux directory, this check wouldn't be needed. It's not > incorrect and we could add more specific checks later (for example if > SYS_eventfd is not defined). Yes, it's not incorrect because it is nested within CONFIG_EVENTFD. If CONFIG_EVENTFD is set and SYS_eventfd is not defined then there's a bug in the configure script. > > + > > +#include <unistd.h> > > +#include <syscall.h> > > + > > +static inline int eventfd(int count, int flags) > > +{ > > + return syscall(SYS_eventfd, count, flags); > > +} > > + > > +#endif > > + > > +#endif > > diff --git a/configure b/configure > > index 856b41e..6f7dd74 100755 > > --- a/configure > > +++ b/configure > > @@ -822,7 +822,6 @@ esac > > > > [ -z "$guest_base" ] && guest_base="$host_guest_base" > > > > - > > default_target_list="" > > > > # these targets are portable > > @@ -891,6 +890,9 @@ sparc64-bsd-user \ > > " > > fi > > > > +#compat headers > > +QEMU_CFLAGS="$QEMU_CFLAGS -idirafter $source_path/compat" > > Please use $source_path/compat-headers/$targetos/. I think it's best to keep it simple. When we have many compat headers we will see how to split them best. If most of the code turns out to be common we will want to avoid duplicating it. > > + > > if test x"$show_help" = x"yes" ; then > > cat << EOF > > > > @@ -2122,7 +2124,7 @@ int main(void) > > return 0; > > } > > EOF > > -if compile_prog "" "" ; then > > +if compile_prog "-DCONFIG_EVENTFD" "" ; then > > eventfd=yes > > fi > > > > -- > > 1.7.5.53.gc233e > >
diff --git a/compat/sys/eventfd.h b/compat/sys/eventfd.h new file mode 100644 index 0000000..1801a5f --- /dev/null +++ b/compat/sys/eventfd.h @@ -0,0 +1,20 @@ +#ifndef _COMPAT_SYS_EVENTFD +#define _COMPAT_SYS_EVENTFD + +#ifdef CONFIG_EVENTFD + +#ifndef __linux__ +#error __linux__ is not defined: eventfd is only supported on linux +#endif + +#include <unistd.h> +#include <syscall.h> + +static inline int eventfd(int count, int flags) +{ + return syscall(SYS_eventfd, count, flags); +} + +#endif + +#endif diff --git a/configure b/configure index 856b41e..6f7dd74 100755 --- a/configure +++ b/configure @@ -822,7 +822,6 @@ esac [ -z "$guest_base" ] && guest_base="$host_guest_base" - default_target_list="" # these targets are portable @@ -891,6 +890,9 @@ sparc64-bsd-user \ " fi +#compat headers +QEMU_CFLAGS="$QEMU_CFLAGS -idirafter $source_path/compat" + if test x"$show_help" = x"yes" ; then cat << EOF @@ -2122,7 +2124,7 @@ int main(void) return 0; } EOF -if compile_prog "" "" ; then +if compile_prog "-DCONFIG_EVENTFD" "" ; then eventfd=yes fi
Support build on rhel 5.X where we have syscall for eventfd but not userspace wrapper. (cherry-picked from commit 9e3269181e9bc56feb43bcd4e8ce0b82cd543e65 in qemu-kvm.git). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- Changes from v1: checkpatch fix address comments by agraf verify we are on linux compat/sys/eventfd.h | 20 ++++++++++++++++++++ configure | 6 ++++-- 2 files changed, 24 insertions(+), 2 deletions(-) create mode 100644 compat/sys/eventfd.h